This Government Contract opportunity from Department Of Defense was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Flag Manufacturing & Stitching

Closed

Federal

Submission Closed05/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339950

New

SLED

Traffic Control Device Supplier

South Dakota State Government

POSTED

DEADLINE

Traffic Control Devices Annual

Solicitation # 26IFB19956

Solicitation 26IFB19956 is an Invitation for Bids issued by the South Dakota Office of Procurement Management for an annual contract to provide traffic control devices delivered within the state of South Dakota. The contract will be awarded to the lowest responsible and responsive bidder who meets all specified requirements. Bids must be submitted by September 24, 2026, via the electronic procurement system or as sealed paper submissions. The award process typically occurs within forty-five days of the bid opening. Supplies must be new, of current production, and delivered F.O.B. destination to specified South Dakota locations, generally within 30 days of order receipt. All unit prices must be net and include all transportation and delivery charges. Contractors are required to maintain general liability, workers compensation, professional liability, and automobile liability insurance. Compliance with the South Dakota Prompt Payment Act, the Civil Rights Act of 1964, and Executive Order 11246 regarding equal employment opportunity is mandatory. Payment and performance for succeeding fiscal periods are subject to the availability and appropriation of funds.

South Dakota State Government

POSTED

DEADLINE

Police Placards and American Flags

Solicitation # S26-0610

The Orlando Police Department has issued a Notice of Intent to Award a sole source contract, solicitation number S26-0610, for the procurement of custom PVC police placards and American flags. Federal Eastern International LLC has been identified as the exclusive authorized distributor for these products within the state of Florida, supported by authorization from Ready Line LLC. The solicitation was posted on September 10, 2026, and will remain active for seven calendar days. Any supplier capable of providing the same products must submit their qualifications and capabilities to the designated procurement agents, Jay Carr and Tracie Brown, by the deadline of September 17, 2026, at 5:00 p.m. ET.

Orlando Police Department

POSTED

DEADLINE

PLATE, IDENTIFICATION

Solicitation # SPE8E6-26-T-4583

Solicitation SPE8E6-26-T-4583 is a request for quotations issued by DLA Troop Support Construction and Equipment (Class IV) for the procurement of 20 identification plates. The required items are identified as Parker-Hannifin Corporation 82106 P/N 92948 with NSN 9905017340513. The delivery is required within 160 days, with a need ship date of March 1, 2027, and an original required delivery date of May 5, 2027. The items are to be delivered to the DLA Distribution Depot Hill at Hill AFB, Utah, with inspection and acceptance occurring at the destination. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and adheres to various technical and quality requirements, including RA001, RP001, RQ011, RC001, and RD003. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must follow RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is subject to the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DIBBS portal by September 21, 2026.

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, HIDALGO CO, LARGE SIGN REPLACEMENT

Solicitation # 6497-69-001_1026

The Texas Department of Transportation is soliciting bids for a state let maintenance contract focused on large sign replacement along IH0069 in Hidalgo County. The estimated cost for this project is 1,197,322.04 dollars. The solicitation, identified by number 6497-69-001_1026, was posted on September 10, 2026. Interested parties must submit their responses by the deadline of October 6, 2026.

Texas Department of Transportation

POSTED

DEADLINE

Digital LED Signage Supply

W7MT Uspfo Activity Alang 117

POSTED

DEADLINE

USAF Band Exhibit Booth

Solicitation # FA706026R0008

The Department of Defense is seeking a small business contractor to design, engineer, and deliver one complete 10-foot by 30-foot modular trade-show exhibit for the United States Air Force Band. This government-owned asset must feature a collapsible lightweight metal structure with replaceable tension-fabric graphics and a centrally positioned 75-inch class digital display system. The package includes custom reception furniture with lockable storage, integrated lighting, cable management, and durable shipping crates. The exhibit is designed for a minimum service life of seven years and must be deliverable to Joint Base Anacostia-Bolling or another National Capital Region location by November 30, 2026. Key performance requirements specify that the exhibit must be transportable in no more than three shipping units and assemblable by four trained personnel within eight labor hours. The contractor is responsible for project management, full staging, acceptance testing, personnel training, and providing comprehensive warranty support and replacement parts. This combined solicitation, identified as FA706026R0008, is set aside for small businesses under NAICS code 339950, with responses due by September 23, 2026.

FA7060 11TH Contracting Squadron Pk

POSTED

DEADLINE

Solicitation # W50S6M26QA017

The Department of Defense, specifically the W7MT Uspfo Activity Alang 117, is seeking a contractor for the procurement and installation of three digital signs to be located at the flight line, the medical building, and the front gate in Birmingham, Alabama. This combined contract, identified by solicitation number W50S6M26QA017, requires the supply of a complete digital signs package that includes all necessary controls, safety devices, documentation, and startup support. This opportunity is designated as a Total Small Business Set Aside under NAICS code 339950. Interested parties must submit their responses by September 22, 2026. The project is managed by the office located in Birmingham, Alabama, with primary coordination handled by Jonathan Werkmeister.

W7MT Uspfo Activity Alang 117

POSTED

DEADLINE

ARFQ-0809-TPK2700000007-2 | Extruded Aluminum Sign Panels for WVPA

Solicitation # ARFQ-0809-TPK2700000007-2

The West Virginia agency is seeking solicitations for the procurement of extruded aluminum sign panels under solicitation number ARFQ-0809-TPK2700000007-2. This SLED organization project is managed by the state of West Virginia, with Wesley D Vandall serving as the primary point of contact for inquiries. The solicitation was posted on September 10, 2026, and requires a formal response by the deadline of September 16, 2026, at 2:30 PM. Interested parties can find further details and submission instructions through the official West Virginia Oasis portal.

POSTED

DEADLINE

Installation of Digital Signage Displays for All Sites

Solicitation # ITB-2026-0002

The Pawtucket Housing Authority is seeking bids for the installation of digital signage displays across five different sites: Fogarty Manor, Kennedy Manor, Burns Manor, St Germain Manor, and Galego Court. A pre-bid meeting and site visit are scheduled for September 16th, starting at Fogarty Manor. Any questions resulting from this meeting must be submitted in writing by September 18, 2026, to be considered for potential addenda issued on September 21, 2026. All bids must be submitted in a sealed envelope addressed to Alissa Stipa at the Fogarty Manor location by September 28, 2026, at 10:00 AM EST. Submissions will be publicly opened and read aloud at the Fogarty Manor Community Room. For further information or requests for clarification, interested parties should contact the Capital Projects Coordinator, Alissa Stipa, via email, allowing at least 48 hours for a response.

Pawtucket Housing Authority

POSTED

DEADLINE

Solicitation # SPE1C1-26-Q-0493

This contract is a firm fixed price solicitation for the procurement of 100 acrylic signal pennants, specifically Type I Class 1A heading, with a hoist of 4 feet 7 inches and a fly of 9 feet 4 inches. The items must be manufactured in accordance with drawing 16696-12C and specification MIL-DTL-2692K. Delivery is required 193 days after order award, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to quality and technical requirements, including the submission of two first article samples for visual, dimensional, and shade examination. Key compliance standards include the prohibition of mercury compounds in packaging and preservation, the maintenance of supply chain traceability documentation, and adherence to CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

POSTED

DEADLINE

Solicitation # SPE1C1-26-Q-0464

This contract is a firm fixed price solicitation for the procurement of 60 acrylic bunting signal pennants for Jewish worship. The items must be manufactured according to specification MIL-DTL-2692 and drawing 16696-9D, featuring a hoist of 2 feet 11 inches and a fly of 8 feet 8 inches. Delivery is required within 199 days after the order is placed, with both inspection and acceptance occurring at the destination. The contractor is required to submit two first article samples for visual, dimensional, and shade examination, with a 30-day evaluation period for government approval. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The procurement is managed by the Department of Defense through the C and T Supply Chain, with shipping directed to Arizona Industries for the Blind.

C AND T SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

This contract involves the precise manufacturing, sewing, and assembly of signal pennants with specific dimensions of 3 feet 5 inches in hoist and 6 feet 11 inches in fly. The work includes detailed tasks such as hemming, reinforcement, and the installation of grommets, ensuring the final products meet exact specifications. The contract is a subcontract opportunity posted by C AND T SUPPLY CHAIN under the Department of Defense, with a solicitation issued on May 19, 2026, and responses due by May 27, 2026. The contract falls under the NAICS code 339950, which relates to the manufacturing of signs and related products, indicating a specialized production process. While some organizational and location details are unspecified, the scope clearly targets the supply of high-quality, durable signal pennants, likely intended for official or operational use. The opportunity is accessible through the Defense Logistics Agency’s bidding system, emphasizing its government procurement context.

General Info

Manufacture and assembly of precise signal pennants for Department of Defense subcontract opportunity.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

339950 - Sign ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-26-Q-0271.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PENNANT, SIGNAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 19

subcontract

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → C AND T SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Cut, sew, and assemble signal pennants per exact dimensions (3 ft. 5 in. hoist by 6 ft. 11 in. fly), including hemming, reinforcement, and grommet installation.