Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-26-T-14KHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.

General Info

1,261 quick release pins ordered for Hill AFB, Utah, with DLA quality, export control, and delivery within 103 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14KH DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ahoefa Simons De Fanti
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
INCLUDE ZD080 OBJECT TEXT ID ST
IDENTIFY TO:
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-00-904-1662 Quantity: 1,261 EA Purchase Request: 7017011142QTY: 1261 Delivery: 103 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-943F
The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9350
The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14LH
The contract pertains to the procurement of 395 straight headless pins identified by NSN 5315-01-269-9299 under solicitation SPE4A6-26-T-14LH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 155 days after award, and responses must be submitted by August 17, 2026. The item falls under NAICS code 332510 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and packaging must adhere to DLA standards. Inspection and acceptance occur at the origin, and non-accepted supplies must have all government identification removed. Physical marking of the bare items is required, and export control regulations under ITAR or EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract enforces tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with additional provisions for the safeguarding of covered defense information. Technical data governing the item cannot be disclosed to foreign persons, including employees of U.S. companies or subsidiaries, without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to controlled data is limited to contractors who have successfully completed the DLA Export-Controlled Technical Data Questionnaire and training via the designated DLA website. The place of performance is Tinker Air Force Base, Oklahoma, with Summer Allen as the primary point of contact for inquiries. The procurement is classified as federal and does not specify a set-aside type, and all documentation must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14LK
The contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-513-6085, with a total quantity of 24 units requiring delivery within 97 days FOB origin, with no tolerance for variance in quantity. All items must be packaged in accordance with ASTM D3951 and marked and labeled per MIL-STD-129, with palletization aligned to DLA’s packaging requirements, and all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs. The item is designated as a Critical Application Item, and sourcing may involve casting or forging processes requiring specialized tooling not held by the government; any such requirements must be addressed via a Casting and Forging Assistance Request to the designated DLA channels. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with the required ship date set for November 23, 2026, and inspection and acceptance occurring at the destination. The solicitation number is SPE4A6-26-T-14LK, issued under a federal acquisition, with primary contact information provided for Ericka Mosley at DLA, and the NAICS code falls under 332722 for forgings and stampings.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details