Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Project Management and Coordination

Active

Federal

Response Deadline08/21/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A dedicated Project Manager is required to oversee the coordination and execution of contract activities under the Project Management and Coordination solicitation, ensuring full alignment with the Performance Work Statement and all contractual obligations. The incumbent will serve as the primary liaison between the Contracting Officer’s Representative and the contractor team, managing project timelines, tracking deliverables, and maintaining strict compliance with all standards and requirements. This subcontract is a Total Small Business Set-Aside under NAICS code 532310, reserved exclusively for small businesses, and is issued by the Department of Defense through W6QM Micc-Ft Bliss with performance expected at Fort Bliss, Texas, 79916. Responses must be submitted by August 21, 2026, by 4:00 PM, and the opportunity was posted on July 27, 2026, with no specified point of contact listed for inquiries.

General Info

Project Manager needed for DoD contract at Fort Bliss, Texas, for small business, due August 21, 2026.

Agency

Department Of Defense → W6QM Micc-Ft BlissView Agency

NAICS

532310 - General Rental CentersView NAICS

Place of Performance

Fort Bliss, TX, 79916, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 04:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Bliss

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QM Micc-Ft Bliss

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide a dedicated Project Manager to coordinate with COR, manage schedule, and ensure full compliance with the PWS and contract requirements.

Similar Contracts

Same NAICS industry code

RFQ - EVENT EQUIPMENT RENTAL SERVICES

San Diego County

POSTED

DEADLINE

Construction Equipment RentalThe contract involves the rental of specialized equipment essential for chip seal operations, including asphalt distributor trucks, chip spreaders, and rollers, to support infrastructure maintenance and pavement application activities. The equipment is required for use by the California Public Works - Engineering and Resource Protection - Engineering Services division, with performance expected to occur within the state of California. The solicitation is classified as a subcontract under NAICS code 532310, which pertains to construction equipment rental and leasing. The posting date is July 22, 2026, and all responses must be submitted by August 6, 2026, at 9:30 PM Pacific Time. The contract does not specify a set-aside classification, and no point of contact or physical address details are provided beyond the state-level jurisdiction. All relevant information and submissions are accessible through the provided online portal link.

Public Works - Engineering and Resource Protection - Engineering Services

POSTED

DEADLINE

Equipment Rental – Aerial & Forestry MachineryThe Texas Department of Transportation is seeking subcontractors to provide rental services for specialized aerial and forestry machinery, including bucket trucks, forestry mowers, chippers, and stump grinders, to support vegetation removal operations. The contract is classified under NAICS code 532310, which pertains to commercial and industrial machinery and equipment rental and leasing, and is intended to facilitate efficient maintenance of right-of-way and vegetation management across state transportation infrastructure. Subcontractors must be prepared to supply equipment that meets operational standards and is readily available to support statewide needs as required. Responses to this solicitation are due by August 11, 2026, at 4:00 PM, with the opportunity posted on July 20, 2026. The contract is structured as a subcontract and does not include a set-aside designation, meaning all eligible vendors may compete. The place of performance will be throughout Texas, with equipment required to be deployed as needed for vegetation control projects. Vendors interested in participating can access additional details through the provided Texas SmartBuy portal link.

Texas Department of Transportation

POSTED

DEADLINE

MPA 639 Tent Rentals and Associated EquipmentThe State of Rhode Island is soliciting vendors to provide tent rentals and associated equipment for use by statewide agencies under contract MPA 639, identified by solicitation number OEV27006845. This procurement is open to qualified suppliers who can furnish durable, safe, and appropriately sized tents along with necessary ancillary items such as flooring, lighting, heating or cooling systems, and anchoring equipment to meet the operational needs of state entities across Rhode Island. The solicitation was posted on July 17, 2026, with responses due by January 20, 2028, providing a substantial window for prospective vendors to prepare and submit their proposals. All performance is expected to occur within the State of Rhode Island, and the contract is intended for use by state-level agencies under the SLED classification. Primary contact for inquiries and submissions is Jonathan Nadeau, who can be reached via email at jonathan.nadeau@purchasing.ri.gov or by phone at 401-574-8133. Vendors interested in accessing the full solicitation details must either download the document from the public bid board by clicking the “print/download solicitation” button or log into their WebProcure account. No specific NAICS code or set-aside designation is provided, indicating this opportunity is open to all eligible vendors without preferential classification. Participation requires adherence to all terms outlined in the official solicitation document, including delivery timelines, quality standards, and compliance with state procurement policies.

State of Rhode Island

POSTED

DEADLINE

IFB 2026277777299Belmont Public Schools is seeking bids for the rental of musical instruments covering the 2026-2027, 2027-2028, and 2028-2029 school years under solicitation number BD-26-1245-BPS54-BPS54-131467. The invitation for bids was posted on July 17, 2026, with a firm response deadline of July 31, 2026, at 3:00 PM. All proposals must be submitted in compliance with the requirements outlined in the solicitation, and performance of the contract will take place at Belmont Public Schools, located at Pleasant Street, Belmont, Massachusetts, 02478. The primary point of contact for inquiries is Cameron Locke, Purchaser, representing the agency under the Massachusetts public school system. Bidders are expected to provide complete details on instrument availability, rental pricing, maintenance protocols, delivery schedules, and service terms to support the district’s music education programs across the three-year contract period.

BPS5430 - Belmont Public Schools

POSTED

DEADLINE

Construction Equipment Rental (Milling Machines)The contract involves the provision and operation of rumble strip milling machines and associated support equipment for pavement profiling activities in Big Bear Lake, California, under the jurisdiction of Caltrans District 8, which covers San Bernardino and Riverside counties. The work centers on the rental and deployment of specialized road milling machinery required to create longitudinal rumble strips on existing pavement surfaces to enhance vehicle safety by providing auditory and tactile alerts to drivers. Equipment will be operated by qualified personnel to ensure precise milling depths, alignments, and compliance with transportation safety standards. The NAICS code 532310 indicates this is a contract for construction equipment rental, specifying the nature of the service as equipment leasing with operational support rather than direct construction labor. The contract is classified as a subcontract and was posted on July 16, 2026, with performance taking place in the Big Bear Lake area. The scope requires not only the delivery and setup of milling machines but also ongoing maintenance, technical support, and adherence to local and state transportation regulations during operations. All activities must be conducted without disrupting traffic flow or compromising public safety, and equipment must meet specified performance criteria for vibration control, noise reduction, and pavement surface consistency. While the solicitation number and point of contact are not provided, the contract is accessible through the Caltrans CEQA Net project portal for further details.

Caltrans, District 8 - San Bernardino/Riverside

POSTED

DEADLINE

Temporary Fabric Aircraft Hanger LeaseThe U.S. Air Force at Mountain Home Air Force Base in Idaho is seeking market information for a short-term, turnkey temporary aircraft hangar solution to support operational needs beginning in September 2027. The requirement calls for the lease, installation, and removal of two temporary hangar systems: one large enough to house two F-15 aircraft and an additional 50 ft by 50 ft structure, to be in place for a two-month duration. Full lifecycle support is required, including delivery, on-site assembly, and complete disassembly and removal at the conclusion of the lease term, with all work to be performed at the specified location in Mountain Home, Idaho. The response is being sought under a sources-sought notice, not a formal solicitation, and vendors are asked to confirm their capability to meet the technical and schedule requirements, including providing a rough order of magnitude cost estimate broken down into mobilization, monthly rental for the two-month period, and demobilization. The solicitation number is FA489726QA5214, with a response deadline of July 31, 2026, and the North American Industry Classification System code is 532310 for temporary rental of machinery and equipment. Point of contact information is provided for inquiries, and while the contract is not subject to set-aside programs, no detailed pricing, evaluation criteria, delivery terms, inspection standards, or clauses have been included in the available documentation.

FA4897 366 Cons Pkp

POSTED

DEADLINE

Rental, Lease or Purchase of Office TrailersThe Government of Saskatchewan, through the Ministry of Highways, has issued a continuous solicitation for the rental, lease, or purchase of office trailers under solicitation number SK-9078-Continuous, which remains open until May 31, 2030. The initiative seeks qualified suppliers who can provide office trailers with specified features such as skid frames, central air-cooling systems, propane or LPG heating, windows, two exterior doors, interior lighting, and two distinct office spaces, though additional configurations may be considered based on operational needs. Participation in this process involves an initial qualification phase, after which prequalified suppliers will be invited to submit bids during a subsequent procurement stage. This is a repost of the previously issued RFSQ 9078, and suppliers already prequalified under that earlier posting are not required to reapply. The contract is administered by SaskBuilds and Procurement, with all inquiries directed to the primary point of contact, Eoin Keating, via the email rfxquestions@gov.sk.ca. The procurement is specific to service delivery within Saskatchewan and operates under a continuous onboarding model to ensure ongoing availability of suitable trailer units.

SaskBuilds and Procurement

POSTED

DEADLINE

in almost 4 years

Equipment Rental and Field Support ServicesThis contract focuses on providing heavy forestry equipment, including feller-bunchers, masticators, and skid steers, either on a rental basis or with operators included, specifically for operations in remote and rugged terrain. The services aim to support forestry activities that require specialized machinery capable of handling challenging environmental conditions. The contract is categorized under NAICS code 532310, which pertains to equipment rental and leasing services. Issued by the National Interagency Fire Center under the Department of the Interior, this subcontract facilitates field support in remote locations, ensuring that necessary heavy equipment is available to carry out forestry operations effectively. Although specific location and contact details are not provided, the emphasis is on delivering reliable equipment solutions tailored to the difficult demands of forestry work in isolated areas.

National Interagency Fire Center

POSTED

DEADLINE

Vehicle Recompete: Bpa 140F0422A0036This contract is a five-year Blanket Purchase Agreement (BPA) for heavy equipment under the Fish and Wildlife Service, with an ordering period ending on July 31, 2027. It has a ceiling value of $10 million and is managed by the FWS Southeast Regional Office, operating under the Department of the Interior. While currently there are no active task orders valued at zero, past notable task orders include rentals of fire bill equipment and dump trucks, with values of $17,421.83 and $11,050 respectively, both provided by Herc Rentals. The BPA was issued as a full recompete under the NAICS code 532310, which applies to rental and leasing services. The contract was initially forecasted with a posted date in early 2026, and its structure includes pre-negotiated terms for vehicle and heavy equipment rental to support various regional needs within the Fish and Wildlife Service. The agreement aims to streamline procurement, allowing agencies within the Department of the Interior to efficiently access heavy equipment rentals as required throughout the BPA duration. Despite limited active orders at present, the contract offers a substantial spending capacity and flexibility for future task orders within its scope.

Fws Southeast Regional Office

POSTED

DEADLINE

Project Management and Coordination Services

City of Ontario

POSTED

DEADLINE

Construction Equipment Rental

Caltrans, District 9 - Bishop

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Bliss

Same awarding agency

Roof Repair B9502 McGregor RangeThe U.S. Army’s Mission and Installation Contracting Command at McGregor Range, New Mexico, is seeking bids for the replacement of an asphalt roof on building B9502 under a firm-fixed-price contract. The project requires full provision of labor, materials, equipment, tools, and supervision, with a contract duration of 120 days following notice to proceed. This procurement is entirely set aside for small businesses, classified under NAICS code 238160 with a size standard of $19 million, and the estimated value falls between $100,000 and $250,000. Contractors must comply with the FAR clause 52.219-14(e)(3), which limits subcontracting to no more than 85 percent of the contract value, excluding materials, and ensures that any work performed by similarly situated entities counts toward this cap. The solicitation is tentatively scheduled for release on August 12, 2026, with a site visit planned for August 17, 2026, and all inquiries must be submitted by August 25 via email to the designated point of contact. Bids are due on or around September 1, 2026, and all offerors must be actively registered in SAM.gov, as required by federal guidelines. Full details including plans and specifications will be accessible exclusively through the Contract Opportunities page on SAM.gov, and it is the responsibility of potential bidders to monitor the site for amendments, as no paper copies will be distributed and the government is not liable for inaccessible websites or failed downloads.

Roofing Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

5th Armored Brigade (5th AR BDE) Turf Replacement Fort Bliss, Texas.The 5th Armored Brigade at Fort Bliss, Texas, is seeking a firm-fixed-price contract to replace its severely degraded artificial turf at Dagger Field, eliminating active safety hazards and establishing a modernized, high-quality training environment aligned with Army readiness standards. The project involves complete removal of the existing turf and installation of a permanent, resilient artificial surface measuring 84 feet by 102 feet, with a precisely configured layout: a 22-foot western gap, a 50-foot central lane section divided into five 10-foot-wide numbered lanes (1 through 5), and a 12-foot eastern gap. Six parallel white lines, each 82.5 feet long, will be marked across the width of the field, and the five lane numbers—each 3 feet 6 inches tall and 1.5 feet wide—must be horizontally centered within their lanes and placed exactly 3 feet from the starting line. The 5th Armored Brigade logo, measuring 15 feet in length and 7.5 feet in width, must be centered within the central lane section, with its “A” shape rendered in deep Jet Black structural lines, Crimson Red in the lower half, white in the upper half, and Hunter Green borders. The work is scheduled for performance between September 14, 2026, and January 31, 2027, with delivery and inspection occurring at the destination on Fort Bliss under FOB Destination terms, and compliance with the Performance Work Statement (PWS) is mandatory for 100% acceptance. The solicitation, numbered W911SG26QA049, is a Small Business Set Aside under NAICS code 238990, with proposals due by August 21, 2026, and must be submitted electronically via email to the contracting specialist and contracting officer. Offerors must be registered in SAM with a valid UEI and CAGE code, and must certify their small business status and any applicable socioeconomic designations. Evaluation is based on a trade-off process, where technical capability and past performance are assessed on a pass/fail basis as thresholds, and price is evaluated for reasonableness and completeness without numerical scoring. Contractor personnel must complete AT Level I training within 30 days of award, adhere to strict information security protocols including NIST SP 800-171 compliance, and use only approved government communication channels, with严禁 any disclosure of contract

All Other Specialty Trade Contractors

POSTED

about 23 hours ago

DEADLINE

B2472 Kitchenette Installation, Ft Bliss, TXThis contract is for the installation of a kitchenette in Building 2472 at Fort Bliss, Texas, under a Firm-Fixed-Price arrangement with an estimated value between $250,000 and $500,000. The solicitation is exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 236220 with a size standard of $45 million, and all bids must include an original bid guarantee as required by FAR 52.228-1. Performance and payment bonds are mandatory, and photocopies of bid bonds are not accepted. The work involves comprehensive construction including metal stud walls, ceiling tile replacement, cabinetry, countertops, tile backsplashes, plumbing, electrical systems with new panels and wiring, and range hood installations, all in accordance with UFGS, NSF/ANSI 51, UL 2818, and ASTM standards. A prime contractor’s superintendent must be present at all times during performance, cannot be subcontracted, and is considered a key position. The performance period is strictly defined from September 15, 2026, to March 15, 2027, with work required to commence within 30 days of notice to proceed and complete within 180 calendar days. All deliveries and work must occur at Fort Bliss, Texas, with inspections and final acceptance taking place at Building 2527, Chaffee Road. The contractor must comply with extensive special requirements including adherence to Buy American Act provisions, certification that materials contain no asbestos, lead, or other toxic substances, submission of Safety Data Sheets, and a toxic substance-free certification. Security protocols require antiterrorism awareness training, compliance with DFARS 252.204-7012 for safeguarding covered defense information using NIST SP 800-171, controlled vehicle and personnel access on base, and an Army Radiation Permit for any radioactive equipment. A detailed Activity Hazard Analysis must be submitted for all high-risk tasks. As-built drawings in both Mylar and digital DWG formats, including survey data and record of material changes, are required along with a comprehensive close-out package including O&M manuals, warranty letters, waste manifests, key control registers, and DD Form 1354 if applicable. The contracting officer is the sole authority for final acceptance, and the contractor retains full responsibility for quality control, even

Commercial and Institutional Building Construction

POSTED

about 23 hours ago

DEADLINE

Security and Anti-Terrorism Training ComplianceThe contract requires the delivery of Department of Defense–approved Anti-Terrorism Level I training to all assigned personnel, with a strict mandate to maintain accurate and up-to-date compliance records for submission to the Contracting Officer’s Representative. Training must be completed in accordance with DoD standards and documented thoroughly to ensure full adherence to federal security requirements. The effort is scoped under a Small Business Set-Aside, designated as a Total Small Business Set-Aside under FAR 19.5, and is classified under NAICS code 611430, indicating it relates to other schools and instruction services. Performance is localized at Fort Bliss, Texas, with a zip code of 79916, and the responsible agency is the Department of Defense through W6QM Micc-Ft Bliss. The opportunity was posted on July 27, 2026, with responses due by August 21, 2026, and is structured as a subcontract under a broader federal acquisition framework.

Professional and Management Development Training

POSTED

DEADLINE

Labor Compliance and Wage Determination ManagementThis contract requires full compliance with Service Contract Labor Standards and applicable wage determinations, mandating accurate certified payroll reporting and strict adherence to federal labor laws. The work is to be performed at Fort Bliss with a zip code of 79916, under a subcontract classified as a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid. The North American Industry Classification System code 541211 indicates the scope relates to accounting, tax preparation, bookkeeping, or payroll services. The solicitation was posted on July 27, 2026, with responses due by August 21, 2026, and is managed by the Department of Defense through the W6QM Micc-Ft Bliss office. All awarded contractors must maintain rigorous documentation and reporting practices to verify labor compliance throughout the performance period.

Offices of Certified Public Accountants

POSTED

DEADLINE

Artificial Turf InstallationThe contract specifies the full installation of artificial turf at Fort Bliss, Texas, with a requirement to prepare a compliant sub-base, apply appropriate infill materials, seamlessly join sections of turf, and accurately place custom logos as outlined in technical specifications. All work must adhere strictly to established standards to ensure durability, safety, and performance. This is a subcontract awarded under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and it falls under NAICS code 238910 for specialty trade contractors. The opportunity was posted on July 27, 2026, and all proposals must be submitted by August 21, 2026, at 4:00 PM. The contracting activity is managed by the Department of Defense through the W6QM Micc-Ft Bliss office, and the project location is clearly designated as Fort Bliss with a ZIP code of 79916.

Site Preparation Contractors

POSTED

DEADLINE

Site Preparation and DemolitionThe contract pertains to the removal and disposal of existing artificial turf at Dagger Field located at Fort Bliss, Texas, with a focus on complete site cleanup and debris hauling in accordance with all applicable safety standards. This work falls under the broader category of site preparation and demolition and is classified under NAICS code 238990 for other construction support activities. The effort is structured as a subcontract and is designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses are eligible to bid, ensuring opportunity for qualified small enterprises to participate in Department of Defense projects. The solicitation was posted on July 27, 2026, with a response deadline of August 21, 2026, at 4:00 PM Eastern Time. The work is being conducted under the authority of the Department of Defense through the W6QM Micc-Ft Bliss office, and all activities must comply with federal, state, and local regulations regarding hazardous material handling, environmental protection, and worker safety during demolition operations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Artificial Turf Supply and DeliveryThe contract entails the supply and delivery of new artificial turf and associated logo components to Dagger Field at Fort Bliss, with all materials required to meet rigorous military durability and safety standards. The work is scoped as a subcontract under a Total Small Business Set-Aside, ensuring eligibility exclusively for small businesses as defined by the SBA pursuant to FAR 19.5, and falls under NAICS code 326291 for other rubber product manufacturing. Performance is mandated at Fort Bliss, with a zip code of 79916, and the contracting activity is managed by the Department of Defense through W6QM Micc-Ft Bliss. The opportunity was posted on July 27, 2026, with a firm deadline for responses set for August 21, 2026, at 4:00 PM, providing potential vendors a four-week window to prepare and submit proposals. All delivered products must align with federal specifications for high-traffic, high-impact military applications, ensuring long-term performance under extreme environmental and operational conditions.

Rubber Product Manufacturing for Mechanical Use

POSTED

DEADLINE

Project Safety & Health Officer (SSHO) ServicesA Service-Disabled Veteran-Owned Small Business is being sought to provide on-site Safety and Health Officer services at Fort Bliss, Texas, to support Department of Defense operations under the EM 385-1-1 safety standards. The contractor will be responsible for implementing the Accident Prevention Plan, conducting Activity Hazard Analyses, and ensuring full compliance with all applicable military and DoD safety regulations on-site. This subcontract requires direct, hands-on safety oversight throughout project execution to prevent workplace incidents and maintain regulatory adherence. The opportunity is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and is classified under NAICS code 541620, indicating it falls within the environmental and other scientific consulting services category. Proposals must be submitted by August 17, 2026, and performance will be localized at Fort Bliss with all safety activities conducted in person at the installation. The contractor must possess the expertise to manage on-site safety protocols aligned with federal defense standards and demonstrate proven experience in military construction or operational environments.

Environmental Consulting Services

POSTED

DEADLINE

Environmental Compliance & Waste ManagementThe contract titled Environmental Compliance & Waste Management is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, focusing on the safe handling, removal, and disposal of old equipment and construction debris. All work must adhere to strict environmental standards, including certification that materials are asbestos-free and full compliance with EPA and PPA regulations to ensure environmental safety and regulatory alignment. Performance is required at Fort Bliss, Texas, with a zip code of 79916, and the solicitation was posted on July 27, 2026, with responses due by August 17, 2026. The NAICS code 562910 designates this as waste collection, treatment, and disposal services, underscoring the specialized nature of the environmental remediation work expected. The contracting agency is the Department of Defense through W6QM Micc-Ft Bliss, indicating this effort supports military infrastructure and environmental stewardship needs at the installation.

Remediation Services

POSTED

DEADLINE

Quality Control & Documentation ManagementThe contract under the title Quality Control & Documentation Management is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, identified by the NAICS code 541330, which pertains to engineering services. It requires the development and full execution of a comprehensive Quality Control Plan encompassing inspections, testing documentation, deficiency tracking, and all necessary close-out deliverables to ensure compliance and project integrity. The work is to be performed at Fort Bliss, Texas, with a zip code of 79916, and is issued by the Department of Defense through the W6QM Micc-Ft Bliss office. Proposals must be submitted by August 17, 2026, at 6:00 PM, following a solicitation posted on July 27, 2026. There is no specified point of contact or additional organizational details provided, and the contract remains open for qualified SDVOSB entities to respond through the SAM.gov platform.

Engineering Services

POSTED

DEADLINE

Electrical Systems Integration & Power UpgradesThe contract involves electrical system modifications to support the installation of new kitchen equipment at Fort Bliss, Texas, requiring comprehensive upgrades to circuits, disconnects, and grounding systems to ensure safe and reliable power delivery. All work must comply with U.S. Department of Defense safety standards, emphasizing operational integrity and hazard prevention in a military facility environment. The scope is focused on integrating electrical infrastructure with modern kitchen appliances, demanding precision in load calculations, system redundancy, and adherence to federal electrical codes applicable to DoD installations. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under NAICS code 238210, reflecting a commitment to veteran-owned enterprise participation in defense infrastructure projects. The opportunity was posted on July 27, 2026, with a response deadline of August 17, 2026, and performance will be conducted at Fort Bliss, zip code 79916. While no specific point of contact is listed, the contracting authority is the Department of Defense through the W6QM Micc-Ft Bliss office, indicating the work supports military readiness through enhanced food service capabilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE