This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PIN-RIVET
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation for PIN-RIVET under SPE4A6-26-T-10CF requires the supply of a single unit of NSN 5320014346611, designated as a BACB30PD7-25X part, to be delivered FOB origin within 20 days of order receipt with a required delivery date of July 22, 2026. The item must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Compliance includes adherence to MIL-STD-1916 or ASQ H1331 for sampling inspections, with zero non-conformances required unless otherwise specified; critical threads must meet SAE AS8879 Category 1 or MIL-S-7742 safety-critical definitions, excluding small self-locking nuts and undersized threads. All items and packaging must be marked and labeled per MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack data, and palletization must follow RP001 DLA Packaging Requirements. Packaging itself must comply with ASTM D3951, though DLA requirements take precedence. Hazardous materials, if present, must include appropriate labeling per 29 CFR 1910.1200 and submission of Safety Data Sheets aligned with Federal Standard No. 313, with pre-award submission of labels and SDS mandated. Delivery is to a designated military facility in McLeansville, North Carolina, with inspection and acceptance occurring at the destination point. The contract includes mandatory clauses on equal opportunity, trafficking in persons, employment eligibility verification, cybersecurity safeguards, sustainable products, and prohibition of internal confidentiality agreements, all subject to Deviation 2026-00038. Invoicing must be conducted exclusively through WAWF, and offerors must provide their Unique Entity Identifier and certify size status and socioeconomic category, including HUBZone eligibility for potential price preferences. The solicitation is candidate for automated award, emphasizing price with no specified evaluation factors beyond technical acceptability, and all proposals must be submitted electronically via DIBBS by the stated response deadline.
General Info
Agency
NAICS
Place of Performance
4252 CAMP BURTON ROAD, MC LEANSVILLE, NC, 27301-0000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
PIN-RIVET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALL CLASS 3A AND 3B THREADS SHALL BE GAGED
I/A/W CATEGORY 1 PER SAE AS8879 OR "SAFETY
CRITICAL THREADS" PER MIL-S-7742 UNLESS
OTHERWISE SPECIFIED. THE ABOVE EXCLUDES
SELF-LOCKING NUTS AND INTERNAL THREADS SMALLER
THAN .190 DIA. AND EXTERNAL THREADS SMALLER
THAN .138 DIA.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SPS TECHNOLOGIES LLC 27624 P/N BACB30PD7-25X
THE BOEING COMPANY 81205 P/N BACB30PD7-25X
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81205 BACB30PD REVISION NR L DTD 07/02/1998 PART PIECE NUMBER: BACB30PD7-25X
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-10CF
SECTION B
PR: 7017607548 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607548 0001 HD 1.000
NSN/MATERIAL:5320014346611
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W36JJU
W8SK NC ARNG FMS 9
4252 CAMP BURTON ROAD
MC LEANSVILLE NC 27301-0000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W36JJU
W8SK NC ARNG FMS 9
4252 CAMP BURTON ROAD
MC LEANSVILLE NC 27301-0000
US
MARKFOR
W36JJU
W8SK NC ARNG FMS 9
4252 CAMP BURTON ROAD
MC LEANSVILLE NC 27301-0000
US
M/F: (TCN) W36JJU61980018
RDD: 555
SPE4A6-26-T-10CF
SECTION B
PR: 7017607548 PRLI: 0001 CONT’D
PROJ: TP 3
SUPP ADD: W81KDP SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE4A6-26-T-10CF NSN/Part Number: 5320-01-434-6611 Quantity: 1 HD Purchase Request: 7017607548QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS