Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Post-Installation Testing and Calibration

Active

Federal

Response Deadline09/21/2026, 07:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive performance testing, calibration, and verification of jig grinder accuracy following installation, with specific focus on alignment checks and validation of dimensional tolerances to ensure operational precision. This work is critical to maintaining the high standards required for aerospace and defense manufacturing applications, where even minor deviations can impact component integrity and system performance. All testing procedures must adhere to established industry and military specifications to guarantee the equipment meets functional requirements under actual operating conditions. The subcontract is issued under NAICS code 541330 for engineering services and is managed by the Defense Logistics Agency Aviation, a division of the Department of Defense. Performance must occur at Cherry Point, North Carolina, with a response deadline of September 21, 2026. The contract does not specify a solicitation number or set-aside status, and no point of contact information is provided. Bidders are expected to demonstrate technical expertise in precision machinery calibration and proven experience with similar defense-related equipment testing protocols.

General Info

Performance testing and calibration of jig grinder at Cherry Point to meet defense aerospace precision standards by September 21, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Cherry Point, NC, 28533, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 07:00:00 AM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performance testing, calibration, and verification of jig grinder accuracy, including alignment checks and tolerance validation.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, focusing on professional engineering and environmental services such as surveying, geotechnical analysis, permitting, public outreach, and utility location. The project seeks participation from certified Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible small business groups, including those certified under SBA programs like SDB, WOSB, VOSB, and SDVOSB, with a specific emphasis on DBE status under the Department of Transportation. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with full proposals due by September 15, 2026. The work falls under NAICS code 541330 and other related codes, and performance will occur within California.

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, a municipal groundwater well initiative in California to replace and decommission the existing Corydon well. The project is divided into two phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and abandonment, and full-time on-site construction management oversight compliant with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well. Key technical specifications require a 24-inch stainless steel Ful-Flo louvered screen matching the existing casing depth, vertical turbine pump equipment, and discharge piping tied to the Corydon Blend station and Malaga blending location, all in accordance with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Proposals must include a Preliminary Design Report with up to 30% design effort, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and record drawing development along with commissioning and operator training support. The solicitation is structured as a Request for Proposals with evaluation weighted toward demonstrated competence and professional qualifications, where relevant experience and team qualifications account for 25%, understanding of project scope and approach for another 25%, scope and schedule feasibility for 20%, innovation for 10%, cost value for 10%, and overall proposal quality for 10%. Cost is not the sole determinant; the highest-ranked firm will be negotiated with for a mutually agreeable scope and fee, with a not-to-exceed dollar limit expected. Respondents must submit all required certifications and forms through Attachment “2”, including American Iron and Steel Certification, Debarment and Suspension Certification, System for Award Management (SAM) Information, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Registration, and Executive Order N-6-22 Certification for Russia sanctions compliance. Subcontractors must be identified and their DBE status documented, along with explanations if not selected. The proposal must conform to Build America Buy America Act requirements, including sourcing documentation and waiver procedures for non-compliant materials, and adhere to telecommunications restrictions under Section 889, prohibiting Huawei and ZTE equipment. Proposals must be submitted via the PlanetBids

Ardurra Group, Inc.

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a water infrastructure upgrade in Lake Elsinore, California. The contract, identified as C2305, involves comprehensive engineering expertise to ensure the replacement of the existing well system meets regulatory, operational, and safety standards. Services include planning, technical design, preparation of bid documents, and ongoing field support throughout construction to maintain project integrity and adherence to specifications. The solicitation is open to Disadvantaged Business Enterprises under Department of Transportation guidelines, with NAICS code 541330 for architectural and engineering services. Proposals are due by September 1, 2026, and the primary point of contact for inquiries is Katie Neubauer of AKM Consulting Engineers, reachable via phone or email. The project is positioned to enhance local water supply reliability and is part of broader infrastructure improvement efforts in Riverside County.

AKM Consulting Engineers

POSTED

about 5 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design, construction support, and comprehensive engineering services required to replace the existing Corydon groundwater production well with a new facility while permanently abandoning the old well in full compliance with California State Water Resources Control Board and Riverside County regulations. The scope includes hydrogeological evaluation, aquifer analysis, municipal well design, borehole geophysical logging, site civil and structural engineering, utility coordination, environmental permitting, water quality sampling, and full-time construction management during the drilling phase, followed by engineering oversight during the well equipping and commissioning phase. Technical specifications mandate a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth, with sanitary seal placement consistent with AWWA standards. The project is divided into two phases: Phase 1 focuses on technical specifications, civil design, line-bid items, bidding support, and on-site construction management, while Phase 2 covers architectural, mechanical, electrical, instrumentation, and controls design for final facility equipping. All work must adhere to the Build America, Buy America Act and 2 CFR Part 184, requiring domestic sourcing of iron, steel, and manufactured products, along with rigorous certification and documentation of origin. The project is funded by a $400,000 Bureau of Reclamation grant and non-Federal cost share, subjecting it to the full scope of federal compliance requirements including 2 CFR Part 200, Davis-Bacon, Clean Air Act, and Federal Water Pollution Control Act provisions, which must be flowed down to subconsultants exceeding $150,000. Proposals must include detailed cost breakdowns by task, hourly rates, travel expenses, and a not-to-exceed total fee capped at $1,000,000, submitted via the PlanetBids portal by September 1, 2026, with mandatory certifications for debarment status, SAM registration, executive order N-6-22 compliance, lobbying restrictions, insurance, conflict of interest, and DBE subcontractor participation. Evaluation prioritizes demonstrated qualifications and project experience (25%), technical understanding and approach (25%), schedule and scope clarity (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with award based on competence rather than lowest price. Successful contractors must maintain accurate records for four years post-final payment, submit monthly itemized invoices with progress reports, and adhere to a project timeline running from November

GEI Consultants, Inc.

POSTED

about 5 hours ago

DEADLINE

RFP - Consulting Services - Lanyard Safety System

Solicitation # ER-PW-1-2026

The City of Moose Jaw is seeking qualified engineering consulting firms to deliver professional services related to the design and implementation of a Lanyard Safety System, through a formal Request for Proposal process identified as ER-PW-1-2026. Proposals must be submitted electronically to procurement@moosejaw.ca no later than August 25, 2026, at 2:00 p.m. Central Standard Time, with all necessary documentation available on the city’s website at www.moosejaw.ca/tenders and through the Saskatchewan Public Sector tendering portal. The engagement requires technical expertise in safety system engineering, with proposals expected to demonstrate capability, experience, and compliance with municipal standards and practices. All submissions must align with the requirements outlined in the solicitation materials, which include technical specifications, deliverables, timelines, and evaluation criteria. The contract is intended for work to be performed within Saskatchewan, and inquiries should be directed to the primary point of contact, CMJProcurement, at the provided email. The solicitation is open to all qualified firms with no set-aside limitations, and responses must be received by the stated deadline to be considered. Late or incomplete submissions will not be accepted.

City of Moose Jaw

POSTED

about 5 hours ago

DEADLINE

Engineering Services - Airport and Aviation Planning Services

Solicitation # RFP2700030

Chesterfield County in Virginia is soliciting engineering services focused on airport and aviation planning under solicitation number 41-144650. The opportunity, posted on August 6, 2026, requires proposals to be submitted by September 10, 2026, and is open to entities capable of providing professional planning and engineering support related to airport infrastructure and aviation systems. The work will be performed in Chesterfield, Virginia, with a zip code of 23832, and the primary point of contact for inquiries is Vin Kamatchi, reachable via email at kamatchiv@chesterfield.gov or by phone at 804-717-6342. This solicitation is categorized under state, local, or educational government procurement and does not specify a set-aside classification or NAICS code, indicating it is open to all qualified respondents without preferential treatment based on business size or ownership type. All submissions must be made through the designated online portal linked in the solicitation details.

Chesterfield County

POSTED

about 5 hours ago

DEADLINE

in about 1 month

RFP for Engineering designs for 2 culverts

Solicitation # 75031

The Town of Wolcott is soliciting engineering bids for the design of two culvert replacements: Culvert ID 5-25 on Marsh Road and Culvert ID 9-6 on Town Hill Road in Wolcott, Vermont, with funding provided by FEMA. Bidders must submit separate, itemized proposals for each culvert, including all fees and timelines associated with obtaining necessary permits. Design work must comply with Vermont stream alteration standards and U.S. Army Corps of Engineers permitting requirements, building upon hydrologic studies previously completed by VTrans. A voluntary pre-bid site inspection is scheduled for August 13th, 2026, beginning at 8:30 a.m. at Culvert 5-25, located 0.27 miles southeast of 454 Marsh Road, followed by a second stop at Culvert 9-6 between 916 and 976 Town Hill Road at approximately 9:10 a.m. All bid submissions must be received by 2 p.m. EDT on August 28th, 2026, via email, mail to PO Box 100, Wolcott, VT 05680, or hand delivery to 28 Railroad Street. Bids will be opened publicly on August 31st, 2026, at 10 a.m. The Town retains full discretion to accept or reject any or all bids without explanation. Additional information, including the state hydrologic studies and this request for proposal, is available online at www.wolcottvt.org or by contacting Michelle at 802-888-2746.

Department of Economic Development

POSTED

about 7 hours ago

DEADLINE

Part-Time Construction InspectionA part-time construction inspection role is available for a two-month project under Public Works in Connecticut, requiring periodic field inspections to ensure adherence to approved plans during excavation, formwork, and accessibility compliance with ADA standards. The position is classified as a subcontract under NAICS code 541330, with a response deadline of August 27, 2026, and was posted on August 6, 2026. The inspections must be conducted with precision to confirm that all construction activities meet regulatory and design requirements, focusing specifically on structural and safety elements during the critical construction phase. The place of performance and contact details are not specified, but the work is tied to a project managed through the Berlin, Connecticut public works jurisdiction, accessible via the provided online portal.

POSTED

about 8 hours ago

DEADLINE

Construction Administration & Contract ManagementThe contract involves providing comprehensive construction phase oversight for a public works project in Connecticut, focusing on ensuring contractor compliance through detailed administrative and managerial support. Key responsibilities include reviewing submittals, responding to requests for information, preparing change orders, and evaluating payment requisitions to maintain alignment with project specifications and contractual obligations. The work requires consistent coordination to verify that all construction activities adhere to the approved plans, timelines, and quality standards, with an emphasis on documentation and procedural accuracy throughout the construction lifecycle. This is a subcontract under NAICS code 541330, classified as a professional service engagement for contract administration. The opportunity was posted on August 6, 2026, with a response deadline of August 27, 2026, and is managed by the Connecticut Public Works agency. While specific location details are not provided, the place of performance is situated within Connecticut, and interested parties must submit proposals through the designated public procurement portal. The engagement demands technical expertise in construction management and a thorough understanding of contractual obligations to support effective project delivery.

POSTED

about 8 hours ago

DEADLINE

Civil Engineering Design & SurveyingThe contract requires comprehensive civil engineering services including topographic surveying and site investigation to support the design and construction of new sidewalk segments with ADA-compliant curb ramps. The scope encompasses detailed drainage analysis to ensure proper water management and utility coordination to avoid conflicts with existing infrastructure. All work must adhere to accessibility standards and integrate seamlessly with surrounding urban features. The project is classified under NAICS code 541330 for architectural and engineering services and is structured as a subcontract under the Public Works agency of Connecticut. The solicitation was posted on August 6, 2026, with a firm deadline for responses on August 27, 2026, at 2:00 PM. Performance location and specific agency office details are not provided in the data, but the work is expected to occur within Connecticut.

POSTED

about 8 hours ago

DEADLINE

Construction Phase Engineering SupportThis contract offers optional construction-phase engineering support services focused on ensuring alignment between construction activities and design documentation. The scope includes reviewing shop drawings, responding to requests for information, conducting site visits, and certifying that construction meets project specifications. These services are intended to support quality control and adherence to design intent during the build phase without being mandatory. The contract is classified as a subcontract under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. It is issued under the Finance agency, specifically through the Florida office, with a response deadline of September 9, 2026, and a posting date of August 6, 2026. The place of performance and contact details are not specified, and the procurement is available through an online portal for interested parties to review and submit proposals.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Mechanical & Pumping Systems EngineeringThe contract seeks engineering services to design and specify submersible pump replacements featuring watertight seals, with a focus on performance validation under high-water conditions. The work requires thorough evaluation of pump efficiency, durability, and operational reliability in flood-prone environments, ensuring seamless integration with elevated infrastructure systems. Compliance with established flood resilience standards is mandatory, and all solutions must be engineered to withstand prolonged submersion and dynamic water pressure without compromise to integrity or function. The project falls under the NAICS code 541330 for Mechanical & Pumping Systems Engineering and is classified as a subcontract with a response deadline of September 9, 2026. The solicitation is issued under Florida’s Finance agency, with no specified city or address for performance, indicating potential statewide applicability. The scope emphasizes technical precision, environmental adaptability, and long-term infrastructure resilience, targeting contractors with proven expertise in hydraulic systems and disaster-resistant mechanical design.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Technical Data Package (TDP) Development and SubmissionThe contract involves the development and submission of a complete technical data package in accordance with DLA-WS-VIBB 26-20-1001, encompassing all required manuals, schematics, and maintenance documentation necessary for full technical compliance. The work must be compiled and formatted to meet stringent military standards, ensuring accurate, organized, and submission-ready deliverables that support operational readiness and logistics support for defense systems. This is a subcontract opportunity under the NAICS code 541490, directed by DLA Aviation under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533. The solicitation was posted on August 6, 2026, and responses are due by September 21, 2026, with no set-aside designation specified.

Other Specialized Design Services

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Operator Training Program DeliveryThe contract outlines the delivery of an on-site training program for Department of Defense Defense Logistics Agency Aviation personnel focused on the safe operation, routine maintenance, and troubleshooting of high-precision jig grinders. The training is to be conducted at Cherry Point, North Carolina, with a specific emphasis on ensuring personnel achieve proficiency in handling precision machining equipment critical to defense manufacturing and repair operations. The program is classified as a subcontract under NAICS code 611430, indicating it falls under professional and management development training services, and is intended to enhance workforce competence through hands-on, location-specific instruction. The solicitation was posted on August 6, 2026, with a response deadline set for September 21, 2026, allowing potential vendors sufficient time to prepare and submit proposals detailing their methodology, instructor qualifications, training curriculum, equipment requirements, and safety protocols. While the contract does not specify a set-aside designation, it requires execution at the designated government facility where the equipment is in use, ensuring relevance and practical application. Training outcomes must meet operational readiness standards, and all instruction must align with federally mandated safety and technical guidelines for precision machinery use within defense logistics environments.

Professional and Management Development Training

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Installation, Rigging, and Unloading ServicesThe contract calls for the on-site delivery, unloading, rigging, and precision installation of two jig grinders at the DLA Aviation facility in Cherry Point, North Carolina, with a zip code of 28533. Services include comprehensive alignment, leveling, and seamless integration of the equipment to meet stringent operational standards, ensuring the machines are fully functional within the facility’s existing infrastructure. All work must be performed according to technical specifications governing industrial machinery installation, with an emphasis on accuracy and safety throughout the process. The contract is classified as a subcontract under NAICS code 238990, with a response deadline of September 21, 2026, and was posted on August 6, 2026. The performance location is at the Department of Defense's DLA Aviation site, and all activities must be completed in compliance with federal contracting requirements applicable to defense-related installations. The scope requires specialized expertise in heavy machinery handling and precision equipment setup, with no set-aside restrictions indicated. The contract does not include point of contact details, and further information is accessible through the provided SAM.gov link.

All Other Specialty Trade Contractors

POSTED

about 9 hours ago

DEADLINE

in about 2 months

High Precision Jig Grinder SupplyThe contract calls for the supply of two new, factory-certified high precision jig grinders that must fully comply with DLA Aviation’s technical specifications and accompanying data package requirements. These machines are critical for precision manufacturing and maintenance operations and must be delivered to the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533. The solicitation is classified as a subcontract under NAICS code 333242, indicating it pertains to the manufacture of machine tools, and is issued by the Department of Defense through DLA Aviation. All equipment must meet stringent certification standards to ensure reliability and performance in defense-related applications. The response deadline for submissions is set for September 21, 2026, at 7:00 a.m., with the opportunity posted on August 6, 2026. There is no specified set-aside designation, meaning this contract is open to all eligible subcontractors without preference-based restrictions. The contract does not list a designated point of contact, and no office address is provided beyond the place of performance. Interested parties must reference the SAM. gov link to access the complete solicitation package, ensuring full alignment with all technical, documentation, and delivery obligations before submission.

Semiconductor Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

HOSE ASSEMBLY, EMERGENCY LOCK / NSN 1620-01-116-2354 / C-5 AIRCRAFT

Solicitation # SPE4A726R0731

The Government is preparing to award a five-year Indefinite Quantity Contract for the HOSE ASSEMBLY, EMERGENCY LOCK, identified by NSN 1620-01-116-2354, with an estimated annual quantity of 40 units. The contract will be issued under FAR 6.302, limiting competition to a single approved source, Designed Metal Connections Inc. (CAGE 14798), due to the proprietary nature of part number 179-50074 and the lack of complete technical data within DLA Weapons Support - Richmond. No other qualified sources currently exist, and any contractor seeking to participate must first submit a Source Approval Request for review and approval by the assigned ESA. The item is classified as critical but not a Critical Safety Item, and export control regulations apply. Production units will be delivered FOB Destination with inspection and acceptance conducted at the origin. The estimated solicitation issue date is August 24, 2026, with proposals due by September 25, 2026, and contractors must be registered in SAM.gov to be eligible for award. The Government has determined that commercial item acquisition policies under Part 12 do not apply, but offerors may still indicate if their offering qualifies as a commercial item within 15 days of notice. The contract award will consider price, past performance, and other factors as outlined in the solicitation. All solicitation documents will be available exclusively through DIBBS in PDF format, with no paper copies provided. The contracting office is located in Richmond, Virginia, and points of contact are Christopher Rose and Jeremy Prince from DLA Aviation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months

BEARING,SLEEVE,LINE

Solicitation # SPE4A626Q1284

Solicitation SPE4A626Q1284 is a sources-sought notice issued by DLA Aviation under the Department of Defense to identify qualified suppliers for a sleeve bearing, NSN 3110-01-341-6408, with approved source KATO ENGINEERING INC. (CAGE 32770). The notice invites surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory to respond, requiring submission of a completed Surplus Certificate DLAD 52.211-9000 or adequate traceability documentation to verify product acceptability, along with available quantities and pricing. The acquisition will follow FAR 12 procedures for commercial items and FAR 13.5 for other than full and open competition, with no set-aside designated. Responses are due by August 12, 2026, and must be emailed to Matthew Diefes at matthew.diefes@dla.mil. The requested delivery is 11 units with a 255-day delivery window ARO, FOB Origin, with inspection and acceptance occurring at destination, and the item is subject to export control of technical data. The place of performance is Richmond, Virginia, and the contracting office is located at 23237. While the notice identifies the approved manufacturer and specifies the commercial nature of the item, it includes no pricing data, contract value, evaluation factors, or formal contract clauses, as it is preparatory in nature and not a binding solicitation. No packaging, marking, barcoding, or MIL-STD requirements are specified, and no representations, certifications, or socioeconomic claims from offerors are solicited or required beyond traceability and surplus documentation. The solicitation will proceed under terms consistent with standard DLA Aviation procurement practices, with award potentially based on price, past performance, and other factors outlined in the final solicitation document available via DIBBS.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

SPE4A726R0744 - 5342 - MOUNT, RESILIENT, WEAPON SYSTEM / WSIC F

Solicitation # SPE4A726R0744

The Defense Logistics Agency Weapons Support is conducting market research through a Sources Sought Notice for NSN 5342-005988824, MOUNT, RESILIENT, WEAPON SYSTEM, which is a Qualified Products List (QPL) item with P/N 17508, under NAICS code 336413. This effort is preliminary and does not constitute a solicitation or request for proposals; however, it aims to assess industry interest and capability to support a potential Indefinite Quantity Contract. Organizations capable of supplying this component are encouraged to voluntarily submit detailed information including organizational details, tailored capability statements, and documentation demonstrating their ability to meet technical, financial, managerial, and personnel requirements. The government will use the responses to determine market capacity, evaluate potential for small business set-asides or full and open competition, and assess readiness for performance-based acquisition. Companies interested in becoming an approved source must submit a Source Approval Request (SAR) package through the designated process, including contacting the DLA Aviation Small Business Office via email with specific subject and body requirements. All responses to this market research must be emailed to Thuy Ho at thuy.ho@dla.mil by August 11, 2026, at 6:00 PM Eastern Standard Time, and must include the organization's name, address, contact information, ownership structure, and supporting evidence of technical and operational readiness. Submissions will not be evaluated or acknowledged, and no feedback will be provided; failure to follow submission guidelines may result in exclusion from consideration. The requirement may lead to multiple awards, and the place of performance is Richmond, Virginia.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE4A626T13ZE

The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 790 eye bolts identified by NSN 5306012322350, with 789 units required for delivery to DLA Distribution Warner Robins within 739 days after contract award and one unit required for delivery within 60 days. The solicitation is restricted to Service-Disabled Veteran-Owned Small Businesses under a set-aside program as defined by FAR 19.14, and responses must be submitted electronically by the deadline of August 14, 2026. The North American Industry Classification System code for this procurement is 332722, indicating a focus on forgings and stampings. Offers must be submitted by qualified sources, and all timely responses will be considered regardless of origin. The contracting office is located in Richmond, Virginia, and inquiries should be directed via email to the designated point of contact specified in the solicitation document.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

16--LATCH ASSEMBLY,COUP

Solicitation # SPE4A726T628J

The contract solicits quotations for the LATCH ASSEMBLY, COUP with NSN 1670014703696, requesting a total of ten units across three line items delivered to W1A8 DLA DISTRIBUTION, with delivery deadlines of 408, 120, and 243 days after award respectively. All responsible sources are invited to submit electronic quotes, and timely submissions will be considered for award. The solicitation is issued under number SPE4A726T628J with a response deadline of August 14, 2026, and is classified as a combined solicitation under NAICS code 314999. The contracting activity is managed by DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia, and all communications must be directed via the designated point of contact email. The requirement is open to all eligible contractors without set-aside restrictions, and detailed information can be accessed through the provided SAM.gov link or DIBBS portal using the solicitation number.

All Other Miscellaneous Textile Product Mills

POSTED

about 9 hours ago

DEADLINE

53--BOLT,MACHINE

Solicitation # SPE4A626U3311

The solicitation seeks quotes for 12 machine bolts with NSN 5306001443655 under a Small Business Set Aside, with the NAICS code 332721, issued by the Department of Defense’s DLA Aviation office in Richmond, Virginia. Responses must be submitted electronically by August 21, 2026, and no hard copies are available. This RFQ may result in an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated 11 orders per year and a guaranteed minimum of one unit. Items will be delivered to multiple DLA depots across CONUS and OCONUS locations via consolidated and containerized shipping. All responsible sources are eligible to respond, and digitized technical documentation such as drawings and military specifications can be accessed electronically. For questions, contact must be made via the provided email address, and the full solicitation document is available on the SAM.gov and DIBBS websites using the solicitation number SPE4A626U3311.

Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

59--CABLE ASSEMBLY,SPEC

Solicitation # SPE4A726T628F

The contract solicitation is for 553 units of NSN 5995015213185, a cable assembly specified under solicitation number SPE4A7T628F, issued by the Defense Logistics Agency Aviation under the Department of Defense. The requirement is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB program, and all responses must be submitted electronically through the official SAM.gov portal by the deadline of August 14, 2026. Delivery is to be made to DLA Distribution location W1A8, with a required delivery timeline of 92 days after award. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided; interested parties must access the full solicitation online via the provided link. The point of contact for questions is listed as DibbsBSM@dla.mil, with inquiries directed to the buyer information in the solicitation document, which can be retrieved through the DIBBS portal if needed. The NAICS code is 334419, indicating the contract falls under Other Electronic Component Manufacturing.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

16--FIELD PACK,SURVIVAL

Solicitation # SPE4A726T628C

The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is soliciting quotes for 16 FIELD PACKS, SURVIVAL with NSN 1680013672929, to be delivered to DLA Distribution Jacksonville within 290 days after award. The approved source for this item is vendor 30941 with part number 325E400-1. This procurement is issued as a Request for Quote under solicitation number SPE4A726T628C, with no hard copies available—only electronic submissions through the designated online portal are accepted. All responsible suppliers may respond, provided their quotes are submitted electronically before the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and the solicitation is open without any set-aside designation. The North American Industry Classification System code is 336413, and inquiries must be directed via email to the designated point of contact. The solicitation can be accessed online through the SAM.gov workspace link, and additional information is available through DIBBS.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE