This Solicitation opportunity from Department Of Defense was posted on September 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN-RIVET

Closed

SPE4A6-26-T-33QCFederal

Submission Closed10/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

Federal

MISC LINE HARDWARE FOR WEST FARGOThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of miscellaneous line hardware for West Fargo. This requirement is designated as a small business set-aside under NAICS code 332510, with the place of performance located in Oklahoma. The current incumbent contractor for these services is Energy by Native American Design Corp. Interested parties may coordinate with the Small Business Program Managers, Tetrault or Teves, regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

TRANSMISSION LINES HARDWARE FOR PIERRE SUBSTATION WAREHOUSE - FY26 FH-EB REBUILD PHASE 2The Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of transmission lines hardware to support the Pierre Substation Warehouse for the FY26 FH-EB Rebuild Phase 2. This requirement falls under NAICS code 332510 and is intended to secure necessary hardware components for critical infrastructure rebuilding efforts. The current incumbent contractor for this work is Energy by Native American Design Corp. Interested parties can coordinate with the Small Business Program Managers, Tetrault and Teves, regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

MMO: HARDWARE RESTOCK FOR FORT PECK WAREHOUSEThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a hardware restock project for the Fort Peck Warehouse. This procurement effort falls under NAICS code 332510 and is intended to replenish essential hardware supplies necessary for warehouse operations. Short Powerline Service, LLC is listed as the incumbent contractor for these services. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this upcoming requirement.

Western Area Power Administration

POSTED

DEADLINE

HARDWAREThis forecast opportunity for hardware is issued by Federal Prison Industries under the Department of Justice. The contract is designated as a Small Business Total Set-aside and falls under NAICS code 332510. The place of performance for this requirement is located in Bensenville, Illinois. Robert L. Connolly serves as both the primary point of contact and the Small Business Specialist for this action. Liberty Fasteners is listed as the incumbent contractor. Interested parties can find further details through the Department of Justice forecast contracting opportunities portal.

Inc Federal Prison Industries

POSTED

DEADLINE

Supply of Cylindrical Roller Bearings (PN: 8599810015)This subcontract, issued by the Southwest Regional Maintenance Center under the Department of Defense, involves the supply of three specialized cylindrical roller bearings, part number 8599810015, for prime contractors working on NAVSEA engine equipment projects. The bearings must be genuine OEM or approved equivalents that strictly adhere to NAVSEA specification C-211-H017 and FAR Part 12. Performance will take place in National City, California. The agreement mandates strict compliance with the Buy American Act and requires the implementation of a counterfeit part detection system in accordance with 252.246-7007. Deliverables include the three bearings accompanied by itemized material listings. The solicitation was posted on October 23, 2026, with a response deadline of October 29, 2026, falling under NAICS code 332510.

Southwest Regional Maintenance Center

POSTED

DEADLINE

Manufacture and Supply of Butt Hinges (NSN 5340-01-477-4941 QE)This subcontract with Navsup Weapon Systems Support under the Department of Defense involves the manufacture and supply of new butt hinges, specifically the Leaf Butt Hinge under NSN 5340-01-477-4941 QE. The contractor is responsible for producing the hardware to exact specifications and delivering completed, marked, and packaged units to prime contractors supporting US Navy spare parts contracts. Key technical requirements include packaging according to MIL-STD-2073 and the application of unique item identifiers using 2D data matrix symbology per ISO/IEC 16022. Additionally, the provider must certify the country of origin in compliance with the Buy American and Trade Agreements Act. The opportunity is categorized under NAICS code 332510, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N00173-27-Q-1301394131

The Naval Research Laboratory is soliciting quotations for the purchase of a FieldFox 44 GHz Microwave Analyzer on a firm-fixed-price basis. This procurement is a total small business set-aside under NAICS code 332510 and PSC 6625. The requirement is designated as brand name or equal, and the government will only accept new equipment. All items must be covered by the manufacturer's warranty, and the vendor must be an original equipment manufacturer or an authorized dealer or reseller. The acquisition includes three years of KeysightCare Technical Support. Quotations will be evaluated based on the Lowest Price Technically Acceptable method, where offers are ranked by price and then vetted for technical acceptability. Interested offerors must submit a technical and price quote via email to the primary point of contact, James Chappell, by the response deadline of October 30, 2026. Submissions must include the company's DUNS number, Cage Code, and a statement regarding the acceptance of the solicitation's terms and conditions. Delivery is to be made to the U.S. Naval Research Laboratory in Washington, DC.

Naval Research Laboratory

POSTED

DEADLINE

Solicitation # N0038326QLA98

Solicitation N0038326QLA98 is a request for quotations issued by Navsup Weapon Systems Support in Philadelphia for the procurement of new manufacture spare parts, specifically the Leaf, Butt Hinge (NSN 1RM 5340-01-477-4941 QE). The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Evaluation will also include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier performance. Proposals must remain valid for at least 120 days following submission. The contract requires delivery within 90 days on an FOB Destination basis. Quality standards are governed by ISO 9001, and inspection and acceptance will occur at the contractor's location. Packaging must adhere to MIL-STD-2073, with specific requirements for domestic and overseas shipments, including the use of MIL-STD-129 for marking and labeling. Payment will be processed electronically through the Wide Area Workflow system. The solicitation incorporates various FAR and DFARS clauses, including Buy American and Balance of Payments programs, and requires offerors to maintain active registrations in the System for Award Management.

Navsup Weapon Systems Support

POSTED

DEADLINE

53--ROD AND TUBE ASSY

Solicitation # SPE7L1-27-U-0117

Solicitation SPE7L1-27-U-0117, issued by the DLA Weapons Support Land Supply Chain on October 23, 2026, is a request for quotations for the procurement of Rod and Tube Assemblies under NSN 5340014794617. This is a non-small business set-aside under NAICS code 332510 that may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The requirement includes an estimated annual quantity of 405 units, with a guaranteed minimum of 60 units once the contract becomes binding. Delivery is required within 130 days after receipt of order, with shipping terms set as FOB Origin to various CONUS and OCONUS DLA Depots. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 for labeling, ASTM D3951 for non-hazardous commercial packaging, and RP001 for palletization. Inspection and acceptance will occur at the destination. Offerors must submit quotes electronically by November 6, 2026, and must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Additionally, the use of additive manufacturing is prohibited unless specifically approved. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.

Nashville Electric Service

POSTED

DEADLINE

Supply of Brass Washers (#10-L)This subcontract involves the sourcing and manufacture of large-type round brass washers compatible with #10 screws for prime contractors serving the Nashville Electric Service. The selected provider is responsible for producing the washers, packaging them in one pound cartons, and delivering the finished product to the agency. To ensure quality and technical standards, the contractor must provide descriptive literature for any brands used other than TROY to demonstrate technical equivalence. The performance of this contract takes place in Nashville, Tennessee, under NAICS code 332510.

Nashville Electric Service

POSTED

DEADLINE

Mechanical Actuator Replacement ComponentsThis subcontract involves the provision of replacement parts, seals, and internal components for prime contractors supporting NAVSUP Weapon Systems Support Philadelphia projects. The scope of work requires the manufacture or sourcing of components that strictly adhere to Chamilton Sustained Corporation drawing numbers and TDP Version No. 002 specifications. All delivered items must comply with the limits defined in the repair and overhaul manual and meet MIL-STD-130 marking requirements. The contract focuses on the delivery of individual replacement components or comprehensive kits designed for 45 actuators. Managed under the Department of the Navy, the performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 332510.

Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation SPE4A6-26-T-33QC, issued by the DLA Aviation ASC Commodities Division, seeks quotes for 1,001 threaded pin-rivets under NAICS 332010. The required delivery date is April 21, 2027, with a need ship date of March 17, 2027, for delivery to DLA Distribution Warner Robins in Georgia. Inspection and acceptance will occur at the origin. Offerors must submit quotes via the DIBBS system by September 28, 2026, and are encouraged to provide quantity ranges and a complete data package for approved or alternate parts. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-129 for marking and ASTM D3951 for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Technical requirements include CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and use the Wide Area WorkFlow system for electronic invoicing and payment requests. Manufacturing may require specialized casting or forging tooling, for which the government may not provide assistance.

General Info

DLA seeks quotes for 1,001 threaded pin-rivets delivered to Georgia by April 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-33QC Request for Quotations

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 21

Solicitation

Deadline changedSep 28

Response deadline changed from Sep 28, 2026 to Oct 1, 2026.

Response DeadlineOct 1

Deadline has passed

Submission Closed

10/01/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Shaundrea Granderson

contact@example.gov

+1 (555) 000-0000

Full Description

PIN-RIVET
PIN-RIVET,THREADED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
ADEQUATE DATA FOR NSN/Part Number: 5320-01-321-5306 Quantity: 1,001 EA Purchase Request: 7018412105QTY: 1001 Delivery: 169 days ADO