Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pneumatic Tire Supply for Government Vehicles

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of two units of pneumatic tires with NSN/Part number 2610001020968, specifically designated for use in government vehicles. The tires must meet all applicable federal packaging and labeling standards to ensure compliance with government procurement regulations. This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency, a subordinate agency of the Department of Defense. The solicitation was posted on August 5, 2026, and is tied to the primary contract identifier SPE7LX19D0029 with the delivery order SPE7LX26F89F8. The North American Industry Classification System code 326291 indicates the product falls under Other Rubber Product Manufacturing. The place of performance and point of contact details are not specified, and no set-aside classification or organization type is indicated, suggesting this is a standard commercial subcontract without special bidding preferences. The contract is accessible via the DIBBS system for official record review.

General Info

Supply of two pneumatic tires NSN 2610001020968 for government vehicles under DLA subcontract SPE7LX26F89F8.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

326291 - Rubber Product Manufacturing for Mechanical Use

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26F89F8.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIRE, PNEUMATIC, VEHICULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 5

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 2 units of pneumatic tires (NSN/Part 2610001020968) for government vehicles, compliant with federal packaging and labeling standards.

Similar Contracts

Same NAICS industry code

High-Performance Elastomeric O-Ring SupplierThis subcontract involves the supply of 2,868 high-performance elastomeric O-rings to support prime contractors for the DLA Weapons Support Land Supply Chain, specifically for Mark 46 and Mark 48 Torpedoes. The components must be manufactured according to MIL-DTL-117, Type II, Class C, Style 1 specifications, ensuring they are asbestos-free, Otto Fuel compatible, and maintain a surface finish consistent with ISO 3601-3, Grade CS. Packaging and labeling must adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The supplier is required to hold either SAE AS9003 or ISO 9001 certification and must maintain CMMC Level 2 compliance. Performance for this contract is centered in Tracy, California, under NAICS code 326291. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-0479

Solicitation SPE7L3-27-T-0479 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 397 gaskets, identified by NSN 5330000800131. This critical application item is classified as a commercial item under NAICS 326291. The required delivery date is February 2, 2027, with a need ship date of November 8, 2026, and delivery terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to technical and quality requirements, specifically prohibiting the use of asbestos as defined in FED-STD-313. Packaging must comply with MIL-STD-2073-1E and RP001, requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Marking must follow MIL-STD-129. All quotes must be submitted via the DIBBS system, and the successful contractor will be required to use the Wide Area WorkFlow system for invoicing and payment requests.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

in about 8 hours

Supply of Bowl O-Ring Seal (NSN 1730-01-581-7460)This subcontract involves the procurement of a Bowl O-Ring Seal, specifically genuine or approved equivalent Parker-Hannifin part number RK21156, to support prime contractors on DLA Troop Support supply contracts. The selected provider must ensure strict adherence to shelf-life management under marking code 33 and follow MIL-STD-129 and MIL-STD-2073-1E standards for all packaging and marking requirements. Additionally, the contract mandates full compliance with the Buy American Act. The scope of work requires the delivery of one packaged and marked seal, shipped FOB Origin to Greenville, Kentucky. This effort is managed under NAICS code 326291 for the Department of Defense, with a response deadline set for November 2, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Pitman Shaft Seals (NSN 5330-01-096-9650)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires the manufacture or sourcing of 698 Pitman Shaft Seals meeting NSN 5330-01-096-9650 specifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 326291, with performance taking place in New Cumberland. Strict adherence to military standards is required for the fulfillment of this order. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117, Type II, Class C, Style 1. Additionally, all deliverables must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging protocols.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of Encased Plain Seals (NSN 5330-00-966-6614)This subcontract involves the manufacturing of 577 encased plain seals under NSN 5330-00-966-6614 for the DLA Weapons Support Land Supplier Operations. The contractor is responsible for fabricating the seals in accordance with the DLA Master List of Technical and Quality Requirements, ensuring that all products are free of asbestos and mercury. Performance must align with the Berry Amendment and the Buy American Act, and the contractor must adhere to DFARS cybersecurity standards. The project requires OEM source approval through Curtiss-Wright Corp to ensure technical compliance. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 326291. The final deliverable consists of 577 finished seals meeting all specified Department of Defense quality and regulatory mandates.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Rubber Strip Supplier (NSN 9320016141487)This subcontract involves the manufacture or sourcing of rubber strips under NSN 9320016141487 to support prime contractors fulfilling Department of Defense supply contracts for the DDSP New Cumberland Facility. The selected supplier is responsible for ensuring all items meet strict technical specifications and are delivered by the required date to the place of performance in New Cumberland, Pennsylvania. A critical requirement of the contract is adherence to DLA packaging standards, which mandate the use of non-plastic wrapping, cushioning, and dunnage materials. This opportunity falls under NAICS code 326291, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-27-T-1167

Solicitation SPE7L3-27-T-1167 is a fixed-price federal procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 577 encased plain seals, identified by NSN 5330-00-966-6614. The contract requires delivery within 168 days, with an original required delivery date of February 6, 2027, and a need ship date of April 20, 2027. Delivery is FOB Origin under the First Destination Transportation program, with the final destination located in New Cumberland, Pennsylvania. This is not a small business set-aside, and the NAICS code for the procurement is 326291. The procurement is subject to strict technical and quality standards, including DLA packaging requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001. Source control is managed by Curtiss-Wright Corp, with Chicago Rawhide Mfg Co listed as an approved source; other offerors must obtain OEM source approval. The contract prohibits the use of asbestos and the intentional addition of mercury. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 2, 2026, and must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0339

Solicitation SPE8E6-27-T-0339 is a federal procurement issued by the Defense Logistics Agency for the supply of rubber strips under NSN 9320-01-614-1487. The requirement is for six units to be delivered to the DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is July 25, 2026, with a need ship date of September 15, 2026, and a delivery window of 62 days after award. This is not a small business set-aside, and the procurement falls under NAICS code 326291. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and requires CMMC Level 2 certification. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring that rubber sheets be separated by non-adhering materials and that plastics be avoided for wrapping or cushioning. Marking must follow MIL-STD-129R(3) with Special Marking Code 32 for shelf life. Inspection and acceptance will occur at the destination per FAR 52.246-1, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Payment and invoicing must be processed through the Wide Area WorkFlow system. Key regulatory clauses include DFARS 252.225-7001 for the Buy American and Balance of Payments Program and FAR 52.219-14 regarding limitations on subcontracting. All quotes must be submitted via the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7LX-27-U-0325

Solicitation SPE7LX-27-U-0325 is a request for a unilateral Indefinite Delivery Contract (IDC) issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of plain encased seals, identified by NSN 5330-01-079-4718. The contract has an estimated annual quantity of 80 units, with a guaranteed minimum of 12 units and a minimum delivery order quantity of 20 units. The maximum contract value is set at 350,000 dollars. Delivery is required within 52 days after the order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and requires compliance with several technical and regulatory standards, including CMMC Level 2 Self-Assessment, the Berry Amendment, and the Buy American Act. Items must meet source-controlled drawing requirements and be packaged according to MIL-STD-2073-1E and MIL-STD-129, specifically requiring opaque, waterproof, and greaseproof bags to prevent UV deterioration. Hazardous materials must be labeled per the Hazard Communication Standard and accompanied by Safety Data Sheets. Invoicing and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturer of Plain Encased Seals (NSN 5330-01-115-9720)This subcontract opportunity is for the manufacture of 44 plain encased seals under NSN 5330-01-115-9720 to support the DLA Weapons Support Strategic Acquisition Program Directorate. The selected provider must fabricate these seals to exact government specifications using 100% asbestos-free raw materials while adhering to strict DLA technical quality standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 326291. To be eligible, contractors must maintain CMMC Level 2 cybersecurity compliance. The response deadline for this requirement is November 4, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7LX-27-U-0266

Solicitation SPE7LX-27-U-0266 is a total small business set-aside for the procurement of plain encased seals, identified by NSN 5330-01-115-9720. Issued by the DLA Weapons Support Strategic Acquisition Program Directorate, this request may result in a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000 dollars. The estimated annual quantity is 44 units, with a guaranteed minimum of 6 units and a minimum delivery order quantity of 11 units. Delivery is required within 109 days after the order is placed, with shipping terms set as FOB Destination within the continental United States. The contract mandates strict adherence to technical and quality standards, including the prohibition of asbestos and the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 for items susceptible to ultraviolet rays. Marking and packaging must comply with MIL-STD-129 and MIL-STD-130N, while hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with CMMC Level 2 cybersecurity standards. Award will be granted to the responsible offeror based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Seal Assembly Manufacturer/Supplier (NSN 5330011802636)This subcontract involves the manufacture and supply of Seal Assemblies under NSN 5330011802636 for prime contractors supporting the Defense Logistics Agency. The selected supplier is responsible for sourcing or producing the assemblies using rubber or elastomer materials in strict accordance with technical specifications. All deliverables must be palletized per RP001 and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The contract is managed by the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support office, with the place of performance located at Hill AFB. Interested parties must submit responses by October 30, 2026. The procurement falls under NAICS code 326291, focusing on the delivery of physical, packaged, and marked seal assemblies.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Structural Channels (NSN 9540-01-474-4371)

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

Polyurethane Coating Supply (NSN 8010014770574)

Paint and Coating Manufacturing

POSTED

about 16 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0191

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0148

Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.

Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0187

Solicitation SPE8ES-27-T-0187, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of six kits of light gray polyurethane coating, identified by NSN 8010014770574. Each kit consists of a gallon can containing 2100g of polyurethane, a 144g bottle of curing agent, and a stir stick. The items are subject to a non-extendable shelf life of 12 months and must be delivered to Borcea Air Base, Romania, with an original required delivery date of October 26, 2026. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32 for shelf-life items. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of certain telecommunications equipment.

Paint and Coating Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0303

Saw Blade and Handtool Manufacturing

POSTED

about 16 hours ago

DEADLINE

ELBOW, HOSE, FIRE FIG

Solicitation # SPE8E6-27-T-0374

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

STEP ASSEMBLY, GRIP

Solicitation # SPE8E6-27-T-0294

Solicitation SPE8E6-27-T-0294 is a request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Step Assembly, Grip, identified by NSN 4210015694605 and Pierce Manufacturing Inc part number 1348996. The requirement is categorized under NAICS code 326111. Delivery is required within 10 days of award, with an original required delivery date of May 6, 2026. The shipment is FOB Origin and will be delivered to the South Carolina Army National Guard in Eastover, South Carolina. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract incorporates numerous FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the prohibition of certain telecommunications equipment. Offerors must represent their size status and domestic origin of supplies, and the procurement is subject to destination inspection per FAR 52.246-1.

Plastics Bag and Pouch Manufacturing

POSTED

about 16 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0304

POSTED

about 16 hours ago

DEADLINE

EXTINGUISHER, FIRE

Solicitation # SPE8E6-27-T-0384

All Other Miscellaneous Textile Product Mills

POSTED

about 16 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE8E7-27-T-0129

Solicitation SPE8E7-27-T-0129 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one aircraft navigational light, identified by NSN 6220015760036 and part number 30-3055-1. The requirement is for a single unit with an original required delivery date of October 7, 2026, and a delivery lead time of 20 days after receipt of order. Delivery is FOB destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination at Kadena Air Base in Okinawa, Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and prohibitions on certain telecommunications equipment. Offerors must submit quotes via the DIBBS portal by October 26, 2026, and are encouraged to provide quantity ranges. Evaluation may include a HUBZone price preference, and the submission of a Safety Data Sheet is required for hazardous materials to avoid being deemed non-responsible for award.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0380

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Pneumatic Vehicular Tire Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Pneumatic Vehicular Tires

Defense Logistics Agency

POSTED

DEADLINE

RUBBER SHEET, SOLID

Solicitation # SPE8E9-26-T-3122

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-143J

Defense Logistics Agency

POSTED

DEADLINE

HOUSING, VIBRATOR IS

Solicitation # SPE4A7-26-Q-0909

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

20--FINGER ASSY 47-51

Solicitation # SPE7M4-26-T-219K

Defense Logistics Agency

POSTED

DEADLINE

Supply of Pneumatic Tires (NSN 2610005289633)

Defense Logistics Agency

POSTED

DEADLINE

Pneumatic Tire Supply for Vehicle 1 (NSN 2610005289633)

Defense Logistics Agency

POSTED

DEADLINE

SEAL, NONMETALLIC SP

Solicitation # SPE7L3-26-T-120Q

Defense Logistics Agency

POSTED

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-26-T-146P

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

CLOSED

RUBBER SHEET, SOLID

Solicitation # SPE8E9-26-T-3270

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-806A

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS