Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Environmental Chamber Manufacturing

Active

International

Response Deadline08/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the design and manufacture of a high-stability air bath system capable of maintaining temperature control within ±10 millikelvin for metrology-grade calibration of standard resistors. This system must meet exacting environmental stability specifications to ensure the precision required for calibration tasks in国家级 metrology laboratories. The technical demands center on thermal uniformity, long-term drift minimization, and minimal interference with sensitive electrical measurements, emphasizing reliability under continuous operation without external disturbances. The solicitation is issued as a subcontract by the National Research Council of Canada under the Government of Canada, with the North American Industry Classification System code 334516 indicating specialized instrumentation manufacturing. The response deadline is August 4, 2026, and performance is expected to occur within Canada. The contract targets suppliers with proven capability in precision environmental control systems, particularly those experienced in supporting national metrology standards and high-accuracy electrical calibration workflows. There is no set-aside designation specified, and the opportunity is open to qualified vendors capable of delivering a system that meets stringent technical and performance thresholds without reliance on external references or documentation.

General Info

Design and manufacture of a ±10 mK air bath for metrology-grade resistor calibration in Canada by August 4, 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design and manufacture of a high-stability air bath system with ±10 mK temperature control for metrology-grade calibration of standard resistors.

Similar Contracts

Same NAICS industry code

Sole source notice for an Gas Cluster Ion Beam (Argon Source) SystemThe University of Mississippi is procuring a lone lonoptika GCIB 10S Gas Cluster Ion Beam (Argon Source) System through a sole source justification under FAR 6.302-1, with a total estimated value of $121,740. This acquisition is non-competitive due to the system’s unique and proprietary capabilities required to integrate with existing custom instrumentation in the Department of Chemistry & Biochemistry, including real-time cluster measurement, sample current imaging, and ultra-thin film sputtering over a precise 7x7 mm area—functions unmatched by any commercially available alternative. The solicitation, identified as Smart number 9270-27-R-RFIN-00001 and RFx 3150006943, was posted on July 20, 2026, with responses due by August 4, 2026, at 10:00 AM CST. All objections to the sole source status must be submitted by the deadline via email to solesource@olemiss.edu (with a copy to purchase@olemiss.edu), or via mail or hand delivery to the university’s procurement office in University, Mississippi, and must include full contact details and a statement of the objector’s capabilities to meet the technical requirements. The place of performance and acceptance is the university campus, where the system will be installed and operated. No standard FAR clauses, packaging or marking specifications, military standards, or evaluation factors are included in the solicitation, as the procurement relies solely on the technical necessity and exclusivity of the ion source model. The contract does not specify payment processes, accounting codes, invoicing systems, or delivery terms such as FOB, and no formal COR, COTR, or PCO is designated beyond Jeff Wells, Procurement Manager, who serves as the primary point of contact. Vendor representations, certifications, or socioeconomic status information are not applicable, as the procurement is not subject to small business set-asides or competition. The system will be delivered as a single unit with no options or line items, and acceptance will be based on meeting the defined technical performance criteria without reference to formal industry standards.

UNIVERSITY of MISSISSIPPI

POSTED

DEADLINE

Resolver Support Unit Manufacturing and AssemblyThe contract entails the full manufacturing and assembly of 30 resolver support units, covering every phase from production and quality control to packaging and final shipment. The work is performed under a subcontract arrangement for the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 334516 indicating classification within the navigational, measuring, electromedical, and control instruments manufacturing sector. All deliverables must meet stringent defense standards, ensuring reliability and precision for operational use. The contract was posted in July 2026 and is managed under the reference number SPE7L126P9036, with performance expectations aligned to meet the needs of a federal defense program. No set-aside provisions are specified, and the place of performance is not detailed, suggesting flexibility in location so long as the final units are delivered in compliance with contractual requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of ARM, SWITCH ACTUATOR (NSN 5930-01-298-3505)The contract involves the manufacture and supply of twelve precision electromechanical switch actuators fully compliant with the military National Stock Number (NSN) 5930-01-298-3505, ensuring adherence to stringent defense standards for performance, reliability, and environmental resilience. All units must meet exacting traceability requirements, including full documentation of materials, batch numbers, manufacturing processes, and quality control inspections to support military logistics and maintenance operations. Production is governed under NAICS code 334516, indicating specialized electronic component manufacturing, and the work is being procured as a subcontract under the Defense Logistics Agency, representing the Department of Defense’s centralized supply chain. The contract was posted on July 20, 2026, and is identified by the award reference SPE7M824V2252, though no solicitation number is provided, suggesting it may have been issued directly through a pre-qualified vendor channel. Place of performance and point of contact details are omitted from the record, but the work is intended to support DLA’s broader mission of equipping and sustaining U.S. military systems. The absence of set-aside information indicates the opportunity is open to any qualified supplier, regardless of business size or status, with the sole focus on technical compliance and fulfillment of military-grade specifications.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Colorimeter (Comparative Type)The contract entails the supply of one or more comparative colorimeter units manufactured by Hanna Instruments with CAGE code 77AV5 and Part Number HI705, fully compliant with specified technical and delivery requirements. The equipment is intended for use in precise color measurement applications, and the contractor must ensure all units meet the defined performance and quality standards outlined in the contract. This is a subcontract issued under the Department of Defense, administered by the Defense Logistics Agency, with the NAICS code 334516 indicating classification within the instrumentation manufacturing sector. The contract was posted on July 20, 2026, and the place of performance and specific delivery address are not detailed, though the award reference is accessible via the provided DIBBS link. All deliverables must adhere to the contractual obligations without deviation, and compliance with federal procurement standards is mandatory.

Defense Logistics Agency

POSTED

DEADLINE

Electrostatic Discharger Manufacturing and AssemblyThe contract entails the full production, assembly, testing, and delivery of 62 electrostatic dischargers in strict adherence to military specifications, ensuring all components and processes meet rigorous defense standards. Quality assurance is governed by ISO 9001:2008 and AS9100 certification requirements, with explicit protocols in place to prevent the inclusion of counterfeit parts throughout the supply chain. The work falls under NAICS code 334516, indicating classification within the other electronic component manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. All activities are expected to comply with the technical and procedural mandates of the military supply chain, with delivery obligations tied directly to mission-critical defense operations.

Defense Logistics Agency

POSTED

DEADLINE

Laboratory Centrifuge Supply and DeliveryThe contract requires the supply and delivery of two commercial off-the-shelf laboratory centrifuges to Camp Kinser, Japan, with delivery terms set at FOB destination. The equipment must fully comply with all applicable federal and Defense Logistics Agency technical specifications, including packaging, labeling, and documentation requirements to ensure seamless integration into military medical operations. The solicitation is classified as a subcontract under NAICS code 334516, indicating focus on laboratory machinery manufacturing, and was posted on July 20, 2026, with responses due by July 27, 2026. The contracting agency is the Medical Supply Chain FSH under the Department of Defense, and while specific location details are not provided, the delivery point is clearly identified as Camp Kinser, Japan. All submissions must meet stringent federal standards to qualify for acceptance and payment.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

RFID Tagging and Smart Labeling ServicesThe contract requires the application of item-level passive RFID tags compliant with ISO/IEC 18000-6C standard to glove inserts, with each tag assigned a unique EPC number that is electronically linked to the National Stock Number and unit pack information. These tags must be readable by VIM and ASAP systems, ensuring seamless integration with existing Department of Defense logistics and inventory management platforms. The tagging process must adhere to MIL-STD-129 requirements for military uniform labeling and marking, guaranteeing consistency, durability, and reliability in field conditions. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 334516 and is focused on smart labeling services to enhance supply chain visibility and tracking accuracy. The work must be performed in compliance with all federal defense standards, though the specific place of performance and point of contact are not specified. The contract was posted in July 2026 and is accessible through the DIBBS portal, indicating it is part of a broader effort to modernize logistics operations through automated identification technologies.

Defense Logistics Agency

POSTED

DEADLINE

Pressure Switch Supply and DeliveryThe contract requires the supply, packaging, and delivery of 34 pressure switches identified by NSN 5930010466939 to a government-designated origin point in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All items must comply with military specifications and cybersecurity standards to ensure operational readiness and secure integration into defense systems. The contract is structured as a subcontract under NAICS code 334516, administered by the Electrical Devices Division within the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, allowing potential vendors a limited window to submit proposals. Delivery must be coordinated to meet the designated delivery location and adherence to all defense-grade quality and security requirements is mandatory.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Meter Movement Hardware ComponentsThe contract entails the manufacture and supply of nine precision meter movement components identified by NSN 6695-00-438-3975, specifically engineered to meet stringent military specifications and logistical standards set by the Defense Logistics Agency. These components are critical for military-grade instrumentation and must adhere to exacting quality, performance, and durability criteria to ensure operational reliability under demanding environmental conditions. The work is structured as a subcontract under the broader DLA procurement framework, with the North American Industry Classification System code 334516 indicating it falls within the category of instrumentation manufacturing. The contract was posted on July 20, 2026, and is tied to the DLA’s centralized logistics system for defense materiel, with performance obligations aligned to DLA's supply chain protocols. While specific delivery timelines and payment terms are not detailed here, the requirement implies strict compliance with government procurement regulations, including quality assurance, documentation, and traceability standards. The place of performance and point of contact information are not specified, suggesting the work may be distributed across approved vendor facilities, and all deliverables must be cleared through DLA’s established distribution network under contract number SPE4A526P2340.

Defense Logistics Agency

POSTED

DEADLINE

Precision Electronic Component ManufacturingThe contract requires the manufacture and assembly of a military-grade switch assembly compliant with MIL-DTL-28786 standards, involving precise mechanical and electrical integration to meet stringent defense specifications. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under the NAICS code 334516 for electromagnetic and other electronic component manufacturing. This is a subcontract opportunity sponsored by the Department of Defense under the Nuclear Reactor Program, with a response deadline of July 31, 2026. The solicitation was posted on July 20, 2026, and bidders must submit proposals prior to the deadline to be considered for award. The nature of the work demands high reliability, precision engineering, and adherence to military performance and durability criteria without room for deviation from technical specifications.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Measuring and Test Equipment Supply (P/N: 23069867)The contract involves the supply of four units of measuring and test equipment with part number 23069867, requiring full compliance with technical specifications set by the Defense Logistics Agency, including quality standards and military labeling requirements. The equipment must meet all applicable military and regulatory criteria to ensure suitability for defense applications, with performance and delivery expectations tied to strict operational and procedural guidelines. The solicitation is listed as a subcontract under NAICS code 334516 and was posted on July 20, 2026, with responses due by July 28, 2026. Performance is designated to occur in Tracy, California, with a ZIP code of 95304-5000. The contracting activity is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the official solicitation can be accessed through the DIBBS system using the provided link. No set-aside provisions or specific organizational type restrictions are indicated, and no point of contact details are provided in the data.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Electro-Mechanical Actuator SupplyThe contract entails the supply of three electro-mechanical actuators identified by NSN 4810-01-736-5020, manufactured to meet stringent military specifications and technical requirements established by the Defense Logistics Agency. These components are critical to defense systems and must comply with all applicable DLA standards to ensure operational reliability and interoperability in military environments. The award is classified as a subcontract under the NAICS code 334516, indicating it pertains to the manufacturing of other electronic components and equipment. The contract was posted on July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. While specific performance locations and point of contact details are not provided, the procurement is tied to the official DLA contract record identified by the number SPE7MC26P3155. The absence of set-aside designations suggests the opportunity is open to all eligible suppliers, with no preference given to small businesses or other categories. Delivery and compliance are expected to align with DLA’s logistical and quality assurance protocols for defense-critical hardware.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Technical Documentation and User Interface DevelopmentThe contract titled Technical Documentation and User Interface Development seeks a subcontractor to produce comprehensive technical manuals, a graphical user interface, and fully bilingual English/French operational documentation to support user training and ongoing system maintenance. The deliverables must meet high standards of clarity and usability, ensuring that end users across Canada can effectively operate and maintain the associated systems regardless of their primary language. The work requires expertise in technical writing, software interface design, and professional translation services to maintain consistency and accuracy in both official languages. This subcontract is issued by the National Research Council of Canada under the Government of Canada, with a solicitation posted on July 20, 2026, and a response deadline of August 4, 2026. The NAICS code 541830 indicates this falls under the category of other scientific and technical consulting services. The performance location is designated as Canada, and while no specific office address or point of contact is provided, interested parties must submit proposals through the official Canada Buys portal using the provided UI link before the deadline. The contract does not specify a set-aside type, meaning it is open to all qualified vendors.

Media Buying Agencies

POSTED

DEADLINE

High-Precision Sensor and Calibration ServicesThe contract seeks the supply and calibration of high-accuracy temperature sensors, including standard platinum resistance thermometers, capable of sub-millikelvin precision to ensure precise monitoring of environmental chamber stability and thermal uniformity. These sensors are critical for maintaining rigorous temperature control in laboratory and research settings where minute deviations can impact experimental integrity. The work requires comprehensive calibration services traceable to national standards to guarantee measurement accuracy and reliability under controlled conditions. The procurement is issued as a subcontract by the National Research Council of Canada under the NAICS code 541320 for scientific and technical consulting services. Responses are due by August 4, 2026, with the opportunity posted on July 20, 2026, and performance expected to take place within Canada. The contract emphasizes technical capability, calibration documentation, and adherence to ultra-high precision requirements without specifying set-aside provisions or point of contact details, indicating a competitive process open to qualified suppliers meeting stringent metrological standards.

Landscape Architectural Services

POSTED

DEADLINE

CSA Safety Certification and Compliance TestingThe contract seeks third-party safety testing and certification services for an air bath system to ensure compliance with CSA or equivalent Canadian safety standards. The work is classified as a subcontract under NAICS code 541380, indicating specialized scientific and technical services, and is issued by the National Research Council of Canada on behalf of the Government of Canada. All testing must be conducted to meet the stringent regulatory requirements applicable in Canada, with results validated by an accredited certification body. The performance location is within Canada, and the services are critical for regulatory approval and market access of the system. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, giving potential vendors approximately two weeks to prepare and submit proposals. The contract does not specify a set-aside classification, suggesting it is open to all qualified entities regardless of business size or status. While no point of contact is listed, interested parties can access further details through the official tender portal linked in the contract data. The successful bidder will be responsible for delivering comprehensive documentation, test reports, and certification evidence to demonstrate full compliance with applicable Canadian safety regulations.

Testing Laboratories and Services

POSTED

DEADLINE

Remote Monitoring and Control System IntegrationThe contract seeks integration of remote operation and monitoring capabilities for an air bath system through communication interfaces including RS232, Ethernet, USB, or GPIB, enabling real-time control and data acquisition from a distance. The system must support seamless, reliable connectivity to ensure precise temperature regulation and operational oversight without requiring physical access, targeting applications that demand high precision and continuous monitoring. The technical solution must be robust, compatible with existing infrastructure, and capable of sustaining continuous operational demands under standard laboratory conditions. Issued as a subcontract by the National Research Council of Canada under the Government of Canada, the solicitation is open for responses until August 4, 2026, with a North American Industry Classification System code of 541330 indicating it relates to scientific research and development services. Performance is expected to occur within Canada, and while no specific set-aside or point of contact is detailed, the requirement targets qualified vendors experienced in industrial automation, instrumentation control, and laboratory equipment integration. The posting is accessible via the Canada Buys portal, and proposers are expected to demonstrate proven capabilities in implementing similar remote monitoring solutions for environmental or thermal control systems.

Engineering Services

POSTED

DEADLINE

Air Bath for Standard ResistorsThe National Research Council of Canada is procuring a single air bath system to replace its existing oil bath, ensuring a dry, clean, silent, and thermally stable environment for precision standard resistors used in thermometry applications, particularly for calibrating standard platinum resistance thermometers. The system must maintain temperature stability and uniformity of ±10 mK or better over 24 hours at 23°C, operate within a temperature range of 15°C to 35°C, and feature an internal volume between 50 and 120 liters with a set point resolution of 0.01°C or better. Remote control and data extraction are mandatory through standard interfaces such as RS232, Ethernet, GPIB, or USB, and the unit must be certified by CSA or an equivalent Canadian safety standard. The procurement is conducted as a sole-source award under subsection 6(d) of the Government Contracts Regulations, with Measurements International identified as the only capable supplier. Other vendors may submit a Statement of Capabilities by August 4, 2026, to challenge the sole-source determination, but must demonstrate full compliance with all technical requirements. Delivery is required by January 1, 2027, to the NRC’s facility in Ottawa, Ontario, and acceptance will occur upon verification of compliance at the delivery site. No contract value, pricing, or payment details are provided, and the solicitation does not include formal evaluation factors, weights, or contract clauses under the Federal Acquisition Regulation. The procurement is exempt from international trade agreements, and all submissions must be directed to Tamara Stabb, Procurement Officer, via email or written correspondence.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

26-58075 Radio Frequency (RF) Test and Measurement SuiteThe National Research Council of Canada is seeking a fully integrated radio frequency (RF) test and measurement suite capable of supporting advanced metrology and quantum sensing research. The system must include a high-performance signal generator with a frequency range from 10 kHz to 50 GHz, featuring an integrated frequency multiplier that extends its output to 110–170 GHz and is controllable through the same interface. The generator must deliver exceptional signal purity with low phase noise and minimal harmonics, and it must accept external frequency references at either 10 MHz or 100 MHz to ensure long-term stability. Accompanying this is a signal/spectrum analyzer with a measurement range up to 50 GHz, designed to accurately capture signal magnitude, frequency content, harmonics, and spurious emissions for validating sensor outputs and system performance. A vector network analyzer with a frequency range up to 44 GHz is also required to comprehensively characterize RF components by measuring both magnitude and phase of reflection and transmission parameters, supporting testing environments from room temperature to cryogenic conditions. The entire system must function as a unified, compatible solution, ensuring seamless operation and data correlation across all instruments. The requirement arises from the critical need for precision RF instrumentation in quantum metrology, where accurate control and readout of quantum sensors depend on stable, low-noise signal generation and precise measurement capabilities. The suite will be used to validate experimental systems, ensure signal integrity, and characterize components under extreme operating conditions. Proposals must be submitted by August 14th, 2026 at 2 PM EDT, following a questions and answers period that concludes on August 7th, 2026. The solicitation, issued by the National Research Council of Canada under number 26-58075, is open to eligible suppliers and specifies that performance will take place in Canada. Primary point of contact for inquiries is Shawn Doyle, Contracting Authority, reachable via email or phone provided in the solicitation.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

M-10 Partial Exterior Envelope ReplacementThe contract pertains to the exterior envelope and main entrance renewal of Building M-10 at the National Research Council Canada’s campus located at 1200 Montreal Road, Ottawa, Ontario, K1A 0R6. This procurement, identified by solicitation number 26-58015 under NAICS Code 238190, is exclusively open to Canadian suppliers due to the Policy on Reciprocal Procurement, and submissions from non-trading partners will be rejected. Bidders are required to attend one of two mandatory site visits on June 16 or 17, 2026, at the main entrance of Building M-10. Proposals must be submitted by July 22, 2026, and all work must be completed by March 31, 2027, with a performance period of 36 weeks from notification of award. The scope includes demolition, concrete restoration, metal fabrications, thermal and moisture protection systems, aluminum doors and glazing, gypsum board assemblies, and granular backfill, all executed in accordance with specified construction sections and technical requirements. Contractors must retain a qualified geotechnical engineer for investigations and testing, and all materials must be delivered in original factory packaging, labeled with manufacturer details, and stored off the ground in dry, clean, well-ventilated areas per manufacturer instructions. Packaging waste must be removed and returned as per the Construction Waste Management Plan. The contractor is obligated to comply with stringent security protocols, including valid Security Clearance for all personnel as outlined in SC01, and must maintain site security during alterations. Performance and payment bonds in prescribed government formats, issued by federally, provincially, or territorially licensed sureties, are mandatory. Insurance coverage must be obtained from insurers licensed to operate in Canada, and compliance with both Ontario and federal occupational health and safety regulations is required. All quality control testing must be conducted by independent agencies paid for by the contractor, with reports submitted digitally and including project identification, agency details, and dates. Final aesthetic standards demand defect-free surfaces, with walls and ceilings inspected under specified viewing conditions and lighting, and all products must be new, undamaged, and of the highest quality. The contractor must maintain complete and accurate financial records in machine-readable formats such as Excel, available for audit at Canada’s request during normal business hours. Cost breakdowns must be submitted within 72 hours of award and serve as the basis for all claims. A master Gantt

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

in about 19 hours

Indigenous Participation Plan (IPP) ImplementationThe National Research Council of Canada is seeking a contractor to implement an Indigenous Participation Plan aimed at achieving a mandatory 5% Indigenous procurement target across the project lifecycle. This subcontract opportunity requires the successful bidder to develop and execute a detailed strategy that promotes meaningful engagement with Indigenous firms through subcontracting, hiring, or strategic partnerships. The plan must demonstrate measurable actions and outcomes that contribute to economic inclusion and capacity building within Indigenous communities across Canada. All activities must be structured to ensure compliance with the 5% target, with documentation and reporting protocols to verify progress throughout the contract term. The opportunity is open for responses until August 25, 2026, and is categorized under NAICS code 541611, which corresponds to management, scientific, and technical consulting services. The place of performance is across Canada, with no specific geographic limitations other than national scope. The contract falls under the Government of Canada’s broader commitment to Indigenous economic participation and does not specify a set-aside designation, meaning all eligible firms may respond. While no point of contact is listed, interested parties are directed to the Canada Buys portal for further details and submission requirements. Contractors are expected to align their approach with federal policies on Indigenous reconciliation and economic development.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Watermain Pipes and Fittings SupplyThe contract involves the supply of ductile iron, PVC, HDPE pipes, valves, hydrants, and fittings for watermain systems, all of which must comply with Canadian standards to ensure durability, safety, and regulatory adherence. The materials are intended for use across public water infrastructure projects in Canada, with specific requirements focused on material quality, pressure ratings, and installation compatibility to meet national plumbing and water distribution benchmarks. The solicitation is issued as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a response deadline of August 25, 2026. The North American Industry Classification System code 423720 identifies the scope as wholesale trade of hardware, plumbing, and heating equipment. Performance of the contract is expected to occur throughout Canada, and interested suppliers must submit proposals before the stated deadline to be considered for award, with no set-aside provisions specified for small or disadvantaged businesses.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Environmental Compliance and GHG ReportingThe contract titled Environmental Compliance and GHG Reporting requires the monitoring and systematic reporting of greenhouse gas emissions generated during construction activities across Canada, with the explicit goal of ensuring alignment with federal greenhouse gas reduction targets. The work involves collecting accurate emissions data from various construction sites, analyzing trends, and submitting compliant reports to meet government-mandated environmental standards. The scope demands technical expertise in emissions tracking methodology and a thorough understanding of federal environmental regulations applicable to construction operations. This subcontract, issued under NAICS code 541620, is solicited by the National Research Council of Canada on behalf of the Government of Canada, with a response deadline of August 25, 2026. Performance must occur throughout Canada, reflecting a national scope of operations. Interested parties are expected to demonstrate proven capability in environmental monitoring services and possess the infrastructure to deliver consistent, verifiable emissions data in real time. The contract underscores the Government of Canada’s commitment to environmental accountability in public construction projects and requires strict adherence to timelines, data integrity, and regulatory compliance throughout the performance period.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Surveying and As-Built DocumentationThe contract entails comprehensive topographic and layout surveys throughout all phases of construction, ensuring accurate spatial data collection to support project alignment and utility placement. These surveys are critical for ongoing construction accuracy and must be performed with precision to monitor changes and confirm adherence to design specifications. Final deliverables include certified as-built documentation that verifies the exact location, alignment, and configuration of all installed utilities, providing a legally recognized record of subsurface and surface infrastructure. The work is subcontracted under the National Research Council of Canada, a Government of Canada entity, with the place of performance located across Canada. The solicitation was posted on July 16, 2026, with responses due by August 25, 2026, and falls under NAICS code 541370, which pertains to surveying and mapping services. There is no specified set-aside classification, and the contract is open to qualified subcontractors capable of delivering high-accuracy survey data and authoritative as-built certification required for regulatory and operational compliance.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in about 1 month

Watermain Installation and ExcavationThe contract encompasses the full scope of watermain installation and excavation services, including trenching, installation of water mains, backfilling, compaction, and comprehensive site restoration to meet established municipal standards. All work requires meticulous utility coordination to ensure safety and minimize disruptions, with strict adherence to government-mandated water infrastructure protocols. The effort demands precision in earthwork, material handling, and environmental compliance throughout the project lifecycle. This is a subcontract opportunity issued by the National Research Council of Canada under the Government of Canada, classified under NAICS code 237110 for utility system construction. The solicitation was posted on July 16, 2026, with a response deadline of August 25, 2026. Work is to be performed across Canada, and bidders must be prepared to meet all contractual obligations regarding timelines, quality control, and regulatory compliance. The opportunity is accessible through the Canada Buys portal with the provided tender link.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month