This Solicitation opportunity from Department Of Defense was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PARTS KIT, TRACK SHO

Closed

SPE7L3-26-T-051QFederal

Submission Closed06/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

SLED

Genie S-85 HF Telescopic Boom Lift

Solicitation # ITB FFS 26 27 44

The Florida Department of Agriculture and Consumer Services, Florida Forest Service, is soliciting competitive bids for the purchase and delivery of one new, unused Genie S-85 HF Telescopic Boom Lift. The equipment, which must feature 4WD and either foam-filled turf and sand tires or air-filled flotation tires, will be used primarily for harvesting seed cones in forestry operations. No substitutions for the specified brand or model are permitted. The successful vendor must deliver and offload the equipment at the FFS Central Shop in Lake City, Florida, by June 30, 2027. The contract will be awarded to the responsive and responsible vendor offering the lowest grand total price. Bids must be submitted in sealed envelopes by September 28, 2026, and must include an acknowledgement form, a completed price sheet, and a forced labor certification. Preference may be given to Florida-based businesses, certified business enterprises, and those with drug-free workplace certifications. Payment will be made via state government warrant upon satisfactory delivery and inspection, subject to a 1% transaction fee and annual legislative appropriation. The vendor retains all risk of loss until the Department formally accepts the delivery.

Department of Agriculture and Consumer Services

POSTED

DEADLINE

FDOT D2 Purchase of a Weiler G65 Motor Grader

Solicitation # DOT-ITB-27-2002-JB

The Florida Department of Transportation District 2 is soliciting sealed bids under solicitation number DOT-ITB-27-2002-JB for the procurement of one new Weiler G65 Motor Grader. The equipment must be delivered on or before June 30, 2027, and must strictly adhere to the specifications in Exhibit A, as alternate brands will not be considered. The unit must comply with U.S. Department of Transportation Motor Vehicle Safety Standards, as well as the latest ANSI and OSHA standards. Bids must be submitted in PDF format to the designated email address by 2:00 p.m. local time on September 28, 2026. The contract will be awarded to the lower responsible bidder. Required submission documents include the Exhibit B Bid Sheet, Vendor Certification Regarding Scrutinized Companies Lists, In-State Preference Form, Drug-Free Workplace Program Certification, E-Verify Form, and a Foreign Country of Concern Attestation. The awardee must also provide a notarized affidavit regarding labor and services. The vendor must comply with Title VI of the Civil Rights Act of 1964, Florida Statute s.20.055(5), and the general contract conditions outlined in form PUR 1000. All payments are subject to the MyFloridaMarketPlace transaction fee and are contingent upon annual legislative appropriation.

Florida Department of Transportation

POSTED

DEADLINE

Trailer-Mounted Vacuum Excavator

Solicitation # FA860126Q0149

Solicitation FA860126Q0149 is a request for quotation for the procurement of one trailer-mounted vacuum excavator for the 88th Communications Squadron at Wright Patterson AFB, Ohio. The equipment will be used for the non-destructive excavation of fiber optic cables and the removal of sludge from manhole systems. Technical specifications require a gross vehicle weight rating not exceeding 14,000 pounds, a minimum 300-gallon water capacity, and an engine of at least 38 horsepower. The system must include a hose support arm or boom, all necessary pumps and tooling, and a minimum one-year warranty. Delivery is required within 60 days after receipt of order. This is a firm-fixed-price contract under NAICS code 333120 and is not set aside for small businesses. Award will be based on a lowest price technically acceptable approach, evaluating the offeror's ability to meet the statement of work through provided specification sheets or capability statements. Mandatory requirements for all offerors include active SAM registration and CMMC Level 1 compliance, with self-certification recorded in the Supplier Performance Risk System. Quotes must be submitted electronically by September 21, 2026, at 12:00 PM EST, and must include a completed Required Information Sheet and detailed descriptions of the equipment to be considered.

POSTED

DEADLINE

Bobcat Utility Vehicles

Solicitation # 36C24126Q0782

The Department of Veterans Affairs is seeking quotes for the procurement of one Bobcat S86 T4 Skid Steer Loader and one Bobcat UW56 Utility Work Machine, including various attachments and accessories, for the Manchester VA Medical Center in New Hampshire. This is a brand-name only requirement, justified by the unique dual-function capabilities of the UW56 and compatibility with existing Bobcat attachments. The solicitation is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 333120. All equipment must be made in America and procured through Bobcat or an authorized dealer. To ensure a two-hour emergency service response time, the acquisition is restricted to vendors within a 100-mile radius of the Manchester VA. The contract requires simultaneous delivery of all items within 45 to 60 days after receipt of order. Warranty requirements include a standard one-year machine and two-year engine warranty for the UTV, and a two-year or 2,000-hour warranty for the skid steer, with the Department of Veterans Affairs named as the owner. Award decisions will be based on price, past performance, and speed of delivery. Interested offerors must submit their quotes by September 21, 2026, and include their Unique Entity Identifier and a statement of agreement with the solicitation terms.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Telehandler Skid Loader

Solicitation # 1240LP26Q0162

Solicitation 1240LP26Q0162 is a Request for Quotation issued by the USDA for the procurement of one new Telehandler Skid Loader with an 84-inch bucket, equivalent to a JCB 3TS-8W TeleSkid Loader. The equipment will be used by the USDA-ARS National Animal Disease Center in Ames, Iowa, for unloading and stacking feed and bedding, as well as loading feed ingredients into a TMR wagon. This is a total small business set-aside under NAICS code 333120, with a size standard of 1,250 employees. The anticipated contract will be a firm-fixed-price purchase order, with delivery required at the Ames, Iowa facility within 90 calendar days after the date of award. Award will be based on the Lowest Price Technically Acceptable (LPTA) method. To be considered, offerors must pass technical and past performance gates, which include meeting all salient characteristics of the equipment and providing written confirmation of an authorized dealership or certified service company located within 30 miles of the delivery site. Quotations must be submitted to Westley Bisson by September 14, 2026, at 1600 MT. Required documentation includes active SAM registration, Buy American certifications, and specific representations regarding domestic corporations and anti-discrimination laws. Questions regarding this solicitation must be submitted by September 7, 2026.

Csa Intermountain 4 Usda-Fs

POSTED

DEADLINE

D11 - (1) Articulating Boom Lift

Solicitation # SRC0000041788

The Ohio Department of Transportation is soliciting bids for the procurement of one JLG 340AJ Articulating Boom Lift or an approved equal for District 11. The required unit must meet minimum specifications including a 33 foot platform height, 19 foot horizontal reach, 500 lbs capacity, a platform rotator, and a 110V GFI protected outlet. Additional safety requirements include a tilt alarm indicator and an amber LED strobe system. Bidders must provide a standard manufacturer warranty and deliver parts and service manuals in PDF format. The requested delivery date is June 30, 2027, and all pricing must include delivery costs under F.O.B. Destination terms. The contract will be awarded to the lowest responsive and responsible bidder. To be considered, vendors must complete all tabs of the provided pricing spreadsheet, provide manufacturer documentation proving they are an authorized dealer, and submit the Affirmation and Disclosure Form regarding offshore services and Russian entities. Payment is processed via electronic funds transfer, with a standard 30 day term following the receipt of a proper invoice. Contractors must comply with all state and federal non-discrimination laws, including the Americans with Disabilities Act and Title VI of the Civil Rights Act, and must adhere to all ODOT security and safety regulations while on state property.

Dept Of Transportation

POSTED

DEADLINE

Complete Track Shoe Group Supply

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-234J

This contract is for the procurement of two track shoe assembly units, identified by NSN 2530-01-314-6415. The items are designated as critical application items and are associated with Caterpillar Inc part number 3P1027 and Intertractor America Corp part number 53778. The delivery is required within 168 days, with a need ship date of March 9, 2027, and an original required delivery date of April 12, 2027. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Strict packaging and marking requirements are mandated, including compliance with MIL-STD-2073-1E and MIL-STD-129. Items must be shipped in wooden crates capable of handling weights exceeding 3,200 lbs and delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The contract incorporates DLA master lists for technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Trailer-Mounted Vacuum Excavator System (Hydrovac)

POSTED

DEADLINE

Crane LMI System, Barge Integration and Components Installation

Solicitation # W912ES26QA112

The Department of Defense, through the W07V Endist St Paul office, is soliciting bids for the Crane LMI System, Barge Integration and Components Installation under solicitation number W912ES26QA112. This project falls under NAICS code 333120 and is designated as a total Small Business Set Aside. Interested parties must submit their responses by September 25, 2026. The primary point of contact for this requirement is Karl Just. This procurement is managed out of Saint Paul, Minnesota, and focuses on the integration and installation of crane load moment indicator systems and related components on barges.

POSTED

DEADLINE

Plumas NF 1 EA Compact Mini Excavator w/2 buckets - SOLICITATION

Solicitation # 1240lp26q0190

Solicitation 1240LP26Q0190 is a request for quotation issued by the Plumas National Forest under the Department of Agriculture for the procurement of one compact mini excavator with two buckets. The equipment will be used for OHV route operations, repair, and maintenance within the forest. This acquisition is a total small business set-aside under NAICS code 333120, with a size standard of 1,250 employees. The procurement process is conducted in accordance with FAR Part 12 for commercial items. Interested small business concerns must submit their quotations by the deadline of September 21, 2026. The place of performance for this contract is located in Quincy, California.

Plumas National Forest

POSTED

DEADLINE

Notice of Proposed Procurement - Skid Steers - Group 2

Solicitation # M5000-26-5961/A

The Royal Canadian Mounted Police is seeking the procurement of two skid steers under solicitation number M5000-26-5961/A. This opportunity is restricted to suppliers who hold a Supply Arrangement under RFSA E60HS-25BCKH/A. The deadline for responses is September 25, 2026, with a required delivery date on or before March 31, 2027. The procurement process adheres to the Public Services and Procurement Canada Ineligibility and Suspension Policy and encourages the use of environmentally preferable packaging in accordance with the Greening Government Strategy. While open to qualified SA holders, the RCMP highlights the Indigenous Business Directory as a resource for Indigenous businesses to increase visibility and compete for set-aside contracts. Unsuccessful bidders may request a debriefing within fifteen working days following notification.

Royal Canadian Mounted Police

POSTED

2 days ago

DEADLINE

in 13 days

General Info

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-051Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 15

Solicitation

Response DeadlineJun 18

Deadline has passed

Submission Closed

06/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressUSA

Contacts

Matthew Curry

contact@example.gov

+1 (555) 000-0000

Full Description

PARTS KIT,TRACK SHO
PARTS KIT, TRACK SHOE CONNECTOR.
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
END CONNECTOR (1EA) AND CONNECTOR BOLT(1EA). IMPORTANT NOTE: THIS ITEM
REQUIRES TESTING AND CERTIFICATION OUTLINED IN QUALITY ASSURANCE
DOCUMENTS. THE DATA/RESULTS FROM THIS TESTING MUST BE AVAILABLE FOR
REVIEW BY A GOVERNMENT REPRESENTATIVE BEFORE ACCEPTANCE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
SAMPLING:
SPE7L3-26-T-051Q
SECTION B
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
QUALITY ASSURANCE PROVISIONS
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
CRITICAL APPLICATION ITEM
IAW BASIC DRAWING NR 19207 57K0986 REVISION NR A DTD 01/15/2014 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12268563 REVISION NR F DTD 01/15/2014 PART PIECE NUMBER:
IAW REFERENCE QAP 19207 12268563 REVISION NR D DTD 06/07/2006 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 57K0986 REVISION NR DTD 09/18/2023 PART PIECE NUMBER: 57K0986
IAW REFERENCE DRAWING NR 19207 12556911 REVISION NR A DTD 05/02/2016 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 57K7881 REVISION NR DTD 01/15/2014 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 57K0986 REVISION NR DTD 09/06/2001 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017048672 0001 EA 27.000
SPE7L3-26-T-051Q
SECTION B
PR: 7017048672 PRLI: 0001 CONT’D
NSN/MATERIAL:2530013393525
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION (SPI) AK13393525, DATED 09-06-2001.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:12/01/2026 Original Required Delivery Date:04/17/2027
SPE7L3-26-T-051Q NSN/Part Number: 2530-01-339-3525 Quantity: 27 EA Purchase Request: 7017048672QTY: 27 Delivery: 168 days ADO