Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Packaging and Preservation of Kit Components

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires precise packaging and preservation of kit components in accordance with MIL-STD-2073-1E, Appendix D, using MOP 33 and specified materials such as MIL-DTL-117 or MIL-PRF-121 to ensure protection against damage, with special emphasis on safeguarding sensitive components like O-rings and gaskets. Work must adhere strictly to military standards for long-term preservation, ensuring components remain undamaged and fully functional throughout storage and transit. This is a women-owned small business set-aside subcontract under NAICS code 326199, sponsored by the Strategic Acq Program Directorate within the Department of Defense. The opportunity was posted on August 4, 2026, with a response deadline of August 19, 2026. The place of performance and agency office details are unspecified, but the solicitation can be accessed through the DIBBS platform under the reference number SPE7LX26U9228.

General Info

Women-owned small business subcontract to package kit components per MIL-STD-2073-1E using specified military materials.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform packaging and preservation of kit components per MIL-STD-2073-1E, Appendix D, using MOP 33 and materials like MIL-DTL-117 or MIL-PRF-121 to prevent damage, especially to O-rings and gaskets.

Similar Contracts

Same NAICS industry code

MOLDING, PLASTIC

Solicitation # SPE8E5-26-T-3855

The contract pertains to the procurement of a plastic molding item identified by NSN 9330-01-276-1782 and part number 342-83004-1, supplied by BRISTOL AEROSPACE LTD in Winnipeg, Canada. A total quantity of 31 units is required at a unit price of $31.00, with delivery scheduled 148 days after contract award, FOB origin, and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with MIL-STD-130N for identification marking of U.S. military property. Packaging must adhere to DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous materials must be commercially packaged per ASTM D3951 unless otherwise directed by DLA requirements, and all packaging and labeling must follow MIL-STD-129. Palletization is mandatory per DLA Packaging Requirements. The item is not classified as hazardous under FED-STD-313, so special hazard packaging is not required. Delivery must be made to DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with a need ship date of June 30, 2026, and an original required delivery date of April 2, 2027. The solicitation number is SPE8E5-26-T-3855, issued under a federal procurement process with a NAICS code of 326199, and responses were due by August 17, 2026. All technical and quality specifications are governed by the DLA Master List referenced in the solicitation, and transportation logistics must follow DLAD Proc Notes C19 and C20.

JACKSONVILLE BLDG

POSTED

DEADLINE

FILAMENT, ADDITIVE M

Solicitation # SPE8E5-26-T-3857

The contract specifies the procurement of FILAMENT, ADDITIVE M with NSN 9330016983414 and part number 355-02142 from STRATASYS, INC, for a quantity of 2 units at a unit price of $0.000, totaling $0.000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede ASTM D3951 if applicable. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with hazardous material requiring adherence to TQ requirement IP025 according to FED-STD-313, while non-hazardous material must meet commercial packaging standards unless overridden by DLA directives. Delivery is FOB origin with a 167-day delivery window, original required delivery date of October 15, 2026, and a needed ship date of February 1, 2027. Inspection and acceptance occur at destination with zero variance allowed. Packaging and marking must include the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. The shipment destination is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3857, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326199, and point of contact is Khue Nguyen at DLA.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

PLASTIC MOLDING MAT

Solicitation # SPE8E5-26-T-3852

POSTED

DEADLINE

SEAT, WATER CLOSET

Solicitation # SPE8E8-26-T-4972

POSTED

DEADLINE

Resilient Rubber Flooring

Solicitation # FA462026QA295

The contract is for Resilient Rubber Flooring under a Brand Name or Equal requirement, specifically mandating the Diamond Fitness Systems Survivor Interlock Tile with manufacturer part number 10SIT12. It is issued as a combined synopsis and solicitation with a small business set aside designation, meaning only eligible small businesses may submit bids. The solicitation number is FA462026QA295, published on August 5, 2026, with responses due by August 12, 2026, at 5:00 PM Eastern Time. The North American Industry Classification System code is 326199, indicating non-metallic mineral product manufacturing. The contracting activity originates from the Department of Defense through office FA4620 92 Cons Lgc, located at Fairchild Air Force Base in Washington, with the place of performance also at Fairchild AFB, ZIP code 99011. Primary point of contact is Mirion Draper, reachable via email and phone, with Paul Blais listed as secondary contact. All inquiries and submissions must adhere to the requirements outlined in the attached Combined Synopsis/Solicitation and Salient Characteristics.

FA4620 92 Cons Lgc

POSTED

about 6 hours ago

DEADLINE

Supply of Filter Media and Raw Materials for Military-Grade FiltersThe contract solicits the supply of high-performance filter media, seals, gaskets, and housings essential for manufacturing NSN 4330015342361, a military-grade filtration component. All materials must strictly adhere to established military specifications and enforce rigorous traceability standards to ensure operational reliability and compliance with defense quality requirements. The procurement is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 326199 indicating classification under other plastic product manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense, reflecting its critical role in sustaining specialized defense supply chains.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Nonmetallic Tubing Manufacturing and SupplyThe contract entails the manufacture and supply of 10-foot nonmetallic tubing identified by NSN 4720014159526, meeting all technical specifications and standards mandated by the Defense Logistics Agency. Compliance is required across multiple domains including packaging under RP001 guidelines and marking in accordance with MIL-STD-129 to ensure uniformity and traceability within military logistics systems. The tubing must be produced and delivered to meet stringent defense quality and documentation requirements, with performance located at Fort Eustis, Virginia, under the auspices of the Department of Defense’s Maritime Supply Chain ESOC Buys division. The procurement is structured as a subcontract, with a NAICS code of 326199 indicating classification under other plastic product manufacturing, and the solicitation window opens on August 4, 2026, with responses due by August 17, 2026, at 17:00 Eastern Time.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Nonmetallic Tubing SupplyThe contract is for the supply of 10 feet of nonmetallic tubing under a subcontract arrangement, with technical and logistical requirements adhering to DLA RP001 packaging standards, MIL-STD-129 marking specifications, and the mandatory submission of hazardous material safety data sheets. The tubing must meet all applicable federal compliance criteria for handling, labeling, and documentation, ensuring safe and standardized distribution within government supply chains. The place of performance is designated as Fort Eustis, Virginia, with the delivery and compliance obligations expected to align with the Department of Defense’s logistical frameworks through the Maritime Supply Chain ESOC Buys office. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026, with the NAICS code 326199 indicating classification under other plastic product manufacturing. There is no set-aside designation specified, and no point of contact details are provided in the data. Interested parties must submit their proposals through the designated DIBBS portal before the deadline, ensuring full adherence to the packaging, marking, and hazardous material documentation requirements to be considered for award.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Padded Divider Sets and Protective Packaging ComponentsThe contract seeks the supply of custom padded divider sets and protective internal packaging components designed to meet strict DLA specifications and ensure compatibility with MIL-STD-129 and RP001 standards. These packaging elements are critical for the safe handling, storage, and transportation of military equipment, requiring precise engineering and material selection to provide adequate cushioning, structural integrity, and compliance with defense logistics protocols. All delivered items must be manufactured to exact dimensional and functional requirements to integrate seamlessly with existing military supply chain systems. The solicitation is classified as a subcontract under NAICS code 326199, which covers other plastics product manufacturing, and is issued by the Department of Defense through the Construction & Equipment T & IFO EQ office. The place of performance is designated as Fort Campbell with a zip code of 42223-5000, indicating the intended operational use and logistical hub for the delivered goods. Responses are due by August 17, 2026, with the opportunity posted on August 4, 2026, allowing potential vendors ample time to prepare compliant proposals through the DIBBS platform at the provided link. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or status.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

PLASTIC MOLDING KIT

Solicitation # SPE8E5-26-T-3760

The contract pertains to the procurement of a Plastic Molding Kit with NSN 9330-01-481-4339 and part number FOAM,FRL 6706, under solicitation SPE8E5-26-T-3760, issued by the Defense Logistics Agency Distribution Oklahoma City. The item is classified as a Critical Application Item with a Type II shelf life of six months, extendable, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating shelf life code 33. Packaging must avoid plastics as wrapping, cushioning, or dunnage where possible, and palletization must adhere to DLA requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances expected unless otherwise stated. The contract specifies delivery of one kilogram within five days FOB origin, with inspection and acceptance occurring at destination, and prohibits parcel post shipping—requiring traceable freight methods only. The delivery address is Tinker Air Force Base, Oklahoma, with specific marking, packaging, and hazardous material handling instructions under IP025. The purchase request number is 7017719797, and the required delivery date is August 3, 2026.

DLA DIST OKC KO CP

POSTED

DEADLINE

WINDOW, OBSERVATION

Solicitation # SPE8E5-26-T-3769

The item is a WINDOW, OBSERVATION with NSN 9330-01-131-6571, requiring a quantity of 750 units to be delivered within 425 days after order award. The solicitation number is SPE8E5-26-T-3769, posted on August 4, 2026, with responses due by August 17, 2026, and the procurement is managed by the Department of Defense through Depot Hill at Hill AFB, Utah. The contract is subject to strict export control regulations under either ITAR or EAR, meaning all technical data associated with this item is restricted and cannot be shared with foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and foreign subsidiaries of U.S. companies. Only DLA contractors with approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling defense export-controlled data and submitted the DLA export control questionnaire, are permitted access to the technical data. DFARS 252.225-7048 governs compliance, and the primary point of contact for inquiries is Khue Nguyen at khue.nguyen@dla.mil.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-914X

The contract involves the procurement of 17 units of BUTTON, PLUG with NSN 5340-01-156-8935 under solicitation SPE7L1-26-T-914X, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the acquisition scale. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. Documentation for source approval is mandatory, and the technical data associated with this item is classified under export control regulations—either ITAR or EAR—restricting disclosure to foreign persons, including those within the United States, without prior authorization. Only contractors approved under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire, may access this controlled data. Delivery is due within 118 days of award, with performance taking place in San Diego, California. The solicitation closed on August 17, 2026, and primary point of contact is Brandon Pesicek, reachable via email or phone provided.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

BRACKET, MOUNTING

Solicitation # SPE7LX-26-U-9329

The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.

Hardware Manufacturing

POSTED

DEADLINE

ARM ASSEMBLY, PIVOT, TRA

Solicitation # SPE7LX-26-U-9303

This contract pertains to the procurement of 459 units of ARM ASSEMBLY, PIVOT, TRACK SUSPENSION with NSN 2530-01-356-4613 under solicitation SPE7LX-26-U-9303, issued by the Defense Logistics Agency through a Total Small Business Set-Aside. The delivery deadline is set at 75 days after award, and the solicitation closed on August 20, 2026, with a posting date of August 5, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. CMMC Level 2 certification is required for third-party assessment organizations involved, and compliance with DLA packaging standards for procurement is mandatory. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly permitted by specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting dissemination to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization from DLA. The Point of Contact for this solicitation is Theodore Misiolek, reachable via email and phone as listed.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7LX-26-U-9318

The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9330

The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.

Hardware Manufacturing

POSTED

DEADLINE

BRAKE, SEGMENTED ROTOR

Solicitation # SPE7LX-26-U-9296

The contract specifies the procurement of a brake segmented rotor identified by NSN 2530015567156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC, under solicitation SPE7LX-26-U-9296. It is classified as a commercial item and falls under a total small business set-aside. The requirement is for 141 units to be delivered FOB origin within 145 days with no variance allowed in quantity. Delivery is to be made to the destination where inspection and acceptance occur. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including individual packaging with QUP 001, and all items must be preserved using code 89 preservative material to prevent corrosion on bare metal, moving parts, and threads. The packaging also requires barrier wrapping with code GC to prevent surface abrasion and corrosion from contact with blocking and bracing materials, and cushioning using code AD rigid low-density materials or wood and plywood conforming to specified standards. All packaging and marking must adhere to MIL-STD-129 with special marking code ZZ indicating “ARROW UP OPEN THIS SIDE.” Blocking and bracing must be designed to protect against shock and vibration, using materials compatible with the load and item surfaces, with wood and plywood members engineered for strength and easy removal without damage. The item is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers, and all contractual obligations are governed by the version of the master list in effect on the solicitation issuance date.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9327

The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9307

The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9284

The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9319

The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.

Hardware Manufacturing

POSTED

DEADLINE

SEAL, OIL, HORIZONTAL

Solicitation # SPE7LX-26-U-9310

The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

PARTS KIT, BRAKE SHOE

Solicitation # SPE7LX-26-U-9298

This contract covers the procurement of a Parts Kit, Brake Shoe under solicitation number SPE7LX-26-U-9298, with a national stock number of 2530-01-686-1627 and a required quantity of 242 units, each priced individually for a total estimated value based on unit cost. The delivery must be completed within 79 days, with shipment terms defined as FOB origin, and no variance is permitted in the quantity—neither plus nor minus zero percent. Inspection and acceptance of the goods occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E Appendix D for kits, alongside MIL-STD-129 for marking. All preservation and packaging materials must be free of mercury or mercury compounds, and palletization must adhere to DLA’s Packaging Requirements for Procurement outlined in RP001. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all R and I numbered specifications that apply to the item’s technical and quality standards. The contractor, identified as either DETROIT DEFENSE, INC. or DETROIT DEFENSE SYSTEMS, LLC, must supply the kit under DLA Direct, CONUS coverage, and the item is subject to federal acquisition rules. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is classified under NAICS code 336330 for automotive parts manufacturing. The point of contact for inquiries is Theodore Misiolek of the Strategic Acquisition Program Directorate within the Department of Defense, reachable via phone and email provided. All documentation must align with DoD unit of issue standards, and no special marking is required beyond standard military labeling. The contract is issued for a simplified acquisition, meaning the version of the DLA Master List in effect on the solicitation’s issue date governs all technical and quality requirements.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

SHAFT, DRIVE, FLEXIBL

Solicitation # SPE7LX-26-U-9292

The contract pertains to the procurement of 135 flexible drive shafts identified by NSN 3040-01-457-0460 under solicitation SPE7LX-26-U-9292, with a required delivery within 98 days of award. The specification strictly limits acceptable products to those precisely described on the referenced drawing, and no alternative offers will be evaluated or approved by DLA Land & Maritime. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The contract is administered by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact. The NAICS code 333613 classifies this as a manufacturing procurement, and the solicitation is open to federal contractors with a response deadline of August 20, 2026. Government identification must be removed from any non-accepted supplies, and potential suppliers seeking future qualification must engage directly with the cognizant design activity as outlined in FAR Clause 52.209-1.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE