Top

Post-Warranty Maintenance and Spare Parts Supply

Active

International

Response Deadline09/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Government of Canada → Department of Agriculture and Agri-FoodView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 2

Submission deadline

Response Deadline

09/02/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyGovernment of Canada → Department of Agriculture and Agri-Food

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Agriculture and Agri-Food

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of non-proprietary consumables and spare parts (e.g., gaskets, valves, sensors) and optional service support after the 1-year warranty period.

Similar Contracts

Same NAICS industry code

NAICS: 423450

New

DIBBS

SAFETY BOX AND INCINERThe safety box and incineration container is a 5-liter biomedical waste container made from recycled board, designed for safe disposal of sharps such as syringes up to 0.5 ml with needle caps, accommodating 155 units per box. External dimensions before assembly are 590 x 280 x 4.5 mm, reducing to 342 x 159 x 130 mm after assembly, with wall and base thickness of 1.3 mm and a 38 mm diameter syringe insert hole. The container is waterproof, labeled with a biohazard symbol in black and red print on a white surface, and complies with WHO PQS Code E10/01. Each unit is flat packed, with 25 boxes per case, intended for outdoor lighting or incineration. The product is part of a standardized joint procurement under the MMESO system and must meet DLA technical and quality requirements referenced by R and I numbers from the DLA Master List. Packaging, labeling, and government identification removal comply with DLA regulations RP001 and RQ011. The NSN is 6530-01-460-4782, with a procurement quantity of 8 cases for delivery within 20 days to Waco, TX, under solicitation SPE2DH-26-T-5531, issued by the Department of Defense Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

BATTERY, ANALYZER, RECHAThe contract pertains to the procurement of four rechargeable batteries designed for use with the ISTAT Analyzer, identified by NSN 6630-01-526-4098, with a requirement for delivery within 20 days of award. Each unit must be properly packaged in a sealed container to prevent damage or breakage, and all shipments must use commercial exterior packaging suitable for safe transportation by common carrier at the lowest possible rate to the specified delivery point at JBPHH, Hawaii, with a ZIP code of 96853-5256. All items must be marked in strict compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number being offered. The procurement is governed by DLA packaging requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. The solicitation number is SPE2DH-26-T-5528, issued on July 27, 2026, with responses due by August 3, 2026, and the point of contact is Tina Vu of the Department of Defense, Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Handpiece and Consumables Supply (Future Replenishment)

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Naval Medical Research Center

POSTED

DEADLINE

Direct-to-Consumer Distribution of HIV and other STI Self-TestsThe Centers for Disease Control and Prevention’s National Center for HIV, Viral Hepatitis, STD, and TB Prevention is seeking to enhance a web-based ordering and distribution system to deliver at least 1.5 million HIV and other sexually transmitted infection self-tests directly to individuals in communities disproportionately affected by HIV. This initiative aims to increase access to testing, promote early detection, and facilitate timely linkage to treatment and preventive services, thereby reducing transmission rates and improving health outcomes. The program emphasizes expanding self-testing options as a strategy to reach underserved populations and strengthen public health responses to HIV and STIs. The opportunity, titled Direct-to-Consumer Distribution of HIV and other STI Self-Tests, was posted on July 27, 2026, and is part of a federal funding forecast under the Department of Health and Human Services. Interested parties can direct inquiries to Jessica Keralis via email at hrbnofo@cdc.gov or by phone at 301-458-4132. While no specific solicitation number or North American Industry Classification System code is provided, the emphasis is on optimizing an existing infrastructure to maximize reach, efficiency, and impact in high-burden areas, ensuring equitable access to critical health resources.

Centers For Disease Control - Nchhstp

POSTED

DEADLINE

Medical Product Palletization & Unit PackagingThe contract requires the palletization and packaging of prefilled syringes in strict accordance with DLA RP001 and the Medical Marking Standard No. 1, ensuring full compliance with unit identification and quantity unit requirements. All work must be executed to meet rigorous defense medical supply standards, with precise attention to labeling, packaging integrity, and logistical readiness for military distribution. The performance location is designated as Fort Bragg, North Carolina, with a zip code of 28310, and the work falls under the NAICS code 423450 for medical and dental equipment and supplies merchant wholesalers. This is a subcontract opportunity posted by the Department of Defense through the Medical Supply Chain Pharm FSA, with a response deadline of August 3, 2026. The solicitation is open for submissions through the DIBBS system and targets qualified subcontractors capable of handling sensitive medical products under defense-specific protocols. There is no specified set-aside classification, and the contract is structured to support the Department of Defense’s medical logistics infrastructure by ensuring prefilled syringes are properly prepared for storage, transport, and field deployment. Compliance with all technical and regulatory mandates is non-negotiable and must be demonstrated during proposal submission and execution.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Supply of Commercial ER-REBOA Plus Training CathetersThe contract seeks the supply of off-the-shelf ER-REBOA Plus non-sterile training catheters as a commercial item, ensuring compliance with WAWF and DFARS Appendix F requirements. These catheters are intended for training purposes and must meet standardized specifications without requiring customization or sterile processing. The solicitation is issued under the NAICS code 423450, reflecting its classification within medical equipment and supplies wholesale, and is structured as a subcontract within the Department of Defense’s Medical Supply Chain FSH framework. Performance is designated for Lackland AFB, Texas, with a delivery location specified by the zip code 78236-5638. The opportunity was posted on July 26, 2026, and responses are due by August 3, 2026, providing a seven-day window for offerors to submit proposals. The contract does not specify a set-aside type, indicating it is open to all eligible commercial suppliers. Access to detailed submission guidelines is available through the DIBBS platform using the provided reference number SPE2DH26T5511.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

NSN 6515016611786 SupplyThe contract involves the supply of NSN 6515016611786, a medical or utility component, to two U.S. military installations: Fort Stewart in Georgia and Fort Indiantown Gap in Pennsylvania. All shipments must adhere to military marking standards to ensure proper handling and identification throughout the logistics chain. The solicitation is classified as a subcontract under NAICS code 423450, which pertains to wholesale trade of medical and surgical equipment and supplies. The opportunity was posted on July 26, 2026, with responses required by August 3, 2026, indicating a compressed timeline for potential vendors to prepare and submit proposals. The contracting organization is the Medical Supply Chain MD Surg FSF under the Department of Defense, with the place of performance explicitly tied to Fort Stewart at the zip code 31314-5185. Full compliance with military shipping protocols and timely delivery to both locations is essential, and all interested parties must access the official solicitation via the provided DIBBS link for detailed submission requirements.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

APRON, X-RAY PROTECTIVEThe contract is for two X-ray protective aprons, each designed as a sleeveless, form-fitting coat with tie tapes for secure closure. The aprons feature a lightweight back weighing 10 pounds and measure 38 inches in length and 24 inches in width. They must be constructed from lead-impregnated plastic or a combination of lead and tin impregnated plastic, providing radiation protection equivalent to a minimum of 0.5mm of pure lead. The unit of issue is each, and delivery is required within 10 days of award. The aprons must comply with DLA packaging requirements and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6532-00-935-9765, and the purchase request number is 7017612566. The solicitation, issued under contract SPE2DS-26-T-272F, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas. The primary point of contact is Tiffany Parker, reachable via phone and email provided. The response deadline for bids is August 3, 2026, and the solicitation was posted on July 26, 2026. Any non-accepted supplies must have government identification removed prior to return.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BUCKET, KICK, SURGICAThe contract specifies the procurement of a surgical waste bucket, model BUCKET, KICK, SURGICA, with a National Stock Number 6530-01-501-0551, quantity of one unit, for use in operating rooms with a capacity of thirteen quarts. The bucket features a 360-degree rubber bumper, a stainless steel lid, and four casters, designed for safe and convenient waste collection. All packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container that prevents damage or breakage, and shipped in suitable exterior containers for safe delivery via common carrier at the lowest possible rate to the designated delivery point in APO, 09094-3219. Marking must strictly adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and documentation for this standard is available through DLA Troop Support. The item must be sourced with the correct part number and supplier identified by the bidder. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must conform to DLA’s procurement guidelines, government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. Delivery is required within 20 days of award, with the solicitation issued under SPE2DH-26-T-5491, opening on July 26, 2026, and closing on August 3, 2026, under the NAICS code 423450 for medical and dental equipment and supplies wholesale.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CYLINDER, GRADUATED, LABThe contract specifies the procurement of a single 100 mL graduated laboratory cylinder made of glass, with a single scale, pour-out mouth, and dimensions of 29 mm wide by 255 mm high. The item is identified by NSN 6640-00-420-0000 and is to be delivered within 20 days of award under solicitation SPE2DS-26-T-272H. Packaging must comply with commercial standards as outlined in DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a container that protects against damage or breakage and is shipped in suitable exterior containers to guarantee safe delivery at the lowest carrier rate to the FPO destination. All markings must adhere to Medical Marking Standard No. 1, which replaces references to MIL-STD-129, and bidders must provide the source and part number. The acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The response deadline is August 3, 2026, and the contract includes provisions for the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SODIUM CHLORIDE INJSodium Chloride Injection in 10 mL single-dose, preservative-free, latex-free syringes is being procured under contract SPE2DP-26-T-4287, with a total requirement of 47 packages, each containing 30 syringes, for a combined total of 1,410 syringes. The item is classified under NSN 6505-01-595-5160, with a unit of issue of PG, where one PG equals 30 units. The product must meet strict packaging and labeling requirements per the Medical Marking Standard No. 1, superseding MIL-STD-129, and must be commercially packaged in compliance with ASTM D3951 unless classified as hazardous, in which case IP025 requirements apply. All packaging must ensure protection from damage, be shipped via traceable freight methods excluding parcel post, and comply with DLA’s RP001 packaging standards. The product carries a non-extendable shelf life of 24 months and is regulated by the FDA, requiring official referral and confirmation prior to contract award. Deliveries are required within 20 days of contract award and must be FOB destination to multiple military locations including Fort Bragg, Fort Stewart, Fort Bliss, and others, as specified by distinct bulk break points. The contract includes five distinct line items corresponding to varying quantities per delivery point, with unit pricing set at $4.00 or $13.00 per PG depending on the CLIN, resulting in a total contract value of $219,400. Required delivery dates range from July 28 to July 29, 2026, with no允许数量偏差. All shipments must be properly marked with government identification, accompanied by valid tracking information, and delivered to designated military supply facilities. The contract is managed by the Department of Defense’s Medical Supply Chain, with specific oversight from the contracting officer and logistical coordination via designated military points of contact.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 6 days

View Details

More opportunities from Government of Canada → Department of Agriculture and Agri-Food

Same awarding agency

NAICS: 334510

New

International

Energy and Water Efficiency Technology Integration

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Operator Training for Autoclave Systems

POSTED

DEADLINE

On-Site Autoclave Installation and Commissioning

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Delivery and Logistics Services for Scientific Equipment

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Autoclave Steam Sterilizer Supply and Manufacturing

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

One (1) Autoclave Steam SterilizerAgriculture and Agri-Food Canada is seeking to procure one Autoclave Steam Sterilizer under solicitation number ESC-2627-050, with the opportunity reserved exclusively for suppliers holding Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment, parts, accessories, services, and supplies. The requirement is open to authorized vendors only, ensuring compliance with existing procurement frameworks for specialized scientific hardware. The solicitation was posted on July 27, 2026, with responses due by September 2, 2026, and the equipment will be delivered to the agency’s location in Ottawa. Jacques Toussaint, Contracting Authority, is the designated point of contact and can be reached via email at jacques.toussaint@agr.gc.ca. This solicitation is part of the federal government’s procurement process, and all interested parties must be pre-qualified under the specified supply arrangement to respond.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Shop Supply & Consumables ProvisionThe contract titled Shop Supply & Consumables Provision is a subcontract issued by the Government of Canada through the Department of Agriculture and Agri-Food for the supply of general maintenance, repair, and operations (MRO) consumables. These include lubricants, cleaning agents, safety gear, gaskets, fasteners, and tools essential for routine repair and maintenance activities across operational facilities. The procurement is targeted at vendors capable of reliably delivering a broad range of industrial consumables under consistent quality and timely delivery standards, with performance required to be carried out in Lacombe, Alberta, Canada. The solicitation was posted on July 24, 2026, with responses due by August 24, 2026, and it falls under the NAICS code 423860 for Industrial Merchant Wholesalers, Nondurable Goods. There is no specified set-aside classification, and the contract opportunity is open for competition without restrictions based on size or ownership status. Interested suppliers must submit proposals through the Canada Buys platform using the provided tender notice link.

Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

DEADLINE

Environmental Waste Disposal & Fluid HandlingThe contract encompasses the collection, transportation, and compliant disposal of regulated waste materials—including used oils, coolants, filters, batteries, and other hazardous fluids—generated through maintenance activities at the Lacombe facility in Alberta. All services must adhere strictly to environmental regulations and safety standards to ensure proper handling and disposal in accordance with federal and provincial requirements. The work is critical to maintaining operational compliance and minimizing environmental impact at the site. This is a subcontract under the Government of Canada, specifically for the Department of Agriculture and Agri-Food, with the NAICS code 562111 indicating waste management services. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026. Performance is required exclusively at the Lacombe location, and while no set-aside provisions are specified, bidders must demonstrate capability to manage regulated waste streams safely and legally. The contract does not include contact details, but all submissions must be made through the official CanadaBuys portal.

Solid Waste Collection

POSTED

DEADLINE

OEM and CSA-Approved Parts SupplyThe contract enables the supply of OEM and CSA-certified replacement parts for heavy agricultural machinery, covering critical components such as hydraulics, engines, filters, and drivetrain elements to ensure uninterrupted maintenance and operational reliability. All parts must meet strict certification standards to guarantee safety, performance, and compatibility with existing equipment used in agricultural operations across Canada. The procurement is structured as a subcontract under NAICS code 423840, aligned with the Government of Canada’s Department of Agriculture and Agri-Food, and performance is required to be delivered to Lacombe, Alberta. The solicitation was posted on July 24, 2026, with responses due by August 24, 2026, at 6:00 p.m. Eastern Time, and while no set-aside criteria or point of contact details are provided, participation requires full compliance with Canadian certification and quality assurance requirements for industrial parts.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Heavy Duty Mechanic – On-Site Maintenance & RepairsThe contract seeks a qualified provider to deliver certified heavy duty mechanic services at the Lacombe Research and Development Centre in Alberta, Canada, focusing on the diagnostics, routine maintenance, and urgent on-site repairs of agricultural and facility equipment. Services must be performed by certified technicians capable of handling heavy duty machinery used in research and operational settings, ensuring minimal downtime and adherence to safety and performance standards. All work is to be conducted on-site at the facility, requiring responsive and reliable service delivery, particularly for time-sensitive repairs that impact critical operations. This is a subcontract opportunity posted by the Department of Agriculture and Agri-Food under the Government of Canada, categorized under NAICS code 811490 for other commercial and industrial machinery and equipment repair and maintenance. The solicitation was made public on July 24, 2026, with a response deadline of August 24, 2026. Interested parties must submit proposals prior to the deadline to be considered, and performance is expected to be localized exclusively in Lacombe, Alberta. There is no set-aside classification indicated, and the contract does not specify any particular procurement preferences or eligibility criteria beyond standard certification and capability requirements for heavy duty mechanical services.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Heavy Duty Mechanic Services, AAFC, Lacombe Research and Development CentreThe Department of Agriculture and Agri-Food Canada, through its Lacombe Research and Development Centre, is seeking a contractor to provide heavy duty mechanic services on an as-needed basis under a contract that may last up to two years, beginning July 1, 2026. This solicitation replaces the prior one issued on April 30, 2026, and now closes on August 24, 2026, at 6:00 PM CST. Contracts will be awarded through task authorizations and are subject to a one-year term with an optional one-year extension. Bidders must meet all mandatory technical requirements to be deemed responsive, and the lowest priced compliant bid will be selected for award. Only Canadian suppliers or those from trading partner countries under applicable international agreements are eligible. Submissions must be made electronically via the CPC Connect service, and all documents may be provided in either official language. The procuring office is located in Regina, Saskatchewan, with Melissa Smith as the designated point of contact. The Government of Canada requires all bidders to comply with its Integrity Regime administered by Public Services and Procurement Canada, and failure to meet these standards may result in disqualification. Bidders are solely responsible for monitoring the Government Electronic Tendering Service (GETS) for any amendments, clarifications, or updates, as no direct notifications will be issued. The contract is not reserved for Indigenous businesses, but registration in the Indigenous Business Directory is encouraged to enhance visibility for future opportunities. All documentation is accessible through GETS, and the government assumes no liability for information found on third-party sites. Bidders are advised to carefully review solicitation documents and adhere strictly to submission guidelines outlined in Part 4.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Organizational Security Compliance (Designated Organization Screening)The contract requires the performance and ongoing maintenance of Designated Organization Screening (DOS) to ensure compliance with federal security standards for handling protected information. This subcontract is issued by the Government of Canada under the Department of Agriculture and Agri-Food, with all activities to be conducted within Canada. The screening process is critical for verifying organizational readiness and adherence to security protocols necessary for access to sensitive data. The solicitation was posted on July 23, 2026, and responses must be submitted by August 6, 2026, with a North American Industry Classification System code of 541611, indicating it pertains to administrative management and general management consulting services. The contract does not designate a specific set-aside type or point of contact, and all work must align with federal security mandates without deviation.

Administrative Management and General Management Consulting Services

POSTED

6 days ago

DEADLINE

in 9 days

View Details