Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Optical Instrument Manufacturing

Active

Federal

Response Deadline08/05/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of a dual-axis digital autocollimator meeting exacting optical and mechanical standards, requiring precision engineering to ensure high accuracy and reliability in measurement applications. The device must include embedded firmware with clearly defined versioning including a name, version number, and date stamp to ensure traceability, updates, and compliance with technical documentation requirements. The instrument is intended for specialized use in environmental or defense-related optical calibration systems, with performance criteria demanding strict adherence to industry-leading tolerances. The opportunity is structured as a subcontract under NAICS code 334510, which classifies it within the optical instrument and appliance manufacturing sector, and is posted by the Department of Defense through its agency FA2263 Aflcmc Romk Afmetcal. The place of performance is designated as Heath, Ohio, with a response deadline of August 5, 2026, at 6:00 PM Eastern Time, and the solicitation was made available on July 6, 2026. There is no set-aside designation, and the contract is open to qualified subcontractors capable of delivering fully integrated, field-ready instruments with documented firmware controls.

General Info

Manufacture dual-axis digital autocollimator with firmware traceability for DoD use in Heath, Ohio, by August 5, 2026.

Agency

Department Of Defense → FA2263 Aflcmc Romk AfmetcalView Agency

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus ManufacturingView NAICS

Place of Performance

Heath, OH, 43056, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 6

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 06:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2263 Aflcmc Romk Afmetcal

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a dual-axis digital autocollimator to precise optical and mechanical specifications, including embedded firmware with identifiable versioning (name, version, date).

Similar Contracts

Same NAICS industry code

ELECTRODE, ELECTROCARDIThe contract involves the procurement of two electrocardiogram electrodes identified by NSN 6515-01-333-5963, issued under solicitation number SPE2DS-26-T-272M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is classified as a federal procurement with no specific set-aside designation. The items are intended for use in medical monitoring applications and will be delivered to a performance location within the United States, though the exact city or state is not specified. The procurement is managed through the DLA’s DIBBS system, and interested vendors must submit responses via the provided online portal prior to the deadline.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

DISH, CULTURE, PETRIThe contract pertains to the procurement of two units of DISH, CULTURE, PETRI with NSN/Part Number 6640-01-453-7466 under solicitation number SPE2DH-26-T-5486, issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is categorized as a federal solicitation with no set aside provisions identified. The item is intended for delivery to an unspecified location within the United States, and no specific point of contact details are provided in the documentation. Interested parties can access the full solicitation details via the provided DIBBS link for submission and further guidance.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

ELECTRODE GEL, ELECTROMThe contract pertains to the procurement of electrode gel for electromagnetic applications under NSN 6515-01-153-4971, with a single unit requested through purchase request 7017611384. The solicitation, identified as SPE2DS-26-T-271G, was posted on July 26, 2026, and responses must be submitted by August 3, 2026. This is a federal procurement issued by the Defense Logistics Agency under the Department of Defense, targeting suppliers to fulfill a specific military or defense-related need. The solicitation does not specify a set-aside type or NAICS code, and no point of contact details or location information for performance or delivery are provided. All information and submissions are to be handled through the official DIBBS platform via the provided link.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

AMR Water Meter Supply and DistributionThe contract seeks the supply of approximately 260 automated water meters that are fully compatible with an Advanced Metering Infrastructure system, encompassing all necessary packaging, delivery, and handling services to ensure seamless integration. The equipment must meet technical and operational standards to support accurate, remote data collection and system reliability for municipal water management. The contract is classified as a subcontract under NAICS code 334510 and is issued by the Mississippi Department of Finance and Administration under the MPTAP designation, with a response deadline of August 17, 2026. All deliveries and performance obligations are expected to be fulfilled as specified without requiring additional site-specific installation or configuration beyond the scope of meter readiness and logistics.

POSTED

DEADLINE

Oxygen Generating System Supply and DeliveryThe contract seeks the supply and FOB destination delivery of two portable medical oxygen generating systems capable of producing oxygen at a purity level of at least 99 percent and pressurized to 2,200 psig, with integrated cylinder filling capabilities for D, M, E, and H size medical oxygen cylinders. The systems must be compatible with single-phase electrical power to ensure operational flexibility across diverse medical environments. Delivery is to be completed under FOB destination terms, meaning the supplier assumes all responsibility and risk of loss until the equipment reaches the designated delivery point, with no specified location provided beyond the state-level jurisdiction of Florida under the Department of Health. The solicitation is classified as a subcontract under NAICS code 334510, which pertains to medical and surgical instrument manufacturing, indicating the technical and manufacturing rigor required. Responses are due by August 18, 2026, at 6:30 PM Eastern Time, with the opportunity posted on the Florida marketplace platform for vendor participation.

Department of Health

POSTED

DEADLINE

Precision Manufacturing of Technical ModuleThe contract requires the manufacture of ten high-reliability electronic modules with part number 853000585, built to strict defense specifications covering the full lifecycle from component sourcing and assembly through testing and quality assurance. All work must comply with defense-grade standards to ensure performance under demanding operational conditions, and the production is to be executed at the designated location in Tracy, California, with a zip code of 95304-5000. The contract is classified as a subcontract under NAICS code 334510, indicating it pertains to electronic component and product manufacturing, and is managed by the Active Devices Division of the Department of Defense. Interested parties must submit proposals by the response deadline of August 1, 2026, with the solicitation posted on July 24, 2026. The opportunity is not set aside for any specific small business category, and while no point of contact is listed, further details can be accessed through the provided DIBBS link. The nature of the work demands proven experience in defense electronics manufacturing, rigorous quality control processes, and adherence to stringent documentation and traceability requirements associated with critical defense systems.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Installation of Functional Mercury-Based EquipmentThe contract involves the physical installation of mercury-containing equipment integral to defense systems, specifically including sensors, controls, and battery components, all of which must be installed in strict accordance with NAVSEA specifications. This subcontract is focused on precise technical execution to ensure the operational integrity and safety of defense-related hardware, with all work to be performed at the designated location in New Cumberland, Pennsylvania, under the supervision of the Department of Defense. The installation must adhere to regulatory and environmental standards due to the hazardous nature of mercury, requiring certified personnel and documented compliance protocols. The solicitation was posted on July 24, 2026, with a submission deadline of July 29, 2026, leaving a brief window for qualified contractors to respond. The North American Industry Classification System code 334510 identifies the scope within the manufacturing of search, detection, navigation, guidance, aeronautical, and naval systems. Despite the absence of a set-aside designation or point of contact information, the contract is publicly accessible via the DLA Dibbs portal and is intended for contractors with demonstrated experience in handling hazardous materials and defense-specific equipment installations. Timing and technical compliance are critical, as failure to meet NAVSEA standards or miss the deadline will result in disqualification.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

LINAC Equipment Installation & CommissioningHarris County is seeking a subcontractor to supply, rig, install, and commission a new linear accelerator, encompassing full alignment, calibration, and seamless integration with existing facility systems. The work requires technical expertise in medical radiation equipment, precise mechanical handling, and system-level coordination to ensure operational readiness and regulatory compliance. All deliverables must meet stringent performance standards, and the contractor is responsible for end-to-end project execution from delivery through final commissioning. The opportunity is open for bids until August 31, 2026, under NAICS code 334510 for medical equipment manufacturing, and performance is expected to occur at an undisclosed location within Texas.

POSTED

DEADLINE

in about 1 month

Computed Radiography (CR) System Supply and IntegrationThe contract entails the supply and delivery of a complete Carestream INDUSTREX HPX-1 Plus Computed Radiography system designed for digital radiography inspection of aerospace components, including the reader, dedicated PC, imaging cassettes, and all necessary tools for operation and integration. This system is intended for use in high-precision non-destructive testing applications, ensuring accurate imaging and analysis of critical aerospace parts to meet stringent industry and NASA safety standards. The equipment must be fully functional, properly calibrated, and ready for immediate deployment upon delivery to the specified location. The system is to be delivered and integrated at Edwards, California with a zip code of 93523, where it will support NASA's inspection and quality assurance workflows. The contract is classified under NAICS code 334510, indicating its alignment with manufacturing of electronic and precision instruments. As a subcontract, it is linked to a larger procurement effort managed by the NASA Shared Services Center under the National Aeronautics and Space Administration. The solicitation was posted on July 24, 2026, with responses due no later than July 29, 2026, at 9:00 PM Eastern Time, making the timeline narrow and the submission process time-sensitive. All deliverables must meet technical and regulatory requirements for aerospace applications without deviation.

NASA Shared Services Center

POSTED

DEADLINE

Remote Patient Monitoring System Hardware SupplyThe contract is for the sole-source supply of commercial off-the-shelf remote patient monitoring hardware and associated components to support deployment at the Albuquerque VA Healthcare System. It is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Sole Source procurement under NAICS code 334510, indicating that only one qualified vendor meeting the eligibility criteria can be awarded. The equipment is intended to enhance remote patient care capabilities within the VA’s existing healthcare infrastructure, enabling continuous monitoring of patient vitals and health metrics outside traditional clinical settings. The solicitation was posted on July 24, 2026, with a response deadline of August 5, 2026, and is managed by the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs. The performance location is specifically tied to the Albuquerque facility, with no other jurisdictions or delivery points identified.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Supply of Marine Weather StationsThe contract involves the procurement and delivery of 21 units of Gill Instruments MaxiMet Marine GMX560 Compact Weather Stations, specifically configured and calibrated to meet exacting technical specifications required for marine environmental monitoring. All units must be fully functional and prepared for immediate deployment in challenging maritime conditions, ensuring accurate and reliable collection of atmospheric and oceanic data. The equipment is intended for use at a designated place of performance in Chesapeake, Virginia, where it will support operational and research activities under the auspices of the National Oceanic and Atmospheric Administration, a division of the Department of Commerce. Submissions for this subcontract opportunity are due by August 4, 2026, at 7:00 p.m., with the solicitation posted on July 24, 2026. The North American Industry Classification System code 334510 indicates this falls under the manufacturing of measuring and controlling instruments, underscoring the technical and precision manufacturing nature of the requirement. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors without preferential treatment. The emphasis is on adherence to technical standards, timely delivery, and proper calibration to ensure data integrity for NOAA’s marine weather monitoring programs.

Department Of Commerce Noaa

POSTED

DEADLINE

Thermal Imaging Camera Supply (FLIR K-85N or Equivalent)NASA Shared Services Center is seeking suppliers to provide FLIR K-85N thermal imaging cameras or an approved equivalent for integration into Ladder/Tower Units used in firefighting and rescue operations at Stennis Space Center. The cameras must meet operational requirements for enhanced visibility in low-light and smoke-filled environments, ensuring safety and effectiveness during emergency response scenarios. This subcontract opportunity has a response deadline of August 3, 2026, and falls under NAICS code 334510 for navigation, measuring, electromedical, and control instruments manufacturing. The equipment will be deployed at a specified performance location in Stennis Space Center, Mississippi, with no set-aside classification applied. All proposals must be submitted prior to the deadline to be considered for award.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Same awarding agency

Portable Coordinate Measuring Machine (CMM)The solicitation FA226326Q0019 seeks proposals for a Portable Coordinate Measuring Machine (CMM) issued by the Department of Defense through the Office of FA2263 Aflcmc Romk Afmetcal located in Heath, Ohio. All submissions must be made exclusively through the Solicitation Module on the Procurement Integrated Enterprise Environment (PIEE) website; no proposals will be accepted via email or DoD SAFE. The solicitation is posted as a combined synopsis and solicitation, with all supporting documents accessible only within the PIEE system. Interested parties are directed to monitor both sam.gov and piee.eb.mil for any updates or amendments. The response deadline is August 14, 2026, at 6:00 PM Eastern Time, with the solicitation originally posted on July 15, 2026. The North American Industry Classification System code is 334516, indicating procurement within the instrument manufacturing sector. Primary point of contact is Thomas Carson, reachable at 937-713-5844 or thomas.carson.2@us.af.mil, with Allen Kurella as the secondary contact at 937-713-5843 or allen.kurella@us.af.mil. There is no set-aside designation specified for this opportunity.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Cold Cathode Vacuum Gauge StandardThis solicitation, identified by RFQ number FA226326Q0018, is for the procurement of a Cold Cathode Vacuum Gauge Standard under Simplified Acquisition Procedures as a commercial item in accordance with FAR Part 12. The requirement specifies a new, commercially available off-the-shelf unit with a one-year commercial warranty, accompanied by a COTS manual, Safety Data Sheet, and Commercial Engineering Design Data. Reconditioned, remanufactured, or used units are strictly prohibited. The acquisition is classified under NAICS code 334513 with a small business size standard of 750 employees. All proposals must be submitted exclusively through the PIEE Solicitation Module by 2:00 PM EDT on August 13, 2026, and must include the commercial unit for evaluation along with a comprehensive written proposal that addresses each requirement in the Purchase Description, a completed Supplies or Services and Price/Cost section, a Total Evaluated Price Worksheet, and all required certifications and representations. Submitting offers via email, DoD SAFE, or any other method will result in rejection. Offerors must be actively registered in SAM.gov and the PIEE system, and proposals must be FOB Destination and valid for 120 days. Each submission must include a commercial price list, warranty documentation, signed authorization from a company representative complete with contact details, taxpayer identification number, CAGE Code, and DUNS Number. Contractors awarded under this contract will be required to use the Wide Area WorkFlow system through PIEE for electronic invoice submissions as mandated by the National Defense Authorization Act. Participation requires completion of free vendor training provided by PIEE, and failure to register or submit properly formatted electronic files will disqualify an offer. All documents including the purchase description, submission instructions, and evaluation forms are accessible only within the PIEE Solicitation Module, and offerors are responsible for monitoring for amendments. Only responses received electronically within the specified deadline and format will be considered for award.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Dual Axis Digital AutocollimatorThe U.S. Air Force, through AFMETCAL at Heath, Ohio, is soliciting commercial off-the-shelf Dual Axis Digital Autocollimators under a full and open competition using Simplified Acquisition Procedures, with the solicitation number FA226326Q0017. The procurement is conducted under the Revolutionary FAR Overhaul and R-DFARS, and targets new, unmodified commercial or COTS units conforming to Purchase Description 26M-258A-OP Rev. 2, dated June 16, 2026. The anticipated requirement is for up to 39 units over five years, with a one-year option period, resulting in a potential maximum of 77 units. The contract will be awarded as a firm-fixed price Indefinite Delivery Indefinite Quantity (IDIQ) with deliveries FOB Destination to AFMETCAL, Heath, OH. All products must meet exacting technical specifications including a measurement range of ±500 arc-seconds, accuracy of ±0.5 arc-second or better within 8 feet, and repeatability of ±0.1 arc-second, and must include a rugged, waterproof reusable shipping case, all necessary accessories, a user’s manual, and a minimum three-year manufacturer warranty covering hardware and firmware. Offers must be submitted electronically via the DoD SAFE portal no later than September 4, 2026, at 2:00 PM EDT, following amendments extending the original deadline. Proposals must include a completed technical proposal with a line-by-line response to the Purchase Description, a signed commercial price list, a valid Total Evaluated Price Worksheet, proof of SAM registration, CAGE and DUNS codes, taxpayer identification number, and warranty documentation. The technical proposal will be evaluated primarily for compliance with the Purchase Description and enhanced capabilities, with price considered significantly less important but still substantially contributing to the award decision. Failure to meet any technical requirement renders the proposal unacceptable. Contractors must be compliant with electronic invoicing requirements via WAWF through PIEE, and must complete mandated training and registration. Units are subject to inspection upon delivery at AFMETCAL and later at PMEL sites within 30 days of receipt; invoicing is prohibited until acceptance is confirmed. All shipment containers must be properly marked with requisition number, NSN, mark for account, attention PMEL type, and conform to MIL-STD-130 and MIL-STD-129 for unique item identification.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Unable to Decompose Subcontract OpportunitiesThe contract opportunity titled "Unable to Decompose Subcontract Opportunities" was posted on July 9, 2026, with a response deadline of August 13, 2026, and is categorized as a subcontract. No solicitation number, set-aside information, NAICS code, or organizational details are provided, and the agency name appears as FA2263 Aflcmc Romk Afmetcal under the Department of Defense. The office address, place of performance, and point of contact are all unspecified, leaving critical logistical and administrative information incomplete. Authentication failed during attempts to retrieve the underlying prime contract data, resulting in an inability to decompose the opportunity or access any clause, line item, or metadata necessary for further analysis or proposal preparation. The only available reference is a SAM.gov workspace link, which may require valid credentials to access additional context that is currently blocked by a 401 Unauthorized error.

POSTED

DEADLINE

AFPSL Quantum Hall Resistance Standard Measurement SystemThe Air Force Metrology Calibration Program is conducting market research to identify capable vendors for a turn-key Quantum Hall Resistance Standard Measurement System to replace its legacy equipment at the U.S. Air Force Primary Standards Laboratory. This system must deliver highly precise, automated resistance measurements from 100 mΩ to 13 kΩ with absolute uncertainties as low as ±0.015 ppm, using a NIST Graphene QHR Sample Chip as the reference and supporting the 4304-1kAF Resistance Standard. Required hardware includes a cryogen-free superconducting magnet, an automated resistance ratio bridge, a 10-channel low-thermal matrix scanner, and supporting cryogenics, temperature controllers, and vacuum systems—all integrated into a compact 3 ft by 6 ft footprint with standard 19-inch rack mounting. The system must be accompanied by a Windows 11 LTSC 64-bit software suite capable of executing complex N-by-M measurement sequences, performing real-time uncertainty analysis, least-squares regression, and comprehensive data export. Full onsite installation, performance validation, and training for up to ten personnel are mandatory. This is strictly a request for information and not a solicitation; no binding contract will result from responses, and no payment will be made for submissions. Respondents must be prepared to demonstrate technical capability through documentation, including commercial literature, warranty details, past relevant contracts, and proof of compliance with all specifications. The Government requires full disclosure of business size, socioeconomic status, CAGE code, SAM registration status, foreign ownership, and whether the product is commercial or will be modified. Responses must include estimated pricing, delivery timelines, and availability of the item through a GSA schedule or other government contract. Only new, unmodified equipment is acceptable; reconditioned or used items are prohibited. All submissions must be received by August 13, 2026, at 2:00 p.m. ET and must be sent via email in .pdf, .doc, or .xls format to the designated points of contact, with reference to solicitation number 27E-651A-DC. Both large and small businesses, including those with special designations such as HUBZone, 8(a), or veteran-owned, are encouraged to respond, and teaming arrangements are welcomed.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Warranty and Technical Support ServicesThe contract outlines the provision of warranty documentation and post-delivery technical support for high-frequency power calibration equipment, with an explicit exclusion of any reconditioned or used components. All services must be delivered in compliance with industry standards for new equipment, ensuring the integrity, accuracy, and reliability of calibration systems throughout their operational lifecycle. Support includes detailed documentation of warranty terms, troubleshooting guidance, software updates, and access to qualified technical personnel to address performance issues promptly after delivery. The contract is classified as a subcontract under NAICS code 541519, reflecting its focus on other scientific and technical consulting services. It was posted on July 8, 2026, with a response deadline of August 7, 2026, at 6:00 PM. The awarding agency is the Department of Defense through the FA2263 Aflcmc Romk Afmetcal office, though specific location details for performance or contact information are not provided. All proposals must clearly demonstrate capability to support new equipment only and must be responsive to the technical and documentation requirements specified in the solicitation.

Other Computer Related Services

POSTED

DEADLINE

Technical Documentation and Software SupportThe contract requires the development and delivery of embedded firmware and software for RF calibration devices, with specific functionalities including self-test routines, automatic calibration procedures, version identification, and Windows-compatible update mechanisms to ensure seamless field maintenance and operational readiness. The software must be designed for reliable integration into hardware platforms used in military calibration environments, supporting accurate measurement standards and long-term system viability through secure and controlled firmware revisions. The work falls under NAICS code 541512 for custom computer programming services and is structured as a subcontract under the Department of Defense, managed by FA2263 Aflcmc Romk Afmetcal. The solicitation was posted on July 8, 2026, with a response deadline of August 7, 2026, at 6:00 PM. Although no specific place of performance or point of contact is detailed, the deliverables are expected to meet rigorous DoD technical and security standards, with all updates and diagnostics fully compatible with Windows-based systems to facilitate deployment across existing military infrastructure.

Computer Systems Design Services

POSTED

DEADLINE

Protective Packaging and Shipping Case SupplyThe contract seeks the supply of ruggedized, foam-lined storage and shipping cases specifically engineered to safeguard sensitive calibration instrumentation during transit and long-term storage. These cases must meet stringent durability and protective standards to ensure the integrity of high-precision equipment, which is critical for maintaining calibration accuracy in demanding environments. The design must include customized foam linings to securely hold instruments in place, shock absorption to mitigate impact, and environmental sealing to protect against dust, moisture, and temperature fluctuations. This is a subcontract opportunity under NAICS code 326199, with a response deadline of August 7, 2026, and was posted on July 8, 2026. The contracting entity is the Department of Defense, specifically under the FA2263 Aflcmc Romk Afmetcal office, though no physical address or point of contact is provided. The place of performance is unspecified, indicating flexibility in delivery location, but compliance with military-grade protection standards is implied. Bidders must demonstrate proven experience in manufacturing protective packaging for sensitive metrological instruments and be prepared to meet exacting technical and quality assurance requirements without formal set-aside designations.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

High-Frequency Power Standard Calibration Equipment SupplyThe contract calls for the supply of two high-frequency power standard calibration devices that are equivalent to the Rohde & Schwarz NRPC50 model with the B1 Verification Standard option. These devices must include the necessary firmware and be accompanied by NIST and AFMETCAL traceable calibration certificates to ensure measurement accuracy and compliance with federal standards. The equipment is intended for precise power measurement applications within a defense environment, requiring strict adherence to calibration integrity and technical equivalence to the specified model. The solicitation is classified as a subcontract under NAICS code 334511 for Electronic Instrument Manufacturing and is issued by the Department of Defense through the FA2263 Aflcmc Romk Afmetcal organization. The opportunity was posted on July 8, 2026, with a response deadline of August 7, 2026, at 6:00 PM. While specific details regarding place of performance and point of contact are not provided, the requirement implies delivery and acceptance of fully calibrated units capable of supporting metrology operations in U.S. defense facilities. Compliance with traceability and technical specifications is mandatory for award consideration.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

NRPC50 50 GHz Power Standard Calibration KitThe Air Force Metrology Calibration Program is conducting market research to identify potential suppliers for two Rohde & Schwarz NRPC50 Power Standards with the B1 Verification Standard option, intended for use in the Air Force Primary Standards Laboratory to calibrate NRP50T Power Sensors with exacting precision. This request is strictly for information gathering and does not constitute a solicitation, commitment, or obligation to award a contract; responses will not form binding agreements and no payment will be made for submissions. The equipment must serve as a primary standard capable of recalibrating the NRP50T sensors and reprogramming their calibration factors, and only new, unmodified units are acceptable—reconditioned or used equipment is excluded. Vendors may propose technically equivalent alternatives provided they submit detailed documentation proving full equivalency in performance, accuracy, and compatibility with existing AFPSL systems. Respondents must clearly identify their business size, ownership structure—including whether they are small, disadvantaged, veteran-owned, or HUBZone certified—and provide evidence of capability such as commercial literature, warranty terms, sales history to commercial entities, and previous government contracts or similar projects. Information must include whether the product is commercial off-the-shelf or planned for future public sale, whether it is on a GSA schedule, and if the vendor accepts the government purchase card. All submissions require the company’s CAGE code, SAM registration status, domestic or foreign ownership details, estimated pricing for one unit and the total quantity, delivery timelines, and a point of contact with full address and phone number. Responses must be submitted by August 7, 2026, at 2:00 p.m. ET in .pdf, .doc, or .xls format to the designated contacts, referencing solicitation number 27E-632A-RF. Both large and small businesses are encouraged to participate, and teaming arrangements or joint ventures are welcomed. No funds are currently available for this acquisition.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Technical Documentation and COTS Operator’s Manual DevelopmentThe contract pertains to the development of a commercial off-the-shelf operator’s manual for the DADA unit, encompassing detailed instructions for assembly, operation, troubleshooting, and maintenance. The scope requires the creation of comprehensive, user-focused documentation that aligns with COTS standards and ensures end users can effectively and safely interact with the equipment. The work is classified as a subcontract under NAICS code 541990, indicating it falls under other professional, scientific, and technical services. Performance is required to be completed at or delivered to Heath, Ohio, with a zip code of 43056. The opportunity was posted on July 6, 2026, and responses are due by August 5, 2026, at 6:00 p.m. The contracting activity is linked to the Department of Defense, specifically under the FA2263 Aflcmc Romk Afmetcal organization, though no point of contact information is provided. The solicitation number is not available, and no set-aside status is designated.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Unique Item Identification (IUID) Marking and ReportingThis contract requires the application of two-dimensional Data Matrix symbology in accordance with MIL-STD-130, using the ISO/IEC 16022 (ECC200) standard for data encoding and ISO/IEC 15434 for structuring data elements with Application Identifiers and Data Identifiers. All items must be uniquely identified with permanent, machine-readable markings that comply with Department of Defense standards for traceability and lifecycle management. The marked items must be reported to the DoD Unique Item Identification (UID) Database through either the Wide Area Workflow (WAWF) system or the DODProcurementToolbox.com portal, ensuring accurate and timely data integration into the federal supply chain. The contract is classified as a subcontract under the NAICS code 811212 and is issued by the Department of Defense through the FA2263 Aflcmc Romk Afmetcal office. Performance is required at a location in Heath, Ohio, with a zip code of 43056. The solicitation was posted on July 6, 2026, and responses are due by August 5, 2026, at 6:00 PM Eastern Time. Full compliance with marking and reporting obligations is mandatory for contract fulfillment, and failure to meet these requirements may result in rejection of deliverables or financial penalties.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE