Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Process Control & Data Logging System (HMI/SCADA)

Active

Federal

Response Deadline08/27/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the design and integration of a human-machine interface and supervisory control and data acquisition system to monitor, record, and analyze critical process parameters including temperature, flow, speed, and humidity for enhanced traceability and operational optimization. This subcontract is part of a broader initiative under the Department of Energy’s contractor alliance for energy innovation, with performance located in Golden, Colorado, 80401. The required system must ensure comprehensive data logging and real-time monitoring capabilities to support process improvements and compliance with operational standards. The solicitation was posted on August 5, 2026, with proposals due by August 27, 2026, and is classified under NAICS code 541330 for engineering services. The contract does not specify a set-aside type or eligible organization classifications, and no point of contact information is provided. All work must be completed at the designated place of performance and must fully align with the technical requirements for process control and data integrity without reliance on external documentation or references.

General Info

Design and integrate HMI and SCADA system in Golden, Colorado for real-time monitoring of process parameters.

Agency

Department Of Energy → Llc - DOE Contractor Alliance For Energy InnovationView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Golden, CO, 80401, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 11:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Llc - DOE Contractor Alliance For Energy Innovation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Llc - DOE Contractor Alliance For Energy Innovation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design and integration of an HMI/SCADA system to monitor and log all process parameters including temperature, flow, speed, and humidity for traceability and optimization.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, focusing on professional engineering and environmental services such as surveying, geotechnical analysis, permitting, public outreach, and utility location. The project seeks participation from certified Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible small business groups, including those certified under SBA programs like SDB, WOSB, VOSB, and SDVOSB, with a specific emphasis on DBE status under the Department of Transportation. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with full proposals due by September 15, 2026. The work falls under NAICS code 541330 and other related codes, and performance will occur within California.

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, a municipal groundwater well initiative in California to replace and decommission the existing Corydon well. The project is divided into two phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and abandonment, and full-time on-site construction management oversight compliant with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well. Key technical specifications require a 24-inch stainless steel Ful-Flo louvered screen matching the existing casing depth, vertical turbine pump equipment, and discharge piping tied to the Corydon Blend station and Malaga blending location, all in accordance with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Proposals must include a Preliminary Design Report with up to 30% design effort, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and record drawing development along with commissioning and operator training support. The solicitation is structured as a Request for Proposals with evaluation weighted toward demonstrated competence and professional qualifications, where relevant experience and team qualifications account for 25%, understanding of project scope and approach for another 25%, scope and schedule feasibility for 20%, innovation for 10%, cost value for 10%, and overall proposal quality for 10%. Cost is not the sole determinant; the highest-ranked firm will be negotiated with for a mutually agreeable scope and fee, with a not-to-exceed dollar limit expected. Respondents must submit all required certifications and forms through Attachment “2”, including American Iron and Steel Certification, Debarment and Suspension Certification, System for Award Management (SAM) Information, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Registration, and Executive Order N-6-22 Certification for Russia sanctions compliance. Subcontractors must be identified and their DBE status documented, along with explanations if not selected. The proposal must conform to Build America Buy America Act requirements, including sourcing documentation and waiver procedures for non-compliant materials, and adhere to telecommunications restrictions under Section 889, prohibiting Huawei and ZTE equipment. Proposals must be submitted via the PlanetBids

Ardurra Group, Inc.

POSTED

about 3 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction for a water infrastructure upgrade in Lake Elsinore, California. The contract, identified as C2305, involves comprehensive engineering expertise to ensure the replacement of the existing well system meets regulatory, operational, and safety standards. Services include planning, technical design, preparation of bid documents, and ongoing field support throughout construction to maintain project integrity and adherence to specifications. The solicitation is open to Disadvantaged Business Enterprises under Department of Transportation guidelines, with NAICS code 541330 for architectural and engineering services. Proposals are due by September 1, 2026, and the primary point of contact for inquiries is Katie Neubauer of AKM Consulting Engineers, reachable via phone or email. The project is positioned to enhance local water supply reliability and is part of broader infrastructure improvement efforts in Riverside County.

AKM Consulting Engineers

POSTED

about 3 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design, construction support, and comprehensive engineering services required to replace the existing Corydon groundwater production well with a new facility while permanently abandoning the old well in full compliance with California State Water Resources Control Board and Riverside County regulations. The scope includes hydrogeological evaluation, aquifer analysis, municipal well design, borehole geophysical logging, site civil and structural engineering, utility coordination, environmental permitting, water quality sampling, and full-time construction management during the drilling phase, followed by engineering oversight during the well equipping and commissioning phase. Technical specifications mandate a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth, with sanitary seal placement consistent with AWWA standards. The project is divided into two phases: Phase 1 focuses on technical specifications, civil design, line-bid items, bidding support, and on-site construction management, while Phase 2 covers architectural, mechanical, electrical, instrumentation, and controls design for final facility equipping. All work must adhere to the Build America, Buy America Act and 2 CFR Part 184, requiring domestic sourcing of iron, steel, and manufactured products, along with rigorous certification and documentation of origin. The project is funded by a $400,000 Bureau of Reclamation grant and non-Federal cost share, subjecting it to the full scope of federal compliance requirements including 2 CFR Part 200, Davis-Bacon, Clean Air Act, and Federal Water Pollution Control Act provisions, which must be flowed down to subconsultants exceeding $150,000. Proposals must include detailed cost breakdowns by task, hourly rates, travel expenses, and a not-to-exceed total fee capped at $1,000,000, submitted via the PlanetBids portal by September 1, 2026, with mandatory certifications for debarment status, SAM registration, executive order N-6-22 compliance, lobbying restrictions, insurance, conflict of interest, and DBE subcontractor participation. Evaluation prioritizes demonstrated qualifications and project experience (25%), technical understanding and approach (25%), schedule and scope clarity (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with award based on competence rather than lowest price. Successful contractors must maintain accurate records for four years post-final payment, submit monthly itemized invoices with progress reports, and adhere to a project timeline running from November

GEI Consultants, Inc.

POSTED

about 3 hours ago

DEADLINE

RFP - Consulting Services - Lanyard Safety System

Solicitation # ER-PW-1-2026

The City of Moose Jaw is seeking qualified engineering consulting firms to deliver professional services related to the design and implementation of a Lanyard Safety System, through a formal Request for Proposal process identified as ER-PW-1-2026. Proposals must be submitted electronically to procurement@moosejaw.ca no later than August 25, 2026, at 2:00 p.m. Central Standard Time, with all necessary documentation available on the city’s website at www.moosejaw.ca/tenders and through the Saskatchewan Public Sector tendering portal. The engagement requires technical expertise in safety system engineering, with proposals expected to demonstrate capability, experience, and compliance with municipal standards and practices. All submissions must align with the requirements outlined in the solicitation materials, which include technical specifications, deliverables, timelines, and evaluation criteria. The contract is intended for work to be performed within Saskatchewan, and inquiries should be directed to the primary point of contact, CMJProcurement, at the provided email. The solicitation is open to all qualified firms with no set-aside limitations, and responses must be received by the stated deadline to be considered. Late or incomplete submissions will not be accepted.

City of Moose Jaw

POSTED

about 3 hours ago

DEADLINE

Engineering Services - Airport and Aviation Planning Services

Solicitation # RFP2700030

Chesterfield County in Virginia is soliciting engineering services focused on airport and aviation planning under solicitation number 41-144650. The opportunity, posted on August 6, 2026, requires proposals to be submitted by September 10, 2026, and is open to entities capable of providing professional planning and engineering support related to airport infrastructure and aviation systems. The work will be performed in Chesterfield, Virginia, with a zip code of 23832, and the primary point of contact for inquiries is Vin Kamatchi, reachable via email at kamatchiv@chesterfield.gov or by phone at 804-717-6342. This solicitation is categorized under state, local, or educational government procurement and does not specify a set-aside classification or NAICS code, indicating it is open to all qualified respondents without preferential treatment based on business size or ownership type. All submissions must be made through the designated online portal linked in the solicitation details.

Chesterfield County

POSTED

about 3 hours ago

DEADLINE

in about 1 month

RFP for Engineering designs for 2 culverts

Solicitation # 75031

The Town of Wolcott is soliciting engineering bids for the design of two culvert replacements: Culvert ID 5-25 on Marsh Road and Culvert ID 9-6 on Town Hill Road in Wolcott, Vermont, with funding provided by FEMA. Bidders must submit separate, itemized proposals for each culvert, including all fees and timelines associated with obtaining necessary permits. Design work must comply with Vermont stream alteration standards and U.S. Army Corps of Engineers permitting requirements, building upon hydrologic studies previously completed by VTrans. A voluntary pre-bid site inspection is scheduled for August 13th, 2026, beginning at 8:30 a.m. at Culvert 5-25, located 0.27 miles southeast of 454 Marsh Road, followed by a second stop at Culvert 9-6 between 916 and 976 Town Hill Road at approximately 9:10 a.m. All bid submissions must be received by 2 p.m. EDT on August 28th, 2026, via email, mail to PO Box 100, Wolcott, VT 05680, or hand delivery to 28 Railroad Street. Bids will be opened publicly on August 31st, 2026, at 10 a.m. The Town retains full discretion to accept or reject any or all bids without explanation. Additional information, including the state hydrologic studies and this request for proposal, is available online at www.wolcottvt.org or by contacting Michelle at 802-888-2746.

Department of Economic Development

POSTED

about 5 hours ago

DEADLINE

Construction Phase Engineering Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Mechanical & Pumping Systems Engineering

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Re-Bid of Professional Engineering Services for Lift Station 2 – Design & Permitting

Solicitation # 26-ITB-012

The City of South Daytona, Florida is soliciting bids for the re-bid of professional engineering services related to Lift Station 2, encompassing design and permitting functions. This solicitation, identified as 26-ITB-012, is open to qualified engineering firms capable of delivering technical expertise in wastewater infrastructure projects. The proposal must be submitted by September 9, 2026, with inquiries and communications directed to Becky Witte, Deputy City Clerk, via email or phone provided in the solicitation. The work is to be performed within South Daytona, a residential and business-friendly community bordered by the Halifax River and situated near the Atlantic Ocean beaches, with services to support the city’s essential infrastructure needs. The contracting authority is the Finance Department of the City of South Daytona, operating under the state of Florida, with no set-aside provisions specified, allowing open competition among eligible firms.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Environmental and Planning IDC/IDIQ

Solicitation # W912P726RA029

This solicitation is a pre-solicitation for a Small Business Set Aside Indefinite Delivery/Indefinite Quantity (IDIQ) contract under the Brooks Act, targeting a total capacity of $20 million with a guaranteed minimum of $2,500. The contract will be awarded to a single qualified small business firm to provide comprehensive environmental, planning, and engineering services primarily within the U.S. Army Corps of Engineers San Francisco District and secondarily across other South Pacific Division districts, covering California, Nevada, Utah, Arizona, and portions of Oregon, Idaho, Colorado, and Wyoming. Services include NEPA documentation, ecological and cultural resource assessments, sediment analysis, water resource planning, economic modeling, community engagement, GIS and CADD design, and engineering for natural and structural solutions such as levee setbacks, living breakwaters, and flood risk management. The contract will span five years, including a 36-month base period and one 24-month option, with performance governed by USACE engineering regulations and compliance with the Service Contract Act. Professional labor rates will be negotiated and escalated annually based on contract terms. Selection will prioritize demonstrated specialized experience and technical competence in water resources projects, followed by qualifications of key personnel, past performance, capacity to execute multiple concurrent task orders, and regional familiarity with the project area. Applicants must submit a completed Standard Form 330, including project examples, resumes of key staff, team organization charts, and a quality management plan, all not exceeding 70 pages. The submission deadline is 3:00 PM PDT on August 26, 2026, via the PIEE system, and firms must be registered in SAM with a valid UEI. The pre-proposal conference has been rescheduled to 2:30 PM PDT on August 10, 2026. The North American Industry Classification System code is 541330, and the small business size standard is $22.5 million in average annual receipts, though eligibility extends to firms with up to $25 million in receipts over the last three fiscal years. The anticipated award date is December 2026, and only electronic submissions are accepted.

W075 Endist San Fran

POSTED

about 7 hours ago

DEADLINE

PD-44-0123; Advanced Electrical Power Systems Services

Solicitation # N64498-26-44-0123

The Naval Surface Warfare Center Philadelphia Division is conducting market research through a Request for Information (RFI) issued under solicitation number N64498-26-44-0123 to gather capabilities data for engineering, technical, logistics, and installation support services related to advanced electrical power systems and integrated power and propulsion systems on U.S. Navy vessels. Respondents must submit unclassified, electronic responses via email to Jenny.e.Tomeo.civ@us.navy.mil by 6:00 PM EST on August 19, 2026, with the solicitation number included in the subject line. This RFI is strictly for planning purposes under FAR Part 10 and does not constitute a solicitation for proposals or a commitment to award a contract; the government will not pay for responses or reimburse any costs incurred in preparing them. Responses must include company details such as name, address, phone, primary contact, email, applicable NAICS codes, business size, socioeconomic status, and DUNS number, along with capability statements describing current or modifiable products and services that meet the requirements outlined in the Statement of Work. All submitted materials become government property and will not be returned. The work scope involves supporting critical Navy programs including DDG 1000, DDG 51 Flight III, AMDR PCM, and BBG(X), with tasks encompassing systems engineering, design and sustainment, installation, troubleshooting, preventive and corrective maintenance, shipboard alterations, and technical documentation development such as functional block diagrams, one-line schematics, engineering analyses, and interface designs. Contractors must comply with military standards including MIL-DTL-901, MIL-STD-167, MIL-STD-461, MIL-STD-810, and NAVSEA technical manuals, and support the Government’s electronic cost reporting system (eCRAFT). Personnel must be U.S. citizens with a SECRET security clearance at award, with an interim clearance acceptable; facility security clearance must be acquired within 60 days post-award. SIPRnet access is required for certain program areas, and all systems handling Controlled Unclassified Information must adhere to NIST SP 800-171. Contractors must also comply with DFARS counterfeit part prevention requirements, implement information assurance certifications per DoD 8570.01-M, execute NDAs for personnel accessing PPBE data, and appoint a Facility Security Officer to oversee compliance with NISPOM.

Nswc Philadelphia Division

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Energy → Llc - DOE Contractor Alliance For Energy Innovation

Same awarding agency

Offline Dip-Coating System for Hollow FibersAn offline dip-coating system is being sought to apply functional coatings with precise thickness and uniformity onto hollow fibers, synchronized precisely with the line speed of the fiber production process. The system must ensure consistent coating application without disrupting the continuous fiber flow, enabling high-quality surface modifications critical for advanced material performance. The technology must be capable of handling the unique challenges of hollow fiber substrates, including maintaining coating integrity across internal and external surfaces while accommodating varying diameters and flow rates. The opportunity is issued as a subcontract under the NAICS code 333291 and is managed by the Department of Energy through its contractor alliance for energy innovation. The place of performance is designated as Golden, Colorado, with a response deadline of August 27, 2026. The solicitation does not specify a set-aside type or point of contact, and interested parties are directed to the provided SAM.gov link for submission details. The project emphasizes innovation in manufacturing precision coating systems tailored for energy-related applications involving hollow fiber technologies.

Paper Industry Machinery Manufacturing

POSTED

DEADLINE

Humidity & Gas-Controlled Spinneret EnclosureA precision-machined spinneret enclosure is being procured to enable the extrusion of oxidation-sensitive chemistries in fiber production through controlled environmental conditions. The enclosure must incorporate an inert gas blanket and active humidity control to prevent degradation of sensitive materials during high-precision manufacturing, ensuring process integrity and product quality. This requirement is critical for applications involving advanced materials where even minor exposure to moisture or oxygen could compromise structural performance or chemical stability. The contract is issued as a subcontract under NAICS code 332721, with a response deadline of August 27, 2026, and a posted date of August 5, 2026. The performance location is specified as Golden, Colorado, 80401, and the solicitation is managed by the Department of Energy through its DOE Contractor Alliance for Energy Innovation. The scope implies technical expertise in metallurgy, gas delivery systems, environmental sensing, and precision machining, targeting subcontractors with experience in high-purity manufacturing environments for energy innovation initiatives.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Automated Fiber Pulling & Winding SystemThe contract is for the supply of an advanced automated fiber pulling and winding system designed specifically for the production of hollow fibers, with operational speed requirements between 2 and 35 meters per minute and stringent demands for tension and alignment precision. The system must ensure consistent quality and dimensional accuracy throughout the fiber manufacturing process, enabling high-efficiency output suitable for energy innovation applications. The equipment will be delivered to a performance location in Golden, Colorado, with a zip code of 80401, and is scoped under NAICS code 333248, which classifies it within the industrial machinery manufacturing sector. This is a subcontract opportunity posted by the Department of Energy through its LLC - DOE Contractor Alliance for Energy Innovation, with responses due by August 27, 2026. While no set-aside provisions or specific organizational requirements are indicated, the procurement is targeted at suppliers capable of delivering highly engineered, precision automation systems tailored to advanced material manufacturing. The contract emphasizes technical performance over commercial procurement, requiring deep expertise in fiber optics, tension control mechanics, and synchronized industrial automation. Interested parties must submit proposals prior to the deadline through the official SAM.gov portal linked in the solicitation.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Multi-Vessel Polymer Solution Mixing & Supply SystemA temperature-controlled, multi-vessel system must be designed and supplied for the precise mixing and delivery of polymer solutions used in membrane casting processes, ensuring consistent quality and operational reliability. The system must maintain strict thermal regulation throughout all stages of solution preparation and delivery to meet the demanding specifications of advanced membrane fabrication. This subcontract is part of a Department of Energy initiative led by the LLC - DOE Contractor Alliance for Energy Innovation, with performance required at a facility in Golden, Colorado, ZIP 80401. The opportunity, classified under NAICS code 333999, is open for bids through August 27, 2026, and targets specialized manufacturers capable of delivering integrated engineering solutions for high-precision industrial applications in energy innovation.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

High-Temperature Coagulation & Rinse Bath System SupplyThe contract entails the supply and integration of specialized temperature-controlled coagulation and rinse bath systems designed for use in membrane formation processes. These systems must exhibit robust chemical resistance to acids, bases, and organic solvents, ensuring durability and operational integrity under harsh chemical environments. The equipment is critical for precise process control and must maintain consistent thermal performance during extended operation, supporting high-purity membrane production requirements. The solicitation is issued as a subcontract under the Department of Energy’s Contractor Alliance for Energy Innovation, with a response deadline of August 27, 2026. The place of performance is located in Golden, Colorado, with a ZIP code of 80401. The North American Industry Classification System code 332439 indicates the scope relates to other metal processing machinery manufacturing, aligning with the custom engineering and fabrication demands of the required systems. The contract will proceed without a set-aside designation, and interested parties must submit proposals by the stated deadline to support the DOE’s broader energy innovation initiatives.

Other Metal Container Manufacturing

POSTED

DEADLINE

Hollow Fiber Membrane Fabrication Equipment Design & IntegrationThe contract entails the comprehensive design, engineering, and integration of a modular pilot-scale hollow fiber production line equipped with multi-extrusion capabilities and precision environmental controls, specifically tailored for membrane research and development. The system must enable scalable and reproducible fabrication of hollow fiber membranes under tightly regulated conditions to support advanced material testing and process optimization in a controlled laboratory setting. Emphasis is placed on modularity to allow for future reconfiguration and expansion, ensuring long-term adaptability for evolving R&D requirements. The work is to be performed at a designated facility in Golden, Colorado, with a firm deadline for proposal submission on August 27, 2026. This subcontract falls under NAICS code 333242, indicating it involves the manufacturing of other industrial machinery and equipment. The contracting entity is the DOE Contractor Alliance for Energy Innovation, operating under the Department of Energy, with the project aligned to support energy innovation initiatives. Participation is open to qualified entities capable of delivering a technically sophisticated, integrated system capable of meeting the rigorous demands of membrane science development.

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Pilot-Scale Membrane Research Line

Solicitation # RFI-2026031392

The Alliance for Energy Innovation, LLC, a DOE contractor, has issued Request for Information RFI-2026031392 to explore industry capabilities for providing a Pilot-Scale Membrane Research Line. This RFI is not a solicitation for proposals or a commitment to award a contract but serves solely to gather market intelligence on current technologies, capacities, and innovations relevant to pilot-scale membrane research systems. The response deadline is set for September 3, 2026, and all submissions must be received by 11:00 PM Eastern Time. The NAICS code associated with this effort is 333248, covering specialized machinery manufacturing for research and development applications. The office responsible for managing this RFI is based in Golden, Colorado, with the place of performance also located in Golden at ZIP code 80401. Primary point of contact for inquiries is Paul Wilke, reachable via email at ASP.Responses@nlr.gov. The solicitation is categorized as a special notice under the Department of Energy’s organizational structure, with no set-aside provisions specified. Interested parties are directed to the SAM.gov workspace link for additional details and formal submission procedures. All responses will be used to inform future procurement planning and technical requirements.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Pilot-Scale Hollow Fiber Fabrication Line

Solicitation # RFI-2026031395

The Alliance for Energy Innovation, LLC, acting as a Department of Energy contractor, has issued a Request for Information titled Pilot-Scale Hollow Fiber Fabrication Line under solicitation number RFI-2026031395. The purpose of this RFI is to conduct market research to assess the current capabilities of potential vendors capable of supplying a pilot-scale hollow fiber fabrication line, with no intent to award a contract at this time. Responses are due by August 27, 2026, and must be submitted through the designated SAM.gov portal to the primary point of contact, Paul Wilke, at ASP.Responses@nlr.gov. This solicitation is classified as a special notice and falls under NAICS code 333248, which pertains to other industrial machinery manufacturing. The office responsible for this RFI is located in Golden, Colorado, with the place of performance also designated within the same city and zip code. No set-aside type is specified, meaning all eligible entities may respond without restriction based on business size or other socioeconomic categories.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Project Management & Commissioning ServicesThe contract is for end-to-end project management services focused on the scheduling, coordination, commissioning, and documentation of audiovisual system deployments across multiple locations. All activities must be executed with precision to ensure seamless integration and operational readiness of AV systems at every site, with comprehensive documentation maintained throughout the process. The work is classified under NAICS code 541611, indicating it falls under management consulting services, and is structured as a subcontract under the Department of Energy’s Contractor Alliance for Energy Innovation. Performance is required at a single location identified by zip code 80401, though deployments may span additional sites as needed. The opportunity was posted on July 24, 2026, and responses are due by August 21, 2026, with no set-aside provisions specified. The contract emphasizes technical coordination and accountability in delivering complex AV installations under strict timelines and quality expectations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

AV Maintenance, Repair & On-Call Support ServicesThe contract encompasses ongoing maintenance, troubleshooting, and repair of audiovisual systems across five NLR campuses, requiring 24-hour onsite response capability to ensure uninterrupted operation of critical AV infrastructure. Services must be delivered promptly and reliably to support educational and operational needs at all times, with a strict expectation of immediate technical intervention for any system failure or performance issue. The contract is classified as a subcontract under NAICS code 811212, issued by the Department of Energy through its contractor alliance, with performance centered at a location with zip code 80401. Proposals must be submitted by August 21, 2026, following a posting date of July 24, 2026. While specific details about the contracting entity or point of contact are not provided, the requirement for continuous onsite availability underscores the high-dependency nature of the AV systems on these campuses and the need for a vendor capable of rapid, round-the-clock support.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Installation of Secure/Classified AV Systems (SCIF/Classified Rooms)The contract entails the design, installation, and commissioning of secure audiovisual systems in Sensitive Compartmented Information Facilities and multi-class conference rooms, with strict requirements for secure signal isolation and full TEMPEST compliance to prevent electronic eavesdropping and data leakage. All work must be executed to meet federal security standards for handling classified information, ensuring that AV equipment and infrastructure eliminate unintended electromagnetic emissions and maintain integrity in high-threat environments. The scope includes end-to-end system integration with emphasis on hardware selection, cabling, signal routing, and testing protocols certified for use in secure facilities. The solicitation is classified as a subcontract under NAICS code 238220 for specialized construction services, issued by the Department of Energy through its contractor alliance for energy innovation. Performance is required at a location with ZIP code 80401, and responses must be submitted by August 21, 2026. The posting date indicates this opportunity was made available in mid-2026, aligning with future project timelines for secure facility upgrades. Bidders must demonstrate proven experience with TEMPEST-certified AV systems and familiarity with DoE security protocols to qualify. No set-aside provisions or specific organization type restrictions are specified, but compliance with federal security and technical standards is mandatory.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

AV Programming & Control System IntegrationThe contract seeks programming and integration services for audiovisual control systems using Crestron and QSC platforms, requiring seamless coordination with room automation, video walls, and conferencing technologies. The work involves designing, configuring, and deploying advanced AV control solutions tailored to ensure reliable, user-friendly operation across complex multi-room environments. Technical expertise in system architecture, scripting, firmware integration, and troubleshooting is essential to meet performance and compatibility standards. This subcontract is issued under the Department of Energy’s Contractor Alliance for Energy Innovation with a place of performance set at zip code 80401. The opportunity was posted on July 24, 2026, and responses are due by August 21, 2026, with no set-aside classification specified. The NAICS code 541511 classifies the work as computer systems design and related services. All proposers must be prepared to deliver fully functional systems compliant with industry best practices, though no direct point of contact or specific agency office details are provided.

Custom Computer Programming Services

POSTED

DEADLINE