Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Pressure Leak Testing and Quality Assurance Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
DIBBS
Contractor First Article Testing (FAT) Services
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
DIBBS
GOVERNMENT FIT VERIFIC
Solicitation # SPE7L3-26-Q-1328
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.
Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

in 17 days
NAICS: 541380
New
International
City of Red Deer - Request for Quotes - WTP - Laboratory Water Analysis
Solicitation # AB-2026-06241
The City of Red Deer is seeking quotations from qualified vendors to provide laboratory water analysis services for its Water Treatment Plant. This solicitation, identified by number AB-2026-06241, is aimed at securing professional analytical services to support the city's water treatment operations in Red Deer, Alberta. Interested respondents must submit their quotations by the deadline of October 2, 2026, at 10:00 PM. The procurement process is managed by Lindsey Flaman, the Procurement and Contract Specialist, who serves as the primary point of contact for this opportunity.
City of Red Deer

POSTED

about 13 hours ago

DEADLINE

in 21 days
NAICS: 541380
New
SLED
Geotechnical Investigation & Lab Testing
Department of Environmental Protection

POSTED

about 14 hours ago

DEADLINE

in 4 days
NAICS: 541380
New
Federal
Non-Destructive Testing (NDT) & Inspection
Ok DLA Aviation At Oklahoma City

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
Federal
Functional Characterization and Assay Laboratory Services
FDA Office Of Acq Grant Svcs

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
DIBBS
First Article Testing and Production Lot Validation
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
Federal
Water Quality Analytical Testing (Public Water Supply & PFAS)
Colorado State Office

POSTED

about 17 hours ago

DEADLINE

in 4 days
NAICS: 541380
New
DIBBS
Ballistic Coupon & First Article Testing Services
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
DIBBS
Ballistic and First Article Testing (FAT) Services
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 6 days
NAICS: 541380
New
Federal
2026 RFO HAYSTACK WELL WATER ANALYSIS
Solicitation # 140L1726Q0065
Colorado State Office

POSTED

about 17 hours ago

DEADLINE

in 4 days
NAICS: 541380
New
Federal
Hood Inspection and Certification for Laboratory Service
Solicitation # 36C24426Q0840
244-NETWORK Contract Office 4 (36C244)

POSTED

about 17 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

The contract requires the execution of 100 percent pressure leak testing on containers in strict compliance with Federal Test Method Standard 101C, ensuring every unit is thoroughly evaluated for integrity under controlled pressure conditions. Comprehensive documentation and full traceability of all test results must be maintained throughout the process to guarantee quality assurance and regulatory adherence. The work falls under the NAICS code 541380 and is structured as a subcontract under the Department of Defense, specifically through the Pa DLA Aviation office in Philadelphia. All tasks must be completed by the deadline of June 5, 2026, at 6:00 PM, with performance expected to meet exacting defense standards for reliability and accuracy.

General Info

Perform 100% pressure leak testing on containers per Federal Standard 101C with full documentation.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126RVB03.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

81--SHIPPING AND STORAG

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform 100% pressure leak testing on containers using Federal Test Method Standard 101C with full documentation and traceability.

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 332439
New
Federal
81--CONTAINER,SHIPPING
Solicitation # SPRPA126RVC30
This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.
Other Metal Container Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC10
This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.
Other Metal Container Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--PUMP,WINDOW WASHER
Solicitation # SPRPA126QUB47
This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336413
New
Federal
15--DOOR,ACCESS,AIRCRAF
Solicitation # SPRPA126QUC06
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--FIRE CONTROL PANEL
Solicitation # SPRPA126QUC04
This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
66--TRANSDUCER,MOTIONAL
Solicitation # SPRPA126QUB95
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--TAXI,NOSE GEAR,AIR
Solicitation # SPRPA126QUC02
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
48--VALVE,CROSS
Solicitation # SPRPA126QUC03
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC35
This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--CABIN TEMPERATURE I
Solicitation # SPRPA126QUB92
This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
NRP,FWD FAIRING ASS
Solicitation # SPRPA126QUB93
This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--NRP,SHIPPING AND ST
Solicitation # SPRPA126RVC02
This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS