Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, STRAIGHT, HEADLE

Active
SPE4A6-26-T-12USFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of five straight, headless pins with part number 5315-00-736-5071, issued under solicitation SPE4A6-26-T-12US by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days to a specified address in Jiji Township, Nantou County, Taiwan, with inspection and acceptance occurring at origin and no variance permitted in quantity. The items must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special markings required. Item Unique Identification is not mandated per the service customer’s request, and mercury compounds are strictly prohibited in packaging or preservation. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The technical data package references drawing and quality assurance provisioning dated February 16, 1995, and the unit of issue is each (EA), with a total value of $5.00. Packaging must follow DLA-specific guidelines, including palletization standards, and the contract includes compliance clauses for measurement equipment, removal of government identification from rejected items, and environmental prohibitions. The required delivery date is August 3, 2026, and the contract is managed through DLA with point of contact Debra Fowler.

General Info

Procure five headless pins, delivery by August 3, 2026, to Taiwan, compliance with MIL-STD, no mercury, zero defects.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-12US for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLE
PIN, STRAIGHT, HEADLESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 7365071 REVISION NR F DTD 02/16/1995 PART PIECE NUMBER: 7365071
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19200 7365071 REVISION NR DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 19200 7365071 REVISION NR E DTD PART PIECE NUMBER:
SPE4A6-26-T-12US
SECTION B
PR: 7017673823 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673823 0001 EA 5.000
NSN/MATERIAL:5315007365071
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:A1 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWH00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU COUNTY 55243
TW
MARKFOR
BTWH00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU COUNTY 55243
TW
SPE4A6-26-T-12US
SECTION B
PR: 7017673823 PRLI: 0001 CONT’D
M/F: (TCN) BTWH5362082321
RDD: 266
PROJ: TP 2
SUPP ADD: BA4BER SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: B04 ADV: 2L FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A6-26-T-12US NSN/Part Number: 5315-00-736-5071 Quantity: 5 EA Purchase Request: 7017673823QTY: 5 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract specifies the procurement of a Right Hand Single Arm Mounting Bracket with NSN 5340-01-615-0030 under solicitation SPE7LX-26-U-9329, issued as a total small business set-aside under NAICS code 332510. The estimated quantity is 176 units with delivery to be made FOB origin within 116 days of order placement, though the contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) instrument with no binding obligation until a specific delivery order is issued. Inspection and acceptance occur at the destination point, and compliance with military standards is mandatory: packaging must adhere to MIL-STD-2073-1E with preservation method 10 (clean and dry), while markings follow MIL-STD-129 and item identification complies with MIL-STD-130N, including permanent marking and barcoding. Sampling and inspection procedures require zero non-conformances using MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes. Hazardous materials must be labeled per 29 CFR 1910.1200 and require pre-award submission of Safety Data Sheets and a disclosure table identifying exempted substances under specific federal statutes. Payment must be processed electronically through WAWF, and the contractor is subject to a wide array of FAR and DFARS clauses covering small business representation, employment eligibility, trafficking in persons, cybersecurity safeguards, export control, and prohibitions on sourcing from certain entities. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking or cushioning specified. The contract carries a maximum value of $350,000, though unit price data is not provided, and award will be made on a lowest price technically acceptable basis. The contracting officer’s representative and payment office details are not included but will be provided post-award through DD Form 1155 and DoDAAC codes.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract is for the procurement of 631 mounting brackets, identified by NSN 5340-01-647-8723, under solicitation SPE7LX-26-U-9318, issued by the Strategic Acq Program Directorate of the Department of Defense. Delivery is required within 113 days after receipt of order, with a guaranteed minimum of 94 units and a contract ceiling of $350,000. The contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle, meaning orders will be issued during a one-year period following award, with performance dictated by individual delivery orders. FOB origin applies, placing delivery responsibility on the contractor to the origin point, while inspection and acceptance occur at the destination under government oversight governed by FAR 52.246-2. Packaging must comply with RP001 DLA requirements, ASTM D3951 for non-hazardous items, and FED-STD-313 for hazardous materials, with labeling conforming to MIL-STD-129 and 29 CFR 1910.1200. Hazardous materials require pre-award submission of hazard labels and safety data sheets, and foreign-flag vessel use for ocean transport is prohibited unless a waiver is obtained at least 45 days in advance. The contract incorporates numerous FAR and DFARS clauses, including mandatory cybersecurity provisions such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring NIST SP 800-171 compliance for protecting controlled unclassified information on contractor systems. Additional clauses enforce compliance with export controls, prohibitions on hexavalent chromium and communist Chinese military company products, whistleblower rights disclosures, and electronic invoicing through WAWF. The contractor must also adhere to levies on payments for outstanding debts, subcontracting transparency for commercial items, and pricing methodologies for modifications. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. Offerors must submit electronic responses via DIBBS by August 20, 2026, and are required to complete mandatory representations regarding small business status, UEI, and compliance with defense information handling standards, though no offeror-specific certifications are present in the solicitation
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract is for the procurement of 180 units of CRANK, HAND with NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Defense Logistics Agency through an Indefinite-Delivery Contract (IDC) with a maximum value of $350,000. The estimated annual quantity is non-binding, and the guaranteed minimum is 27 units. Delivery is FOB Origin with a 76-day delivery window after order placement, and the final delivery destination is within the Continental United States under DLA Direct CONUS coverage. Inspection and acceptance occur at the destination point by the Government. Packaging must adhere to DLA’s RP001 packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous items packaged per ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Hazardous materials must comply with TQ IP025, and all packaging must reflect the specified QUP of 001. Bar-coding follows MIL-STD-129 standards, and radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries per item require explicit labeling per the same standard. Safety Data Sheets are mandatory for hazardous materials, and all labeling must comply with 29 CFR 1910.1200. The contract mandates full compliance with cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012, including 72-hour reporting of cyber incidents, and flow-down requirements to subcontractors. Contractors must use E-Verify for employment eligibility, maintain anti-trafficking compliance programs, and avoid use of prohibited telecommunications equipment from suppliers like Huawei, ZTE, Hikvision, or Dahua. All submissions must be made electronically via the DLA Internet Bid Board System (DIBBS) by August 20, 2026, with invoicing handled exclusively through Wide Area WorkFlow. Offerors must disclose their Unique Entity Identifier and CAGE code, represent their small business status and socioeconomic certifications, and provide UEIs for joint venture partners if applicable. The contract includes clauses governing unenforceable obligations, accelerated payments to small business subcontractors, sustainable products, and prohibition of unauthorized obligations,
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract is a Simplified Indefinite-Delivery Contract (SIDC) issued under solicitation SPE7LX-26-U-9327 by the Department of Defense’s Strategic Acquisition Program Directorate, specifically for the supply of CLAMP, LOOP items identified by NSN 5340-01-485-6847, with a total quantity of 2,082 each. The contract is structured as a total small business set-aside under NAICS code 332510, with a maximum contract value of $350,000 and a guaranteed minimum order of 312 units. Deliveries must be completed within 116 days of each order’s effective date, with FOB origin terms placing transportation responsibility and risk on the government after shipment from the contractor’s facility. All deliveries occur within the continental United States, and orders must be issued within one year of contract award. The contract incorporates extensive technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override commercial standards unless explicitly superseded, and mandates full compliance with MIL-STD-129 for packaging, marking, and labeling, including hazardous material handling per FED-STD-313 and 29 CFR 1910.1200. Packaging must also adhere to RP001 for palletization and ASTM D3951 for non-hazardous items, with barcoding required for logistics tracking. Inspection and acceptance occur at destination under FAR 52.246-2, and invoicing must be submitted electronically through WAWF. The contractor must affirm small business status and comply with extensive DFARS clauses addressing whistleblower rights, conflicts of interest involving former DoD officials, data handling, cybersecurity (NIST SP 800-171), trafficking in persons, employment eligibility, sustainable procurement, hazardous materials, and prohibition of foreign telecommunications equipment from specific Chinese entities. Special contractual provisions include unilateral contract formation through acceptance of the first order, mandatory disclosure of UEI and CAGE codes if offering covered defense equipment, and strict controls on the use and disclosure of government work products and controlled information. Proposal submissions are exclusively required via DIBBS by August 20, 2026, with no paper submissions permitted.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-12TZ
This contract specifies the procurement of 3 hundred-count units of blind rivets under NSN 5320-01-033-8176, with a unit of issue of HD (100), requiring strict compliance with technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application component and must conform to non-government standards NAS9304 Rev 7, NAS1686 Rev 5, and Quality Assurance Provision 13873, with inspections performed at origin and acceptance determined there as well. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels corresponding to AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. All packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. Delivery is due in 165 days FOB origin to Hill Air Force Base, Utah, with a required ship date of January 26, 2027, and original delivery date of March 21, 2027. The contractor must provide a Certificate of Quality Compliance and ensure all materials bear proper physical identification per RQ017, with government identification removed from non-accepted items per RQ011. Packaging and marking must meet all DLA mandates that supersede industry standards, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is managed under solicitation SPE4A6-26-T-12TZ, with primary point of contact Debra Fowler, and the solicitation was issued on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 332510 and is sourced through the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details