This Presolicitation opportunity from Department Of Health And Human Services was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Repair and Installation services for the Heat Exchanger System on a Bruker 9.4 Tesla Magnetic Resonance Imaging (MRI) system

Awarded

75N98026Q00967Federal

Submission Closed09/02/2026, 11:00:00 AM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

Analytical Laboratory Instrument SupplyThis subcontract agreement concerns the supply of high-precision analytical laboratory instruments for prime contractors operating on projects at the University of British Columbia Okanagan Campus. The scope of work includes the provision of specialized equipment such as centrifuges, chromatographs, and spectrometers, with a specific requirement that all instruments be delivered commissioned to the XSS Building research space. The contractor is responsible for ensuring that all supplied equipment adheres to strict scientific calibration standards and is covered by manufacturer warranties. This procurement opportunity, categorized under NAICS code 334516, was posted on November 13, 2026, with a response deadline set for December 8, 2026.

University of British Columbia

POSTED

DEADLINE

Solicitation # 2026010350

The University of British Columbia is soliciting proposals under solicitation number 2026010350 for the provision of scientific equipment to support the XSS Building at the UBC Okanagan Campus. This equipment is intended to facilitate a new collaborative research space scheduled to open in 2027. The project is located in British Columbia, Canada, and is managed by the Province of British Columbia. Interested parties must submit their proposals by the deadline of December 8, 2026, at 2:00 PM PCT. Procurement documents and submission processes are handled through the UBC Bonfire portal. While specific pricing, delivery schedules, and evaluation factors are not detailed in the initial notice, the primary objective is the successful delivery of scientific equipment to the Okanagan Campus to meet the 2027 operational timeline.

University of British Columbia

POSTED

DEADLINE

Fluorescence and Reflected-Light Imaging Microscope UpgradeThis subcontract involves the supply and installation of a Fluorescence and Reflected-Light Imaging Microscope Upgrade for prime contractors working on projects at Oak Ridge National Laboratory. The scope of work includes providing all hardware and components specified in the Bill of Materials, performing the physical installation, and conducting functional operability testing to ensure the system is fully operational. The final deliverables consist of the upgraded microscope and a signed test report verifying its performance. To ensure quality and security, the project requires the use of factory-trained service engineers for all technical work. All on-site personnel must comply with FAR 52.204-9 regulations, and any IT components integrated into the system must adhere to NIST common security configurations. The work is performed in Oak Ridge, Tennessee, under the oversight of the Department of Energy and ORNL UT-Battelle LLC.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Industrial CT Scanner Equipment SupplierThis subcontract opportunity, issued by the Department of Defense through the DCSO Columbus Division 2, seeks a supplier to provide a brand-new, non-refurbished Industrial Computed Tomography (CT) Scanner System. The equipment is intended for prime contractors supporting DLA supply contracts and must be a commercial off-the-shelf or modified system capable of running on standard 110V, 20A office power. The supplier is responsible for the physical delivery of the system to the performance site in Columbus. Strict technical and security requirements apply to the hardware and software. The system must be air-gapped or compatible with government-secure cloud environments and must adhere to NIST SP 800-171 or CMMC standards. This procurement is designated as a total Small Business Set Aside under NAICS code 334516, with a response deadline of November 30, 2026.

DCSO-COLUMBUS-DIVISION-2

POSTED

DEADLINE

RFQ: Smart-ABI+ wireless system

Solicitation # 75N95D27Q00002

The National Institutes of Health Office of Logistics and Acquisition Operations is soliciting a firm-fixed price purchase order for one Smart-ABI+ wireless system to support the National Institute on Aging Clinical Research Unit. This equipment is intended to replace obsolete ankle-brachial index testing tools to ensure standardization for peripheral arterial disease clinical research studies. The comprehensive system includes a Smart-LEDA+ software license, a portable computer with a Microsoft operating system, wireless pressure cuffs for ankles and arms, a system console with a charging station, a pulse oximeter, and various accessories such as power cords, disposable electrodes, and educational materials. A one-year partnership program including a product warranty is also required. The contract will be awarded to the responsible offeror providing the best value based on price, technical capability, past performance, and delivery schedule, with additional considerations for lifecycle cost and maintenance availability. Delivery is to be made to the National Institute on Aging at MedStar Harbor Hospital in Baltimore, Maryland. Interested offerors must be registered in the System for Award Management and submit their proposals via the SAM.gov portal by November 23, 2026. Required submission documents include unit and total pricing, delivery terms, business size certification, and completed FAR 52.212-3 representations and certifications.

National Institutes Of Health Olao

POSTED

DEADLINE

Request for Information - DNA Buccal Collection Kits

Solicitation # 20270753FDDU

The Federal Bureau of Investigation is issuing a Sources Sought Notice and Request for Information (RFI) under solicitation number 20270753FDDU to identify qualified vendors capable of providing DNA Buccal Collection Kits and archival cassettes. These kits are used to process DNA databasing samples for the National DNA Index System (NDIS). The FBI intends to establish a single-award contract, potentially via an Indefinite Delivery, Indefinite Quantity (IDIQ) vehicle, with a planned base year period from May 1, 2027, through April 30, 2028. Historically, the baseline annual quantity has been 500,000 kits, and the selected vendor must maintain a minimum inventory of 100,000 complete kits for immediate shipment to handle demand surges. Technical requirements are stringent, mandating the use of Bode Technology non-FTA direct collect devices and archival cassettes compatible with the BSD600 Ascent punch instrument. Each kit must include a color-printed FD-936 data form on 100# Tag Stock paper, nitrile gloves, a fingerprint pad, and a tamper-evident return envelope. A critical requirement is the use of matching 8-character alphanumeric barcodes (format code 128 or 93) across the form, envelope, and collection device. Vendors must be ISO 9000 accredited, specifically holding ISO 9001 certification, as ISO 13485:2016 is not an acceptable substitute. Interested small and large businesses are invited to submit a capability statement of no more than ten pages to Contracting Officer Bryan Lane by November 16, 2026.

POSTED

DEADLINE

Upgrade a Microscope for Fluorescence and Reflected-Light Imaging

Solicitation # 494472

UT-Battelle, LLC, the management and operating contractor for Oak Ridge National Laboratory (ORNL), is soliciting proposals to upgrade a microscope for fluorescence and reflected-light imaging. This procurement, identified by solicitation number 494472, is for products intended for use within a DOE nuclear facility. The award will be granted to the lowest priced, technically acceptable proposal based on a firm fixed price quote. Offerors must provide a proposed delivery schedule and ensure the system arrives at the company site in undamaged, working condition, with shipping notifications provided two weeks in advance. Key deliverables include the supplies specified in the Bill of Materials, written documentation verifying catalogue specifications, and a signed functional test report verifying the operability of installed systems. The contract is governed by a comprehensive set of FAR and DOE clauses, including requirements for the Buy American Act, cybersecurity compliance under DOE O 205.1D, and strict personnel security and access programs. Performance is subject to DOE site safety and health programs, including workplace substance abuse protocols. Proposals must be submitted via email to the Procurement Officer by November 20, 2026, and must include an Exceptions/Non-Compliance section; otherwise, the offeror is deemed to have accepted all terms and conditions unequivocally. This is not a small business set-aside, though offerors must provide representations and certifications regarding their business size and socioeconomic status.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

ARBITRARY WAVEFORM GENERATOR

Solicitation # N0016427Q0014

The Naval Surface Warfare Center (NSWC) Crane has issued solicitation N0016427Q0014 for a firm fixed price, commercial, sole source procurement of six custom Arbitrary Waveform Generators (Manufacturer Part Number: 670C-4C-256M-HV4-GPIB). The equipment must feature 256 Ms memory, a high voltage output of 12Vpp on 50 phm, and a GPIB/USBTMC interface option. The government intends to negotiate exclusively with BNC Corp, as they are identified as the only responsible source capable of meeting the strict physical, technical, and operational readiness requirements necessary to avoid mission delays and financial burden. The contract includes two option years, with delivery schedules for all line items set at six weeks from the date of award or option exercise. The procurement is governed by NAICS 334516 and requires strict adherence to item identification and marking standards, including MIL-STD-130 and MIL-STD-129, using two-dimensional data matrix symbology. All deliveries are FOB Contractor Destination to NSWC Crane in Indiana. The contract incorporates critical cybersecurity requirements, specifically NIST SP 800-171 and FAR clause 252.204-7012 for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system. The closing date for offers is November 25, 2026, at 2:00 PM Eastern Time.

POSTED

DEADLINE

Computed Tomography (CT) Scanner System

Solicitation # SP4706-27-R-XXXX

The Defense Logistics Agency (DLA) has issued a Sources Sought Notice to conduct market research for a brand-new, non-refurbished Industrial Computed Tomography (CT) Scanner System. This notice is intended for information and planning purposes to identify qualified sources, with a specific focus on small businesses, including HUBZone, 8(a), Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. The procurement is categorized under NAICS code 334516 and is designated as a Small Business Set Aside. The required system must be brand-new and capable of operating on standard office power (110V, 20A). It must adhere to strict security standards, being either air-gapped or utilizing a government-secure cloud, and must comply with DoD-approved standards such as NIST SP 800-171 or CMMC. The vendor is expected to provide a complete operational handoff, which includes onsite installation, precision calibration, and comprehensive software training for up to five government employees, along with a minimum one-year manufacturer warranty and technical support. Interested respondents must submit a capability statement of five pages or less by November 30, 2026. This statement should include the company's UEI, CAGE code, and SAM.gov registration status, as well as a determination of whether the system is a Commercial-Off-The-Shelf (COTS) item or requires modification. Additionally, vendors must provide estimated lead times and up to three examples of similar systems delivered and supported within the last three years.

DCSO-COLUMBUS-DIVISION-2

POSTED

DEADLINE

Q301--NEW | Automated Blood Bank Solid Phase Analyzer and Associated Reagents/Consumables

Solicitation # 36C25927Q0058

The Department of Veterans Affairs, Veterans Health Administration, Network Contracting Office 19 is conducting market research through a Sources Sought Notice to identify potential providers for an instrument rental reagent agreement. The requirement is for an Automated Blood Bank Solid Phase Analyzer and associated reagents and consumables to support the Rocky Mountain Regional VA Medical Center. The proposed period of performance is from April 1, 2027, through March 31, 2032. The system must be new, in current production, and FDA approved for in vitro diagnostic methods, maintaining a monthly up-time of 95 percent. Key technical requirements include the ability to perform ABO/Rh testing, antibody screening, antibody identification, antigen phenotyping, Direct Antiglobulin Tests, and crossmatching. The system must achieve a Type and Screen turnaround time of 26 minutes or less and include an automated cell washer and centrifuge. Reagents must be compatible with manual tube testing for backup purposes, or a second analyzer must be provided. The contractor is responsible for providing and maintaining an uninterruptable power supply and ensuring all hardware and software upgrades are installed within 60 days of commercial release. Interested parties must submit a capabilities statement and a completed market research questionnaire by November 25, 2026, at 1630 CST.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Solicitation # W8703-270067/B

The Department of National Defence is soliciting the procurement of one Charpy test machine, including associated software and accessories, to replace an obsolete unit. This laboratory instrument is used to determine the impact toughness and fracture resistance of metallic and engineering materials by measuring energy absorption of notched specimens. The required deliverables include the machine, a set of Charpy Standard Reference Materials, and various fixtures, anvils, and supports for both standard and subsize specimens. The equipment must feature a safety enclosure to contain fragments and prevent accidental pendulum contact, and all electrical components must be certified by an organization accredited by the Standards Council of Canada. The contract is awarded based on the lowest evaluated price among offers that meet all mandatory technical criteria. All goods must be delivered Duty Paid (DDP) to the QETE Supply Warehouse in Gatineau, Quebec, by March 15, 2027. The contractor is required to submit an Equipment Environmental Evaluation and Safety Data Sheets in accordance with WHMIS 2015. Canada retains the right to inspect and test all hardware and licensed programs, with a 30-day inspection period following notification of completion. Payment for undisputed invoices will be processed within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

47064-252805B and 47419-263009B RFP Ion Mobility Spectrometers System

Solicitation # WS5623588395

The Government of Canada, through the Department of Public Works and Government Services, has issued a Request for Proposal for Ion Mobility Spectrometers Systems. This solicitation is specifically open to prequalified respondents under ITQ CW2405177 Chemical Detection Systems - Stream 1 and cancels all previous offers related to solicitation number WS5623588395 dated April 13, 2026. The project falls under NAICS code 334516 and will be performed in the National Capital Region of Ottawa, Canada. Interested parties must submit their responses by the deadline of November 19, 2026. The primary point of contact for this federal procurement process is Natasha Goulet, the Contracting Authority. This solicitation represents a formal effort to acquire specialized chemical detection technology through a competitive bidding process among qualified vendors.

Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 5 days

AI Contract Overview

The National Institute on Drug Abuse intends to award a non-competitive contract to Bruker BioSpin Corporation for the repair and installation of a triple-loop heat exchanger system for a 9.4 Tesla Magnetic Resonance Imaging system. This critical acquisition is necessary to prevent a potential magnet quench and catastrophic damage to the MRI system used by the Neuroimaging Research Branch. The project requires the delivery of new OEM parts, professional installation by certified technicians, and a 12-month warranty. Classified under NAICS code 334516, this procurement is not set aside for small businesses. The government has determined that Bruker BioSpin Corporation is the only source capable of providing the required compatible parts and services to maintain the system's warranty and operational stability. The anticipated award date is around September 2, 2026, and interested parties must submit capability statements and quotations to the designated point of contact by the deadline.

General Info

NIH seeks Bruker-certified emergency heat exchanger replacement for 9.4T MRI with 3-month installation and one-year warranty.

Agency

Department Of Health And Human Services → National Institutes Of Health Nida

Contract Value

$49,906.21

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

MD, USA

Set-Aside

NONE

Awardee

BRUKER BIOSPIN CORP

Award Issued Date

09/04/2026, 12:00:00 AM UTC

Documents

No documents available

This contract was awarded without public documents.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 6

Sources Sought

Type ChangedAug 27

Sources Sought → Presolicitation

AwardedSep 4

Contract was awarded

Submission Closed

09/02/2026, 11:00:00 AM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Health And Human Services → National Institutes Of Health Nida

Contacts1 person available

OfficeBethesda, MD, 20892, USA

Organization / AgencyDepartment Of Health And Human Services → National Institutes Of Health Nida

Office AddressBethesda, MD, 20892, USA

Contacts

Josh Lazarus

Full Description

THIS IS A PRE-SOLICITATION NON-COMPETITIVE (NOTICE OF INTENT) SYNOPSIS TO AWARD A CONTRACT WITHOUT PROVIDING FOR FULL OR OPEN COMPETITION (INCLUDING BRAND-NAME).

The National Institute on Drug Abuse (NIDA), Office of Acquisitions intends to solicit by requesting quotation from Bruker BioSpin Corporation for award on or around September 2, 2026. The purpose of this acquisition will be to provide the “Repair And Installation Services For The Heat Exchanger System On A Bruker 9.4 Tesla Magnetic Resonance Imaging (MRI) System” owned and operated by the Neuroimaging Research Branch (NRB) of the National Institute on Drug Abuse (NIDA) Intramural Research Program (IRP).

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE and SET ASIDE STATUS

The intended procurement is classified under NAICS code 334516 - Analytical Laboratory Instrument Manufacturing. This acquisition is NOT set aside for small businesses.

REGULATORY AUTHORITY

This acquisition is conducted under the authority of 10 U.S.C. 3204(a)(1) and in accordance with RFO 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements.

DESCRIPTION OF REQUIREMENT PURPOSE AND OBJECTIVES:

NIDA IRP requires repair parts and installation services for the Triple Loop Heat Exchanger System on NIDA IRP's Bruker 9.4 Tesla Magnetic Resonance Imaging (MRI) system. The Neuroimaging Research Branch (NRB) within NIDA IRP operates a 9.4 Tesla MRI scanner dedicated to addiction research. The heat exchanger system, a critical component of the scanner, has recently failed. Although a temporary workaround has been implemented by us, it is not a reliable long-term solution and could fail at any time. Failure to permanently resolve this issue poses a significant risk of a magnet quench, which could result in catastrophic damage to the MRI system.

PROJECT REQUIREMENTS:

NIDA IRP requires a Bruker triple-loop heat exchanger; delivery of parts, installation and setup; 12-month warranty.

Salient characteristics: NIDA requires a Triple-loop Heat Exchanger System with the following brand-name or equal salient characteristics:

- Interface with existing scanner software control;
- Use existing building water supply;
- Interface with the magnet cryomech system, gradient and shim coil cooling system
- Ensure stable cryomech working conditions.
- The Magnet pressure must stabilize at 1040 mbar;
- Sufficient cooling to the gradient and shim system so that the temperature in these systems do not exceed specified ranges, i.e. do not trigger over temperature protection, using current demanding scan methods (echo-planer imaging).
- All replacement parts furnished must be new, unused, OEM parts manufactured or authorized by Bruker Corporation. Refurbished, remanufactured, or third-party equivalent parts will not be accepted.
- Installation must be performed by technicians who are certified by Bruker Corporation to service the 9.4 Tesla MRI Heat Exchanger System.
- All work must be performed in a manner that preserves and does not void the current manufacturer's warranty on the MRI system.

CONTRACTING WITHOUT PROVIDING FOR FULL OR OPEN COMPETITION (INCLUDING BRAND-NAME) DETERMINATION

The determination by the Government to award a contract without providing for full and open competition is based upon the market research conducted. Specifically, Bruker Biospin Corporation is the only vendor in the marketplace that can provide the services required by NIDA.

In accordance with RFO part 10, market research was conducted to reach this determination. Only one vendor was identified that could manufacture and provide the required compatible parts and services for the existing system. Therefore, only Bruker BioSpin Corporation is capable of meeting the needs of this requirement.

The intended source is:

Bruker BioSpin Corporation
15 Fortune Drive
Billerica, MA 01821
United States of America

CLOSING STATEMENT

THIS SYNOPSIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, interested parties may identify their interest and capability to respond to this notice.

A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. The information received will normally be considered solely for the purposes of determining whether to proceed on a non-competitive basis or to conduct a competitive procurement.

Responses to this notice shall contain sufficient information to establish the interested parties’ bona-fide capabilities for fulfilling the requirement and include: unit price, list price, shipping and handling costs, the delivery period after contract award, the prompt payment discount terms, the F.O.B. Point (Destination or Origin), the Unique Entity Identifier (UEI), the Taxpayer Identification Number (TIN), and the certification of business size. All offerors must have an active registration in the System for Award Management (SAM) www.sam.gov. FAR clauses 52.212-4, Contract Terms and Conditions – Commercial Items and 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items apply to this acquisition.

All responses must be received by the closing date and time of this announcement and must reference the solicitation number, 75N98026Q00967. Responses must be submitted electronically to Joshua Lazarus at Sign up to see this detail U.S. Mail and Fax responses will not be accepted.