Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Power Management & Energy Harvesting for Remote Sensors

Active

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the US Special Operations Command within the Department of Defense focuses on the development of power management and energy harvesting systems for remote sensors. The primary objective is to design ultra-low-power electronics and integrate energy harvesting solutions, such as solar, thermal, and kinetic power, to support long-duration unattended operations for distributed sensor networks. The project is categorized under NAICS code 335999 and was posted on April 15, 2026. It aims to enhance the operational longevity and autonomy of micro-sensors deployed in remote environments through advanced power efficiency and sustainable energy sourcing.

General Info

US Special Operations Command subcontract for remote sensor power management and energy harvesting.

Agency

Department Of Defense → US Special Operations Command (ussocom)View Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of evt_349.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PEO-SW: Distributed Micro Sensors

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedApr 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → US Special Operations Command (ussocom)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → US Special Operations Command (ussocom)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design ultra-low-power electronics and energy harvesting solutions (e.g., solar, thermal, kinetic) to enable long-duration unattended operation of distributed sensors.

Similar Contracts

Same NAICS industry code

Specialty Component Supplier for Fuel Cell Repair Kit

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6534

This contract is for the procurement of five stuffing tubes under solicitation SPE7M2-26-T-6534 for the Department of Defense. The items must be manufactured from HY80 alloy steel and adhere to specific technical drawings and military specifications, including MIL-S-24235. A critical requirement of this contract is the strict prohibition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking. The agreement mandates a First Article Test (FAT) in accordance with MIL-STD 831, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with delivery destined for the DLA Distribution center in New Cumberland, Pennsylvania. The required delivery date for the primary quantity is April 21, 2027, with a delivery lead time of 317 days.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

TERMINAL JUNCTION B

Solicitation # SPE7M2-26-T-6557

This contract is for the procurement of 20 sectional terminal junction blocks under solicitation SPE7M2-26-T-6557 for the Nuclear Reactor Program. The items are identified by NSN 5940014851763 and part number M81714/17-D33, and are classified as critical application items. The supplier must adhere to the Qualified Products List or Qualified Manufacturers List and comply with technical and quality requirements RA001, RP001, RQ002, and RQ011. Delivery is required within 61 days, with a need ship date of November 9, 2026, and a final delivery date of December 18, 2026. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking, except where specifically allowed for functional components. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

LIGHT, MARKER, CLEARA

Solicitation # SPE4A6-26-T-23YN

This contract is for the procurement of one clear marker light, identified by NSN 6220017225822 and part number 30086Y from Truck-Lite Co., LLC. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-23YN, with a required delivery date of June 29, 2026, and a delivery window of 20 days. The item is designated as a critical application item and must be shipped FOB Origin to the Naval Construction Group One in Port Hueneme, California, using the fastest traceable means. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will occur at the destination, and the supplier must comply with all specified physical identification and government marking removal requirements.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE7M2-26-T-6537

This contract is for the procurement of 24 rolls of white electrical insulation tape, measuring 1 inch in width, with a unit of issue of 108 feet per roll. The item is identified by NSN 5970-01-292-6948 and part number G565 from Saint-Gobain Performance Plastics Corp. This is designated as a critical application item with a non-extendable shelf life of 18 months. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods under MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Delivery is set for 216 days after order, with shipping destined for DLA Distribution Jacksonville. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

MOUNTING BASE, TIEDO

Solicitation # SPE4A7-26-R-0742

The solicitation for Mounting Base, Tiedo ATF under contract number SPE4A726R0742 is a presolicitation issued by the Defense Logistics Agency Aviation, with a firm fixed price structure for a quantity of 4,800 units, delivered FOB origin with inspection and acceptance at destination. The item is critical to application and only two approved sources are recognized: General Dynamics Mission Systems, Inc. with part number 86-1326374-2 and Panduit Corp with part number ABM2S-S6-D. The final award will consider price, past performance, and other evaluation criteria detailed in the complete solicitation. The solicitation will be publicly accessible via the DLA Internet Bid Board System on or around August 18, 2026, with responses due by September 18, 2026, and will only be available in PDF format requiring Adobe Acrobat Reader. The NAICS code is 335999, and the place of performance is in Richmond, Virginia, with primary point of contact Angela Haden and secondary contact Leslie Adams. The posting date is August 5, 2026, and the response deadline listed in the data is August 17, 2026, at 6:30 PM EST.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month

LAMP, LIGHT EMITTING DI

Solicitation # SPE4A5-26-T-375P

This solicitation, number SPE4A5-26-T-375P, is issued by the Department of Defense DLA Aviation ASC for the procurement of two light emitting diode lamps, identified by NSN 6220-01-694-4034 and Grimes Aerospace Company part number 72325519-1. This is a critical application item requiring certification of airworthiness and conformance for FAA certified parts. The contract mandates strict adherence to supply chain traceability documentation and FAA bare item marking requirements, though unique identification is not required by the service customer. The procurement specifies a delivery timeframe of 280 days after the order, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements, specifically noting fragile marking. The solicitation falls under NAICS code 335999 and requires compliance with various technical and quality requirements listed in the DLA master list.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5018

This contract is for the procurement of four wet charged lead acid storage batteries, identified by NSN 6140017189807 and Deere and Company part number TY25881B. The items are designated as critical application items and must adhere to a shelf life of 60 months. Delivery is required within 276 days to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of June 12, 2027. The supplier must comply with various DLA technical and quality requirements, including specific packaging, marking, and shipping standards for hazardous materials. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates strict adherence to mercury restrictions and hazardous communication standards, with all marking and palletization following MIL-STD-129 and RP001 guidelines.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

CONNECTOR, PLUG, FIBER O

Solicitation # SPE7M2-26-T-6548

This contract is for the procurement of 20 fiber optic plug connectors, identified by NSN 6060-01-653-7640 and part number M28876/7B12S1. The items must comply with MIL-PRF-28876/7F Revision F and are subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required within 301 days, with a requested ship date of July 7, 2027, and a final delivery date of September 22, 2027. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB Origin terms and destination inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting substances unless written approval is granted. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. Technical and quality requirements are further governed by the DLA Master List and specific configuration change management protocols.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-24EH

This contract is for the procurement of electrical insulation tape, identified as a commercial off the shelf item and a critical application item. The specific product is manufactured by 3M Company, part number 92 1/4IN, with NSN 5970-01-099-8567. The order consists of 8 rolls, with each roll containing 180 feet of tape. This item is subject to a non-extendable shelf life of 18 months. The agreement specifies a delivery timeframe of 5 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

CHARGER, BATTERY

Solicitation # SPE7L7-26-T-5016

This contract is for the procurement of 10 battery chargers, identified by NSN 6130-01-619-7626 and part number FH-32-A from Teledyne FLIR Defense, LLC. The order is managed by the Department of Defense through DLA Distribution Red River in Texarkana, Texas, with a required delivery date of December 21, 2026, and a delivery timeframe of 103 days after order. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and specific mercury-free constraints. Quality assurance will be conducted via sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, ensuring all items are marked and labeled according to federal specifications.

RED RIVER RECEIVING BLDG

POSTED

about 14 hours ago

DEADLINE

CHARGER, BATTERY

Solicitation # SPE7L7-26-T-5017

This contract is for the procurement of 20 battery chargers, identified as commercial items with part number BTC-70903-MR1 and NSN 6130-01-658-8523. The order is managed under solicitation SPE7L7-26-T-5017 with a required delivery date of January 19, 2027, and a delivery window of 132 days. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required for batteries or specific sensors, and requires compliance with covered defense information protocols.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → US Special Operations Command (ussocom)

Same awarding agency

Notice of Intent to Sole Source: ESRI Professional Services

Solicitation # H9240326RKC01

HQUSOCOM intends to award a sole-source, firm-fixed-price contract to ESRI for IT Professional services support for SOCOM HQ. This acquisition focuses on the Esri Advantage Program for ArcGIS Enterprise, providing a combination of on-site and local support to maintain geographic situational awareness and mission-critical intelligence-sharing capabilities. The total estimated value of the contract is 249,782.56 dollars, with a period of performance running from September 16, 2026, to September 15, 2027, and a place of performance at MacDill AFB, Florida. The government has identified ESRI as the only source capable of satisfying this requirement, noting that using third-party contractors would introduce significant technical risks and potentially void enterprise support agreements. While this is a notice of intent for a sole-source award, interested sources may submit capability statements to Kristen Colyer by the response deadline of September 6, 2026. The agency will use these submissions to determine if a competitive procurement will be conducted in the future.

Software Publishers

POSTED

about 19 hours ago

DEADLINE

PEO-FW Group 2 Air-Launched Effects (A2E)

Solicitation # evt_362

SOFWERX and the USSOCOM Program Executive Office Fixed Wing are hosting an Assessment Event to identify U.S. citizen vendors capable of integrating TRL 5+ small unmanned air system platforms into the Karman Systima Common Launch Tube. This initiative supports the Adaptive Airborne Enterprise program to enhance Find, Fix, Track, Target and Electronic Warfare missions for Air Force Special Operations Command. The goal is to identify airframes that can be rapidly integrated for launching Group 2 sUAS. The process consists of four phases, beginning with a submission deadline of September 25, 2026, followed by a downselect period and a virtual Assessment Event on October 27, 2026. Successful participants may enter into various agreements, including Other Transaction Authority, FAR-based contracts, or research and development agreements. These awards may lead to follow-on production contracts without additional competition based on successful prototype completion.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

PEO-M Unmanned Surface Vehicle (USV) Poseidon's Fury

Solicitation # evt_364

SOFWERX and the USSOCOM Program Executive Office Maritime are seeking U.S. persons from industry, academia, and national laboratories to collaborate on the development of the USV Mission-Aligned Reference Architecture. This initiative aims to establish a common design standard for Maritime Robotic and Autonomous Systems to improve Joint Force interoperability and reduce redundant platform development. The process consists of five phases, beginning with a virtual collaboration event on August 26, 2026, followed by a submission window for technology capabilities starting September 14, 2026. Selected participants will undergo a downselect process to attend a hands-on Assessment Event between November 2 and November 20, 2026, at the Roger F. Wicker Center in Mississippi. During this event, vendors will conduct on-water demonstrations of their Unmanned Surface Vehicles, which will be evaluated by subject matter experts based on technical merit and operational criteria. Successful participants may be eligible for various award vehicles, including Other Transaction Agreements, FAR-based contracts, or Cooperative Research and Development Agreements, with the potential for follow-on production awards.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

PEO-SDA: UxSAI Mission Autonomy Systems

Solicitation # evt_361

POSTED

about 2 months ago

DEADLINE

Small Business Event - SOF Week Prep Small Business Roundtable

Solicitation # H9240026SBRt58

The United States Special Operations Command (USSOCOM) is organizing a virtual Small Business Roundtable on May 6, 2026, from 2:00 PM to 4:00 PM Eastern Time, hosted by the Office of Small Business Programs. This event is exclusively for small businesses and aims to provide attendees with an overview of what to expect at SOF Week, along with tips to maximize their participation. The roundtable is intended to offer insight into the specific Program Executive Office (PEO) or directorate involved, but it is not designed for businesses to present their capabilities or receive forecasts of future procurement opportunities. Participation is limited to 300 individuals, and USSOCOM encourages a diverse mix of socio-economic categories, industries, and geographic locations. Due to high interest, a limit may be placed on the number of participants per firm. Attendees are expected to actively engage in discussions, especially around barriers to doing business and potential solutions. Interested firms must submit an invitation request by 8:00 AM local time on April 25, 2026, through the provided link, with selections notified by May 2. Selection criteria include socio-economic status, the products and services offered, experience with USSOCOM, prior attendance, timeliness of request, and firm location. Late submissions may be accepted on a space-available basis, and those not selected will be included in a list for future events.

All Other Support Services

POSTED

DEADLINE

Localization & Mesh Gateway Node DevelopmentThe US Special Operations Command under the Department of Defense is seeking a subcontractor for the Localization and Mesh Gateway Node Development project. The primary objective is to develop localized mesh gateway nodes capable of aggregating sensor data and securely backhauling that information to operator systems. The technical requirements specify that the nodes must support multiple communication pathways, including cellular, SATCOM, and radio links. This effort falls under NAICS code 334220 and is managed through the Department of Defense to enhance distributed micro-sensor capabilities.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Sensor Packaging & Environmental HardeningThe US Special Operations Command under the Department of Defense is seeking a subcontractor for the Sensor Packaging and Environmental Hardening project. The primary objective is to develop small-form-factor, ruggedized enclosures for sensor payloads designed for clandestine deployment. These enclosures must be capable of operating effectively across a wide range of diverse environments, specifically including urban, wooded, rural, and littoral zones. This subcontract falls under NAICS code 326299 and was posted on April 15, 2026. The effort is focused on ensuring that sensitive sensor equipment remains protected and functional while maintaining a low profile during deployment in challenging operational settings.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Open Architecture & Software Integration (APIs, ISA Compliance)This subcontract with the US Special Operations Command under the Department of Defense focuses on the development of an open and modular software architecture. The primary objective is to create documented APIs that ensure seamless interoperability with critical military systems, specifically targeting ATAK and ISA-compliant platforms. Classified under NAICS code 541512, the project emphasizes software integration to support distributed micro-sensors. The initiative is managed through the Department of Defense to enhance the technical capabilities and connectivity of special operations equipment.

Computer Systems Design Services

POSTED

DEADLINE

Secure Low Probability of Intercept (LPI) Data ExfiltrationThis subcontract, issued by the US Special Operations Command under the Department of Defense, focuses on the development of secure, low-power wireless communication protocols specifically designed for sensor mesh networks. The primary objective is to create a system that minimizes the risk of detection during the exfiltration of data from sensor nodes to gateway nodes, utilizing Low Probability of Intercept techniques. The project falls under NAICS code 334220 and is managed through the PEO-SW distributed micro-sensors initiative. It aims to enhance operational security by ensuring that data transmission remains covert and resilient against interception in sensitive environments.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Low-Cost Multi-Modal Sensor Payload DesignThe US Special Operations Command is seeking a subcontractor to design and prototype compact, passive sensor nodes capable of detecting a wide range of modalities, including RF, seismic, acoustic, magnetic, EO/IR, GSR, and hazardous CBRN contaminants. The project emphasizes a modular design approach to ensure versatility across different sensing applications. A critical requirement of this effort is the achievement of low unit costs, with a target of less than 200 dollars per unit during the initial assessment phase and a further reduction to under 100 dollars per unit upon reaching maturity. This subcontract falls under NAICS code 334510 and is managed through the Department of Defense.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

PEO-SW: Distributed Micro Sensors

Solicitation # evt_349

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

PEO-M-U: Battery Bottle

Solicitation # evt_339

SOFWERX and the USSOCOM Program Executive Office Maritime, Undersea are seeking U.S. citizens from industry, academia, and national labs to evaluate and manufacture pressure-capable containment pods for large format, propagation resistant battery designs. The selected vendor will be responsible for reviewing government designs for manufacturability, providing cost and schedule estimates, and delivering an initial quantity of pods that are watertight, pressure-resistant, and shock-resistant. The government will maintain design authority and handle all applicable testing. The selection process consists of four phases, beginning with a submission deadline of September 8, 2026, followed by a downselect and a virtual Assessment Event on September 30, 2026. Successful participants may enter into various agreement types, including non-FAR or FAR-based contracts, OTAs, or research and development agreements. Notably, a successful prototype award under 10 U.S. Code Section 4022 may lead to a follow-on production agreement without further competition. Awardees may be required to comply with NIST SP 800-171 standards for protecting controlled unclassified information.

Battery Manufacturing

POSTED

DEADLINE