Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pavement Marking and Joint Sealing

Open

State & Local

Response Deadline12/15/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves providing specialized pavement marking and joint sealing services for airfield projects located in Johnson County, Kansas. The selected contractor will support prime contractors by performing saw cutting, installing backer rods, and applying joint materials and pavement marking paint, with compensation based on square footage. The primary objective is the delivery of fully marked airfield surfaces and professionally sealed concrete joints. The project is categorized under NAICS code 238990 and was posted on November 12, 2026. Interested parties must submit their responses by the deadline of December 15, 2026. Further details and submission guidelines can be accessed through the Johnson County procurement portal.

General Info

Pavement marking and joint sealing subcontract for airfield projects in Johnson County, Kansas.

Agency

Kansas → Johnson County

NAICS

238990 - All Other Specialty Trade Contractors

Place of Performance

KS, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-057.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Johnson County Airport Commission (JCAC) On-Call Airfield Paving Repair

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineDec 15

Submission deadline

Response Deadline

12/15/2026, 02:00:00 PM CSTin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyKansas → Johnson County

ContactsNo contacts available

OfficeN/A

Organization / AgencyKansas → Johnson County

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Applies pavement markings and installs joint sealant for prime contractors on Johnson County, Kansas airfield projects. Performs saw cutting, installation of backer rods, and application of joint material and pavement marking paint per square foot. Delivers marked airfield surfaces and sealed concrete joints.

Similar Contracts

Same NAICS industry code

Site Completion and Surface WorkThis subcontract, titled Site Completion and Surface Work, is issued by Gregg Drilling, LLC and is specifically set aside for Disadvantaged Business Enterprises under the Department of Transportation. The scope of work focuses on providing surface protection and access points for monitoring well projects, which includes the installation of 12-inch traffic-rated well boxes and the construction of well pads using either concrete or gravel. Additionally, the contractor is responsible for installing construction fencing and performing final site clean-up to deliver secured, completed well pads. The opportunity is categorized under NAICS code 238990 and was posted on November 12, 2026. Interested parties must submit their responses by the deadline of December 15, 2026. The project is associated with the City Morro Bay Recycled Water Facilities monitoring wells.

Gregg Drilling, LLC

POSTED

about 3 hours ago

DEADLINE

in about 1 month

MAIN WASTEWATER TREATMENT PLANT SECONDARY REACTORS REHABILITATION,PHASE 2, SPECIFICATION SD-462

Solicitation # main-wastewater-treatment-plant-secondary-reactors-rehabilitationphase-2-specification-sd-462

J.F. Shea Construction, Inc. is seeking bids from subcontractors and suppliers for Phase 2 of the Main Wastewater Treatment Plant Secondary Reactors Rehabilitation project located in California. The scope of work is extensive, covering demolition, saw-cutting, concrete coring, hazardous materials handling, AC paving, ready-mix concrete, reinforcing and structural steel, miscellaneous metals, waterproofing, access and vault hatches, painting, coatings, equipment, and electrical services. This solicitation is specifically set aside for certified small businesses, including Service-Disabled Veteran Owned, Veteran Owned, Women-Owned, and Disadvantaged Business Enterprises. Interested parties must submit their responses by November 18, 2026. Primary coordination for this opportunity is managed by Lori Olivas.

J.F. Shea Construction, Inc.

POSTED

about 3 hours ago

DEADLINE

PURIFIED WATER REPLENISHMENT SAN JACINTO VALLEY ADVANCED WATER PURIFICATION FACILITY SPECIFICATION NO. 1472W

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-specification-0

J.F. Shea Construction, Inc. is seeking bids from qualified DBE subcontractors and suppliers for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility project in San Jacinto, California. The project, owned by the Eastern Municipal Water District, involves a wide array of work items including AC paving, concrete, structural steel, HVAC, electrical, instrumentation, and various interior and exterior finishing trades. Bids are due by November 17, 2026, at 10:00 A.M. Interested parties can access plans and specifications via the District's PlanetBids procurement portal or at the J.F. Shea office in Walnut. Potential subcontractors are expected to be bondable, with J.F. Shea offering to cover up to 1% of bond costs. All submissions must strictly adhere to the provided plans and specifications, particularly regarding warranty requirements, as standard manufacturer warranties that do not meet owner specifications will be rejected.

J.F. Shea Construction, Inc.

POSTED

about 3 hours ago

DEADLINE

Athletic Surface Installation (BSS-100 or Equivalent)This subcontract for Athletic Surface Installation involves the delivery of a competition-ready synthetic running track system for Plainfield Public Schools facility projects. The scope of work requires the application of an NFHS-compliant certified line marking system and the installation of a BSS-100 polyurethane paved mat structural spray system or an approved equivalent. To ensure quality and technical standards, the project mandates that an ASBA Certified Track Builder be employed for performance or direct supervision. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 238990. The solicitation was posted on November 12, 2026, with a response deadline set for December 7, 2026. The final deliverable is a fully resurfaced and certified running track ready for competitive athletic use.

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

RFP #2027-0002 Track Replacement Resurfacing Project

Solicitation # 2027-0002

Plainfield Public Schools is soliciting sealed bids for the renovation of the running track at Plainfield High School in Connecticut. The project requires a qualified athletic-surface contractor to provide a complete, competition-ready system, which includes the removal and legal disposal of the existing synthetic surface, pulverizing the asphalt base to a depth of eight inches, and installing a BSS-100 polyurethane paved mat structural spray system or an approved equivalent. The scope also encompasses laser grading to ASBA tolerances, a one percent cross slope toward the infield, and the installation of NFHS-compliant certified line markings. The contract is structured as a firm, lump-sum price agreement with an anticipated award date of December 2026. Payment terms include a 15 percent deposit upon acceptance, followed by bi-monthly payments based on a schedule of values. Award decisions will be based on the best interest of the District rather than the lowest price, with evaluation factors including technical approach, materials, and the qualifications of key personnel, specifically requiring an ASBA Certified Track Builder. Contractors must provide a performance bond for 100 percent of the contract cost and evidence of insurance within ten business days of the award. Submissions must be delivered as two hard copies to the Superintendent of Plainfield Public Schools by the specified deadline.

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

False Bottom Cleaning and Stone Replacement

Triple A S.A. E.S.P.

POSTED

about 5 hours ago

DEADLINE

Heavy Machinery Rigging and Facility ExtractionThis subcontract for Heavy Machinery Rigging and Facility Extraction involves the physical lifting, moving, and extraction of heavy industrial CTE equipment for prime contractors working on Campbell County School District No. 1 projects. The scope of work specifically focuses on the safe removal of assets from G Building, including CNC machines, automotive lifts, and lathes, using forklifts, cranes, and specialized rigging equipment while ensuring strict facility protection measures are in place. Qualified providers must possess heavy-lift certifications and maintain appropriate rigging insurance to perform these services. The project is categorized under NAICS code 238990, with a response deadline set for December 1, 2026.

Campbell County School District

POSTED

about 6 hours ago

DEADLINE

Existing AMH Sorter RemovalThis subcontract opportunity with San Diego County involves the removal and disposal of a legacy automated materials handler AMH sorter. The selected contractor will be responsible for dismantling the existing unit and transporting it from the facility using appropriate rigging equipment and hauling vehicles, ensuring all activities comply with established County safety and disposal regulations. The project is located in San Diego and falls under NAICS code 238990. Interested parties must submit their responses by the deadline of December 8, 2026.

San Diego County

POSTED

about 6 hours ago

DEADLINE

Structural Demolition ServicesThis subcontract for Structural Demolition Services involves performing demolition work for prime contractors on Georgia Department of Transportation projects. The scope of work includes the teardown of structures utilizing specialized equipment such as hydraulic shears, wrecking balls, and excavators. The selected provider is responsible for delivering fully demolished structures and a cleared site while maintaining strict adherence to safety standards to protect the public and prevent damage to adjacent properties. The opportunity is categorized under NAICS code 238990 and was posted on November 12, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. This project requires the deployment of qualified personnel capable of meeting the rigorous safety and operational demands of state transportation infrastructure projects.

Department of Transportation

POSTED

about 7 hours ago

DEADLINE

Metal Beam Guard Fence Installation and RepairThis subcontract involves the installation and repair of metal beam guard fence systems for prime contractors working on Texas Department of Transportation highway maintenance projects within Val Verde County. The scope of work includes the removal of damaged guardrail components, driving posts, and the installation of metal beam rails, hardware, and end treatments. All work must be performed in strict accordance with TxDOT Standard Specifications for Construction and Safety to ensure a fully compliant final system. The opportunity was posted on November 12, 2026, with a response deadline of December 10, 2026. Classified under NAICS code 238990, the project is managed under the Texas Department of Transportation. Interested parties can find further details through the TxSmartBuy portal.

Texas Department of Transportation

POSTED

about 7 hours ago

DEADLINE

Specialties (Louvers & Vents)This subcontract opportunity is for the supply and installation of building specialties, specifically ventilation louvers and vents, for laboratory projects managed by the Texas Facilities Commission. The selected vendor will work under prime contractors to deliver fully installed ventilation components, and candidates must possess documented experience as a specialty trade contractor to be eligible. The project is managed by the Facilities Design & Construction agency in Texas under NAICS code 238990. Interested parties must submit their responses by the deadline of January 7, 2027.

Facilities Design & Construction

POSTED

about 7 hours ago

DEADLINE

in about 2 months

Lighting Controls & AutomationThis subcontract opportunity, titled Lighting Controls and Automation, involves the installation of specialized lighting and automated control systems for Texas Facilities Commission laboratory projects. Working under prime contractors, the selected provider will be responsible for installing lighting fixtures and associated control systems designed to meet specific laboratory requirements and energy efficiency standards. The final deliverable is a fully installed and programmed lighting control system. Interested parties must possess a valid electrical license to qualify for this work. The project is managed by the Facilities Design and Construction agency in Texas under NAICS code 238990. The solicitation was posted on November 12, 2026, and the deadline for responses is January 7, 2027.

Facilities Design & Construction

POSTED

about 7 hours ago

DEADLINE

in about 2 months

More opportunities from Kansas → Johnson County

Same awarding agency

Construction Debris Removal and DisposalThis subcontract opportunity involves the removal and legal disposal of construction waste for prime contractors working on airfield projects in Johnson County, Kansas. The selected provider will be responsible for hauling spoils, excavated materials, and general construction debris from the project sites to authorized disposal facilities to ensure a completely cleared site. The project is categorized under NAICS code 484220 and is managed by Johnson County, Kansas. Interested parties must submit their responses by the deadline of December 15, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Airfield Site Restoration (Sod & Mulch)This subcontract opportunity is for Airfield Site Restoration involving sod and mulch services for airfield projects in Johnson County, Kansas. The selected contractor will support prime contractors by performing seeding and mulching using hay, specifically excluding straw, and installing sod to ensure the successful restoration of vegetation and grass areas. The project falls under NAICS code 561730 and was posted on November 12, 2026. Interested parties must submit their responses by the deadline of December 15, 2026.

Landscaping Services

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Cast-In-Place Concrete InstallationThis subcontract for cast-in-place concrete installation involves providing specialized services for prime contractors on airfield projects located in Johnson County, Kansas. The scope of work encompasses the full installation process, including the placement of concrete material, forms, reinforcing material, and joint work, as well as the management of base aggregates and grading. All surface courses must be finished to a strict tolerance of 1/4 inch using a 12-foot straightedge to ensure the delivery of high-quality finished concrete pavement slabs. To ensure structural integrity and quality, all work must strictly adhere to ACI 301, 302, 305R, and 306R standards, along with ASTM C33, C94, C150, and C260 specifications. The opportunity was posted on November 12, 2026, with a response deadline of December 15, 2026. This project falls under NAICS code 238110 and is managed through the Johnson County government procurement system.

Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Asphalt Paving and Cold MillingThis subcontract for Asphalt Paving and Cold Milling involves providing specialized paving services for prime contractors on airfield projects within Johnson County, Kansas. The scope of work includes performing cold milling using self-propelled machinery for leveling and depth cuts, installing Aggregate Base Course (AB-3) and Hot Mix Asphalt (BM-2), and ensuring the complete removal of loose debris from all surfaces and gutters to deliver a smooth finished product. All operations must strictly adhere to the 2015 KDOT Standard Specifications for State Road and Bridge Construction, utilizing KDOT-certified Job-Mix Formulas. Interested parties should note that the response deadline for this opportunity is December 15, 2026.

Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Johnson County Airport Commission (JCAC) On-Call Airfield Paving Repair

Solicitation # 2026-057

The Johnson County Airport Commission is soliciting competitive sealed bids for on-call airfield paving repair services at the New Century AirCenter and Johnson County Executive Airport. This indefinite quantity contract, with no guaranteed minimum, will cover asphalt, concrete, and ancillary paving improvements. It is anticipated that up to two contractors will be awarded the work, with individual tasks generally limited to $75,000 and a total annual aggregate limit of $275,000. The initial term runs from February 1, 2027, through December 31, 2027, with the possibility of four successive twelve-month renewals. Awards are based on the lowest and best bid that complies with all mandatory specifications, specifically evaluating the total of Base Bid No. 1 while disregarding time and materials pricing and cash discounts. Contractors must adhere to strict safety and quality standards, including FAA Advisory Circular 150/5210-5 for vehicle markings and KDOT standards for asphalt paving. Key requirements include maintaining comprehensive general liability and workers' compensation insurance, providing performance bonds for projects exceeding $25,000, and implementing cybersecurity awareness education and response plans. Additionally, the contract mandates that all work products reflect the independent judgment of a qualified human professional, with any use of artificial intelligence requiring human review and approval.

Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Design & Engineering ServicesThis subcontract for Design and Engineering Services involves providing professional engineering and design support for prime contractors working on wastewater projects in Johnson County, Kansas. The selected provider will be responsible for executing progressive design development and hydraulic profiling through the use of specialized engineering software and modeling tools. Key deliverables include the production of final design documents, detailed hydraulic profiles, and comprehensive construction specifications. To be eligible for this engagement, the provider must hold a Professional Engineering licensure in the state of Kansas. The opportunity was posted on November 4, 2026, with a response deadline set for December 9, 2026. This project falls under NAICS code 541330 and is focused on supporting critical infrastructure improvements within the region.

Engineering Services

POSTED

DEADLINE

Electrical & Instrumentation (I&C)This subcontract for Electrical and Instrumentation (I&C) involves providing specialized electrical wiring, control panel installation, and instrumentation services for wastewater projects in Johnson County, Kansas. The scope of work includes the installation of power supplies, SCADA systems, sensors, and monitoring equipment to deliver a fully powered and automated pump station control system. The selected contractor must ensure all work complies with established electrical codes and Minimum Cyber Security Standards. Interested parties must submit their responses by December 9, 2026, under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical & Pump Systems InstallationThis subcontract for Mechanical and Pump Systems Installation involves the supply and installation of pumping equipment and mechanical piping for wastewater projects in Johnson County, Kansas. The scope of work includes the installation of industrial pumps, forcemains, valves, and hydraulic control systems, all of which must be integrated into the existing wastewater network according to specific hydraulic profiles and prevailing system codes. The final deliverable consists of fully installed and tested pumping systems and forcemains. The opportunity was posted on November 4, 2026, with a response deadline of December 9, 2026. Classified under NAICS code 238220, the project is managed by Johnson County, Kansas. Interested parties can find further details through the provided public bid link.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Pump Station Civil & Structural ConstructionThis subcontract for Pump Station Civil and Structural Construction involves the physical construction of pump station facilities for wastewater projects in Johnson County, Kansas. The selected contractor will be responsible for building complex treatment facilities and pump stations using concrete forms, cribbing, and scaffolding, all while ensuring that existing plant operations remain uninterrupted. The final deliverable is a fully completed and operational pump station structure that complies with all prevailing codes. The project requires the provision of Performance and Statutory Bonds to ensure completion and legal compliance. Interested parties must submit their responses by December 9, 2026. This opportunity falls under NAICS code 237110 and is managed by Johnson County, Kansas.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Progressive Design Build - Brush Creek Pump Station Improvements Project (MTM1-C080)

Solicitation # 2026-045

Johnson County, Kansas, is seeking a Design-Builder for the Brush Creek Pump Station Improvements Project (Contract No. MTM1-C080) through a three-phase Progressive Design-Build procurement process. The project involves replacing a pump station that has reached the end of its useful life, with a scope that includes preconstruction and design services based on a March 2026 Preliminary Engineering Report. The new facility must be designed to handle current flows and future wet weather flows resulting from the decommissioning of the Peak Excess Flow Treatment Facility. The procurement begins with a Request for Qualifications to shortlist three to five firms, followed by a Request for Proposal including cost submissions, and concluding with interviews to select a single firm for contract negotiations. The anticipated project timeline begins with a Notice to Proceed in June 2027, with design and GMP development continuing through September 2028 and construction starting in January 2029, targeting final completion by December 2030. Baseline cost estimates for the pump station are approximately 5.4 million dollars, with additional allocations for mobilization and home office overhead. Qualified respondents must be legally registered in Kansas, demonstrate bonding capacity up to 20 million dollars, and meet strict insurance and safety requirements. Evaluation is based on the greatest value to the county, considering factors such as project experience, personnel depth, and the proposed approach to design and construction planning. All submissions must be filed electronically via the IonWave portal by December 9, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Electrical Component SupplyThis subcontract agreement outlines the supply of electrical materials for prime contractors working on facility projects within Johnson County, Kansas. The scope of work includes the delivery of various components such as cable and conduit seals, outlet and pull boxes, conduit fittings, safety switches, fuses, conductors, raceways, and panelboards. To ensure quality and safety, all provided materials must be new and strictly adhere to UL, NEMA, and ASTM standards. A critical qualification for the manufacturer is a minimum of three years of experience in producing grounding materials. Interested parties must submit their responses by November 20, 2026, in accordance with the solicitation posted on October 29, 2026. The contract is categorized under NAICS code 423610 and focuses on the timely delivery of specified electrical components directly to the project sites.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical Grounding and Bonding ServicesThis subcontract for Electrical Grounding and Bonding Services involves the installation of electrical grounding systems for prime contractors on facility projects located in Johnson County, Kansas. The scope of work includes driving ground rods, installing plate electrodes, and bonding building frames and underground metal piping. To ensure system integrity, the contractor must perform Ground Rod Tests using the AC fall-of-potential method with a direct-reading single-test megger, ultimately delivering a fully installed system and certified test reports. Qualified candidates must possess at least three years of specialized experience in electrical grounding work. The solicitation was posted on October 29, 2026, with a response deadline of November 20, 2026. This opportunity falls under NAICS code 238210 and is managed by Johnson County, Kansas.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS