Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on July 10, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Professional Engineering Services

Closed
FA8601-12-R-0055Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 AC Water Main Replacement
Solicitation # 2026-RFQ-042
Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.
Public Works

POSTED

about 8 hours ago

DEADLINE

in 14 days

General Info

NAICS

541330 - Engineering Services

Place of Performance

Please see attached Performance Work Statement for Place of Contract Performance., OH, USA

Set-Aside

NONE

Documents

1

Performance+Work+Statement.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts1 person available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts
Diane X. ChenContract Specialist

Full Description

Show more
The Contracting Officer has determined that a Blanket Purchase Agreement may be the most advantageous method for procuring this requirement (See FAR 13.303). A BPA arrangement will involve the below listed requirements: a. The BPA is written for a period of 3 years and during this period the government is only obligated for actual purchases made under the BPA. Therefore, the BPA will not include a minimum or maximum dollar limitation during this three (3) year period. b. The Contracting Officer must approve the price lists your company submits prior to establishing the BPA. Any time during the 3-year period, the contractor can submit a request to increase or decrease its prices. Price lists are valid for a specific period of time; i.e. 28 Sep 12 through 27 Sep 13. TO PROCURE Professional Engineering Services for USAFSAM/ESOH Service Center at Wright-Patterson AFB (WPAFB), OH in accordance with attached performance work statement. The contractor shall perform the tasks outlined in the following list to fulfill the requirements: 4.1 Indoor Air Quality (IAQ). 4.2 Risk Communication Consultation. 4.3 Risk Communication Workshop. 4.4 Risk Communication Facilitation. 4.5 Industrial Operations Risk Assessment. 4.6 Industrial Ventilation Assessments. 4.7 Periodic Industrial Ventilation Validations. 4.8 Respirator Fit Validation. 4.9 Ergonomics Assessment. 4.10 Specific Expanded Standards Audit/Assessment. 4.11 Asbestos Audit (Community). 4.12 Environmental, Safety and Occupational Health Compliance Assessment and Management Program (ESOHCAMP). 4.13 Operational Risk Management (ORM) Program Technical Assessment. 4.14 Sampling. 4.15 Voluntary Protection Plan (VPP) Program Audit/Development. Firms responding shall be able to provide professional engineering services as requested by USAFSAM/ESOH Service Center at Wright-Patterson AFB (WPAFB), OH in accordance with attached performance work statement. To qualify, firms shall be able to perform all tasks in accordance with attached performance work statement. Firms responding should demonstrate technical compliance by having an established performance record in providing professional engineering services outlined in attached performance work statement. Additionally, sales history including recent commercial companies serviced should be included to determine commerciality. Firms responding should indicate whether they are a large or small business. If a small business, please specify the type (e.g. SDVOSB, HUBZone, 8(a), SDB, WOSB, VOSB, etc.). The general definition of a small business is one that is independently owned and operated, is not dominant in the field of operation in which it is proposing on Air Force contracts and with its affiliates; and the average annual receipts does not exceed $14.0 Million. NAICS Code to be used for this acquisition is 541330 "Engineering Services". The Air Force reserves the right to consider a set-aside based upon responses hereto for any subsequent acquisition. Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. FOB Destination. Payment terms by Government Credit card or Wide Area Work Flow Acceptance. Net 30 days. Any information submitted by respondents to this sources sought synopsis is voluntary. The Air Force does not intend to award a contract on the basis of this notice or to otherwise pay for the information solicited. Respondents should not construe this synopsis as a commitment by the Air Force for any purpose. Respondents will not individually be notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), SDB, WOSB, VOSB, etc.). Capabilities package: All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities and product/service specifications related to this effort. Responses may be submitted electronically to the following e-mail address: Diane.Chen@wpafb.af.mil in a Microsoft Word compatible format or mailed to ASC/PKOAB POC: Diane Chen, 1940 Allbrook Dr. Ste 3 Rm 109, Wright-Patterson AFB, OH 45433-5309 to be received no later than 2:00 p.m. Eastern Daylight Time, 25 July 2012. Direct all questions concerning this acquisition to Diane Chen at (937) 522-4584 or at Diane.Chen@wpafb.af.mil.

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS