This Government Contract opportunity from Government of Canada was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Portable Fluid Analysis System Supply

Closed

Canada

Submission Closed06/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Canada

PPLN Waveguide Mixer Design and FabricationThe contract requires the design, fabrication, and testing of a custom 2×1 periodically poled lithium niobate waveguide mixer intended for use as an optical parametric amplifier in quantum photonic systems. The device must operate with a 780 nm pump wavelength and a 1560 nm signal wavelength, delivering a minimum output power of 4 milliwatts and achieving at least 3.5 decibels of squeezed light performance, critical for quantum noise reduction applications. The waveguide structure must be precisely engineered to enable efficient nonlinear interactions and maintain stability under operational conditions, with all phases of development—from simulation and prototyping to rigorous optical testing—expected to meet exacting technical specifications. The work is issued as a subcontract under the National Research Council of Canada, part of the Government of Canada, and is focused on the National Capital Region for performance. The solicitation was posted on June 26, 2026, with responses due by July 12, 2026, and falls under NAICS code 334516, indicating classification within the manufacturing of optical instruments and lenses. While no set-aside provisions or point of contact details are specified, the urgency and precision required suggest a highly specialized technical effort, likely targeting vendors with prior experience in nonlinear optical materials, chip-scale photonics, and quantum light source development. All deliverables must be fully documented and validated to ensure readiness for integration into advanced quantum photonic platforms.

National Research Council of Canada

POSTED

DEADLINE

Combustion AnalyzerThe Government of Canada, through Agriculture and Agri-Food Canada, is seeking to procure one Combustion Analyzer for the Summerland Research and Development Center in British Columbia under solicitation number WSC-2627-062. This procurement is restricted exclusively to suppliers who are already pre-qualified under Supply Arrangement E60PV-19EQUI for Laboratory and Scientific Equipment, Parts and Accessories, Services and Supplies, issued by Public Works and Government Services Canada. Only invited suppliers holding this arrangement may submit bids; any submissions from non-pre-qualified suppliers will not be considered. The selection process is based on mandatory technical criteria and the lowest aggregate price, ensuring compliance with competitive procurement standards aligned with Canada’s international trade agreements including those with Korea, Chile, Colombia, Panama, and Honduras. The notice was posted on June 26, 2026, and responses are due by August 5, 2026, with the opportunity open for 40 calendar days on the Government Electronic Tendering Service. All bids must meet the specified technical requirements, and the supplier achieving the lowest price while fully satisfying these criteria will be recommended for award. Contract authority is Camille Sobczak, who can be reached at 204-430-5426 or camille.sobczak@agr.gc.ca. Suppliers not currently on the arrangement may apply at any time by accessing solicitation document E60PV-19EQUI/D via CanadaBuys.

Department of Agriculture and Agri-Food

POSTED

DEADLINE

Au Sputtering Target for Release Layer DevelopmentNASA/NSSC is proceeding with a sole source contract to Angstrom Sciences Inc. for the acquisition of gold sputtering targets specifically developed for release layer applications, determining that this vendor is the only capable supplier for this specialized component. The procurement will be conducted under FAR Part 12 as a commercial item acquisition, with performance taking place at NASA’s Marshall Space Flight Center, and the NAICS code 334516 applies to this effort. Interested parties may submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on June 30, 2026, solely to assist the government in evaluating whether competition is feasible, though any decision not to compete remains at the government’s sole discretion. Oral responses are not permitted, and the NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies with contact information available through the official NASA procurement website. The contracting officer is Cody Guidry, and all correspondence must be directed to his NASA email address.

NASA Shared Services Center

POSTED

DEADLINE

Verdi G5 OPSLaser-Diode SystemThe Naval Research Laboratory intends to award a sole source purchase order to Coherent NA, Inc. for the Verdi G5 OPSLaser-Diode System, citing unusual and compelling urgency as the justification for bypassing competitive procedures. This procurement is being conducted under Simplified Acquisition Procedures in accordance with FAR Part 13.106-1(b), with a value not exceeding the $350,000 threshold, and falls under NAICS code 334516 with a size standard of 1000 employees and FSC/PSC 6640. The requirement is exclusively for this specific laser system, as no other supplier or alternative product is deemed capable of meeting the agency’s needs. Public interest in competing for this contract may be expressed by the specified deadline, but responses must provide clear and convincing evidence that competition would benefit the government; failure to do so will result in no change to the planned sole source award. All correspondence must reference the Notice of Intent number and no costs incurred in submitting information will be reimbursed. The procurement is managed under the Department of Defense with point of contact Teigh Cheyney at the Naval Research Laboratory in Washington, D.C.

Naval Research Laboratory

POSTED

DEADLINE

Allen-Bradley Key Switches E1 ControlsThis solicitation is a brand-name mandatory procurement for 25 specific Allen-Bradley Key Switch E1 Controls parts, with two units required for each of the listed item numbers ranging from 800TC-H31BF to 800TC-H3126BF, totaling 50 individual components. The procurement is exclusively for authorized resellers of Allen-Bradley products, and only new, unused, factory-certified hardware is acceptable—no substitutions, refurbished parts, or deviations from the specified part numbers are permitted. The items must be packaged, handled, and shipped strictly in accordance with manufacturer recommendations and must comply with NASA’s receiving requirements, including all necessary shipment documentation. Delivery is required FOB Destination to Building 4010 at NASA Stennis Space Center, Mississippi, 39529. Vendors must provide their CAGE/UEI code, specify FOB Destination, include lead time for delivery, and submit the full name and email of the point of contact as mandatory administrative requirements. The quotation must be submitted via email with the solicitation number 80NSSC26934871Q-1 clearly referenced in the subject line; failure to do so will render the response non-responsive. The government does not accept payment by credit card, and award will be determined based on strict compliance with all technical, vendor qualification, and administrative criteria, with no evaluation weighting provided beyond pass/fail gates for compliance. The procurement falls under NAICS code 334516 and is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration.

NASA Shared Services Center

POSTED

3 days ago

DEADLINE

in about 21 hours

AI Contract Overview

The contract entails the supply of a portable fluid analysis system designed for on-site oil analysis to monitor equipment health and fluid condition, with strict adherence to technical specifications ensuring accurate and reliable performance in field operations. The system must meet required standards for real-time diagnostics, enabling timely maintenance decisions and minimizing downtime for critical assets. The place of performance is specified as Cape Breton, indicating the equipment will be deployed in that region, likely supporting defense or operational infrastructure there. This is a subcontract issued by the Department of National Defence under the Government of Canada, with a NAICS code of 334516, indicating classification within the instrumentation and related manufacturing sector. The solicitation was posted on May 13, 2026, with a response deadline of June 22, 2026, allowing interested vendors a window to submit proposals. While no set-aside details are provided, the contract is intended to support national defense objectives through advanced, field-deployable diagnostic technology.

General Info

Supply portable fluid analysis system for oil monitoring, compliant with technical specs, Cape Breton.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334516 - Analytical Laboratory Instrument Manufacturing View NAICS

Place of Performance

Cape Breton, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 13

subcontract

Response DeadlineJun 22

Deadline has passed

Submission Closed

06/22/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of a portable fluid analysis system for on-site oil analysis, including compliance with technical specifications for equipment health and fluid condition monitoring.