Provide services for Overhang repairs of Annex building

The contract amendment 191N6526Q0067_SF-30_A0001 updates the original solicitation to provide revised scope of work and answers to questions for overhang repair services at the Annex Building within the Chancery compound in New Delhi. The project focuses on repairing approximately 20 percent of a 15,000-square-foot concrete overhang area, totaling 3,000 square feet of deteriorated surface, with a deliverable target of fully repaired, plastered, painted, and protected areas covering 2,250 square feet. All work must comply with Indian Standards IS 456 and IS 456.5, along with ASTM equivalents, and adhere strictly to USACE EM 385-1-1 safety regulations and local safety codes. Work is to be executed within a 60-day period during standard hours of 08:30 AM to 05:00 PM, with scaffolding requiring certified design and third-party inspection reports before use. The contractor must submit material data sheets for polymer-modified mortar, paint, and anti-carbonation coating, along with security clearance records for all personnel, a detailed personnel list with host government photo IDs, and completion and warranty certificates. A tap test using a five-kilogram hammer is mandated to assess and remove loose plaster prior to repair. Final acceptance is contingent upon delivering all documentation and physical repairs, and a one-year written warranty from the date of final handover to the U.S. Government is required, with any spalling or defects during that period to be repaired at the contractor’s expense. Offers must acknowledge receipt of this amendment through one of three specified methods—returning a signed SF-30, acknowledging receipt on each offer submission, or submitting a separate written confirmation—with failure to do so resulting in offer rejection. The solicitation was posted on June 29, 2026, with responses due by July 2, 2026, and is classified under NAICS code 237990. The contracting office is the U.S. Embassy in New Delhi, Department of State, with primary point of contact Ashok Chellaramani and secondary contact Chaitanya Sharma. Contractors are advised to include product cut sheets with their proposals for evaluation purposes.