This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PROCUREMENT OF MICROPHONE FOR USE ON MH-65

Closed

70Z03826QB0000206Federal

Submission Closed09/04/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation 70Z03826QB0000206 is a combined synopsis and request for quotation issued by the Department of Homeland Security Aviation Logistics Center for the procurement of ten microphones for use on MH-65 aircraft. This requirement is a Total Small Business Set-Aside under NAICS code 336413, with a firm-fixed price purchase order to be awarded to the lowest-priced technically acceptable offer. The closing date for submissions has been extended to September 4, 2026, at 9:00 am EDT. All provided parts must be approved according to Federal Aviation Administration guidelines and maintain clear, auditable traceability to the Original Equipment Manufacturer, Northern Airborne Technology Ltd. While Northern Airborne Technology is the manufacturer, rights are retained by Chelton Avionic, Inc. Newly manufactured items require a Certificate of Conformance and traceability to the OEM. Alternate part numbers are acceptable, provided they meet the required airworthy commercial or military specifications. Quotes must be submitted via email to the primary point of contact, Alex-Marie Midgett, and must include the solicitation number in the subject line.

General Info

DHS seeks FAA-approved MH-65 aircraft microphones from small businesses by September 2, 2026.

Agency

Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Contract Value

$77,101.2

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

QUALITY AEROPARTS, INC.

Award Issued Date

09/09/2026, 12:00:00 AM UTC

Documents

70Z03826QB0000206 Terms and Conditions

26 pages · rfq

High

Requirements 70Z03826QB0000206 - Quote/requirements sheet

1 page · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedAug 27

Combined Synopsis

Notice updatedAug 31

Response deadline changed from Sep 2, 2026 to Sep 4, 2026. The notice description changed.

Response DeadlineSep 4

Deadline has passed

Submission Closed

09/04/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Contacts2 people available

OfficeElizabeth City, NC, 27909, USA

Organization / AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Office AddressElizabeth City, NC, 27909, USA

Contacts

Alex-Marie Midgett

contact@example.gov

+1 (555) 000-0000

Raymond V. Marler

contact@example.gov

Full Description

***The purpose of Amendment 1 is to answer a question asked by a vendor, and to extend the closing date and time to September 4, 2026, at 9:00 am EDT.

Question: “Northern Airborne Technology Ltd. (NAT) is no longer operating as an independent company.

Can you supply another manufacturer?”

Answer: This part is manufactured by Northern Airborne Technology (Cage Code: 3AB01) however, rights are retained by Chelton Avionic, Inc. (Cage Code: 1WZE2).***

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03826QB0000206 is issued as a request for quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect as of November 28, 2025, IAW the Revolutionary FAR Overhaul (RFO).

The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250 employees. This is a Total Small Business Set-Aside requirement. All responsible sources may submit a quotation which shall be considered by the agency.

It is anticipated that a firm-fixed price purchase order will be awarded as a Total Small Business Set-Aside as a result of this synopsis/solicitation. All parts must have clear traceability to the Original Equipment Manufacturer (OEM), Northern Airborne Technology LTD (Cage Code 3AB01). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM approved source.

See attached documents titled:

“Requirements - 70Z03826QB0000206” and

“Terms and Conditions – 70Z03826QB0000206”.

Alternate part numbers will be accepted. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation.

Newly manufactured commercial items will only be procured from sources able to provide a Certificate of Conformance (COC) and traceability to the OEM. The Federal Aviation Regulation, Part 21, outlines certification procedures.

NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY.

Closing date and time for receipt of offers is 02 September 2026 at 9:00 am EDT. Quotes and questions shall be submitted by email to Alex-Marie.B.Midgett@uscg.mil. Please indicate solicitation 70Z03826QB0000206 in the subject line. Phone call quotes WILL NOT be accepted.