This Sources Sought opportunity from Department Of Defense was posted on January 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Plastic Waste Processor Prototype

Closed

N00167-26-CR-0002Federal

Submission Closed02/16/2026, 04:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248

New

DIBBS

WINCH, DRUM, HAND OPERAT

Solicitation # SPE8EE-27-T-0335

Solicitation SPE8EE-27-T-0335, issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, is for the procurement of 16 hand-operated drum winches under NSN 3950015954485. The requirement specifies a delivery timeline of 167 days after order, with an original required delivery date of March 21, 2027, and a need ship date of April 26, 2027. Delivery is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Each shipment must include an EPA approved Consumer Information Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract incorporates various federal and defense clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes are to be submitted via the DLA Internet Bid Board System.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Industrial Textile Shredder SupplyThis subcontract involves the supply of one fully assembled industrial textile shredder designed for prime contractors working on Department of National Defence projects in Petawawa, Ontario. The equipment must feature a dual-shaft cutting system with a throughput capacity of 300kg/h, specifically engineered to process Kevlar military gear. To ensure operational safety and efficiency, the unit must integrate emergency shut-offs, safety interlocks, automatic oilers, and a manual reversing gear, all mounted on a fabricated support stand providing 37-inch floor clearance. The procurement is categorized under NAICS code 333248 and is managed through the Government of Canada. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a final response deadline of November 30, 2026.

Department of National Defence

POSTED

DEADLINE

Industrial Textile Shredder

Solicitation # W0107-275657

The Department of National Defence is seeking offers for the provision, installation, testing, and training of one industrial textile shredder to be delivered to Petawawa, Ontario. The required equipment must feature a dual-shaft cutting system with a minimum throughput of 300kg/h, capable of processing up to five pieces of CADPAT military gear, including Kevlar-based textiles, in a single pass with output sizes between 2 to 12 inches. The machine must fit within dimensions of 3.0m W x 1.0m D x 2.0m H and include a support stand with a minimum floor clearance of 37 inches. Essential safety features include an emergency shut-off, safety interlocks for doors and latches, an automatic oiler, and automatic reverse on overload with a manual reversing gear. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria. The successful contractor must hold a valid Designated Organization Screening (DOS) and Reliability Status security clearance. Deliverables, including the equipment and a bilingual operating manual in English and French, must be received by March 29, 2027, under Delivered Duty Paid (DDP) terms. The scope of work also includes onsite training for at least six CAF personnel. The contract is governed by the laws of Ontario, and payments will be made within 30 days of receiving an acceptable invoice.

Department of National Defence

POSTED

DEADLINE

Provision of two New production line in Deir-EZ-Zor

Solicitation # UNDP-SYR-00719

The UNDP Syria Country Office Procurement Unit is seeking offers for the provision of two new production lines to be located in Deir-Ez-Zor, Syrian Arab Republic. This solicitation, identified by number UNDP-SYR-00719, requires interested suppliers to submit their proposals electronically through the designated system. Prospective bidders must follow the specific instructions provided in the solicitation document and available user guides. New users are required to register a profile via the UNDP procurement portal, while existing users should utilize their current accounts. To stay informed of any amendments to the tender, suppliers are encouraged to search for the specific tender using system filters and subscribe for notifications. For further assistance, inquiries can be directed to Shouaib Al Khuder at the provided procurement email address.

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0471

Solicitation SPE2DH-27-T-0471 is a fixed-price procurement issued by the Defense Logistics Agency (DLA) Medical Supply Chain for the acquisition of blood diluting vials. The requirement is for eight packages of FDM Vial Kits, with each package containing 50 vials with felt pads (NSN 6640-01-679-7729). The items are to be delivered FOB Destination to the Southwest Regional Maintenance Center in San Diego, California, with a required delivery date of November 12, 2026. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as packaging standards MIL-STD-2073-1E and Medical Marking Standard No. 1. All hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO

Solicitation # W519TC26ACSO

The Army Contracting Command - Rock Island is seeking qualified vendors through a Commercial Solution Opportunity to modernize the Automated Fluidized Bed Mixer Facility at Pine Bluff Arsenal. The project requires an automated, high-precision mixing, granulation, and drying system with a capacity of 800 to 1200 lbs to support colored smoke energetics production. Key technical requirements include sub-millimeter granulation consistency, a maximum re-blend rate of five percent, and strict compliance with hazardous environment standards for Class I and II, Division 1 areas. The system must integrate advanced safety features, including high-speed fire detection and suppression, automated fail-safe shutdown protocols for temperature and pressure spikes, and specialized venting to prevent deflagration. This acquisition follows a streamlined process authorized by DFARS 212.70 and FAR Part 12, open to both traditional and non-traditional defense contractors. The selection process consists of three phases: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Full Quote. Final awards will be based on a Firm-Fixed-Price model, with evaluations focusing on technical merit, innovation, financial feasibility, and the impact on operational readiness and safety. Vendors must provide detailed engineering drawings, a regulatory compliance matrix, and a comprehensive logistics plan for delivery and installation at the Pine Bluff Arsenal site.

POSTED

DEADLINE

Specialized Non-Destructive Testing (NDT) & FinishingThis subcontract for Specialized Non-Destructive Testing (NDT) and Finishing supports DLA Weapons Support Land Supplier Operations Vehicle Support. The selected contractor will perform critical characteristic verification and surface treatments for prime contractors, specifically conducting magnetic particle inspection, shot peening, and Rockwell hardness testing for RC 39-43. All work must adhere to surface quality standards per SS9208 para. 3.1 and calibration requirements per ANSI/NCSL Z540-1994, with final deliverables consisting of verified parts and detailed inspection reports. The opportunity is a total small business set-aside under NAICS code 333248, with performance located in Corpus Christi, Texas. Interested parties must respond by November 19, 2026. This project is managed by the Department of Defense to ensure the structural integrity and quality of critical weapon system components.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of Internal Wrenching Bolts (NSN 5306011224689)This subcontract involves the manufacture and supply of 22 internal wrenching bolts (NSN 5306011224689) for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the bolts according to Part Number 965834-110 and Critical Application Item standards, ensuring all materials are Berry Amendment compliant. Quality assurance and sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331, and the contractor is required to maintain a CMMC Level 2 self-assessment. Final products must be packaged per ASTM D3951 and MIL-STD-129 for delivery to DLA Distribution Warner Robins, Georgia. The project falls under NAICS code 333248, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Total Small Business Set Aside for Brand Name: High Purity Northwest (2) Thermo-Vac Vacuum Dehydrator & Filtration Systems and (2) Laser Particle Counter with ISO Codes & Water Content Displays

Solicitation # N61331-27-Q-TR07

The Naval Surface Warfare Center is soliciting a Total Small Business Set-Aside for the procurement of specialized oil purification and analysis equipment for the LCAC100 class hovercraft. The requirement consists of two High Purity Northwest Thermo-Vac Vacuum Dehydrator and Filtration Systems and two Laser Particle Counters with ISO Codes and Water Content Displays. The equipment must meet specific technical standards, including a consistent 5 GPM process flow rate and a 50-torr vacuum pump configuration with a rotary claw to remove free, emulsified, and dissolved water from synthetic lubricants. Award will be determined on a Best Value basis, evaluating price, delivery schedule, quality, and past performance via the Supplier Performance Risk System. Quotes must be submitted in PDF format on company letterhead to Terra Roberts by the deadline, including the offeror's CAGE code, delivery lead times, and detailed technical specifications. Payment terms are NET 30 days processed through the Wide Area Workflow system. Deliveries to Panama City Beach, Florida, must be made Monday through Friday between 0900 and 1430. The contract is a fixed-price commercial item procurement incorporating various FAR and DFARS clauses regarding cybersecurity, Buy American requirements, and item unique identification.

Naval Surface Warfare Center

POSTED

DEADLINE

TECHNOLOGY LICENSING OPPORTUNITY: GasFlow DLP Printing Interface

Solicitation # S-133794

The GasFlow DLP Printing Interface, developed by Los Alamos National Laboratory, is a patented technology designed to enhance resin-based 3D printing processes such as DLP and SLA. The system utilizes a circulation mechanism that introduces an immiscible, high-density perfluorinated fluid treated with inert gas beneath the printable resin. This creates a stable fluid-fluid interface that removes oxygen from the curing zone, significantly reducing oxygen inhibition. As a result, the technology enables the production of finer details, specifically features below 50 microns, increases print speeds by at least one-third, and improves overall part consistency and material flexibility. This technology is currently at TRL 4 and is available for exclusive or non-exclusive licensing to companies in sectors including additive manufacturing, medical and dental fabrication, electronics, and aerospace. Beyond improving resolution and speed, the system offers temperature control to manage heat buildup and extend resin lifetime. Interested parties can contact the Department of Energy contractor, Triad, regarding this licensing opportunity, which is listed under solicitation number S-133794 with a response deadline of April 6, 2027.

Triad - DOE Contractor

POSTED

DEADLINE

Стенд для перевірки форсунок системи Common Rail , відповідний код ДК 021-2015-34328000-2 - Випробувальні стенди, набори для переобладнання автомобіля та паси безпеки

Solicitation # UA-2026-11-06-004948-a

The Government of Ukraine, specifically the State Educational Institution Kovel Center for Professional and Technical Education, is soliciting bids for the procurement of a Common Rail fuel injector testing stand. This project is co-financed by the European Union through the Ukraine Facility and falls under the classification for testing stands and vehicle conversion kits. The solicitation, identified by number UA-2026-11-06-004948-a, was posted on November 6, 2026, with a response deadline set for November 22, 2026. The equipment will be utilized in Kovel, Volyn region, and interested parties can coordinate through the primary point of contact, Olga Yevhenivna Dryhulia.

ДЕРЖАВНИЙ НАВЧАЛЬНИЙ ЗАКЛАД "КОВЕЛЬСЬКИЙ ЦЕНТР ПРОФЕСІЙНО-ТЕХНІЧНОЇ ОСВІТИ"

POSTED

DEADLINE

ДК 021:2015: 42990000-2-Машини спеціального призначення різні (обладнання первинної очистки)

Solicitation # UA-2026-11-05-011995-a

PrJSC AK Kyivvodokanal is conducting a procurement process for various special purpose machinery, specifically primary treatment equipment. This solicitation, identified by number UA-2026-11-05-011995-a, is funded through the organization's own resources. The tender is open to legal entities and business entities operating in specific economic spheres as defined by Ukrainian law. The selection process is based entirely on a price criterion, which carries a weight of 100 percent. All tender proposals must be submitted in the Ukrainian language. The deadline for responses is November 23, 2026, at 14:00 UTC. Performance of the contract will take place in Ukraine according to the provided documentation.

ПРИВАТНЕ АКЦІОНЕРНЕ ТОВАРИСТВО "АКЦІОНЕРНА КОМПАНІЯ "КИЇВВОДОКАНАЛ"

POSTED

6 days ago

DEADLINE

in 12 days

General Info

Agency

Department Of Defense → Nswc Carderock

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

Bethesda, MD, 20817, USA

Set-Aside

NONE

Documents

3 pages · sources-sought

Low

3 pages · sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedJan 8

Sources Sought

Notice updatedJan 28

Response deadline changed from Jan 30, 2026 to Feb 16, 2026. The point of contact changed.

Response DeadlineFeb 16

Deadline has passed

Submission Closed

02/16/2026, 04:00:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Carderock

Contacts2 people available

OfficeBETHESDA, MD, 20817-5700, USA

Organization / AgencyDepartment Of Defense → Nswc Carderock

Office AddressBETHESDA, MD, 20817-5700, USA

Contacts

Christopher C. Rolince

David Crouch

Full Description

The Naval Surface Warfare Center Carderock Division (NSWCCD) is seeking information from potential sources on the fabrication of the Next Generation Plastic Waste Processor (PWP(X)).