Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on April 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Protective Packaging and Kit Assembly

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 323111
New
SLED
Missouri Aeronautical Chart - Cartographic Design, Layout, and Printing
Solicitation # MODOT 0000000458SL
The Missouri Department of Transportation (MoDOT) is soliciting proposals for the cartographic design, layout, and printing of the Missouri Aeronautical Charts for the Missouri Highways and Transportation Commission (MHTC). This is a comprehensive service contract, not a print-only agreement, requiring the contractor to provide all necessary labor, facilities, equipment, and supplies. The primary deliverable is a chart that must conform to the FAA sectional chart scale of 1:500,000, printed on 60-pound synthetic paper with a minimum opacity of 91 percent and a maximum gloss of 25 percent. The contract period runs from January 1, 2027, through December 31, 2029, with two optional one-year renewals. Proposals must be submitted electronically by 2:00 PM Central Time on December 3, 2026. Award decisions will be based on the best overall proposal, evaluated through a point system focusing on cost (40 points), experience and reliability (30 points), method of performance (20 points), and the quality of printing samples (10 points). Strict packaging and palletization standards are required, including grouping charts in sets of 25 and utilizing specific wooden warehouse pallets with a maximum height of 48 inches and a weight limit of 1,600 pounds. Offerors must submit a firm fixed price and complete several mandatory exhibits, including vendor experience, cost analysis, and certifications regarding worker eligibility and the Anti-Discrimination Against Israel Act. Payment is provided only after services are rendered, and the desired delivery is within 180 calendar days of a purchase order.
MODOT TRANSPORTATION

POSTED

about 19 hours ago

DEADLINE

in 16 days

AI Contract Overview

Show more

This subcontract opportunity, titled Protective Packaging and Kit Assembly, is issued by the Department of Defense under the agency FA2263 Aflcmc Romk Afmetcal. The primary scope of work involves the assembly of complete exchange kits, which must include a load cell, digital indicator, adapter, travel case, and cable. Additionally, the contractor is required to provide protective storage boxes designed for safe shelf or cabinet storage. The project is categorized under NAICS code 323111 and will be performed in the 43056 zip code area. Interested parties must submit their responses by the deadline of April 30, 2026, at 6:00 PM. The solicitation was officially posted on April 16, 2026.

General Info

NAICS

323111 - Commercial Printing (except Screen and Books)

Place of Performance

OH, 43056, USA

Set-Aside

NONE

Documents

This scope was carved out of 26M-630ABCDEFG-FO.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AFPSL Load Cell Exchange

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Supply of Identification Markers (NSN 7690-01-675-6387)Open now, due in 13 days
  • MARKER, IDENTIFICATIONOpen now, due in 13 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2263 Aflcmc Romk Afmetcal
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Assemble complete exchange kits including load cell, digital indicator, adapter, travel case, and cable; provide protective storage boxes for safe shelf or cabinet storage.

More opportunities from Department Of Defense → FA2263 Aflcmc Romk Afmetcal

Same awarding agency

NAICS: 334515
New
Federal
Accessories for Keysight N5242A
Solicitation # 27E-646A-RF
The United States Air Force Air Force Metrology Calibration Program (AFMETCAL) is conducting market research via a Request for Information (RFI) to identify sources capable of providing modernized, fully compatible accessories and physical standards for legacy Keysight N5242A Vector Network Analyzers (VNAs). The objective is to procure plug-and-play replacement accessories that integrate seamlessly with the existing VNA platform without requiring software modifications or compromising metrological accuracy. These items will be delivered to various Precision Measurement Equipment Laboratories (PMELs) across the Air Force enterprise. The acquisition falls under NAICS code 334515, with an estimated quantity of one unit over a one-year period. Reconditioned, remanufactured, or used materials are strictly prohibited. Prospective contractors must demonstrate technical proficiency in supplying high-precision radio frequency (RF) and microwave calibration accessories. All delivered items must meet or exceed specified performance requirements and be verified using test equipment with first echelon certification traceable to the International System of Units via the National Institute of Standards and Technology (NIST) or other AFMETCAL approved sources. Interested parties, including both large and small businesses, must submit a comprehensive capability statement, rough order of magnitude pricing, and detailed company information by December 14, 2026. This notice is for planning purposes only and does not constitute a solicitation or a commitment of government funds.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

6 days ago

DEADLINE

in 27 days
View Details
NAICS: 334515
Federal
Metrology Grade Oscilloscope
Solicitation # 26E-187A-RF
The Air Force Metrology and Calibration (AFMETCAL) program office is conducting market research through a Sources Sought synopsis to identify potential providers for 131 highly accurate, standardized metrology-grade oscilloscopes over four years. The objective is to replace aging equipment and establish a consistent technical baseline across all Precision Measurement Equipment Laboratories (PMELs), which will streamline training, simplify Technical Order authoring, and ensure identical bench setups across the enterprise. This request is for planning purposes only and is not a solicitation for proposals. Technical requirements for the hardware include a bandwidth of 1.5 to 2 GHz, a sample rate of 5-10 GS/s, and a native resolution of at least 12-bit, with 16-bit in high-res mode. The preferred unit size is 15 by 8 by 6 inches with a minimum 10-inch high-resolution multi-touch display. Connectivity must include native GPIB, LXI Core compliant Ethernet, and USB 3.0. Each unit must be delivered with an ISO/IEC 17025 accredited Certificate of Calibration traceable to NIST or AFPSL. Support requirements include a minimum three-year warranty and guaranteed spare parts availability for at least seven years. Interested vendors, including both large and small businesses under NAICS code 334515, must submit a capability statement and rough order of magnitude pricing. Submissions should include company details, sales history, and technical specifications of the offered product. Responses are due by December 3, 2026, at 2:00 pm ET and should be directed to the listed contract specialists. Reconditioned or used materials are strictly prohibited.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

15 days ago

DEADLINE

in about 1 year
View Details
NAICS: 541611
Federal
Knowledge Transfer and Documentation for Future CompetitionThe contract requires the development of comprehensive technical documentation for the LBIR facility, covering its operations, calibration procedures, and system designs to ensure a smooth transition and enable future competition. The deliverables must be detailed enough to support knowledge transfer to new operators or contractors, ensuring continuity of function, maintenance, and technical integrity without reliance on current institutional knowledge. All documentation must be precise, standardized, and structured to facilitate understanding by technical personnel unfamiliar with the facility. This subcontract is tied to the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal and is focused on work performed in Gaithersburg. The North American Industry Classification System code 541611 indicates it is related to scientific and technical consulting services, specifically management and technical consulting. Although the solicitation number is not provided, the contract was posted on July 30, 2026, signaling preparatory activity ahead of anticipated future procurement cycles. The documentation produced under this effort will serve as a foundational asset for any subsequent vendor or team taking over facility operations, emphasizing clarity, completeness, and technical accuracy.
Administrative Management and General Management Consulting Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Optical and Radiometric Systems Engineering SupportThe contract seeks engineering support for the development and optimization of low-background infrared measurement systems used in radiometric calibration, with a focus on optical design, alignment precision, and performance enhancement. The work involves advanced technical expertise in infrared optics to ensure systems meet stringent calibration standards, minimizing background noise and maximizing measurement accuracy for critical defense and scientific applications. The contractor will be responsible for iterative design improvements, system-level testing, and collaboration with technical teams to achieve optimal radiometric outcomes. This subcontract is issued under the Department of Defense through the agency FA2263 Aflcmc Romk Afmetcal, with performance located in Gaithersburg. The work falls under the NAICS code 541715, indicating it is centered on research and development in physical, engineering, and life sciences. The contract was posted on July 30, 2026, and is intended to support specialized instrumentation needs where high-sensitivity infrared measurements are essential for calibration integrity. No set-aside provisions are specified, and the procurement remains open to qualified subcontractors capable of delivering high-precision optical engineering solutions.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS