Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Manufacturing – Collar, Pin-Rivet (P/N HST15722AWT-5)

Active

Federal

Response Deadline07/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of precision-engineered collar pin-rivets under part number HST15722AWT-5, fabricated to meet strict military specifications that include machining, heat treatment, finishing, and comprehensive inspection processes to ensure dimensional accuracy and structural integrity. The work is classified as a subcontract under NAICS code 332722 and is managed by the ASC Commodities Division of the Department of Defense, with performance required at a designated facility in New Cumberland, Pennsylvania, zip code 17070-5002. All components must be produced to exacting military standards, and quality control procedures are integral to the fulfillment of this requirement. The solicitation was posted on July 12, 2026, and responses are due by July 20, 2026, with no set-aside provisions specified, indicating potential eligibility for all qualified private vendors. The contract is publicly accessible via the DIBBS portal, and while no point of contact is listed, prospective bidders are expected to review all technical and compliance documentation through the provided link. Delivery timelines, packaging, labeling, and documentation must align with DOD requirements, and failure to meet specifications may result in rejection of the lot or termination of contractual obligations.

General Info

Manufacture and deliver precision collar pin-rivets HST15722AWT-5 to military specs by July 20, 2026, in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 12

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of precision-engineered collar pin-rivets to military specifications, including machining, heat treatment, finishing, and inspection.

Similar Contracts

SCREW, MACHINEThe contract is for the procurement of 60 machine screws with NSN 5305-01-687-7292 and part number 1035038-001, issued under solicitation SPE4A6-26-T-05MC by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging codes and methods, and marking must adhere to MIL-STD-129 without special identifiers. Palletization follows DLA packaging requirements, and shipment must occur via the fastest traceable means, excluding parcel post. The delivery address is Tobyhanna Army Depot, with a designated receiving bay and freight shipping location. The required delivery date is June 12, 2026, and the contract includes technical and quality standards referenced from the DLA Master List, with sampling procedures to follow MIL-STD-1916 or ASQ H1331 using zero defect acceptance unless otherwise specified. All items must be physically identified per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The contract specifies the use of approved units of issue and includes detailed logistics data, including shipment tracking codes and point of contact information for inquiries.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

CLAMP, LOOPThe contract solicitation SPE7L4-26-U-0959 is for the procurement of 1,452 clamp and loop hardware items defined by NASM21333 Revision 3 dated 11/30/2022, part number MS21333-116, under a full and open competition as a critical application item. This is an indefinite-delivery contract (IDC) with a guaranteed minimum of 217 units and a maximum contract value of $350,000.00; the quantity of 1,452 is an estimate and not guaranteed for purchase. Delivery is required within 74 days FOB origin to destination for inspection and acceptance, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E using Preservation Method 10 (clean/dry), Unit Container D3, and Pack Code U, with palletization following DLA’s RP001 requirements. All items must be marked per MIL-STD-129 including 2D Data Matrix barcodes for Item Unique Identification (IUID), with no special marking required. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in samples unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality: VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor. The hardware must be manufactured to the current revision of the part standard, and prior revisions are acceptable only if they were the current standard at the time of manufacture. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, labor, safety, and compliance, including the requirement to comply with NIST SP 800-171 for safeguarding covered defense information, adherence to the prohibition on acquiring covered telecommunications equipment, and mandatory reporting of cyber incidents. Offerors must represent their small business status and provide Unique Entity Identifiers and CAGE codes if claiming socioeconomic status or providing defense telecommunications products. All invoicing and document submission must occur through the Wide Area WorkFlow (WAWF) system, and shipments of hazardous materials must comply with 29 CFR 1910.1200 and MIL-STD-129, with exceptions for certain regulated substances. Ocean transportation must use

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

WASHER, LOCKThe contract specifies the procurement of four lock washers with NSN 5310-01-661-3876 under solicitation SPE7L1-26-T-825J, issued by the Defense Logistics Agency through its Land Supply Chain office. The unit price is $4.00 per unit, totaling $16.00, with a firm-fixed price structure and no quantity variance allowed. Delivery is required within five days of order direction, with FOB origin terms, meaning the contractor assumes all costs and risks until the goods are loaded at the origin. All items must be delivered to the Sierra Army Depot at 304N 4th Street, Herlong, CA 96113-5520, which serves as the point of delivery, inspection, and acceptance. The goods must be packaged and preserved in strict accordance with MIL-STD-2073-1E, using QUP 001, preservation method 33 (drying), and no special preservation material. Marking must comply with MIL-STD-129, including Data Matrix barcodes, with no special marking codes applied. Palletization must follow DLA’s RP001 packaging requirements. Shipments must be sent via the fastest traceable means, excluding parcel post. The contract incorporates numerous Federal Acquisition Regulation clauses, including those governing small business representation, employment eligibility, combating human trafficking, sustainable products, and cybersecurity safeguards under NIST SP 800-171. Offerors must provide a Unique Entity ID and CAGE code and self-certify their size and socioeconomic status, including potential small business, women-owned, or service-disabled veteran-owned status, with full disclosure required in joint ventures. Hazardous materials, if applicable, must be labeled per 29 CFR 1910.1200 and accompanied by pre-award Safety Data Sheets. Invoicing must be submitted exclusively through Wide Area WorkFlow using appropriate document types. The original required delivery date is July 9, 2026, and proposals must be submitted electronically via DIBBS by July 23, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R numbers, and all non-accepted supplies must have government identification removed prior to return. No options, contract modifications, or additional line items are specified, and the contract is administered under

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

NUT, SELF-LOCKING, HEThe contract specifies the procurement of a self-locking nut with the NSN 5310-01-717-8608, quantity of one unit, under solicitation SPE4A6-26-T-05LQ, with a delivery requirement of 20 days after delivery order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items must be physically marked according to specified guidelines. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. The item contains technical data subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and been formally approved. The solicitation was posted on July 12, 2026, with a response deadline of July 20, 2026, under NAICS code 332722, and is managed by the Department of Defense’s ASC Commodities Division with performance in Mechanicsburg, Pennsylvania. Primary point of contact is Charece Smith.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

NUT, SELF-LOCKING, SLOTTThis contract specifies the procurement of a self-locking, slotted hexagonal nut, identified by NSN 5310-00-785-1755 and part number MS17825-3, manufactured to meet the current revision of the governing military and consensus standards, including MIL-STD and NASM25027. The item is classified as a commercial item and is subject to stringent quality and technical requirements from the DLA Master List, including tailored quality provisions, inspection and acceptance at origin, and mandatory physical identification markings per MIL-STD-130N and RQ017. Acceptance criteria require zero non-conformances under zero-based sampling plans governed by MIL-STD-1916 or ASQ H1331, with specified verification levels for critical, major, and minor attributes. The item has no shelf life requirement, and government identification markings must be removed from non-accepted items. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 requirements, and each unit must be clearly marked with the NSN, contract number, lot number, and manufacturer and contractor CAGE codes. The contract awards two line items totaling 1,074 units, delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the point of manufacture. Delivery schedules are strictly defined with two distinct shipment timelines—one requiring shipment by December 3, 2026, for delivery to Tinker AFB, Oklahoma, and the other by February 9, 2027, for delivery to Texarkana, Texas, both following a 135-day delivery window from the solicitation date. All packaging and labeling must conform to DLA’s technical directives, overriding any conflicting commercial standards. The solicitation number is SPE4A6-26-T-05MV, issued by the Department of Defense’s ASC Commodities Division, with Deborah Jordan as the primary point of contact. The item is designated as a critical application component, and compliance with all referenced technical documents, including TDP Rev D Gen 4 and QAP EQ003, is mandatory for acceptance.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE