Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Metal Tubing Manufacturing

Active

Federal

Response Deadline09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Fluid Handling Division of the Department of Defense is seeking a subcontractor for the precision manufacture of Class 1 metallic tubing. The required specifications include a 0.250 inch outer diameter and 0.020 inch wall thickness, utilizing straight-seamed, corrosion and heat-resistant steel conforming to SAE AMS5561H standards for use in high-pressure hydraulic applications. This procurement opportunity is categorized under NAICS code 331210 and is slated for performance in San Diego, California. Interested parties must submit their responses by the deadline of September 4, 2026.

General Info

DoD seeks subcontractor for Class 1 metallic tubing manufacture in San Diego by 9/4/2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-363X.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, METALLIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 24

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 0.250" OD, 0.020" wall thickness, straight-seamed, Class 1 metallic tubing from corrosion and heat-resistant steel (SAE AMS5561H) for high-pressure hydraulic applications.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M4-26-T-333A

This contract is for the procurement of 453 feet of metallic carbon steel tubing (1020) with a 1.000 inch outer diameter and 0.095 inch wall thickness. The tubing must be provided in random lengths between 12 and 24 feet and manufactured according to electric-resistance-welded carbon and alloy steel mechanical tubing specifications, specifically ASTM A513-06B. The order allows for a quantity variance of plus or minus 10 percent and requires delivery to DLA Distribution Red River in Texarkana, Texas, with a required delivery date of February 16, 2027. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The supplier must provide metal certifications via CDRL-METALSCERT and adhere to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. This procurement is conducted under full and open competition and incorporates technical and quality requirements from the DLA Master List.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-17KF

Solicitation SPE4A6-26-T-17KF is a total small business set-aside issued by the DLA Aviation ASC Commodities Division for the procurement of 806 feet of electrical insulation sleeving, identified by NSN 5970-01-105-6535. The requirement is for a source-controlled item that must be manufactured and tested according to cited limited rights data. Delivery is required to DLA Dist San Joaquin in Tracy, California, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. The procurement specifies a delivery period of 159 days and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Compliance requirements are stringent, including adherence to the Buy American Act and the Berry Amendment. The item is subject to export control under ITAR or EAR regulations, requiring bidders to have an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. Additionally, the contract mandates CMMC Level 2 certification and prohibits the use of additive manufacturing unless specifically authorized. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with destination inspection and acceptance governed by FAR 52.246-2.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

TUBE ASSEMBLY TRANS

Solicitation # SPE7M4-26-T-331B

This contract, identified as SPE7M4-26-T-331B, is a solicitation by the Department of Defense Fluid Handling Division for the procurement of one Tube Assembly Transfer, part number 7300436 from JLG Industries, Inc. The item is identified by NSN 4710-01-508-3497. Delivery is required within 10 days after receipt of the order, with a required delivery date of August 7, 2026. The shipment is to be delivered FOB Origin and will be accepted and inspected at the destination in Cherry Point, North Carolina. The contractor must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, while following the DLA Master List of Technical and Quality Requirements. A strict prohibition is placed on the use of Class I ozone-depleting chemicals in the production of the items. Shipping must be conducted via the fastest traceable means, and the use of parcel post is explicitly forbidden.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

TUBE, BAG SUPPORT

Solicitation # SPE7M4-26-T-337R

Solicitation SPE7M4-26-T-337R is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of seven bag support tubes, identified by NSN 4710-01-241-3035. The items must be manufactured in accordance with Technical Data Package Rev A Gen 1, specifically basic drawing 78286 65751-03007 revision F and reference drawing 78286 65751-03007. The procurement is open for full and open competition, with a price evaluation preference provided for certified HUBZone small businesses. Delivery is required within 241 days, with a need ship date of April 23, 2027, and terms set as FOB Origin. Inspection and acceptance will also occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow RP001 requirements. The items are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Invoicing and payment processing are required electronically through the Wide Area Workflow system.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-03B7

This contract is for the procurement of 120 feet of seamless or welded copper-nickel alloy metallic tubing, specifically 90-10 composition, with a 4-inch outer diameter and 0.095-inch wall thickness. The material must be annealed and conform to military specifications for copper-nickel alloy tubes, with random lengths between 12 and 20 feet. The order allows for a quantity variance of plus or minus 10 percent and requires delivery to the DLA Distribution New Cumberland facility by January 4, 2027. Strict compliance is required regarding environmental and marking standards, including the prohibition of Class I ozone-depleting chemicals and the restriction of mercury compounds. Each length of material must be continuously marked every three feet with the producer's name, specification, composition, size, contract number, national stock number, heat or lot number, and a designation for seamless or welded construction. Quality assurance will be managed through specific sampling methods and metal certification requirements, with packaging and preservation adhering to MIL-STD-2073-1E and MIL-C-3993.

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

TUBE AND FITTINGS, META

Solicitation # SPE4A5-26-T-364A

Solicitation SPE4A5-26-T-364A is a fixed-price request for quotations issued by DLA Aviation, ASC Supplier Oper OEM Division, for the procurement of 31 units of metallic tubes and fittings, identified by NSN 4710-01-371-9562 and Honeywell part number 3883489-1. This requirement is designated as a critical application item, necessitating bare item marking per RQ017. The original required delivery date is March 7, 2027, with a delivery window of 171 days after award. Shipping and acceptance are both set at the destination, specifically DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-H-775 for hose preservation, and MIL-STD-2073-1E for packaging data. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act and the Berry Amendment is required, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and various FAR and DFARS clauses regarding cybersecurity, human trafficking, and hazardous material identification.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Solicitation # W911S226U4133

The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is seeking responses for solicitation W911S226U4133 regarding the procurement of steel tubes. This opportunity is designated as a total small business set-aside under NAICS code 331210. The solicitation was posted on August 26, 2026, and the extended deadline for responses is September 11, 2026, at 9:00 PM. Interested parties should contact Cindy Jepsen as the primary point of contact for further information.

W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

Metallic Tube Supply (NSN: 4710-00-344-4714)

Defense Logistics Agency

POSTED

DEADLINE

Domestic Material Supply for Trigger Components

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-365M

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7M4-26-T-365M for the procurement of 144 metallic tubes. This federal requirement is identified by NSN/Part Number 4710-00-344-4714 and is tracked under purchase request 7017984727. The solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

STRAINER ELEMENT, SEDIMENT

Solicitation # 70Z08026P21105B00

The United States Coast Guard Surface Forces Logistics Center is seeking quotations for 20 sediment strainer elements, specifically the Monel strainer basket for 3 inch Model 53 BTX duplex strainers, manufactured by Hayward Industrial Products under part number ST553MJXX. This is a firm fixed price contract to be awarded on an all or none basis to the lowest price technically acceptable offeror. The brand name part is mandatory, although alternate products may be considered if they meet the specified physical and functional characteristics. Delivery is required F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, Maryland. Strict adherence to packaging and marking requirements is mandatory, as items not individually packaged according to MIL-STD-2073-1E and marked per MIL-STD-129R will be rejected by the warehouse. Offerors must be registered in the System for Award Management and provide a Tax Information Number with their quote. The solicitation falls under NAICS code 331210 and requires the submission of specific disclosures regarding foreign incorporated entities and inverted domestic corporations. Quotations must be received by August 31, 2026, at 10:00 am Eastern Standard Time.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-363X

This contract is for the procurement of high-pressure hydraulic metallic tubing made of corrosion and heat-resistant steel. The tubing must have a 0.250 inch outer diameter, a 0.020 inch wall thickness, and be straight seamed Class 1 with random lengths between 12 and 24 feet, adhering to SAE AMS5561H specifications. The total requirement is split into two line items totaling 960 feet, with 279 feet destined for DLA Distribution San Diego and 681 feet for DLA Distribution Warner Robins. Compliance requirements include strict adherence to MIL-STD-129 for marking and RP001 for packaging. The contract prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Quality assurance will be managed via sampling methods according to MIL-STD-1916 or ASQ H1331, and metal certification data must be provided via the specified CDRL. Delivery is required within 175 days, with a quantity variance allowance of plus or minus 10 percent.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

FITTING, LUBRICATION

Solicitation # SPE7M3-26-T-8188

This contract is for the procurement of one lubrication fitting, identified by NSN 4730011729119 and part number 41002974 from PTI Technologies Inc. The order is managed under solicitation SPE7M3-26-T-8188 by the Department of Defense Fluid Handling Division, with a required delivery date of August 14, 2026, and a delivery window of 20 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Key compliance requirements include CMMC Level 2 self-assessment and the protection of covered defense information. The item is to be shipped FOB Origin to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

SEAL, CONICAL, FLARED TU

Solicitation # SPE7M3-26-T-8152

The contract specifies the procurement of SEAL, CONICAL, FLARED TUBE FITTING, identified by part number AS4824A16 and NSN 4730-01-538-3942, to be supplied in accordance with SAE AS4824B (R2015) standards and guided by Technical Data Package Rev A Gen 2. The item is designated as a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements via R or I numbers. Each package contains two units (1 PG = 2 EA), and the conical seals must remain enclosed in their protective plastic round vials during shipment to prevent crushing; removal is expressly prohibited. Packaging must comply with MIL-STD-2073-1E, including specific parameters such as QUP 001, preservative method 10, Class 1 drying, and wrapping material ZZ. Marking is required per MIL-STD-129 with the designation “1 PG (2 EA)” and no special marking code. The contract mandates origin inspection and acceptance under FAR 52.246-2 and permits Certificate of Conformance procedures per FAR 52.246-15 unless overridden by a Quality Assurance Letter of Instruction. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval unless authorized by the specification. All deliveries must be FOB Origin with an 88-day delivery window from the need ship date of August 6, 2026, to the original required delivery date of March 12, 2027. The requirement is for 453 packages (906 units), and the full and open competition is not set aside for small businesses. The contract imposes multiple DFARS and FAR clauses governing cybersecurity, safeguarding defense information, prohibitions on hexavalent chromium and covered telecommunications equipment, whistleblower protections, and restrictions on subcontracting under FAR 52.219-14 with deviation 2021-00008. Non-domestic material requires disclosure, additive manufacturing is prohibited, and no Fast Pay applies. All quotes must be submitted via DIBBS prior to the response deadline of August 21, 2026. Payment will be processed electronically through WAWF, and the point of contact for administrative and procurement matters is

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8633

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 197 steel pipe elbows featuring a 45 degree flow angle and 1-1/2 inch nominal pipe size with female NPSM threaded swivel nuts and male NPTF threads, adhering to SAE hydraulic tube fitting standards. The contract, identified by solicitation number SPE7M3-26-T-8633 and NSN 4730-00-725-3705, requires delivery within 160 days after receipt of order. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a C3PAO. Additionally, the item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Eligible contractors must have an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7M4-26-Q-1001

This contract is for the procurement of 121 tube assemblies for the H-53 helicopter, identified as a Navy Critical Safety Item and a critical application item. The requirement is a restricted source item necessitating engineering source approval by the government design control activity. Delivery is set for 490 days after receipt of order, with inspection and acceptance occurring at the origin. The contractor must adhere to strict quality and security standards, including CMMC Level 2 self-assessment, SAE AS9100 higher-level quality requirements, and the prohibition of class I ozone depleting chemicals. Packaging and marking must comply with MIL-STD-129 and DLA procurement requirements. All waivers or deviations require approval from the DSC contracting officer, and the contract includes provisions for government first article and production lot testing.

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-337H

Solicitation SPE7M4-26-T-337H is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 248 nonmetallic hose assemblies, identified by NSN 4720017030478. This is a total small business set-aside under NAICS code 326220. The required delivery date is February 18, 2027, with a delivery window of 177 days. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including the prohibition of class I ozone depleting chemicals and additive manufacturing unless specifically authorized. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Contractors are required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-339B

Solicitation SPE7M4-26-T-339B is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two nonmetallic hose assemblies, identified by NSN 4720-01-379-5428. This is a Foreign Military Sales requirement for Taiwan, with the final delivery destination being the Parts-Attach General Depot in Tainan City. The required delivery date is August 18, 2026, with a delivery period of five days after receipt of order. Inspection and acceptance are both designated to occur at the point of origin. The contract mandates strict adherence to technical and quality requirements via RA001 and packaging standards under MIL-STD-2073-1E and RP001. Marking must comply with MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with domestic material restrictions, including the Buy American Act and Berry Amendment, and adhere to cybersecurity standards under DFARS 252.204-7012.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-335N

Solicitation SPE7M4-26-T-335N is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 11 units of Hose Assembly, Nonme, identified by NSN 4720-01-549-1464 and CNH Industrial America LLC part number 87418552. The requirement is categorized under NAICS code 326220. The need ship date and original required delivery date are both set for March 10, 2027, with a delivery lead time of 197 days after order. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Payment must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various federal and defense acquisition regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Quotations were due by August 24, 2026, and should be submitted to the issuing office in Columbus, Ohio.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-332L

This contract is for the procurement of 11 kits of nonmetallic hose assemblies, identified by NSN 4720013894264 and part number 83001-225 from Hydraulics International, Inc. The agreement is a total small business set-aside under the Department of Defense Fluid Handling Division. Delivery is required within 187 days, with a need ship date of February 28, 2027, and a final required delivery date of April 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical requirement is the prohibition of Class I ozone-depleting chemicals in the manufacturing process. Additionally, the items are designated as Type I with a non-extendable shelf life of 120 months, requiring detailed shelf-life markings on all packaging and unpacked items. Inspection and acceptance will take place at the destination.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

RETAINER, PACKING

Solicitation # SPE7M4-26-T-329R

The contract pertains to the procurement of 1,758 units of RETAINER, PACKING with NSN 5330-00-419-2969 under solicitation SPE7M4-26-T-329R, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The retainer must be manufactured to the current revision of its governing part standard, and prior iterations of the standard are acceptable for historically produced hardware, but all new production must adhere to the latest standard. The item is subject to stringent material restrictions: no asbestos as defined in FED-STD-313 is permitted, and mercury or mercury-containing compounds must not be intentionally added or come in direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The supplies must be delivered within 63 days of award to Tracy, California, with a response deadline of August 21, 2026, and the procurement is fully competitive under a federal specification. Point of contact for inquiries is Freddie Vazquez at the provided email and phone number.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7M3-26-T-8174

This contract is for the procurement of three sediment strainer screen assemblies used for debris detection in combiner and engine transmissions. The items are identified by NSN 4730-01-112-3061 and correspond to Boeing part number 145DS516-2 and Eaton Aerospace part number A8759. This is designated as a critical application item, requiring strict adherence to calibration standards and tailored higher level quality requirements. The agreement mandates that no Class I ozone depleting chemicals be used in the production or delivery of the items. Delivery is set for the DLA Distribution New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA procurement requirements. The original required delivery date is July 29, 2027, with a final need ship date of February 4, 2028.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

SCREEN ASSY, INLET

Solicitation # SPE7M4-26-Q-1000

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 16 units of an inlet screen assembly, identified by NSN 1560-01-471-8483. The components must adhere to Bell Helicopter Textron Inc drawings, with Eaton Aerospace LLC listed as the approved source under part numbers 2H6840 and 901-345-541-101. The required delivery timeframe is 180 days after the order is received. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a certified third-party assessment organization. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Fabricated Structural Metal Manufacturing

POSTED

about 7 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-330K

This contract is a solicitation for the procurement of two metal tube assemblies, identified by NSN 4710-12-332-0798, for the Department of Defense Fluid Handling Division. The requirement is a total small business set-aside with a delivery timeline of 150 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and the items are designated as critical application components. Specific part numbers associated with J.P. Sauer Sohn Maschinenbau GmbH and Sauer Compressors USA are referenced for the assembly.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE