This Government Contract opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Gear Manufacturing and Supply

Closed

Federal

Submission Closed07/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993

New

Federal

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a solicitation issued by the U.S. Army Contracting Command Rock Island at Picatinny to develop a manufacturable cargo-carrying artillery projectile system. This effort is being conducted via a Prototype Other Transaction Agreement (OTA) under 10 U.S.C. 4022, with the government intending to award up to two agreements. The project is divided into two phases: Phase I focuses on projectiles with a range of 30 to 35 km, while Phase II targets ranges beyond 35 km. The ultimate goal is to support a Milestone C production decision by the fourth quarter of FY29, with potential follow-on production of up to 10,000 systems per year. The procurement process has been refined through several amendments, most notably Amendment 0005, which corrected schedule discrepancies by aligning milestones to relative durations after award and updating the Statement of Work and CLIN Matrix. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in four distinct volumes. Evaluation is based on schedule and technical merit, with schedule being the primary factor for Phase I and technical capability being the primary factor for Phase II, alongside cost and price. Technical requirements specify compatibility with M777A2 and M109A7 39-caliber weapon platforms, as well as legacy propellant systems. Deliverables include various quantities of engineering, safety, and soldier testing projectiles, as well as critical design reviews and technical reports. Due to the sensitive nature of the technology, offerors must comply with strict non-disclosure agreements and provide specific certifications, including Business Status Certifications and DD2345 Military Critical Technical Data Agreements, to access controlled technical data. All materials must adhere to the Buy America Act and International Standards for Phytosanitary Measures for wood packaging.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS

Solicitation # AMIP-CSO

The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize ammunition manufacturing capabilities. The primary objective is to integrate advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile, resilient, and sustainable industrial base. Key focus areas include accelerating technology adoption, leveraging IoT and digital twins for predictive maintenance, and improving supply chain transparency and workforce capabilities, all while ensuring strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, this solicitation allows for awards via fixed-price contracts or Other Transaction Agreements, with typical periods of performance ranging from two to five years and funding intended for Fiscal Year 2026. The selection process is phased, beginning with the continuous submission of unclassified white papers and quad charts, followed by pitch sessions and formal technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Large business offerors are required to provide detailed subcontracting plans for various small business categories.

POSTED

DEADLINE

Solicitation # (blank)

The Department of Defense is seeking industry input to transform the operating strategy for Government-Owned, Contractor-Operated Army ammunition plants. The goal is to move away from traditional models that overemphasize government-directed workload and instead establish a commercially disciplined operating model. This new approach aims to grant contractors greater flexibility and responsibility for facility maintenance, modernization, workforce development, and the pursuit of approved non-government workload to ensure long-term viability and responsiveness to Warfighter requirements. The government is requesting feedback on several critical areas, including risk allocation, demand and capacity management, and the implementation of flexible, automated production capabilities. Key considerations involve developing performance-based oversight, determining intellectual property rights, and creating contract structures that incentivize continuous improvement and surge capacity. Interested parties are invited to provide recommendations via a questionnaire by October 16, 2026, in preparation for an Industry Day scheduled for November 2026.

POSTED

DEADLINE

RFB-758-2700000075-1 | Ammunition and Munitions

Solicitation # RFB 758 2700000075

Request for Bid RFB 758 2700000075 is a solicitation issued by the Commonwealth of Kentucky Office of Procurement Services to establish a Master Agreement for Ammunition and Munitions. The scope of the procurement includes the acquisition of ammunition, firearms, chemical irritants, and non-lethal training ammunition. Bids must be submitted electronically through the Kentucky Vendor Self-Service portal by October 14, 2026, at 1:30 PM ET. For the electronic submission, vendors are instructed to enter a nominal value of 0.01 in the system, while actual pricing must be detailed on the provided Bid Sheet. The procurement is categorized under NAICS code 332993. Primary point of contact for this solicitation is Nathan Durham. While the solicitation is for munitions, the associated administrative guidelines for Kentucky state contracts emphasize compliance with state and federal regulations, including requirements for insurance, performance and payment bonds, and adherence to the Kentucky Equal Employment Act of 1978. All responses must be submitted via the official eProcurement system to be considered responsive.

Office of Procurement Services

POSTED

DEADLINE

Solicitation # N0010425QNC18

Solicitation N00104-25-Q-NC18 is a total small business set-aside for the procurement of three clamping rings (NSN 1350-01-671-1961) for the Department of Defense, specifically NAVSUP Weapon Systems Support. The requirement is issued under Emergency Acquisition Flexibilities and carries a DO priority rating for national defense. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The resultant contract will be issued bilaterally, requiring written acceptance from the contractor. Technical requirements mandate that the items meet the specifications of drawing 6964634, cage 53711, and be physically identified per MIL-STD-130. The contractor must maintain an ISO 9001 quality system and adhere to strict mercury-free material requirements for use on submarines and surface ships. Quality assurance includes mandatory non-destructive First Article Testing (FAT) and Production Lot Testing, with one unit of each delivered to Naval Station Newport for government approval. Supplies must be preserved and marked according to MIL-STD-2073-1 and MIL-STD-129, including specific blue and yellow DLR labels for applicable items. The solicitation has undergone multiple amendments, extending the quote due date several times, with the most recent updates shifting the point of contact to Zachary R. Morrill. Payment will be processed through Wide Area Workflow (WAWF) using combined invoice and receiving reports. The contractor is granted a one-year warranty from the date of delivery for these non-complex supplies.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # W519TC-26-Q-A220

Army Contracting Command - Rock Island issued solicitation W519TC-26-Q-A220 for a single firm-fixed-price Indefinite Delivery Indefinite Quantity (IDIQ) contract to procure 81mm Drogue Plates and Rear Support Plates. This total small business set-aside contract consists of one base year and two ordering periods. The government has established a guaranteed minimum of 5,000 Drogue Plates and 6,800 Rear Support Plates, with maximum contract ceilings of 28,000 and 20,400 units, respectively. Award will be granted to the responsive, responsible, and lowest-priced offer based on the total evaluated price, which includes both production and first article testing costs. The contractor must deliver a first article testing lot of 15 units for each item within 90 days of contract award, with full production deliveries commencing 60 days after first article acceptance. All items must be manufactured according to specific restricted drawings and delivered FOB Destination to Pine Bluff Arsenal in Arkansas. Key compliance requirements include MIL-STD-130 for unique item identification, MIL-STD-129 for shipment labeling, and adherence to DFARS regulations regarding the Buy American program and the prohibition of hexavalent chromium. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # W519TC-27-R-AM82

The Army Contracting Command Rock Island is seeking proposals for the supply of M82 Energetics Parts, specifically Booster Bursters, Delay Assemblies, and Slider Assemblies, to support the M82 Program at Pine Bluff Arsenal. This anticipated procurement will be a five year, firm fixed price, indefinite delivery indefinite quantity contract awarded to the responsive and responsible lowest priced technically acceptable proposal. Estimated quantities over the life of the contract range from a minimum of 65,000 units to a maximum of 90,000 units for each primary component, including corresponding first article testing units. The minimum guarantee will be obligated through the first delivery order issued alongside the base contract. This opportunity is open for competition with no specific set aside.

POSTED

DEADLINE

TREX: Drone Killer Cartridge Training Device

Solicitation # 24491

The TREX Drone Killer Cartridge Training Device solicitation, identified by number 24491, was posted on September 15, 2026. This opportunity is categorized as a solicitation for a training device designed for drone killer cartridges. Interested parties must submit their responses by the deadline of October 14, 2026. Further details and application instructions can be accessed through the provided link to the active and upcoming research and development opportunities page.

POSTED

DEADLINE

MLU-68 Forward Assembly Initiator Unit SupplyThis subcontract with the Department of Defense involves the supply of MLU-68 Forward Assembly Initiator Units to prime contractors for munitions production projects. The selected provider is responsible for sourcing or manufacturing the initiator units, which include specialized housing and initiator components, and performing all necessary quality inspections to ensure strict conformity to technical specifications. To qualify for this requirement, the contractor must hold ISO 9001 or AS9100 certification. The work will be performed at Hill Air Force Base, and the response deadline for this opportunity is October 15, 2026.

POSTED

DEADLINE

BLU-138/B Fuze System

Solicitation # FA821326RA5KF

The Air Force Life Cycle Management Center Armament Directorate is conducting market research via a sources sought notice to identify qualified contractors for the procurement of the BLU-138/B Fuze System. This system is critical for the 5,000-pound class conventional penetrating weapon used to defeat very hard and deeply buried targets. The scope of work includes the production of the MLU-68 Forward Assembly Initiator Unit, FSU-32/B Electronic Safe and Arm Module, FZU-60/B Bomb Fuze Initiator, high-reliability interconnect system cabling, and M548 ammo cans with custom damping inserts. The government is specifically seeking feedback on the feasibility of a small business set-aside under NAICS 332993 and is considering an Indefinite Delivery Indefinite Quantity (IDIQ) contract structure. Potential providers must demonstrate the ability to independently generate a Technical Data Package and ensure all hardware is qualified according to MIL-STD-1316 for fuze design safety and MIL-STD-331 for environmental and performance tests. Additionally, contractors must maintain ISO 9001 or AS9100 quality assurance certifications and implement proactive dimenishing manufacturing sources and material shortages (DMSMS) management for critical electronic components. Interested parties must submit a capability statement by October 15, 2026, detailing their socioeconomic status, relevant experience within the last three years, and any foreign ownership or involvement. Small business prime contractors are reminded that they must perform at least 50 percent of the work in accordance with FAR 52.219-14.

POSTED

DEADLINE

FMU-167/B Hard Target Void Sensing Fuze (HTVSF) System

Solicitation # FA821326FMU167

The Air Force Life Cycle Management Center Armament Directorate is conducting market research to identify qualified sources for the manufacture, assembly, testing, and delivery of the FMU-167/B Hard Target Void Sensing Fuze (HTVSF) system. This effort, categorized under NAICS 332993, aims to determine market competitiveness and the feasibility of a small business set-aside. The required system must be capable of penetrating reinforced concrete or multiple soil layers and include void sensing, time delay, and backup timer functions selectable via cockpit mission planning systems. Key deliverables include the FMU-167 fuze, FZU-60/B bomb fuze initiator, JDAM adapter cabling, and M548 ammo cans for shipping and storage. Because the government does not possess the proprietary Technical Data Package from Northrop Grumman, potential contractors must demonstrate the ability to independently develop and qualify an equivalent system. Technical requirements include a minimum production capacity of 3,000 units per year, adherence to MIL-STD-1316 and MIL-STD-331 standards, and ISO 9001 or AS9100 quality certification. Interested parties must submit a capability statement by October 15, 2026, detailing their technical approach, production capacity, and supply chain management strategies. Small business prime contractors are expected to perform at least 50 percent of the manufacturing cost, excluding materials.

POSTED

DEADLINE

155mm Artillery Cannister Assembly

Solicitation # W15QKN-26-X-1CJZ

The Army Contracting Command-Rock Island at Picatinny, acting for the Office of the Project Manager for Combat Ammunition Systems, is conducting a sources sought market survey under solicitation W15QKN-26-X-1CJZ. The government is seeking potential sources within the National Technology Industrial Base capable of manufacturing and delivering 155mm Artillery Cannister Assemblies. This assembly consists of four primary components: a 4140 steel payload canister, a 7075 T6 aluminum payload cover, and two types of clocking keys made from AISI S2 or S7 tool steel. The government has established aggressive production scaling requirements, starting with at least 450 units per year by October 2027, increasing to 1,000 per year by March 2028, and reaching a minimum of 10,000 units per year by January 2031. This notice is for informational and planning purposes only and does not constitute a Request for Proposal or a commitment to award a contract. Interested sources must be registered in the System for Award Management and provide a detailed capability statement covering their manufacturing experience, facility specifications, quality management systems, and current production capacity. Access to the Distribution D Technical Data Package is restricted to Department of War contractors and requires the submission of a signed DD Form 2345, a Technical Data Request Questionnaire, and a Non-Disclosure Agreement. All inquiries must be directed via email to the designated points of contact, Cameron Sacco and Christopher Brown.

W6QK Acc-Ri-Picatinny

POSTED

26 days ago

DEADLINE

in 1 day

AI Contract Overview

The contract requires the manufacture and supply of three precision spur gears, identified by NSN 3020017016667 and part number 506-30-24, to meet stringent military specifications. Full compliance documentation and complete material traceability must be provided for each unit, ensuring adherence to defense quality and accountability standards. The work is classified as a subcontract under NAICS code 332993, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 15, 2026, with responses due by July 20, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. All deliverables must align with the rigorous requirements of military procurement, emphasizing precision, consistency, and verifiable provenance throughout the manufacturing process.

General Info

Manufacture and supply three precision gears per military specs with full traceability to New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-8824.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GEAR, SPUR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 15

subcontract

Response DeadlineJul 20

Deadline has passed

Submission Closed

07/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of 3 units of a spur gear (NSN: 3020017016667, P/N: 506-30-24) to military specifications, including full compliance documentation and traceability.