Pease ANGB, Newington NH, KC46A ADAL Airfield Pavements & Hydrant AND Repair Aircraft Parking Apron

This project and an updated pre-solicitation notice will be posted under Solicitation Number W912TF-17-R-0503 on March 30, 2017. Please utilize this solicitation number for all further notices in Fedbizopps and communication. The USPFO for NH, located at Pease Air National Guard Base (ANGB), Newington, NH, intends to issue a Request for Proposal (RFP) to award a single firm fixed-price contract for Construction of KC-46A ADAL Airfield Pavements & Hydrant Systems AND Repair Aircraft Parking Apron, Pease ANGB, Newington, NH. Construction services will consist of minor earthwork and grading; Fueling system repair and construction; Pavement demolition and repair of Portland Cement Concrete (PCC) and asphaltic pavements; and Airfield striping and marking. In addition to a base price for the work describe above the solicitation includes Government Options for this project. 1. Includes the removal of existing airfield markings and remarking of the southern half of the main parking apron to compliment the proposed parking plan. 2. Includes the demolition of the existing connector taxiway between the main parking apron and the quad apron. Work also includes final grading and restoration of turf/grass. Magnitude of the project is between $5,000,000 and $10,000,000. Construction/contract completion time is 610 calendar days after notice to proceed to include inspection and punch list. The North American Industry Classification System (NAICS) code for this work is 237120. This is a total small business set- aside. The small business size standard is $36.5 million average annual revenue for the previous three years. Your attention is directed to FAR CLAUSE 52.219-14 (b) (4) LIMITATIONS ON SUBCONTRACTING which states "By submission of an offer and execution of a contract, the Offeror /Contractor agrees that in performance of the contract in the case of a contract for Construction by a general contractors, the concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees" applies to this project. The tentative date for issuing the solicitation is on or about 9 November 2016. The tentative date for the pre- proposal conference is on-or about 16 November 2016, 9:00 a.m. local time at the Building 264, at Pease ANGB. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-proposal conference. The solicitation closing date is scheduled for on-or-about 9 December 2016. Actual dates and times will be identified in the solicitation. The source selection process will be conducted in accordance with FAR Part 15.3 and DFARS Part 215.3, source selection procedures. Evaluation factors include Technical, Past Performance and Price. The Government intends to award without discussions. Interested offerors must be registered in SAM. To register go to: https://www.sam.gov/portal/public/SAM/. You will need your DUNS number register. Instructions for registering are on the web page. The solicitation and associated information and the plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website on-line at https://www.fbo.gov/. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. FedBizOpps registration requires the following information: 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN), 2) DUNS Number and CAGE Code, 3) Telephone Number, 4) Email address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf. (Please note the registration for access to the secure site takes approximately 15 business days. PLAN ACCORDINGLY). Reference paragraph 4.7 of the Vendor Guide for instructions to obtain a MPIN to retrieve the specification and drawing documents. Contractors who do not already have a MPIN are advised that the normal processing is 7 to 15 business days to obtain a MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for other information. Bidders/offerors who have registered with FedBizOpps must access the data for this solicitation with their MPIN. Bidders/Offerors cannot log into the FedBizOpps home page and search for data. This solicitation is not a competitive bid and there will not be a formal public bid opening. DISCLAIMER: The official plans and specification are located on the official government web page and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to the FBO page for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. Place of performance is at Pease ANGB, Newington, NH.