Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Biotech Logistics and Cold Chain Distribution

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for specialized logistics services focused on the packaging, labeling, and shipment of temperature-sensitive biologic reagents requiring stringent cold chain protocols, including maintenance at -80°C throughout运输. The work involves rigorous compliance with controlled environmental standards to preserve sample integrity, ensuring that all handling, documentation, and transport adhere to industry-specific biologic shipment requirements. This subcontract is issued under the NAICS code 488190, which covers other support activities for air transportation, indicating a need for highly coordinated, specialized distribution beyond standard freight services. The National Institutes of Health, specifically NIDA under the Department of Health and Human Services, is the agency overseeing this procurement with a response deadline of August 13, 2026. While the exact place of performance is not specified, the nature of the work implies coordination across multiple facilities and potentially international points of delivery. Bidders must demonstrate proven experience in cold chain management for biologics, including validated packaging solutions, real-time temperature monitoring, contingency protocols for deviations, and compliance with regulatory expectations for biological material transport. All proposals must be submitted by the stated deadline to be considered for award.

General Info

Specialized cold chain logistics for -80°C biologics with strict compliance, deadline August 13, 2026, under NIDA/NIH.

Agency

Department Of Health And Human Services → National Institutes Of Health NidaView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

MD

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Health And Human Services → National Institutes Of Health Nida
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Health And Human Services → National Institutes Of Health Nida
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Specialized packaging, labeling, and shipping of temperature-sensitive biologic reagents requiring strict cold chain controls (e.g., -80°C).

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
Federal
S201--Building Drone Cleaning
Solicitation # 36C26226Q1150
The U.S. Department of Veterans Affairs, through the VA Loma Linda Health Care System, is conducting a sources sought announcement to identify qualified small businesses capable of providing drone-based exterior building cleaning services at the Loma Linda Medical Center in California. This announcement is purely for market research and does not constitute a solicitation, request for proposals, or any obligation to award a contract. The government is seeking information from Service-Disabled Veteran Owned Small Businesses, Veteran-Owned Small Businesses, 8(a), HubZone, Women-Owned, and other small businesses with demonstrated expertise in utilizing tethered drone systems for soft wash cleaning of building facades, windows, masonry, and hard surfaces up to 175 feet in height. Respondents must provide detailed documentation including company information, Unique Entity ID, CAGE code, tax ID, small business certification status, and a capability statement not exceeding five pages that directly addresses technical qualifications, regulatory compliance, and operational capability. To be considered capable, firms must hold an active FAA Part 107 Remote Pilot Certification and, if operating drones exceeding 55 pounds, must possess an FAA Section 44807 Heavy Drone Exemption. All equipment must be NDAA-compliant with verified manufacturer and origin details, and vendors must carry UAS aviation liability insurance of at least $2 million. Vendors must also hold an OSHA 30-hour certificate and a D38 Sand and Water Blasting license, and must be registered in SAM.gov. Responses must include past performance examples with contract value, building height, and points of contact from similar projects completed within the last three years. Strict limitations on subcontracting apply: the prime contractor must perform at least 50% of the contract cost with its own personnel or similarly situated certified SDVOSB/VOSB entities, and no pass-through arrangements are permitted. Failure to submit a signed VAAR 852.219-75 Certificate of Compliance will render a response ineligible. The government will not reimburse any costs incurred in responding, and submissions must be received by July 20, 2026, at 4:00 p.m. EST, addressed to Stephanie Naron, Contract Specialist. All responses will inform future acquisition planning under the Veterans First Contracting Program, which prioritizes awards to verified SDVOSBs when the Rule of Two is met.
262-NETWORK Contract Office 22 (36C262)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
Federal
Aircrew Flight Equipment Service FY27 - (Columbus Air Force Base, Columbus MS)
Solicitation # FA302226Q0305
This solicitation, identified as FA302226Q0305, is a Request for Quotation for Aircrew Flight Equipment Services at Columbus Air Force Base in Columbus, Mississippi, structured as a Firm Fixed Price contract with a base year and four optional one-year periods spanning from October 1, 2026, to September 30, 2031. The requirement is a 100% Small Business Set-Aside under NAICS code 488190, with a small business size standard of $40.0 million, and is issued under Subpart 12.2 as a combined synopsis/solicitation with no paper copies available. Funds are not yet available, and no award will be made until appropriated funds are secured; the government reserves the right to cancel the solicitation at any time without liability for offeror costs. Offerors must submit a Quote and Technical Narrative via email to the Contract Specialist and Contract Officer by 2:30 PM CDT on August 7, 2026, including the solicitation number in the email subject line and obtaining a confirmed receipt notice. All responses must comply with SAM registration requirements, including an active UEI and the correct NAICS code on the SAM profile, and must include responses to required representations and certifications such as those addressing payments to influence federal transactions, former DoD official compensation, and covered defense telecommunications. The scope of work includes in-shop maintenance, repair, and modification of parachutes, flotation devices, anti-G garments, flight suits, vision restriction devices, and sewing machines, in accordance with AFMAN 11-301 and other mandatory technical orders. Personnel must be qualified graduates of relevant military or FAA rigger training programs, and a Contract Manager must be available Monday through Friday, 0700–1600, excluding holidays. The contractor is required to maintain a two-person inspection team for parachutes, appoint a security representative, comply with installation access rules, and ensure no DoD employees are employed in a manner that conflicts with Air Force interests. Labor standards are governed by Wage Determination 2015-5157, Rev 29, under the Service Contract Act, with additional clauses addressing paid sick leave, employment eligibility verification, trafficking in persons, privacy training, sustainable products, and accelerated payments to small business subcontractors. Payment is processed through WAWF within the PIEE system, requiring electronic invoicing and timely acceptance
FA3022 14 Cons Lgca

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
Federal
Aircraft Wash and Lubrication Operations
Solicitation # FA664826Q0008
The contract requires the provision of aircraft wash and lubrication services for F-16 aircraft at Homestead Air Reserve Base in Florida, with performance beginning on 1 September 2026 under a firm fixed price structure. The scope includes up to four weekly aircraft washes, annual cleaning of static display aircraft, comprehensive documentation in IMDS and AFTO Form 781, strict adherence to technical orders such as T.O. 1-1-691 and 1F-16C-23, compliance with corrosion control and FOD prevention protocols, and environmental safeguards including oil-water separation and adherence to Miami-Dade Chapter 24 regulations. All work must be performed by personnel with at least one year of documented experience in DOD or commercial aircraft cleaning, and contractor employees must obtain base access badges, undergo background investigations, and comply with stringent security and CUI handling protocols, including the use of ECA PKI certificates for encrypted communications and mandatory CUI training. The contract is structured with a 12-month base period and four additional 12-month option periods, totaling a potential five-year performance period subject to government discretion. This procurement is a 100% total small business set-aside with a size standard of $40 million, and evaluation will be conducted under a best-value trade-off process where technical capability and past performance are critical pass/fail thresholds that supersede price considerations. Offerors must submit proposals in three volumes — Technical Acceptability (limited to 15 pages), Past Performance (three references), and Administrative & Price — via email to the Contracting Officer or through the DoDSAFE portal for files exceeding 20MB. Pricing is not preset and will be negotiated, with all CLINs marked “To Be Negotiated.” Contractors must invoice electronically via WAWF and submit weekly and semi-annual performance reports with negative reporting requirements. Additional requirements include compliance with DFARS clauses for subcontracting limitations (not exceeding 50% to non-similarly situated entities), prohibition of ozone-depleting substances, use of approved materials and equipment only, and strict limitations on interactions with government personnel beyond the COR. All offerors must be registered in SAM.gov, possess a UEI and CAGE code, and affirm representations and certifications through SAM.gov, including cybersecurity and whistleblower protections.
FA6648 482 Lss Lgc

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
Federal
OCONUS Aircraft Wash and Lubrication Services
Solicitation # FA8105080426
The Air Force Life Cycle Management Center’s Legacy Tanker Division is seeking qualified contractors to provide secure, environmentally compliant, turnkey aircraft wash and post-wash lubrication services for Department of War mobility, tanker, and cargo aircraft including KC-135 and KC-46 airframes operating in CENTCOM, AFRICOM, and EUCOM regions. Initial efforts are focused on establishing capability at Contractor-Provided, Contractor-Operated facilities within a 1,000-nautical-mile radius of Muwaffaq Salti Air Base in Jordan, requiring scalable washing operations including full exterior, clear-water rinse, and localized wash, along with rapid induction, full personnel and equipment provisioning, MIL-SPEC solvent use, strict physical and operational security, and adherence to host-nation environmental standards. The solicitation, identified as FA8105080426 under NAICS code 488190, is open to all eligible vendors with no set-aside applied. Interested parties must submit a capabilities statement, valid CAGE code, and active JCP certification to access the Controlled Technical Information contained in the full Performance Work Statement. The response deadline was extended from August 7 to August 14, 2026, with submissions due by 11:00 a.m. Central Time on the latter date. All materials should be directed to the designated point of contact, Jaqueline Hughes, with secondary support from Trae Warcup, at the Tinker AFB, Oklahoma office.
FA8105 Aflcmc Wkk

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA3-26-T-0338
The contract pertains to the procurement of three units of an ANGLE component identified by NSN 1560-LN-003-4876 and SIKORSKY P/N 70201-22109-120, to be delivered FOB destination to Jacksonville, Florida, with a required delivery date of August 5, 2026, and a performance window of 84 days after order placement. The total contract value is $9.00, with a strict zero variance tolerance on quantity and acceptance occurring at the destination upon inspection. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all items must be marked and labeled per MIL-STD-129 with palletization conforming to RP001. Unit of Issue is EA, and Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), though barcoding must still adhere to MIL-STD-129. Sampling is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor respectively, with unspecified attributes deemed major. Hazardous materials must be labeled per 29 CFR 1910.1200 with prior submission of Safety Data Sheets mandatory for award consideration, and any changes to material composition must be immediately reported. The contractor must comply with NIST SP 800-171 cybersecurity requirements, report potential safety issues, and ensure transportation adheres to DoD regulations including waiver requirements for use of foreign-flag vessels. Invoicing must be submitted exclusively through WAWF, and the government retains unlimited rights to all submitted Safety Data Sheet data. The solicitation incorporates multiple FAR and DFARS clauses including Equal Opportunity for Workers with Disabilities, Combating Trafficking in Persons, Employment Eligibility Verification, Sustainable Products, and Safeguarding Covered Defense Information, all with deviation modifications. The contractor must provide a Unique Entity Identifier and CAGE code, and represent its size status and socioeconomic certifications, though no specific certifications are declared in the solicitation. Proposals must be submitted electronically via DIBBS by August 13, 2026, with no amendments
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
WASHER, AIRCRAFT, MAT
Solicitation # SPE4A6-26-T-09ZZ
The contract requires the delivery of 84 aircraft mat washers identified by NSN 5310015622686 under solicitation SPE4A6-26-T-09ZZ, with a 98-day delivery window and FOB origin terms, meaning title and risk transfer to the government upon shipment from the contractor’s facility. The product must conform to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-2073-1E using packaging code U, with unit containers as boxes and intermediate containers as envelopes, while marking must comply with MIL-STD-129, including barcoding and no special marking codes. The contractor is prohibited from using mercury or mercury-containing compounds in preservation, packaging, packing, or marking unless functional use in batteries, instruments, sensors, controls, weapon systems, or fluorescent lamps is involved, in which case items must be shock-proof and contain a secondary containment boundary per NAVSEA 5100-003D. All hazardous materials must be labeled and documented according to 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required to be submitted prior to award. The contract mandates use of U.S.-flag vessels for sea transportation unless a formal waiver is granted 45 days in advance, and this requirement flows down to subcontracts above the simplified acquisition threshold. Inspections and acceptance occur at the destination, managed by the government under FAR 52.246-2, and all payment requests must be submitted through Wide Area WorkFlow (WAWF). The solicitation incorporates multiple Federal Acquisition Regulation clauses including cybersecurity safeguards, whistleblower protections, mercury restrictions, hexavalent chromium prohibitions, export controls, and subcontracting obligations, with deviations applied to certain clauses for updated compliance standards. The contract does not specify unit pricing nor total value, and award is not explicitly based on a Lowest Price Technically Acceptable or best value trade-off evaluation. Offers must be submitted via
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-0976
The contract pertains to the procurement of a Flex Duct Assembly, identified by part number 126657-914 and NSN 2835-LL-NC0-4571, with a quantity of 25 units to be delivered FOB destination within 132 days from the order placement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by contract specifications. Verification and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be packaged in accordance with ASTM D3951 but must fully comply with the more stringent DLA packaging requirements, including MIL-STD-129 labeling and RP001 palletization standards. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and the product has no shelf life restriction. The contract is issued under solicitation SPEFA5-26-T-0976 as a Total Small Business Set-Aside under NAICS code 488190, with a fixed unit price of $25 per unit and a total contract value of $625. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The original required delivery date is August 4, 2026, and all packaging and marking must reflect the specified unit of issue and quantity per unit pack as outlined in the purchase order.
DLA FLEET READINESS CENTER DLA PSC

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Health And Human Services → National Institutes Of Health Nida

Same awarding agency

NAICS: 325412
New
Federal
Government Contracting Compliance & GSA Schedule SupportThe contract solicits the supply of biotechnology reagents through existing GSA Schedule or GWAC vehicles, requiring full compliance with the Federal Acquisition Regulation for pricing and delivery terms. All offerings must leverage pre-negotiated, FAR-compliant contractual mechanisms to ensure transparency, affordability, and efficiency in procurement by the National Institutes of Health, specifically the National Institute on Drug Abuse under the Department of Health and Human Services. The NAICS code 325412 confirms the primary focus on pharmaceutical and biological product manufacturing, indicating the need for high-purity, research-grade reagents suitable for scientific and clinical applications. Responses must be submitted by August 13, 2026, and the contract is structured as a subcontract, implying the awardee will fulfill obligations under a prime contract holder rather than directly with the government. Performance is expected to align with federal supply chain standards, though no specific place of performance or set-aside criteria are provided. Compliance with GSA Schedule or GWAC terms is mandatory, ensuring that pricing remains consistent with established federal rates and that delivery timelines meet agency operational needs. The solicitation underscores the importance of proven regulatory adherence and reliable supply chain execution to support critical biomedical research activities.
Pharmaceutical Preparation Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325412
New
Federal
Specialty Biotech Reagent Manufacturing (dCODE Dextramer®)The contract involves the manufacture of specialized immunology reagents based on dextramer technology, specifically customizable HLA-peptide complexes equipped with fluorescent barcoding, intended for use in research and clinical applications. These reagents are designed to enable precise detection and analysis of antigen-specific T cells, supporting advancements in immunological studies and potential therapeutic development. The production must meet stringent quality and consistency standards to ensure reliability across diverse experimental and diagnostic settings, with an emphasis on scalability and customization to accommodate varying peptide and HLA combinations. This is a subcontract under the National Institutes of Health, specifically the National Institute on Drug Abuse, part of the Department of Health and Human Services, with the NAICS code 325412 indicating biological product manufacturing. The opportunity was posted on August 6, 2026, and responses are due by August 13, 2026, with no set-aside classification specified. The place of performance and other location details are not provided, indicating flexibility in where the manufacturing may occur, though all work must comply with the technical and regulatory requirements for clinical-grade reagents. The focus is squarely on advanced biotech manufacturing capabilities, emphasizing precision, reproducibility, and compliance with industry best practices for immune monitoring tools.
Pharmaceutical Preparation Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325414
New
Federal
Custom Peptide Synthesis and Conjugation ServicesThe contract involves the synthesis of custom peptides and their conjugation to dextramer platforms labeled with fluorescent tags such as phycoerythrin (PE), specifically for use in immune monitoring applications. The work requires precise chemical synthesis of peptides tailored to specific immunological targets, followed by their stable attachment to dextramer scaffolds to enable high-sensitivity detection of antigen-specific T cells. Barcode labeling is a critical component, allowing multiplexed tracking and identification of multiple peptide-MHC complexes within a single sample, which enhances the efficiency and throughput of immune response analysis. The project is intended to support advanced research tools used in immunology and vaccine development, particularly in the context of infectious disease and cancer immunotherapy studies. This subcontract is issued under the National Institutes of Health NIDA, part of the Department of Health and Human Services, and falls under NAICS code 325414 for pharmaceutical preparation manufacturing. The opportunity was posted on August 6, 2026, with a response deadline of August 13, 2026. There is no set-aside designation specified, and no physical place of performance or point of contact details are provided. The work is expected to be performed by a qualified vendor capable of meeting high-purity standards and regulatory compliance for research-grade reagents, with deliverables including fully characterized peptide-dextramer-fluorophore conjugates ready for downstream immune cell assays.
Biological Product (except Diagnostic) Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Repair and Installation services for the Heat Exchanger System on a Bruker 9.4 Tesla Magnetic Resonance Imaging (MRI) system
Solicitation # 75N98026Q00967
The National Institutes of Health, National Institute on Drug Abuse’s Intramural Research Program is conducting market research to identify qualified sources capable of providing emergency repair parts and installation services for the Triple-loop Heat Exchanger System on its Bruker 9.4 Tesla Magnetic Resonance Imaging scanner, which has failed and requires immediate replacement to prevent catastrophic magnet quenching. The requirement specifies a brand-name or equal heat exchanger that must interface seamlessly with the existing scanner software, building water supply, magnet cryomech, gradient, and shim coil cooling systems while ensuring stable cryomech operation and maintaining magnet pressure at 1040 mbar. All components must be new, unused, original equipment manufacturer parts authorized by Bruker Corporation, and installation must be performed exclusively by Bruker-certified technicians to preserve the MRI system’s existing warranty. The contractor must deliver and install the system within three months of order receipt, with a one-year warranty covering all parts, labor, travel, and including one preventative maintenance visit. Responses to this sources-sought notice must be submitted electronically by August 12, 2026, and must include detailed capability statements addressing each technical requirement separately, with supporting documentation on company size status under NAICS Code 334516, employee count, personnel qualifications, relevant government contracts, and complete contact and SAM.gov registration information including UEI and TIN. The notice explicitly states that no award will result from this action and that responses are not proposals or quotations. Companies must identify the place of manufacturing and confirm compliance with the Non-Manufacturer Rule if applicable. Proprietary or sensitive data should not be included, though any claimed proprietary information will be safeguarded. Responses are limited to ten pages excluding cover page and references, must reference solicitation number 75N98026Q00967SB, and be sent exclusively to Josh Lazarus at josh.lazarus@nih.gov. All respondents must have an active SAM.gov registration, and while small businesses are strongly encouraged to respond, the government retains full discretion on whether to pursue a competitive or non-competitive acquisition path based on the feedback received.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details