This Solicitation opportunity from Department Of Defense was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PLATE, CLAMP, STRAP

Closed

SPE4A7-26-T-305FFederal

Submission Closed05/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

Supply of Reaction Cylinder Assemblies (NSN 2540016050547)

POSTED

DEADLINE

10--JURY STRUT ASSEMBLY

Solicitation # SPE7LX-26-U-002F

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of five Jury Strut Assemblies under NSN 1055-01-127-8293. The contract is a total small business set-aside with a delivery requirement of 259 days after order. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Due to the nature of the items, the contract mandates compliance with demilitarization protocols for small arms parts and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # 46600-eRFQ-001981-2027

The Georgia Department of Public Safety, through the Georgia Public Safety Training Center, has issued solicitation 46600-eRFQ-001981-2027 to procure Staccato holsters. This Request for Quotes was posted on September 10, 2026, with a response deadline of September 16, 2026. The contract will run from the date of award through the end of the state's current fiscal year, which concludes on June 30, with the state maintaining four optional one-year renewal terms. Qualified suppliers must submit their responses via the GA@WORK Marketplace, including a completed cost worksheet, tax compliance forms, and a certificate of non-collusion. Evaluation criteria include cost, minimum experience, and a review of business litigation or debarment history over the last five years. Preference is given to businesses domiciled in Georgia. The procurement process also requires the submission of E-Verify forms and adherence to strict prohibitions regarding inmate contact. Kaylee Maynor serves as the primary point of contact for this solicitation.

Department of Public Safety

POSTED

DEADLINE

Manufacture of Mortar Plungers (NSN 1010017148005)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Weapon System Component (NSN 1005-00-714-6365)

POSTED

DEADLINE

Supply of Gun Carriage Assemblies (NSN 1005-01-504-2915)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Manufacturing (Piston, Gun Gas Cylinder)

POSTED

DEADLINE

Supplier of Small Arms Cleaning Pull-Throughs (NSN 1005-01-478-2261)

POSTED

DEADLINE

Supply of 30mm Small Arms Bore Cleaning Brushes

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Resilient Weapon System Mounts (NSN 5342-00-143-0673)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract pertains to the procurement of one unit of a Plate, Clamp, Strap with NSN 5342-01-188-7789, issued under solicitation SPE4A7-26-T-305F by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, and marking must adhere to MIL-STD-129 without special identification codes. Palletization follows DLA packaging requirements, and all packaging materials are strictly prohibited from containing mercury or mercury compounds. The item must be delivered to USS WINSTON S CHURCHILL DDG 81 at FPO AE 09591, with shipment instructions governed by DLAD PROC NOTES C19 and C20. Sampling procedures require compliance with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with attributes classified as Critical, Major, or Minor assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Any unspecified attributes are treated as Major. Acceptance numbers derived from sampling plans must be reduced by one-third if equal to or greater than three, with a zero-defect acceptance standard unless otherwise stated. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or specific chemical reagents, with portable mercury-containing devices requiring shock protection and secondary containment per NAVSEA 5100-003D. The contract specifies no set-aside type, with the NAICS code 332994, and the point of contact for inquiries is Keanna Banks at DLA. The original required delivery date is April 23, 2026, and the contract is open for response until May 8, 2026.

General Info

Procurement of Plate, Clamp, Strap for USS Winston S. Churchill; 20-day delivery, strict MIL-STD compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

UNIT 100317 BOX 1, FPO, AE, 09591, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-305F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 30

Solicitation

Response DeadlineMay 8

Deadline has passed

Submission Closed

05/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressUSA

Contacts

Keanna Banks

contact@example.gov

+1 (555) 000-0000

Full Description

PLATE,CLAMP,STRAP
PLATE,CLAMP,STRAP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IF THE APPLICABLE DRAWING (OEM OR MILITARY)<(>,<)>
SPECIFICATION, STANDARD OR QUALITY ASSURANCE
PROVISION SPECIFIES AN ACCEPTANCE QUALITY LEVEL
(AQL), THE SAMPLING ACCEPTANCE NUMBER SHALL BE
REDUCED BY ONE-THIRD WHERE THE ACCEPTANCE NUMBER
IS EQUAL TO OR GREATER THAN THREE (3). FOR
EXAMPLE, IF THE ACCEPTANCE NUMBER IS 3, THE NEW
ACCEPTANCE NUMBER IS NOW 2. IF THE ACCEPTANCE
NUMBER IS NOW 2, IT SHALL BE REDUCED TO 1. A
SAMPLING ACCEPTANCE NUMBER OF 1 REMAINS THE
SAME.
NOTE: EVEN THOUGH THE ACCEPTANCE NUMBER IS
REDUCED, THE ORIGINAL SAMPLE SIZE REMAINS
SAME.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
WHELAN MACHINE & TOOL, LLC 0MB07 P/N 5188351
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A7-26-T-305F
SECTION B
PR: 7016529475 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016529475 0001 EA 1.000
NSN/MATERIAL:5342011887789
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
N21955
USS WINSTON S CHURCHILL DDG 81
UNIT 100317 BOX 1
FPO AE 09591
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N21955
USS WINSTON S CHURCHILL DDG 81
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2195553191187
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
SPE4A7-26-T-305F
SECTION B
PR: 7016529475 PRLI: 0001 CONT’D
DIC: A41 DIST: V9B ADV: BK FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:04/23/2026
SPE4A7-26-T-305F NSN/Part Number: 5342-01-188-7789 Quantity: 1 EA Purchase Request: 7016529475QTY: 1 Delivery: 20 days ADO