Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pipeline Capping Harbor Development Permit No. 25-039

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Port of Long Beach is seeking services for the Pipeline Capping project under Harbor Development Permit No. 25-039, located at Anaheim Street within Harbor Planning District 1 in Long Beach, California. The scope of work requires the excavation of an area approximately 6 feet deep, 5 feet wide, and 8 feet long to expose both ends of an existing idle 8-inch oil pipeline. Once exposed, the contractor must perform necessary cleanout procedures, cap both ends of the pipeline, and complete backfilling to restore the surface. This project is classified under NAICS code 237120 and is currently listed as a forecast with a posted date of September 2, 2025. The project has been granted a Notice of Exemption under CEQA Guidelines Sections 15301 and 15304, as it involves minor land alterations and no expansion of existing or former use. Primary administrative contact for the project is Amy Wong, Environmental Specialist Assistant with the Port of Long Beach, and Jeffrey Kohn, Land and Right of Way Manager.

General Info

Excavate and cap idle 8-inch oil pipeline at Anaheim Street, Long Beach, under CEQA exemptions.

Agency

California → Long Beach, Port of

NAICS

237120 - Oil and Gas Pipeline and Related Structures ConstructionView NAICS

Place of Performance

Long Beach, CA

Set-Aside

NONE

Documents

(1)

Notice of Exemption for Pipeline Capping Harbor Development Permit No. 25-039

PDF•notice-of-exemption

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PostedSep 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Long Beach, Port of

Contacts2 people available

OfficeN/A

Organization / Agency

California → Long Beach, Port of

Office AddressN/A

Contacts

Jeffrey KohnLand and Right of Way Manager

contact@example.gov

+1 (555) 000-0000

Amy WongEnvironmental Specialist Assistant

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Excavate approximately 6-feet (D) x 5-feet (W) x 8-feet (L) to expose both ends of an existing idle 8-inch oil pipeline, perform necessary cleanout procedures, and cap both ends.

Similar Contracts

Same NAICS industry code

Geotechnical Drilling and SamplingThis subcontract for Geotechnical Drilling and Sampling supports Texas Department of Transportation districts through the Texas Comptroller of Public Accounts. The selected provider will perform field exploration services, including core drilling, the installation of piezometers, and both cone penetration and standard penetration testing using track-mounted or truck-mounted drill rigs. All field crews are required to maintain OSHA safety certifications to ensure compliance with site standards. The contractor is responsible for delivering comprehensive field exploration reports, borehole logs, and recovered soil and rock samples. This opportunity falls under NAICS code 237120 and has a response deadline of October 5, 2026.

Texas Department of Transportation

POSTED

DEADLINE

ID-CAMAS NWR- Fuel Tanks Wiring

Solicitation # 140FC326Q0056

Construction A/e Team 3 Fws

POSTED

DEADLINE

Fuel Tank Removal and Replacement, Colebrook River Lake, Colebrook, CT

Solicitation # W912WJ26QA164

The U.S. Army Corps of Engineers New England District is soliciting quotes for the removal and replacement of fuel storage equipment at the Colebrook River Lake gatehouse in Colebrook, Connecticut. The project involves removing a 600-gallon fuel tank, a 10-gallon day tank, a fuel transfer pump, and associated supply lines. These will be replaced with two 275-gallon double-walled insulated fuel tanks, a new 10-gallon day tank, a fuel transfer pump, and all necessary piping, gauges, and grounding systems. The scope includes installing new fuel supply and return lines to the furnace and generator, followed by a 30-minute operational test of both systems to ensure proper fuel flow. This small business set-aside procurement under NAICS code 237120 has an estimated value of less than $25,000 and a performance period of 120 calendar days. All work must adhere to USACE Safety and Occupational Health Requirements (EM 385-1-1), NFPA 780, and API 2003 and 651 standards. Qualified personnel, including Master or Journeyman Electricians and certified crane operators, are required. The government will award a firm-fixed-price purchase order based on a comparative evaluation of technical capability, past performance, and price. Vendors must maintain an active SAM.gov registration to be considered responsive, and the final response deadline is September 22, 2026.

W2SD Endist New England

POSTED

DEADLINE

Horizontal Directional Drilling (HDD) Pipeline InstallationThis subcontract involves the installation of a 22-inch pipeline section for prime contractors on California Department of Fish and Wildlife projects located in Riverside County. The scope of work specifically requires the execution of horizontal directional drilling bores to install the LS-111 pipeline beneath Morongo Wash in Cathedral City. The contractor is responsible for the management of drilling fluids and spoils in strict accordance with the Lake and Streambed Alteration Agreement and Section 1602 of the Fish and Game Code. To qualify for this project, the contractor must possess a CA A-General Engineering or C-34 license and provide the necessary HDD rig to complete the installation. The final deliverable is the successfully installed pipeline. This opportunity is associated with the California Department of Fish and Wildlife, Region 6 - Inland Deserts, and falls under NAICS code 237120.

Fish and Wildlife, Region 6 - Inland Deserts, Ontario

POSTED

DEADLINE

SFPP LS-111 Morongo Wash Relocation Project - 2025 (Notification of Lake or Streambed Alteration, No. EPIMS-RIV-61748-R6)The SFPP LS-111 Morongo Wash Relocation Project 2025 involves the replacement of a 22-inch volatile liquid pipeline within an existing right of way in Cathedral City, California. The scope of work is specifically limited to streambed impacts resulting from the use of horizontal directional drilling to replace a section of the LS-111 pipeline located under Morongo Wash. The project site is situated in Riverside County, south of Interstate 10 and east of Gene Autry Trail, within Sections 31 and 32, Township 3 South, Range 5 East. This project is governed by Lake and Streambed Alteration Agreement EPIMS Notification No. EPIMS-RIV-61748-R6, executed by the California Department of Fish and Wildlife pursuant to section 1602 of the Fish and Game Code. Additionally, the project has been granted a statutory exemption under California Code of Regulations Title 14 CCR section 15284 for the replacement of a volatile liquid pipeline. The agreement was signed on September 14, 2026, and falls under NAICS code 237120.

Fish and Wildlife, Region 6 - Inland Deserts, Ontario

POSTED

DEADLINE

DESC2103C - Bulk Fuel Storage Tanks Phase II, Yokota Air Base, Japan

Solicitation # W912HV26RA009

Solicitation W912HV26RA009, managed by the USACE Japan Engineer District, is for the DESC2103C Bulk Fuel Storage Tanks Phase II project at Yokota Air Base, Japan. The project involves the construction of a 100,000-barrel cut-and-cover JP-8 storage tank, a reinforced concrete pump house featuring vertical turbine pumps, and an access tunnel. The scope includes installing an automatic tank gauging system, a product saver tank, and establishing critical piping and control system connections to an existing filter separator building. The estimated magnitude of the project is between 7.5 and 15 billion Yen, with a performance period of 1,020 calendar days from the notice to proceed. This solicitation is restricted to local sources in Japan. The contract will be awarded based on the Lowest Price Technically Acceptable process, requiring offerors to be rated as acceptable across three factors: construction experience, system supplier subcontractor experience, and past performance. Specifically, prime contractors must demonstrate experience with at least one fuel facility project valued at 1 billion JPY or more completed within the last 20 years, while system suppliers must show experience on at least five projects completed within the last five years. Proposals are due by January 25, 2027. Key contractual terms include liquidated damages of 615,000 Yen per day of delay, a DO-C2 priority rating, and the requirement to follow EM 385-1-1 safety procedures. Required submissions include a Contractor Quality Control Plan, an Accident Prevention Plan, and an Environmental Protection Plan within specified timeframes following the notice to proceed.

W2SN Endist Japan

POSTED

DEADLINE

117 Fuel Tank Removal

Solicitation # W50S6M26QA018

The 117th Air Refueling Wing in Birmingham, Alabama, is soliciting a Firm Fixed Price contract under solicitation W50S6M26QA018 for the environmental closure and removal of three 5,500-gallon fuel tanks. The scope of work includes the removal of associated catwalks, scaffolding, and electrical components and conduit leading to Building 40, as well as the purging and disposal of fuel and water mixtures from the tanks. All work must be performed in accordance with EPA and Air Force Regulations, as well as ANGETL, ANG Handbook, and Unified Facilities Criteria. The project is a total small business set-aside under NAICS 237120, with a performance period of 90 days from September 30, 2026, to January 8, 2027. Offers are due by September 23, 2026, and must be submitted electronically to the designated points of contact. A complete proposal package requires a signed SF 1449, a priced CLIN schedule, relevant representations and certifications, and two to three past performance references. Award will be based on the best value, considering price, technical acceptability, and past performance. A site visit is highly encouraged for September 17, 2026, though pre-registration with personal identification details is required for installation access. Payment will be processed monthly in arrears through the Wide Area Workflow system.

W7MT Uspfo Activity Alang 117

POSTED

DEADLINE

Remove and Replace Underground Product Piping

Solicitation # MDT-316610-MS

The Montana Department of Transportation (MDT) is soliciting bids for the removal and replacement of underground product piping under solicitation number MDT-316610-MS. This Invitation for Bid (IFB) requires a contractor to provide all labor, materials, and equipment necessary to complete the work as a lump sum service. The project is scheduled for execution between March 15, 2027, and June 15, 2027. Bids must be submitted via the eMACS portal by October 1, 2026, at 2:00 PM MDT. To be considered responsive, bidders must provide a brief narrative detailing their technical approach, schedule, and anticipated project duration. Mandatory requirements include a current DEQ license for the installation of underground tank systems and registration with the Department of Labor and Industry under sections 39-9-201 and 39-9-204, MCA. Additionally, offerors must certify compliance with 30-20-301, MCA, regarding nondiscrimination against firearm entities. For any bid totaling $150,000 or more, a bid proposal security equal to 10% of the total offer is required; failure to provide this security will result in automatic disqualification. The contract is subject to 2026 Heavy Construction prevailing wage rates and standard State and MDT terms and conditions, with payment terms set at Net 30.

POSTED

DEADLINE

Fueling System Piping & InstallationThis subcontract for the Department of Defense involves the installation and repair of fuel piping systems for prime contractors on USACE Omaha District projects located in Greenville, Kentucky. The scope of work includes excavation for pipe laying, the installation of fuel-grade piping, welding, pressure testing, and leak detection to deliver a fully pressure-tested fuel delivery system. The contractor is required to utilize fuel-compatible piping and hydrostatic testing pumps while maintaining AWS welding certifications. All operations must strictly adhere to NFPA 30 and EPA UST regulations. This project falls under NAICS code 237120 and is managed by the W071 Endist Omaha office.

W071 Endist Omaha

POSTED

DEADLINE

W.H. Ford RTC Fueling System Repairs

Solicitation # W9128F26RA018

The U.S. Army Corps of Engineers, Omaha District, is issuing a pre-solicitation notice for the repair of the WH Ford RTC Fueling System located in Greenville, Kentucky. Under solicitation number W9128F26RA018, the project encompasses a wide range of infrastructure improvements, including the repair of dispenser and offload island concrete, the installation of asphalt circulation pavement, and the mounting of leak detector probes. The scope also includes replacing canopy and aboveground fuel pipeline coatings, installing roof penetration boot seals for tank vent pipes, and providing an EFSO station on the dispenser island. Additional technical requirements involve replacing tank vents, repairing tank grounding, providing grounding for tank stairs, and modifying existing platforms to ensure safe access to tank appurtenances. The contractor will also be responsible for upgrading the ATG console and modules, providing a deadman for truck loading, and replacing pump motor nameplates. This effort falls under NAICS code 237120 for Oil and Gas Pipeline and Related Structures Construction, with a size standard of 45 million dollars. The Request for Proposal is expected to be issued around September 28, 2026, with a projected closing date of November 20, 2026.

W071 Endist Omaha

POSTED

DEADLINE

Gas Main InstallationThis subcontract involves the installation of 16,500 linear feet of 6-inch high-pressure steel gas main for prime contractors on City of Buford PHMSA grant projects. The scope of work includes both trenched and untrenched installations, as well as the placement of line valves and connections. The selected provider must utilize trenchless boring equipment and ensure full compliance with the Build America, Buy America Act. To be eligible, the contractor must hold a valid Georgia State Contractor's License and be an SRCS Operator Qualification subscriber. The project is categorized under NAICS code 237120, with a response deadline of October 8, 2026. The final deliverable is the completed installation of the gas main system.

POSTED

DEADLINE

Buford Highway Natural Gas Main Replacement Project - 2023 PHMSA Grant

Solicitation # 250308

The City of Buford, Georgia, is soliciting sealed bids for the Buford Highway Natural Gas Main Replacement Project, identified as Project Number 250308. The scope of work involves the installation of approximately 16,500 linear feet of 6-inch high pressure steel gas main, encompassing both trenched and untrenched installation, as well as the placement of line valves, connections, and other appurtenances. This project is partially funded by a PHMSA Federal Grant from the U.S. Department of Transportation, making it subject to 2 CFR Part 200 and the Build America, Buy America Act, which requires that iron, steel, and manufactured materials be produced in the United States unless a specific waiver is granted. The contract will be awarded to the lowest responsible and responsive bidder based on the base bid. To be eligible, bidders must hold a Georgia State Contractor’s License in compliance with O.C.G.A. sections 43-14 and 43-41 and be current subscribers to the Subscribed Regulatory Compliance Service Operator Qualification Program. Bids must be submitted to Buford City Hall by October 8, 2026, at 10:00 a.m. local time and must include a bid guarantee of five percent of the bid price. The successful bidder will be required to provide performance and payment bonds each totaling 100 percent of the contract price and will undergo verification via SAM.gov to ensure they are not suspended or excluded from federal awards.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS