This Government Contract opportunity from Massachusetts was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Permanent Impact Attenuator Supply & Installation

Closed

State & Local

Submission Closed08/25/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612

New

SLED

Public Safety Center Console Boat

Solicitation # IFB27-012

Glynn County, Georgia, through its Emergency Management Agency, is soliciting bids under IFB27-012 for the procurement of one new, current-production-year public safety center console vessel. The vessel is intended for law enforcement, search and rescue, emergency response, and disaster recovery operations within the county's coastal, tidal, and riverine environments. The required turnkey solution must include an approximately 23-foot vessel with a fiberglass hard-shell T-top, a propulsion system with at least 200 horsepower and hydraulic steering, a suitable trailer, and all necessary electronics, rigging, and navigation equipment. The successful contractor is also required to provide comprehensive orientation and training for county personnel along with all operation and maintenance documentation. Bids must be submitted electronically via the county's e-procurement portal by 1:30 pm on November 4, 2026. The contract will be awarded to the lowest responsive and responsible bidder based on a lump sum price, though a local vendor preference may apply if a qualified local bidder is within a specific price range of the lowest bid. Required submission documents include a W9, representation affidavit, legal and character qualifications, a supplier oath, a statement of assurance regarding non-discrimination, and at least three professional references. Delivery is FOB Destination to the Glynn County Emergency Management and Homeland Security agency, with payment terms set at thirty days following equipment acceptance.

EMERGENCY MANAGEMENT AGENCY

POSTED

DEADLINE

Marine-Grade Epoxy and Sealant SupplyThis subcontract for Marine-Grade Epoxy and Sealant Supply involves the provision of specialized saltwater-resistant epoxy injection resins and crack sealing compounds for prime contractors working on City of St. Petersburg pier projects. The scope of work includes the delivery of materials to the project site along with all necessary technical data sheets and safety data sheets. To ensure quality and durability in marine environments, the supplier must provide manufacturer certification specifically for marine applications. This opportunity is managed by Enterprise Facilities in Florida, with a response deadline set for November 5, 2026.

Enterprise Facilities

POSTED

DEADLINE

Supply of Check Valve (NSN 4820016915578)This subcontract involves the manufacture or procurement of one Check Valve, identified by NSN 4820016915578, to support Defense Logistics Agency weapons support maritime hardware and electrical contracts. The selected provider must ensure the component meets all technical specifications and is properly packaged for First Destination Transportation. The contract is governed by the Department of Defense and requires strict adherence to the Berry Amendment and the Buy American Act. Performance will take place in Mechanicsburg, Pennsylvania, with a response deadline set for November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of 2-Inch Automatic BOA Deck DrainsThis subcontract involves the manufacture or procurement of five 2-inch automatic BOA deck drains for the DLA Weapons Support Fluid Handling Division. The hardware must strictly adhere to NSN 2090-01-572-6651 and be certified free of intentionally added mercury. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The final units are to be delivered FOB Destination to the USS Halsey DDG 97. This requirement falls under NAICS code 336612 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Pilot Operated Pressure Relief Valves (MLCP Series)This subcontract, managed by the Department of Defense through the DLA Weapons Support Maritime Supply Chain, involves the procurement of one MLCP Series Pilot Operated Pressure Relief Valve. The equipment must strictly adhere to the technical specifications outlined under NSN 4820016296891 and is intended for use by prime contractors on Department of Defense projects. The contract requires that any ocean transportation utilized for delivery complies with U.S.-flag vessel requirements. Performance will take place at a designated government destination in FPO 09523, with the procurement falling under NAICS code 336612.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # N0010426QJC25

This fixed-price solicitation, issued under Emergency Acquisition Authority by the Navsup Weapon Systems Support Mech, seeks the teardown, evaluation, repair, and modification of the Shoe Set, Counter CL (NIIN: 012674906). The government requires a Repair Turnaround Time (RTAT) of 129 days, measured from the physical receipt of the asset at the contractor facility to the date of government acceptance. Failure to meet this RTAT will result in a per-unit, per-month price reduction. The contract includes an option for the government to increase the quantity of supplies by up to 100 percent of the initial item quantity. Key operational requirements include Government Source Inspection (GSI) and adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging. Freight is handled by the Navy as FOB Origin per the Commercial Asset Visibility (CAV) Statement of Work. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Evaluation of quotations will be based on Supplier Performance Risk System (SPRS) assessments regarding price and supplier risk, as well as compliance with Buy American and trade agreement policies. All repair work must align with the contractor's standard overhaul practices and approved technical documentation.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

20--WINDOW ASSEMBLY,HEA

Solicitation # N0010426RFG69

Solicitation N00104-26-R-FG69 is a fixed-price request for proposal issued by NAVSUP Weapon Systems Support for the procurement of Heated Head Window Assemblies. The material is designated as Special Emphasis Level I because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or the vessel. The scope includes the delivery of 15 units, with a final delivery deadline of 365 days after the contract effective date. Due to subvendor delays, the closing date for proposals has been extended to December 10, 2026. The contract mandates rigorous quality controls, including the requirement for an acceptable Quality Control Manual for award eligibility. Key technical requirements include quantitative chemical and mechanical analysis for window covers and frames, as well as hydrostatic pressure, optical, and thermal shock testing. All certification data must be submitted via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard for review and acceptance at least 20 days prior to shipment. The government will make a single award based on the most advantageous offer, weighing past performance as more important than price.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

20--PRAIRIE AIR,STBD, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QUB66

Solicitation N00104-25-Q-UB66 is a firm-fixed-price request for the teardown, evaluation, repair, and modification of one unit of the PRAIRIE AIR, STBD (NIIN 013255726). The project is managed by the NAVSUP Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania. The government requires a Repair Turnaround Time (RTAT) of 168 days after receipt of the asset, with a strict requirement that the awardee be an authorized repair source. Failure to meet the RTAT will result in a price reduction per unit per month, the specific amount of which must be proposed by the contractor. The award will be based on the most advantageous offer, with past performance weighted as more important than price. Technical requirements include adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with final inspection and acceptance occurring at the contractor's location. Offerors must submit their quotes electronically to Taylor R. Arroyo, including a detailed cost breakdown, throughput constraints, and a new unit price for comparison. The solicitation incorporates various FAR and DFARS clauses, including Buy American and CMMC cybersecurity requirements, and utilizes the Wide Area Workflow (WAWF) system for all invoicing and receiving reports.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Life Raft Repair Kits (NSN 4220-00-763-3766)This subcontract involves the procurement of 139 specialized life raft repair kits, identified by NSN 4220-00-763-3766, to support prime contractors fulfilling Department of Defense supply contracts. The selected provider is responsible for the manufacture or sourcing of these units, ensuring that all items are delivered as completed kits. A critical requirement for the award is that the manufacturer must be fully qualified at the time the contract is granted. Operational compliance is strictly mandated, requiring packaging and palletization to adhere to MIL-STD-2073-1E and RP001 standards. Additionally, any hazardous materials included in the kits must be labeled in accordance with DFARS 252.223-7001. The project falls under NAICS code 336612 and is managed through Construction & Equipment MRO SVC I for the Department of Defense.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1862

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine-Grade Cable and Connector SupplierThis subcontract agreement involves the supply of specialized, individually configured connectors and cables for prime contractors working on Met Office deep-sea buoy projects. The supplier is responsible for manufacturing or sourcing components that adhere to strict deep-sea pressure and corrosion specifications, utilizing water-blocked or armored cabling and high-grade materials such as titanium or stainless steel. All deliverables must comply with CPV 34930000 marine equipment standards to ensure durability in extreme underwater environments. The opportunity was posted on October 26, 2026, with a response deadline of November 30, 2026. Classified under NAICS code 336612, the contract focuses on the delivery of precision-engineered marine hardware tailored to the specific technical requirements of the Met Office's deep-sea operations.

POSTED

DEADLINE

Solicitation # N0010427QUA31

This solicitation, issued by the Navsup Weapon Systems Support Mech office, is for the repair, manufacture, inspection, testing, and packaging of a Left Hand (LH) LCU 1600 Class Marine Propeller (NSN 7HH 2010-01-607-6494). The government is seeking a single award based on a firm-fixed price, where past performance is weighted as more important than price. The scope includes the teardown and evaluation of the asset, with a requested Repair Turnaround Time (RTAT) of 118 days after receipt. Failure to meet this RTAT may result in a price reduction per unit per month, to be implemented via a reconciliation modification. The contractor must be an authorized repair source and adhere to strict quality and technical standards, including NAVSEA drawing 245-5110169 and MIL-STD packaging requirements. Key deliverables include inspection system reports and material composition certifications submitted via DD Form 1423. Administrative requirements include electronic invoicing through Wide Area Workflow (WAWF), Commercial Asset Visibility (CAV) reporting, and compliance with Cybersecurity Maturity Model Certification (CMMC) and IUID requirements. The award will be made to the offeror determined to be most advantageous to the government, considering price and past performance as evaluated through the Supplier Performance Risk System (SPRS).

Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the supply and installation of permanent impact attenuators, commonly known as crash cushions, at specific highway locations within District 6 to enhance roadside safety for motorists. These devices are designed to absorb and dissipate collision energy, reducing the severity of accidents when vehicles leave the roadway. All work must adhere to established engineering standards and safety protocols, ensuring long-term durability and effectiveness under varying weather and traffic conditions. The project is classified as a subcontract under NAICS code 336612, indicating specialized manufacturing and installation of vehicle safety equipment. The solicitation was posted on August 25, 2026, with the same date set as the response deadline, implying an immediate or expedited procurement timeline. The contracting authority is MASSDOT, the Massachusetts Department of Transportation, and the work is to be performed within District 6, though exact locations are not specified in the provided data. There is no set-aside designation, meaning the opportunity is open to all qualifying contractors without restrictions based on business size or ownership type. Interested parties must submit proposals through the designated online portal linked in the contract details, and all work is expected to meet the stringent quality and safety requirements mandated by state transportation regulations.