This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Weapon Accessory Manufacturing – Sniper Rifle Bipod (POD-LOC)

Closed

Federal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M4-26-Q-1006

This contract is for the procurement of 34 air duct hoses under solicitation SPE7M4-26-Q-1006 for the Department of Defense Fluid Handling Division. The items must be delivered within 470 days after order. A critical technical exception for drawing 37469 requires the use of Grade 50 instead of Grade 60 per MIL-R-25988, Type II, Class 1. The items are classified as commercial and must adhere to strict environmental standards, specifically prohibiting the use of Class I ozone depleting chemicals. The contractor must comply with several DLA quality and technical requirements, including SAE AS9100 higher-level quality standards, CMMC Level 2 certification, and the maintenance of supply chain traceability documentation. Inspection and acceptance will occur at the origin, and the contractor is responsible for proper physical identification and marking of the items. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring authorized access to technical data and compliance with the US/Canada Joint Certification Program.

FLUID HANDLING DIVISION

POSTED

DEADLINE

54--LADDER,ADJUSTABLE

Solicitation # SPE8E526T4156

DLA Troop Support is soliciting quotes for the procurement of adjustable ladders under NSN 5440010493398. The requirement consists of two line items: 170 units to be delivered within 287 days after order and one unit to be delivered within 30 days after order, both shipping to DLA Distribution W1A8. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332999. Interested and responsible sources must submit their quotes electronically by the deadline of September 14, 2026. The solicitation was posted on September 2, 2026, under solicitation number SPE8E526T4156. All inquiries and submissions should be directed through the specified electronic channels or the DLA Dibbs portal.

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-069P

This contract is for the procurement of nonmetallic tubing, identified by NSN 4720-01-628-1565 and McMaster-Carr part number 5041K531. The order consists of two feet of tubing with a quantity variance allowance of plus 10 percent and minus 0 percent. Delivery is required within five days after the order is placed, with the final destination and inspection point located at the DLA LMP Zone 1 facility in Texarkana, Texas. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires shipping via the fastest traceable means. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that government identification must be removed from any non-accepted supplies. The original required delivery date is set for September 2, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

COVER, PROTECTIVE, GUIDE

Solicitation # SPE4A7-26-T-709H

This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of one protective cover for a guided missile end section, identified by NSN 8140-01-286-5058. The contract requires delivery within five days after the order is received and adheres to specific DLA packaging and quality requirements. The agreement contains strict security and regulatory mandates, including the protection of covered defense information and adherence to export control laws under ITAR and EAR. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training. All supplies must be free of government identification if not accepted, and the procurement is governed by the DLA Master List of Technical and Quality Requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-26-T-068A

This contract is for the procurement of one nonmetallic hose assembly, identified by NSN 4720014966446 and Tru-Hitch part number 01115. The order is managed under solicitation SPE7M0-26-T-068A for the Department of Defense Maritime Supply Chain. Delivery is required within five days after the order is placed, with a required delivery date of September 2, 2026. The shipment is to be delivered FOB Origin to the AWCF SSF at Fort Buchanan. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirement RP001. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the single unit requested.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-377W

This contract is for the procurement of two nonmetallic hose assemblies under solicitation number SPE7M4-26-T-377W. The items are identified by NSN 4720013002993 and correspond to part numbers from Hyster-Yale Group and Parker-Hannifin Corporation. Delivery is required within 20 days, with a final required delivery date of August 18, 2026, shipped FOB destination to the USNS Alan Shepard. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Key technical constraints include a prohibition on Class I ozone-depleting chemicals and the intentional addition of mercury. Additionally, the items are subject to a non-extendable shelf life of 120 months as per requirement RS030.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-377B

This contract is for the procurement of one foot of nonmetallic hose, identified by NSN 4720016435803 and part number HOS7730I3896. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-377B, with a required delivery date of August 28, 2026. Delivery is specified as FOB Origin with a delivery window of 20 days, and the quantity variance is permitted at plus 10 percent and minus 0 percent. The contract mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the requirement for supply chain traceability documentation. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements per RP001. The item is destined for the USS America LHA 6, and shipments must be made via the fastest traceable means, specifically excluding parcel post.

FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-26-T-068Q

This contract, identified as SPE7M0-26-T-068Q, is for the procurement of two nonmetallic hose assemblies, part number 01121 from Tru-Hitch, Inc., under NSN 4720-01-496-6001. The order is managed by the Department of Defense Maritime Supply Chain ESOC Buys with a required delivery date of September 2, 2026, and a delivery window of five days after receipt of order. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The items must be delivered to the AWCF SSF at Fort Buchanan. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirement RP001. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies per requirement RQ011.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-377Y

This contract is for the procurement of 168 non-metallic hose assemblies, identified by NSN 4720-01-276-4955. The assemblies must have a 1/4 inch inner diameter and an overall length of 24 inches. The items are subject to a non-extendable shelf life of 120 months and must be produced by an accredited manufacturer or assembling distributor listed on the Performance Review Institute QML or QPL. Technical specifications are governed by MIL-DTL-13531J(4) and reference specification MS500083E. Delivery is required within 49 days of order, with shipping destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-129 for marking and RP001 for packaging. Quality assurance will be conducted at the destination using sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited in the manufacturing of these items.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-06A2

This contract is for the procurement of two mounting plates, identified by NSN 2510017196727 and part number 2284171 from Crysteel Manufacturing, Inc. The order is managed under purchase request 7018118532 with a delivery requirement of 20 days after order. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging under ASTM D3951 and MIL-STD-129, and the prohibition of Class I ozone-depleting chemicals. Delivery is destined for US Forces 378 ELRS LGRDDC at Prince Sultan Air Base, Saudi Arabia, with a required delivery date of August 27, 2026.

POSTED

DEADLINE

BOX, ACCESSORIES STOWAG

Solicitation # SPE7L4-26-T-6699

This contract is for the procurement of one accessories stowage box, identified by NSN 2540015999655 and Daimler Truck North America part number A22-63756-000. The order is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency under solicitation number SPE7L4-26-T-6699. Delivery is required within five days, with a required delivery date of September 2, 2026, and shipping is designated as FOB Origin. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. If the material is hazardous, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is required. The item is to be shipped to a facility in Kaiserslautern, Germany, with inspection and acceptance occurring at the destination.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-25PJ

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-25PJ, is for the procurement of two Swivel, Jaw and Jaw units with the National Stock Number 4030-00-838-1282. The contract requires delivery within 238 days after order and is categorized under NAICS code 332999, with the place of performance located in New Cumberland. A critical component of this requirement is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract entails the manufacture and delivery of 148 precision-machined bipods designed for sniper rifles, adhering strictly to military specifications for performance, durability, and fit. Each unit must be produced to exacting tolerances and undergo rigorous quality control to ensure reliability in operational environments. The deliverables include complete packaging and labeling compliant with MIL-STD-129 and DLA RP001 standards, ensuring proper identification, traceability, and handling throughout the logistics chain. All items are to be delivered to the specified place of performance in New Cumberland, Pennsylvania, with the delivery timeframe tied to the contract’s response deadline of July 27, 2026. This is a subcontract opportunity under the NAICS code 332999, categorized under Department of Defense procurement, and managed by the LAND SUPPLIER OPNS VEHICLE SPT office. Participation requires full compliance with defense contracting requirements, including potential security and supply chain safeguards, though no set-aside status is specified.

General Info

Manufacture and deliver 148 military-spec bipods to New Cumberland by July 27, 2026, with compliant packaging and quality control.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-26-T-120K.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

POD-LOC, BIPOD, SNIPE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 148 precision-machined bipods for sniper rifles compliant with military specifications, including packaging and labeling per MIL-STD-129 and DLA RP001.