Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Port Card

Closed
Z5031State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, STAN
Solicitation # SPE7M5-27-T-0997
Solicitation SPE7M5-27-T-0997, issued by the DLA Weapons Support Active Devices Division, is for the procurement of one standardized electronic module, identified by NSN 5963013531602 and Key Code CZJ. The requirement specifies a delivery timeline of 20 days with a required delivery date of October 13, 2026, shipped FOB Destination to the USS SEAWOLF SSN 21. The procurement is subject to strict quality and environmental standards, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and acceptance is based on zero non-conformances using sampling methods per MIL-STD-1916 or ASQ H1331. Critical technical requirements include mandatory DOD qualified Electrostatic Discharge and Electromagnetic Interference protective packaging per MIL-PRF-81705, with specific barrier materials from QPL-81705 manufacturers to prevent damage to leads and terminals. Marking must adhere to MIL-STD-129 with special marking code 39 for ESD sensitivity. Administratively, the contract requires CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for invoicing. Quotations are due by October 26, 2026, and must be submitted to the issuing office in Columbus, Ohio.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
NAICS: 334418
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-27-T-1560
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
MATRIX ASSEMBLY, FLIGHT
Solicitation # SPE7M5-27-T-1580
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE4A5-26-T-466Y
Solicitation SPE4A5-26-T-466Y is a request for quotations from the DLA Aviation ASC Supplier Oper OEM Division for the procurement of 21 circuit card assemblies, identified by NSN 5998014807484 and Rosemount Aerospace part number 00704-0778-0001. The requirement is for a critical application item with a delivery window of 259 days after order, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The procurement is subject to the Buy American and Balance of Payments Program and requires compliance with the CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements for procurement, specifically utilizing preservation method 41 and unit containers E5. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award functionality and includes a price evaluation preference for HUBZone concerns. Invoicing and payment are to be processed through the Wide Area WorkFlow system.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
NAICS: 334418
New
DIBBS
CORE ASSY
Solicitation # SPE7M0-27-T-0767
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M5-27-T-1602
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE4A5-27-T-2003
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
NAICS: 334418
New
DIBBS
ELECTRONIC COMPONENTS
Solicitation # SPE7M1-27-T-1006
Solicitation SPE7M1-27-T-1006, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 20 units of an electronic components assembly, identified as a critical application item under NSN 5998-01-484-2619 and part number 12422551-002. The procurement requires strict adherence to Technical Data Package Rev B Gen 2 and specific basic and reference drawings. Delivery is required within 168 days after order, with FOB Destination terms. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification to access export-controlled technical data subject to ITAR or EAR regulations. The contract mandates rigorous quality and safety standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special provisions for protected cargo and hazardous materials. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS cybersecurity standards, including safeguarding covered defense information.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 2 days
NAICS: 334418
New
Federal
Supply of Replacement Parts for Pneumatic Accumulators
Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 334418
New
Federal
Pneumatic Accumulator Teardown and Repair Services
Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 334418
New
Federal
Circuit Card Assembly (NSN 5998-01-728-8235) SupplierThis subcontract involves the manufacture or procurement of five Circuit Card Assemblies matching NSN 5998-01-728-8235 for prime contractors supporting DLA supply contracts. The supplier must ensure all assemblies are provided with Unique Item Identifiers and adhere to MIL-STD-2073 packaging standards. Final delivery requires the submission of Material Inspection and Receiving Reports. To qualify, the supplier must hold ISO 9001 or SAE AS9100 certification and maintain strict compliance with DFARS 252.209-7010 regarding Critical Safety Items. The opportunity is managed under NAICS code 334418 for the Department of Defense via the Pa DLA Aviation At Philadelphia agency, with a response deadline of November 6, 2026.
Pa DLA Aviation At Philadelphia

POSTED

about 20 hours ago

DEADLINE

in 10 days
NAICS: 334418
New
Federal
Supply of Rotary Pumps (NSN 4320-01-328-9050)
Pa DLA Aviation At Philadelphia

POSTED

about 20 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids for an Orion standard RS-232 port card intended for use with a communications processor. The approved manufacturer and part number for this equipment is Novatech 5RSPARE-A. This solicitation, identified by number Z5031, was posted on August 20, 2026, with a response deadline of August 28, 2026. The procurement is managed by Tiffany Caruthers in Nashville, Tennessee, and interested parties can submit responses through the official vendor portal.

General Info

Nashville Electric Service seeks bids for Novatech 5RSPARE-A port cards by August 28.

Agency

Tennessee → Nashville Electric Service

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

Z5031 RFB - Orion Standard RS-232 Port Card

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ORION STANDARD RS-232 PORT CARD STANDARD RS-232 PORT CARD FOR COMMUNICAT IONS PROCESSOR. Approved Manufacturers and/or Part Numbers: NOVATECH5RSPARE-A

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334418
Closed
SLED
Ateme Board for TITAN (PCIe Encoder/Decoder Card)
Etc100000 Broadcast Educational Media Co Etech

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 334418
Closed
SLED
Supply of Hail-Resistant Photovoltaic Modules
City of Madison

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 334418
Closed
SLED
Electrical Conduit and Hardware Supply
Dept for Natural Resources

POSTED

2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 334418
Closed
SLED
Control Unit Development and Integration
Texas A&M University

POSTED

2 months ago

CLOSED

2 months ago
View Details
NAICS: 334418
SLED
Strong Base Ion Exchange System Manufacturer/Supplier
State Water Resources Control Board

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334418
Closed
SLED
Supply of Male N-Type Coaxial Connectors for 7/8" Foil Coax
Nashville Electric Service

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334418
Closed
SLED
Supply of Female N-Type Coaxial Connectors for 7/8" Foil Coax
Nashville Electric Service

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334418
Closed
SLED
Stop-Arm Violation Detection Camera Systems
Dekalb County School District

POSTED

3 months ago

CLOSED

about 2 months ago
View Details
NAICS: 334418
Closed
SLED
Supply of Ruggedized Electronic Components and Sensors
Texas Department Of Transportation

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334418
Closed
SLED
Supply of RoHS-Compliant Electronic Components
Texas Department Of Transportation

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334418
Closed
SLED
Telescopic Gym Seating System
Parks and Recreation

POSTED

3 months ago

CLOSED

about 2 months ago
View Details
NAICS: 334418
Closed
SLED
Electrical and ABS Wiring Integration
Texas Department Of Transportation

POSTED

3 months ago

CLOSED

2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS