Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Metal Washer Manufacturing & Supply

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture or supply of a single precision flat washer identified by NSN 5310015006928, designed for critical military applications and governed by strict military specifications. The washer must meet exacting standards for material composition, dimensional tolerances, and surface finish to ensure reliability and performance under demanding operational conditions. The item is intended for use in systems where failure is not an option, necessitating rigorous quality control and adherence to technical requirements throughout the production process. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The place of performance is designated as FPO with a ZIP code of 96694, indicating delivery to a military mail facility, likely for overseas or expeditionary operations. The NAICS code 332321 confirms the scope is within the manufacture of forged and stamped metal products, aligning with precision metalworking capabilities required to fulfill the specification. Contractors must be prepared to meet defense procurement standards, including documentation and inspection protocols, without any set-aside provisions specified.

General Info

Manufacture precision flat washer NSN 5310015006928 per military specs for DoD, delivery to FPO 96694 by August 3, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

FPO, AP, 96694, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of one precision flat washer (NSN 5310015006928) meeting military specifications for critical application use, including material composition, dimensional tolerances, and surface finish.

Similar Contracts

Same NAICS industry code

DOOR ASSEMBLYThe contract pertains to the procurement of 15 door assemblies identified by NSN 3510-01-147-5525, with delivery required within 90 days after award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except in specific exempted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, with portable mercury-containing devices required to feature shock-proof construction and a secondary containment boundary as mandated by NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129K, replacing MIL-L-61002 requirements as waived by DGSC, while avoiding plastic packaging materials where contractually permissible. The delivery destination and freight shipping address is DLA Distribution San Diego, with inspection and acceptance occurring at the destination. The contract prohibits the inclusion of government identification on non-accepted supplies and mandates that all packaging and labeling meet DLA’s procurement standards. The solicitation number is SPE8ED-26-Q-0632, with a response deadline of August 5, 2026, and the required delivery date is November 8, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

BFSU's Fire Won-Door RepairsThis is a Sources Sought notice issued by the Billings Area Indian Health Service under the Department of Health and Human Services to identify qualified Indian Economic Enterprises (IEEs) capable of performing repairs and replacements on a specialized fire-rated sliding door at the Blackfeet Service Unit in Browning, Montana. The requirement is governed by the Buy Indian Act (25 U.S.C. 47) and HHSAR 326.601, which mandate a mandatory set-aside for IEEs and prohibit conventional competitive bidding unless the use of this authority is not authorized or practicable. The NAICS code 332321 applies, with a size standard of 750 employees, though size status is not used for eligibility determination—only IEE compliance is required. To qualify as an IEE, the business must be at least 51% owned by Indians, Federally Recognized Indian Tribes, or Alaska Native Corporations; Indian owners or tribes must receive at least 51% of the contract’s earnings; and daily operations and management must be controlled by one or more individuals who are Indians. The scope of work includes replacing and installing specific structural and mechanical assemblies of the fire-rated door, such as the lead post assembly, leading edge safety member, diagonal structural bar, outrigger trolley mechanism, and train guide trolley mechanism, adhering strictly to the original equipment manufacturer’s specifications and complying with The Joint Commission and NFPA 101 Life Safety Code standards for healthcare facility compartmentalization. Respondents must submit a detailed capability statement along with the mandatory Buy Indian Act Indian Economic Enterprise Representation Form. Generic submissions are rejected; responses must directly demonstrate experience in meeting similar technical demands, provide specific past contract examples, and fully substantiate compliance with all IEE criteria, including ownership structure, earnings distribution, and Indian control of operations. If partnering with a subcontractor, the prime entity must clearly show how the combined entity meets the 51% earnings threshold and retains operational control. Participation is open to Indian Small Business Economic Enterprises (ISBEEs) and other IEEs, but all must be registered in SAM with a current Unique Entity ID. All responses must be emailed to Shannon.Connelly@ihs.gov no later than August 2, 2026, with the Sources Sought ID SS-75H70926BAO_081 in the subject line. The notice does not provide contract value, pricing, delivery schedules

Billings Area Indian Health Svc

POSTED

DEADLINE

DOOR, ACCESS RADIATOR - ref 2099990

Dallas Area Rapid Transit

POSTED

DEADLINE

Commercial Fastener Supply – Hex Cap ScrewsThe contract calls for the supply of eight off-the-shelf hex cap screws that must fully comply with military specifications, requiring sourcing exclusively from authorized manufacturers to ensure authenticity and performance standards. Full traceability is mandatory throughout the supply chain, from production to delivery, with detailed documentation to verify origin, material composition, and conformance to required military standards. Packaging must meet strict protective and labeling guidelines to preserve integrity during transit and storage, ensuring all components remain free from damage, contamination, or misidentification. Delivery must be completed in compliance with the contract timeline and specifications, with the place of performance designated as Twinsburg, Ohio, under the oversight of the Department of Defense’s Aviation Supply Chain ESOC Buys office. The solicitation, posted on July 26, 2026, requires responses by August 3, 2026, and is classified as a subcontract under NAICS code 332321, targeting specialized fastener providers with proven capability in defense-grade component supply.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

STOP SHIM Manufacturing and DeliveryOne STOP SHIM with NSN 1650-00-467-9002 must be manufactured, quality assured, packaged, marked, and delivered in full compliance with applicable military specifications, with all work completed and shipped FOB origin within five days of contract award. The requirement is part of a subcontract under NAICS code 332321, issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, with performance scheduled to originate from Meridian, Mississippi, 39309-5000. Bids must be submitted by August 3, 2026, with the solicitation posted on July 26, 2026, and all deliverables must meet stringent defense standards without deviation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

HANDLE, DOORThe contract solicitation SPE4A7-26-R-X967 is for the procurement of one unit of Handle, Door with NSN 1680-01-538-5995 under a fixed-price indefinite delivery contract with a five-year base period and no options, valued at a maximum of $349,999.99. Delivery is required within 49 days after issuance of an order, with FOB destination and inspection and acceptance occurring at the final delivery point. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, utilizing a unit box container with fiber wrap, clean/dry preservation, and no special marking. Palletization must comply with DLA’s RP001 packaging requirements. The contractor is prohibited from intentionally introducing mercury or mercury compounds into the product except for specific functional uses in batteries, lighting, instrumentation, weapon systems, or chemical reagents as defined by NAVSEA, and any portable mercury-containing devices must be shockproof with secondary containment. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and the contractor must adhere to DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. The contract mandates full compliance with a comprehensive set of federal regulations and clauses including those governing supply chain security, prohibition of certain telecommunications and software, equal opportunity for veterans and individuals with disabilities, combating trafficking in persons, whistleblower protections, and electronic invoicing through Wide Area WorkFlow. The contractor must maintain current information in the System for Award Management, report executive compensation, and avoid internal confidentiality agreements that restrict employee rights. All hazardous materials must comply with 29 CFR 1910.1200 and Federal Standard No. 313, and the use of PFAS and hexavalent chromium is explicitly prohibited. Past performance is the most heavily weighted evaluation criterion, significantly surpassing price and other non-price factors, with SPRS assessments carrying the greatest weight. The government will conduct a best-value trade-off analysis, not a lowest-price technically acceptable selection. Documentation must reflect compliance with all applicable standards including those for packaging, marking, safety, and cybersecurity, with no substitutions or deviations permitted unless explicitly authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Fastener Manufacturing – Machine ScrewsThe contract entails the manufacturing of 3,200 machine screws under NSN 5305-00-078-0184, requiring strict compliance with ASME B18.2.1 standards and relevant military specifications to ensure dimensional accuracy, material integrity, and performance under operational conditions. Each unit must undergo comprehensive quality inspection protocols designed to verify conformance to all technical requirements, with additional measures implemented to prevent the introduction of counterfeit components into the supply chain. The work is classified as a subcontract under NAICS code 332321 and is being procured by the ASC Commodities Division under the Department of Defense, with a response deadline of July 31, 2026. All production must meet defense-grade reliability standards, and fulfillment is expected to align with federal procurement integrity and traceability mandates, ensuring seamless integration into military logistics systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Armor Plate Manufacturing and Ballistic TestingThe contract requires the manufacture of a single unit of LCAC armor plate identified by NSN 2040-01-541-6702, conforming strictly to the DLA Master List specifications. The armor plate must undergo ballistic testing at the NTS Chesapeake facility, with all test results fully documented and submitted as part of the delivery requirements. This is a subcontract opportunity under the NAICS code 332321, with a response deadline of July 29, 2026, and the place of performance is designated as Tracy, California, with zip code 95304-5000. The contracting activity is attributed to the ACTIVE DEVICES DIVISION under the Department of Defense, though no set-aside provisions or specific point of contact details are provided. Bidders must ensure compliance with all technical and procedural standards outlined in the DLA Master List and be prepared to meet the demanding ballistic performance criteria.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

in about 23 hours

Armor Plate Manufacturing & SupplyThe contract entails the manufacture and supply of one supplemental armor plate unit designed for LCAC vessels, adhering strictly to military specifications and technical requirements established by the Defense Logistics Agency. The unit must meet rigorous durability and performance standards to ensure operational readiness in demanding environments, with all fabrication and delivery processes aligned to defense industry norms. The work is to be performed at Tracy, California, with the zip code 95304-5000 designated as the official place of performance. This is a subcontracting opportunity under NAICS code 332321, which pertains to forged steel and other metal product manufacturing, and is issued by the Fluid Handling Division of the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, creating a narrowfive-day window for potential contractors to submit proposals. All submissions must demonstrate full compliance with the technical and contractual obligations outlined by DLA, and failure to meet these criteria will result in disqualification. The contract is not subject to any set-aside provisions, meaning it is open to all eligible suppliers regardless of business size or status.

FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 23 hours

Precision Metal Stamping and Manufacturing of Automobile PlatesThe contract involves the manufacture of 100 precision metal automobile plates specifically for U.S. Marine Corps General Officers, requiring strict adherence to visual, dimensional, and shade specifications. The work is structured in two phases: a first article submission must be delivered for evaluation before full production can proceed, ensuring all units meet exacting military standards. The manufacturing process falls under NAICS code 332321, indicating precision metal stamping and related fabrication activities, and is classified as a subcontract under the Department of Defense’s C and T Supply Chain organization. The solicitation was posted on July 24, 2026, with a firm response deadline of July 31, 2026, and performance is expected to occur within the broader scope of Defense logistics infrastructure, though no specific location for performance or point of contact is provided. All deliverables must satisfy rigorous quality controls prior to acceptance and deployment.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL,This contract pertains to the procurement of one unit of supplemental armor plate, also known as LCAC armor panel, identified by NSN 2040-01-541-6702, to be supplied by RAVELIN DEFENSE, INC. and FORCE ENGINEERING INC. with specified part numbers. The armor plate must meet technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contractor must comply with CMMC Level 2 cybersecurity self-assessment standards due to the handling of covered defense information. Testing of the armor must be conducted at NTS Chesapeake in Belcamp, MD, and ballistic test results for each shipment must be submitted to the DLA Troop Support Contracting Officer. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with specific packaging, cushioning, and marking protocols, including palletization per DLA guidelines and no special marking code. Delivery is required FOB origin within 211 days, with a required ship date of March 24, 2026, and the final destination is the DLA San Joaquin Distribution Center in Tracy, CA. The contract is governed by the solicitation SPE7M5-26-T-304Y issued by the Department of Defense’s Active Devices Division, and all shipments are subject to zero variance in quantity, with inspection and acceptance occurring at the destination point.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

in about 23 hours

ARMOR, SUPPLEMENTAL,The contract pertains to the procurement of a single unit of supplemental armor plate, also known as LCAC armor panel, designated by NSN 2040-01-541-6704 and part number 110-240250-001, to be supplied by RAVELIN DEFENSE, INC. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The delivery is due within 228 days from the contract date, FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, California. The armor plate must undergo ballistic testing at NTS Chesapeake in Belcamp, Maryland, with results submitted to the DLA Troop Support Contracting Officer. Compliance with CMMC Level 2 cybersecurity standards is required, and the supplier must adhere to DLA packaging and shipping protocols, including transportation guidelines outlined in DLAD PROC NOTES C19 and C20. The contract is part of a federal solicitation issued by the Department of Defense’s Fluid Handling Division under solicitation number SPE7M4-26-T-236D, with a specified due date for response in July 2026 and a required delivery date of December 15, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 23 hours

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

CABLE ASSEMBLY, RADIThe item is a radio frequency cable assembly with NSN 5995-01-283-3311, with a quantity of 100 units requiring delivery within 163 days after order. This procurement is a total small business set-aside under FAR 19.5, issued by the ASC Commodities Division under the U.S. Department of Defense. The solicitation remains open until August 7, 2026, and is publicly accessible through the DIBBS system. The contract incorporates all technical and quality requirements listed in the DLA Master List, with the applicable revision determined by the solicitation issuance date. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and the item is subject to covered defense information protocols. Packaging must adhere to DLA standards, and manufacturers and non-manufacturers must meet tailored higher-level quality requirements. Configuration changes require formal engineering change proposals for any deviation or waiver. All supplies must be marked per physical identification requirements, and any non-accepted items must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and formal approval by DLA.

Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

WIRING HARNESSThe contract is for a wiring harness identified by NSN 6150-01-119-4113 with a quantity of 50 units, subject to a delivery deadline of 874 days after order. The solicitation, numbered SPE4A6-26-R-XB78, was posted on July 28, 2026, with responses due by August 7, 2026, and is a Total Small Business Set-Aside under FAR 19.5. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item includes export-controlled technical data regulated under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire approval. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The contracting activity is the ASC Commodities Division under the Department of Defense, with primary point of contact Joshua Tuggle.

Current-Carrying Wiring Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

WIRING HARNESS, BRANThe contract specifies the procurement of 100 units of a branched wiring harness identified by NSN 6150-01-674-3406, with a delivery requirement of 176 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. The item is subject to stringent cybersecurity and data protection protocols, including compliance with CMMC Level 2 as certified by a C3PAO, and the handling of covered defense information as defined under RD002. Physical identification and bare item marking must adhere to specified standards. Packaging must conform to DLA packaging requirements, and documentation for source approval requests is mandatory. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location; only DLA-approved contractors with JCP certification, completed training, and approved access may handle such data. Removal of government identification from non-accepted supplies is prohibited, and data distribution is tightly controlled under DFARS 252.225-7048. The solicitation number is SPE4A6-26-R-XB80, posted on July 28, 2026, with responses due by August 7, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, coordinated by Joshua Tuggle.

Current-Carrying Wiring Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

WASHER, FLATThe contract specifies the procurement of five flat washers with NSN/Part Number 5310-01-733-7584 under solicitation SPE4A6-26-Q-1214, issued by the ASC Commodities Division of the Department of Defense. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Mercury or mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except in specific exempted applications such as batteries, fluorescent lights, sensors, and certain instruments as defined by NAVSEA, with additional containment and shock-proofing requirements for portable devices. Technical data associated with this item is subject to export controls under ITAR or EAR, and dissemination to foreign persons—regardless of location—is restricted without prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete required DOD export control training, and receive explicit approval from the DLA to access controlled data. The contract opens for response on July 28, 2026, with a deadline of August 3, 2026, and primary contact is Vincent Price at the provided email and phone number.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

ADAPTER, RADIO FREQUThe contract under solicitation number SPE4A6-26-R-XB88 is for the procurement of an adapter, radio frequency, with NSN/Part Number 5940-01-507-4298, to be delivered within 223 days after contract award. Issued by the ASC Commodities Division of the Department of Defense, the solicitation was posted on July 28, 2026, with responses due by August 14, 2026, and the primary point of contact is Mildred Vargas-Astacio. The contract is subject to strict compliance with procurement regulations, including mandatory representations regarding transportation by sea. If the Contractor initially represented that no sea transport would occur but later discovers sea transport is necessary, they must immediately notify the Contracting Officer. Failure to do so, or unauthorized use of foreign-flag vessels during performance, may result in equitable adjustments to the contract value. Additionally, if the contract exceeds the simplified acquisition threshold, the final invoice must include all required representations; otherwise, it will be rejected as improper under the Prompt Payment clause and returned to the Contractor.

Other Communications Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Packaging, Marking & Logistics SupportThe contract requires full compliance with military standards for packaging, marking, and bar-coding as defined by MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly prepared for military logistics and supply chain handling. Delivery is specified as FOB Origin, meaning the contractor assumes responsibility for packaging and readiness at the point of shipment, with no obligation for transportation costs or risk beyond that point. Invoicing must be processed through the Wide Area Workflow system to meet Department of Defense financial and documentation protocols. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the Small Business Administration. The NAICS code 493190 indicates the work falls under Other Truck Transportation, suggesting the focus is on logistics and transportation support services tied to military packaging requirements. The contracting office is the ASC Commodities Division under the Department of Defense, with proposals due by August 7, 2026, following a July 27, 2026 posting date. Compliance with all federal and military standards is mandatory for award consideration.

Other Warehousing and Storage

POSTED

DEADLINE

CMMC Assessment & Cybersecurity ComplianceThis contract entails a CMMC Level 2 assessment and comprehensive cybersecurity system hardening to ensure full compliance with NIST SP 800-171 requirements. The scope includes a detailed audit of existing security controls, identification of gaps, and implementation of remediation measures to meet the necessary cyber hygiene standards. The contractor is responsible for achieving certification through a C3PAO accredited organization, ensuring that all assessed systems are properly documented, secure, and aligned with Department of Defense cybersecurity mandates. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. It is categorized under NAICS code 541512 for Computer Systems Design Services and is issued by the ASC Commodities Division within the Department of Defense. Proposals are due by August 7, 2026, with the solicitation published on July 27, 2026. The work may be performed remotely or at the contractor’s facility, with no specific physical location designated for performance, and the award will be managed under federal subcontracting guidelines applicable to defense-related cybersecurity services.

Computer Systems Design Services

POSTED

DEADLINE

Technical Data & Export Control Compliance ServicesThe contract pertains to the management of ITAR and EAR-controlled technical data with a focus on ensuring full compliance with U.S. export control regulations. It requires comprehensive services including strict access control protocols, specialized training programs, and ongoing monitoring to enforce restrictions on foreign nationals, ensuring that sensitive technical information is handled in accordance with federal law. The scope emphasizes operational procedures that safeguard controlled data across all stages of handling, from receipt and storage to dissemination and disposal, with particular attention to personnel vetting and security awareness. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541611 for administrative management and general management consulting services. The work is contracted through the ASC Commodities Division of the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 27, 2026. Performance location details are unspecified, indicating flexibility or that the work may be conducted remotely or at multiple sites. The solicitation number is SPE4A626RXB74, and the contract is managed through the DIBBS platform, requiring interested parties to review and submit proposals through the official online portal.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

Engineering Services

POSTED

DEADLINE

Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Logistics and Shipment CoordinationThe contract focuses on the coordination of FOB-origin shipments for shear bolts, requiring full compliance with the Web-Based Supply Chain System for invoicing, ensuring all documentation meets WAWF standards. Shipment handling must be executed under DPAS-rated priority to guarantee timely delivery in support of defense logistics, with routing strictly aligned to DoDAAC and CAGE codes to ensure accurate and secure delivery to designated military recipients. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 488510, which pertains to other support activities for air transportation and logistics coordination. The posting date is July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the ASC Commodities Division within the Department of Defense, indicating this effort supports critical defense supply chain operations.

Freight Transportation Arrangement

POSTED

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

Engineering Services

POSTED

DEADLINE