Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, HIGH LOCK

Active
SPE4A6-26-T-14SQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 12 units of PIN, HIGH LOCK with NSN 5315-01-670-6762 and part number HST11YV6-6, issued by the Department of Defense under solicitation SPE4A6-26-T-14SQ. Delivery is required within 84 days FOB origin, with no tolerance for quantity variance, and all items must be delivered to the specified DLA distribution facility in New Cumberland, Pennsylvania. The product must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA packaging guidelines, and all markings and identification must conform to RQ017 for bare item marking and RQ011 for removal of government identification from non-accepted supplies. Inspection and acceptance occur at the destination, and sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is each, priced at $12.00 per unit, with total contract value of $144.00. All shipments must align with DLA transportation procedures C19 and C20, and the required delivery date is December 14, 2026.

General Info

Procure 12 PIN HIGH LOCK units at $12 each, deliver by Dec 14, 2026, to New Cumberland, PA, per DLA specs.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14SQ for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ahoefa Simons De Fanti
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,HIGH LOCK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
HI-SHEAR CORPORATION 73197 P/N HST11YV6-6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017806144 0001 EA 12.000
NSN/MATERIAL:5315016706762
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-14SQ
SECTION B
PR: 7017806144 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:12/14/2026
SPE4A6-26-T-14SQ NSN/Part Number: 5315-01-670-6762 Quantity: 12 EA Purchase Request: 7017806144QTY: 12 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14TG
The contract is for 64 flat washers identified by NSN 5310-01-617-7319, with delivery required within five days FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at origin, with compliance governed by stringent quality requirements referencing the DLA Master List of Technical and Quality Requirements, including MIL-STD-1916 or ASQ H1331 for sampling, where zero non-conformances are mandatory unless otherwise stated. The item is designated as a critical application item and must conform to NASM21299 Revision 4, with packaging adhering to MIL-STD-2073-1E and marking in accordance with MIL-STD-129 without special identification. Packaging and palletization must meet DLA-specific standards, including use of approved materials and containment codes. The end user is the Government of Israel, Ministry of Defense, Israeli Air Force, with delivery directed to Zrifin, Israel, and shipping coordinated through the Prototype Integration Facility in Huntsville, Alabama. The contract number is SPE4A6-26-T-14TG, with a required delivery date of July 27, 2026, and the solicitation closed on August 18, 2026. All technical and quality provisions are binding and sourced from authoritative DLA documents, with no exceptions allowed unless explicitly amended.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A1-26-T-2537
This contract specifies the procurement of 11 machine screws with NSN 5305-01-665-9100 and part number SS5302VA1-08 for Sikorsky Aircraft Corporation, governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards. The items must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129, with palletization adhering to DLA packaging guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at Level VII with an AQL of 0.1. Delivery is FOB origin with a strict 84-day timeline ending on August 7, 2026, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with shipment directed to DLA Distribution Cherry Point in North Carolina. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The unit of issue is each, priced at $11.00 per unit, totaling $121.00, under solicitation SPE4A1-26-T-2537 with a response deadline of August 18, 2026, and primary contact at DLA is Monneka Giles.
AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
SUPPORT, CROSSTUBE
Solicitation # SPEFA5-26-T-0985
This contract pertains to the procurement of two units of a critical application item, specifically a cross tube identified by part number 205-030-104-005 and NSN 1560-LL-NC0-1153, supplied by Bell Textron Inc. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which supersede other standards unless explicitly overridden. Compliance with MIL-STD-130N for identification marking of military property is required, and no shelf life restriction applies. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels and AQLs assigned as specified; unspecified attributes are treated as major. Acceptance criteria demand zero non-conformances unless otherwise stated, and manufacturers may choose between attribute or variable inspection methods. Packaging must conform to ASTM D3951 while strictly following DLA Packaging Requirements and MIL-STD-129 for marking and labeling, with palletization governed by RP001 standards. The contract specifies a firm fixed price for two units to be delivered FOB destination within 22 days, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the delivery point is the Fleet Readiness Center in Cherry Point, North Carolina. The item is classified as a critical application component and covered defense information applies. The solicitation was issued under SPEFA5-26-T-0985 with a response deadline of August 18, 2026, and an original required delivery date of September 15, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
AMS3216 .500 ID .62 WT
Solicitation # SPEFA3-26-T-0345
This contract specifies the procurement of a rubber tube meeting SAE AMS3216J standards with an internal diameter of 0.500 inches and a wall thickness of 0.062 inches, classified as Type 2 Class 1. The material requirement is governed by technical and quality standards from the DLA Master List of Technical and Quality Requirements, which supersede any conflicting general specifications. Physical identification and metal certification are mandatory, requiring CDRL-METALSCERT documentation to be submitted, with references to the DLA website for access to the latest revisions. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs based on criticality. The order calls for 24 linear feet of the specified tube to be delivered FOB destination within 84 days of contract award, with a quantity tolerance of plus or minus 10 percent. Packaging must comply with ASTM D3951 and MIL-STD-129, prioritizing DLA packaging requirements, and palletization must follow RP001 guidelines. The item is identified by NSN 9320-LN-003-5549 and associated purchase request 7017824762, with delivery directed to the Fleet Readiness Center Southeast in Jacksonville, Florida. No shelf life applies, and inspection and acceptance occur at the destination. The solicitation number is SPEFA3-26-T-0345, with a response deadline of August 18, 2026, and the contract is administered by the Defense Logistics Agency under the Department of Defense.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
PLATE, IDENTIFICATION
Solicitation # SPE8E6-26-T-4178
This contract is for the procurement of an identification plate with part number 764031 and NSN 9905-01-519-1119, requiring 98 units to be delivered within 66 days under solicitation SPE8E6-26-T-4178. The item is designated as a critical application item linked to Hamilton Sundstrand Corporation’s part number 1728724 and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with palletization following specified guidelines, and no unit identification is required per the service customer’s request. Delivery is FOB origin with zero tolerance for quantity variance, inspection and acceptance occur at destination, and the unit of issue is each. The contract mandates documentation for source approval and specifies the delivery address as DLA Distribution San Diego. The required delivery date is September 3, 2027, with no specified ship date, and all terms are governed by DLA procedural notes and federal acquisition regulations, including DFARS 252.211-7003(c)(1)(i).
SAN DIEGO

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
PANEL
Solicitation # SPEFA3-26-T-0344
The contract pertains to the procurement of one unit of PANEL with NSN 1560-LN-003-5519 and part number 74A731147-2013, issued by the Defense Logistics Agency under solicitation SPEFA3-26-T-0344. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The item has no shelf life requirement. Packaging must adhere to ASTM D3951 but is subject to precedence by DLA Master List requirements, with all packaging and labeling conforming to MIL-STD-129. Unit of issue and quantity per unit pack are as specified in the contract. Palletization must meet DLA Packaging Requirements, and delivery is FOB destination within five days of order with zero variance allowed. Inspection and acceptance occur at destination. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the Fleet Readiness Center Southeast in Jacksonville, Florida, with alternate freight and parcel post addresses provided. The required delivery date is August 12, 2026, and the contract includes government-use-only codes for tracking and logistics. The point of contact is James Green, reachable via the provided email and phone number.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
Government Medical Logistics Shipping and TransportationThe contract covers the secure and expedited transportation of insulin vials to an overseas military delivery point at FPO AE 09592, ensuring timely and traceable delivery under FOB destination terms. All shipments must utilize the fastest available traceable logistics methods, with end-to-end tracking maintained throughout the journey to guarantee accountability and situational awareness. Compliance with VSM standards is mandatory, confirming that all handling, storage, and transit protocols meet the stringent requirements for temperature-sensitive medical supplies. The work falls under NAICS code 488190, classifying it as other support activities for air transportation, and is structured as a subcontract under the Defense Logistics Agency's Government Medical Logistics Shipping and Transportation program. The delivery location serves U.S. military personnel stationed abroad, underscoring the critical nature of the medical cargo and the non-negotiable need for reliability and precision in execution.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
Logistics & International Delivery ServicesThe contract requires management of international logistics for shipping medical supplies from the United States to APO AE 09227-0000, ensuring end-to-end coordination including customs clearance, real-time tracking, and final delivery at the destination. The scope emphasizes secure and timely transport of critical medical materials to a U.S. military address, with strict compliance with international shipping regulations and defense logistics protocols. All phases of the shipment must be meticulously documented and monitored to guarantee accountability and uninterrupted supply chain operations. Issued under the NAICS code 488190 for other support activities for air transportation, this subcontract is managed by the Department of Defense through its Medical Supply Chain MD Surg FSF office. The opportunity was posted on August 9, 2026, with responses due by August 17, 2026, and is targeted at qualified subcontractors capable of handling sensitive military medical shipments through complex international transit networks. The place of performance is exclusively tied to the APO address, requiring contractors to have proven experience with military logistics, diplomatic shipping channels, and the ability to adapt to dynamic operational demands in deployed environments.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
GEAR, INTERNAL
Solicitation # SPE4A6-26-T-14PL
The contract specifies the procurement of an internal gear with NSN 3020-01-666-8079 and part number 06354-08011-101, quantity of five units, under solicitation SPE4A6-26-T-14PL. Delivery is required within 57 days, with a required delivery date of August 7, 2026, and must be shipped FOB origin to the destination at DLA Distribution Cherry Point in North Carolina. The item is classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, materials, and unit container codes, with marking following MIL-STD-129 and no special marking codes. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Acceptance occurs at the destination, with no variance allowed in quantity. Source approval documentation is required under RC001, and transportation logistics follow DLA procedural notes C19 and C20. The contract is issued under the DoD authorized unit of issue, with the purchase request number 7017804317 and total price of $5.00.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ROD ASSEMBLY
Solicitation # SPEFA5-26-T-0982
The contract pertains to the procurement of one rod assembly with part number 26000486 and NSN 2910-LL-NCA-6366, issued by the Defense Logistics Agency under solicitation SPEFA5-26-T-0982. The item is designated as a critical application component with no shelf life requirement and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization in accordance with DLA packaging requirements, and all units must be packed as one unit of issue per shipment. Delivery is due in five days FOB destination, with inspection and acceptance occurring at the destination point, and no quantity variance is permitted. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated freight address at Cherry Point, North Carolina. The required delivery date is August 10, 2026, and the contract includes specific government identifiers for processing and tracking.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CLEANING SOLVENT, GE
Solicitation # SPE8E5-26-T-3950
The contract is for the procurement of CLEANING SOLVENT, GE with NSN/Part Number 7930-01-367-0996,Quantity of 1 CO, under Purchase Request 7017805998, with delivery required within 20 days after award. The solicitation number is SPE8E5-26-T-3950, posted on August 9, 2026, with responses due by August 20, 2026, issued by the Defense Logistics Agency under the Department of Defense. The item is categorized under NAICS code 488190 and is subject to strict export control regulations under ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved access through the DLA questionnaire may handle the data. The contract also requires the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization. The primary point of contact is Devin Duffy, reachable via email and phone listed in the contract details.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 488190
New
DIBBS
BRACKET
Solicitation # SPEFA5-26-T-0983
This contract pertains to the procurement of a bracket component with part number 901-032-375-193 and NSN 1560-LL-NCB-9808, sourced from Bell Textron Inc and identified under cage code 97499. The item is designated as a critical application component with no shelf life requirement and must conform to drawing 901-032-375. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with control determined by the solicitation or award date depending on acquisition type. Identification of the item and its packaging must comply with MIL-STD-130N, and sampling procedures must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required unless otherwise specified. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract mandates packaging in accordance with ASTM D3951, but all DLA Master List requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must follow DLA packaging standards, with the unit of issue set at each (EA) and a total quantity of three units. Delivery is FOB destination, with an 83-day lead time from the original required delivery date of January 15, 2027. The item must be shipped to the designated freight address at Cherry Point, North Carolina, and delivered to the parcel post address for receipt. The solicitation number is SPEFA5-26-T-0983, issued by the Defense Logistics Agency Fleet Readiness Center, with Larry Kemp listed as the primary point of contact, and the contract falls under NAICS code 488190 for other transportation support activities.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335999
New
DIBBS
Supply of Electrical Insulation Sleeving (NSN: 5970014801456)
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Shipping via U.S.-Flag Vessels
Deep Sea Freight Transportation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Labeling
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation Services
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334418
New
DIBBS
Indicator Light (COTS Component) Supply
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
Precision Sleeve Bushing Supply
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541611
New
DIBBS
CMMC Level 2 Compliance Assessment (Third-Party)
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Labeling for DLA Shipment
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Hex Cap Screw (NSN: 5305011094534)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Domestic & International Shipping & Transportation Coordination
Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541620
New
DIBBS
Packaging & Labeling Compliance Services
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details