Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GEAR, INTERNAL

Active
SPE4A6-26-T-14PLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an internal gear with NSN 3020-01-666-8079 and part number 06354-08011-101, quantity of five units, under solicitation SPE4A6-26-T-14PL. Delivery is required within 57 days, with a required delivery date of August 7, 2026, and must be shipped FOB origin to the destination at DLA Distribution Cherry Point in North Carolina. The item is classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, materials, and unit container codes, with marking following MIL-STD-129 and no special marking codes. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Acceptance occurs at the destination, with no variance allowed in quantity. Source approval documentation is required under RC001, and transportation logistics follow DLA procedural notes C19 and C20. The contract is issued under the DoD authorized unit of issue, with the purchase request number 7017804317 and total price of $5.00.

General Info

Five internal gears, NSN 3020-01-666-8079, due August 7, 2026, FOB origin, DLA Cherry Point, strict quality and packaging rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14PL DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ZACHARY GONZALEZ
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEAR,INTERNAL
GEAR,INTERNAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 06354-08011-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017804317 0001 EA 5.000
NSN/MATERIAL:3020016668079
DELIVERY (IN DAYS):0057
SPE4A6-26-T-14PL
SECTION B
PR: 7017804317 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/07/2026
SPE4A6-26-T-14PL NSN/Part Number: 3020-01-666-8079 Quantity: 5 EA Purchase Request: 7017804317QTY: 5 Delivery: 57 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
ROD ASSEMBLY
Solicitation # SPEFA5-26-T-0982
The contract pertains to the procurement of one rod assembly with part number 26000486 and NSN 2910-LL-NCA-6366, issued by the Defense Logistics Agency under solicitation SPEFA5-26-T-0982. The item is designated as a critical application component with no shelf life requirement and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization in accordance with DLA packaging requirements, and all units must be packed as one unit of issue per shipment. Delivery is due in five days FOB destination, with inspection and acceptance occurring at the destination point, and no quantity variance is permitted. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated freight address at Cherry Point, North Carolina. The required delivery date is August 10, 2026, and the contract includes specific government identifiers for processing and tracking.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CLEANING SOLVENT, GE
Solicitation # SPE8E5-26-T-3950
The contract is for the procurement of CLEANING SOLVENT, GE with NSN/Part Number 7930-01-367-0996,Quantity of 1 CO, under Purchase Request 7017805998, with delivery required within 20 days after award. The solicitation number is SPE8E5-26-T-3950, posted on August 9, 2026, with responses due by August 20, 2026, issued by the Defense Logistics Agency under the Department of Defense. The item is categorized under NAICS code 488190 and is subject to strict export control regulations under ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved access through the DLA questionnaire may handle the data. The contract also requires the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization. The primary point of contact is Devin Duffy, reachable via email and phone listed in the contract details.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
BRACKET
Solicitation # SPEFA5-26-T-0983
This contract pertains to the procurement of a bracket component with part number 901-032-375-193 and NSN 1560-LL-NCB-9808, sourced from Bell Textron Inc and identified under cage code 97499. The item is designated as a critical application component with no shelf life requirement and must conform to drawing 901-032-375. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with control determined by the solicitation or award date depending on acquisition type. Identification of the item and its packaging must comply with MIL-STD-130N, and sampling procedures must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required unless otherwise specified. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract mandates packaging in accordance with ASTM D3951, but all DLA Master List requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must follow DLA packaging standards, with the unit of issue set at each (EA) and a total quantity of three units. Delivery is FOB destination, with an 83-day lead time from the original required delivery date of January 15, 2027. The item must be shipped to the designated freight address at Cherry Point, North Carolina, and delivered to the parcel post address for receipt. The solicitation number is SPEFA5-26-T-0983, issued by the Defense Logistics Agency Fleet Readiness Center, with Larry Kemp listed as the primary point of contact, and the contract falls under NAICS code 488190 for other transportation support activities.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
WEIGHT, COUNTERBALAN
Solicitation # SPE4A1-26-T-2533
This contract pertains to the procurement of two counterbalance weight units identified by NSN 3040-01-714-2396 and part number 06130-11206-101, issued under solicitation SPE4A1-26-T-2533 by the Department of Defense’s Aviation Supply Chain. The items must be delivered within 84 days to DLA Distribution Cherry Point in North Carolina, with delivery terms FOB origin and inspection and acceptance occurring at the destination. No quantity variance is permitted, and packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging standards, including packaging code U, preservation method 10, and container type E5. Marking must comply with MIL-STD-129, with no special marking required. The contract mandates zero-defect acceptance under a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. Documentation for source approval must meet RC001 standards, and covered defense information protocols apply under RD002. The total contract value is $2.00 per unit for two units. The original required delivery date is August 7, 2026, and all transportation logistics follow DLA procedural notes C19 and C20.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
TAPE, PRESSURE SENSITIV
Solicitation # SPE8EN-26-T-2866
This contract pertains to the procurement of pressure-sensitive adhesive tape with specific technical, packaging, and quality requirements governed by the DLA Master List of Technical and Quality Requirements, identified by R and I numbers. The item is classified as a TYPE I (CODE M) with a strict 24-month non-extendable shelf life, and vendors must label and date the material appropriately prior to delivery. The tape must be free from intentional addition of mercury or mercury-containing compounds, except in specific exemptions such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life items, and palletization must adhere to DLA packaging standards. Hazardous material shipping protocols under IP025 and proper unit of issue designation apply, with delivery required FOB destination within 20 days. The contract specifies a quantity of 12 RO (roll units) under purchase request 7017784101, with the NSN 7510-01-358-8770, and the item must be delivered to the designated military destination in Yokosuka, Japan. The delivery deadline is August 5, 2026, and the solicitation number is SPE8EN-26-T-2866. The vendor is responsible for ensuring all documentation, marking, and packaging align with DLA requirements, including proper labeling and adherence to packaging, marking, and shipping protocols. The contract designates the DoD authorized unit of issue and references official sources for unit conversion, with inspection and acceptance occurring at the destination. Vendor compliance with technical specifications, mercury restrictions, shelf-life controls, and packaging standards is mandatory, and failure to meet these conditions will result in non-acceptance of the supplies.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
LOCKNUT, OIL COOLER
Solicitation # SPE4A6-26-T-14MG
The contract specifies the procurement of two locknuts for an oil cooler, identified by NSN 1680-01-670-2483 and part number 06362-08049-101, with a total quantity of two units at a unit price of $2.00. Delivery is required within 84 days of contract award, with shipment FOB origin and no variance allowed in quantity. All items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements, while adhering to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Inspection and acceptance occur at the destination, and sampling must comply with MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances unless otherwise stated, with attributes prioritized as critical, major, or minor per defined verification levels or AQLs. Packaging and marking must include proper government identification removal for non-accepted supplies and bare item marking as required. Delivery is to DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes. The contract was issued under solicitation SPE4A6-26-T-14MG with a response deadline of August 17, 2026, and the original required delivery date is June 3, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CONNECTOR
Solicitation # SPEFA3-26-T-0343
This contract is for the procurement of 10 units of Connector, identified by NSN 5935-LN-003-5697 and part number 8011-00002, under solicitation SPEFA3-26-T-0343. Delivery is required within five days of award, with FOB destination terms, and no variance in quantity is permitted. Inspection and acceptance occur at the destination facility, the Fleet Readiness Center Southeast in Jacksonville, Florida. The item is not subject to shelf life requirements, and unique item identification is not mandated per customer request. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking, with palletization following DLA’s RP001 packaging standards, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting specifications. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. All shipments must use traceable freight methods and not parcel post. The unit of issue is each, priced at $10 per unit, totaling $100. The required delivery date is July 21, 2026, and the contract references specific DLA technical, quality, and packaging directives applicable to the acquisition.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
International Freight and Delivery LogisticsThe contract mandates the arrangement and execution of an international shipment for a mounting bracket from the United States to Camp Carroll in South Korea, with delivery required no later than August 14, 2026. Transportation must be performed under FOB destination terms, meaning the seller bears all costs and risks until the goods arrive at the final destination. Compliance with DPAS regulations is mandatory to ensure priority handling consistent with national defense requirements. The provider is responsible for securing all necessary customs clearances and documentation to facilitate smooth transit across international borders without delays. The performance is classified under NAICS code 488190, indicating it involves other support activities for air transportation, and is officially categorized as a subcontract issued by the Defense Logistics Agency under the Department of Defense. The shipment must be managed with precision to meet the strict deadline, accounting for all logistical, regulatory, and operational challenges inherent in cross-border defense-related cargo movement.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 488190
New
Federal
Government-Furnished Material (GFM) / Export & Shipping ComplianceThe contract requires coordination of FOB contractor deliveries to an overseas military location, specifically addressing compliance with export control regulations, MIL-STD-129 packaging standards, and WAWF documentation procedures. The work involves ensuring all shipments to the APO 09461 destination meet federal and defense-specific logistical requirements, with strict adherence to international shipping protocols and defense export laws. The contractor must manage the end-to-end supply chain process from final preparation to secure delivery, maintaining full traceability and regulatory compliance throughout. This subcontract, posted under NAICS code 488190, is issued by the Department of Defense under office FA5587 48 Cons and carries a response deadline of August 20, 2026. All activities must align with U.S. government standards for military logistics, including proper labeling, documentation, and customs clearance for overseas military posts. The successful bidder will be responsible for integrating with existing defense logistics systems, ensuring timely and accurate submission of export records, and confirming that all packaging and shipping practices conform to military specifications without deviation.
FA5587 48 Cons (admin Only No Req)

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
Federal
Repair of Panel Control, Elec and Multichannel
Solicitation # 70Z03826QH0000077
This solicitation, numbered 70Z03826QH0000077, is a combined synopsis and request for quotation under FAR Subpart 12.201 for the repair or evaluation of a PANEL, CONTROL, ELECT with NSN 6110-01-433-4990 and part number 712940-1, classified under NAICS code 488190. The requirement is unrestricted with a small business size standard of $40,000,000, and no set-aside is in effect. The U.S. Coast Guard anticipates awarding a firm-fixed price purchase order on a sole-source basis to G.E. AVIATION (CAGE: 19623) based on fair and reasonable pricing and an affirmative responsibility determination. The solicitation, issued as an RFQ, has undergone multiple extensions, with the final closing date set for August 7, 2026, at 12:00 PM EDT. Quotes must be submitted via email to designated addresses, with the RFQ number included in the subject line. The contract requires full technical data access, proof of ability to update technical documentation using a TODO account or signed DD-2345, and airworthiness certification for all overhauled items, which may be demonstrated via FAA 8130 certification or equivalent. The scope includes repair, determination of beyond economic repair status, or no fault found findings, with each交付 item requiring a certificate of conformance per FAR 52.246-15, complete with NSN, part number, serial number, and purchase order number. Packaging must comply with ASTM D3951-15 and best commercial practices, excluding popcorn, shredded paper, Styrofoam, or peanut packaging; items must be individually packaged and labeled with shipping documentation on both the exterior and interior of the container. Delivery is to the USCG Aviation Logistics Center in Elizabeth City, NC, under F.O.B. Destination terms with receiving hours from 6:00 AM to 3:30 PM. The government may exercise an option under FAR 52.217-6 to increase the quantity by two additional units, for a maximum of three total, at the original unit price within 365 days after award. All contractor records must be maintained per FAR 4.7,
Aviation Logistics Center (ALC)(00038)

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
SLED
International Shipping and Tariff Management
Texas A&M University

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 488190
New
Federal
Biotech Logistics and Cold Chain DistributionThe contract calls for specialized logistics services focused on the packaging, labeling, and shipment of temperature-sensitive biologic reagents requiring stringent cold chain protocols, including maintenance at -80°C throughout运输. The work involves rigorous compliance with controlled environmental standards to preserve sample integrity, ensuring that all handling, documentation, and transport adhere to industry-specific biologic shipment requirements. This subcontract is issued under the NAICS code 488190, which covers other support activities for air transportation, indicating a need for highly coordinated, specialized distribution beyond standard freight services. The National Institutes of Health, specifically NIDA under the Department of Health and Human Services, is the agency overseeing this procurement with a response deadline of August 13, 2026. While the exact place of performance is not specified, the nature of the work implies coordination across multiple facilities and potentially international points of delivery. Bidders must demonstrate proven experience in cold chain management for biologics, including validated packaging solutions, real-time temperature monitoring, contingency protocols for deviations, and compliance with regulatory expectations for biological material transport. All proposals must be submitted by the stated deadline to be considered for award.
National Institutes Of Health Nida

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details