Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

PROBE, TEMPERATURE MONI

Active
SPE2DS-26-T-447EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Request for Quotations, issued by DLA Troop Support under solicitation number SPE2DS-26-T-447E, is for the procurement of adult temperature monitoring probes, identified by NSN 6515-01-714-6719. The requirement is for one package containing 20 units. The items are classified as Type I (Code S) with a strict, non-extendable shelf life of 60 months. A critical delivery constraint specifies that no more than nine months may elapse between the date of manufacture and the date of delivery to the government. All products must be labeled with the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. The contract incorporates various technical and quality requirements from the DLA Master List, including specific packaging standards under MIL-STD-2073-1E and marking requirements under MIL-STD-129 and Medical Marking Standard No. 1. Delivery is required to Camp Pendleton, CA, via the fastest traceable means, excluding parcel post, with inspection and acceptance occurring at the destination. Compliance with several federal regulations is mandatory, including the Buy American Act, the Berry Amendment, and cybersecurity safeguarding standards. Offerors must submit their quotes through the DLA Internet Bid Board System (DIBBS) by the specified deadline, and successful contractors must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports.

General Info

DLA seeks 20 adult temperature probes for delivery to Camp Pendleton, CA.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

BOX 555627, CAMP PENDLETON, CA, 92055-5627, USA

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-447E Request for Quotations

PDF19 pagesrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
PROBE,TEMPERATURE MONITORING
PROBE<(>,<)> TEMPERATURE MONITORING
ADULT TEMPERATURE PROBE
MOVES SLC, TEMPERATURE PROBE, ADULT (20 PK)
UNIT OF ISSUE: PACKAGE (PG)= 20 EACH
.
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN NINE MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-714-6719 Quantity: 1 PG Purchase Request: 7018354906QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339114
New
DIBBS
PRESSURE GAUGE, DENTAL
Solicitation # SPE2DS-26-T-449E
This solicitation, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for a dental equipment pressure gauge assembly, identified by NSN 6515-01-594-0936. The procurement is for a single unit under a fixed-price contract type. Interested offerors must submit their quotes through the DLA Internet Bid Board System (DIBBS). The requirement includes specific delivery destinations to the USS America LHA 6 and the USNS Comfort TAH 20, with inspection and acceptance occurring at the destination. While the solicitation may be a candidate for automated award, any proposed alternate products must be accompanied by complete technical data, including drawings and specifications, or they will not be evaluated. The contract incorporates rigorous technical, quality, and regulatory standards. Packaging must be commercial and comply with MIL-STD-2073-1E and DLA packaging requirements, while marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Significant regulatory compliance is required, including adherence to the Buy American Act, the Berry Amendment, and DFARS provisions regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Additionally, contractors must comply with hazardous material labeling standards and various socioeconomic and labor protections, such as provisions regarding combating trafficking in persons and equal opportunity for workers with disabilities. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Dental Equipment and Supplies Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS