Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PUMP, FUEL, METERING

Active
SPE7L1-26-T-917FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 20 units of a fuel metering pump, identified by NSN 2910-01-642-2712 and part number 36002064 from Volvo Penta of the Americas Inc, under solicitation SPE7L1-26-T-917F. This is a total small business set-aside with a NAICS code of 336310, and all supplies must comply with DLA packaging requirements and technical standards referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a commercial off-the-shelf product with adequate catalog data available for evaluation, and government identification must be removed from non-accepted supplies. Delivery is required within 20 days of award, shipped FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with specific preservation and wrapping methods, and marking must follow MIL-STD-129 without special codes. Palletization adheres to DLA packaging guidelines, and shipping must be conducted via the fastest traceable method—parcel post is prohibited. The delivery address is the U.S. Coast Guard Surface Forces Logistics Center in Baltimore, Maryland, and the required delivery date is August 3, 2026. The contract includes detailed logistical and administrative codes for government use and is managed by the Department of Defense’s Land Supply Chain under point of contact Kristina Derry.

General Info

Procure 20 fuel metering pumps, NSN 2910-01-642-2712, by August 3, 2026, FOB origin, per DLA and MIL-STD standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2401 HAWKINS POINT ROAD, BALTIMORE, MD, 21226-5000, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L1-26-T-917F Request for Quotations DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PUMP,FUEL,METERING
PUMP,FUEL,METERING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
COMMERCIAL OFF THE SHELF ITEM. ADEQUATE CATALOG
DATA IS AVAILABLE AT THE PROCUREMENT AGENCY TO
EVALUATE ALTERNATE OFFERS.
VOLVO PENTA OF THE AMERICAS INC 61724 P/N 36002064
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744593 0001 EA 20.000
NSN/MATERIAL:2910016422712
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:GA CUSH/DUNN THKNESS:D
UNIT CONT:10 OPI:O
SPE7L1-26-T-917F
SECTION B
PR: 7017744593 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
Z52000
COMMANDER, U.S. COAST GUARD
SURFACE FORCES LOGISTICS CENTER
2401 HAWKINS POINT ROAD
BALTIMORE MD 21226-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
Z52000
COMMANDER, U.S. COAST GUARD
SURFACE FORCES LOGISTICS CENTER
2401 HAWKINS POINT ROAD BLDG 88A
BALTIMORE MD 21226-5000
US
M/F: (TCN) Z5200062090139
RDD:
PROJ: TP 2
SUPP ADD: Z31800 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: 26 FC: SN
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7L1-26-T-917F NSN/Part Number: 2910-01-642-2712 Quantity: 20 EA Purchase Request: 7017744593QTY: 20 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
This contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1000 and part number 2403/0252, supplied by JCB INC, under solicitation SPE7L1-26-T-917D. The item must be delivered in strict compliance with MIL-DTL-117, Type II, Class C, Style 1 packaging standards, requiring medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling with code 20–20 “Do not bend,” and palletization as outlined in DLA packaging requirements. The delivery is FOB origin with zero variance tolerance, inspection and acceptance occurring at the destination, and shipment must be traceable—parcel post is prohibited. The required delivery date is August 3, 2026, with a 20-day lead time, and the item must be sent to the defense logistics agency warehouse in Johnston, Iowa, under government control codes and shipping instructions. The contract integrates referenced technical and quality standards from the DLA Master List, and includes compliance requirements for hazardous materials packaging under IP025, along with data handling protocols for covered defense information. The unit of issue is each (EA), priced at $1.00, with a total contract value of $1.00. Special handling instructions include preservation method 33, dry climate control, and specific container types with no cushioning material. The point of contact is Kristie Fown, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. This procurement is categorized under NAICS 336310, managed by the Department of Defense’s Land Supply Chain, and is subject to federal acquisition regulations and DLA-specific administrative protocols, including government-only metadata fields and traceability markers.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
LINKAGE KIT, VALVE
Solicitation # SPE7MC-26-T-168P
The contract is for the procurement of a Linkage Kit, Valve, identified by NSN 4820-21-913-2483 and part numbers 861017-92 and LK637, under solicitation SPE7MC-26-T-168P, with a total quantity of 16 kits. It is a total small business set-aside under NAICS code 336310, and all items are designated as critical application items for aircraft appliances and equipment. The contract strictly prohibits the use of class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Mercury-containing portable lamps and instruments must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. All items must be preserved and packaged in accordance with MIL-STD-2073-1E, Appendix D, for kits, and marked per MIL-STD-129 with no special marking required. Packaging must comply with DLA’s procurement requirements and palletization standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The required delivery date is 128 days from award, with a ship date of March 5, 2024, and the final delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The unit of issue is KT, and the procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with David Shivers as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
IMPELLER, WATER PUMP
Solicitation # SPE7L5-26-T-4759
The contract pertains to the procurement of seven impellers for water pumps, identified by NSN 2930-41-000-6579 and part number 2203714/9, supplied by McIntyre Equipment Pty. Limited and Steyr Motors North America, Inc. The requirement is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards, including ASTM D3951, and mandates compliance with MIL-STD-129 for marking and labeling. Packaging must adhere to RP001 DLA Packaging Requirements for Procurement, with all units packed in accordance with ASTM D3951 and palletized as specified. The delivery is set for 53 days after contract award, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, California. The unit of issue is each, with a total price of $49.00 at $7.00 per unit. The solicitation number is SPE7L5-26-T-4759, with a response deadline of August 17, 2026, and the required ship date is October 10, 2026. All shipments must comply with DLA Procurement Notes C19 and C20 for transportation and freight handling.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE7L1-26-T-917B
The contract is for the procurement of two fuel system valves, identified by NSN 2910016681633 and part number 8M0121389, supplied by Brunswick Corp under solicitation SPE7L1-26-T-917B. Delivery is required within 20 days to the NAVSCOLEOD facility in Niceville, Florida, with shipment to be made by the fastest traceable means, excluding parcel post. The items are to be delivered FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization governed by DLA packaging standards. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The unit price and total cost are not specified in the provided text, and the original required delivery date is August 3, 2026. The contract is managed under DoD unit of issue protocols, and all government-specific codes, including IPD, DIC, and FREIGHT SHIPPING ADDRESS, are for official use only. Point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
FILTER, FLUID
Solicitation # SPE7L1-26-T-916Y
The contract pertains to the procurement of three fluid filters, part number FF5289, manufactured by Fleetguard Inc. a division of Cummins, with the NSN 2910-01-546-4764. The items must be delivered within 20 days to the designated receiving location at Yuma Proving Ground, Arizona, under FOB Origin terms with no tolerance for quantity variance. All packaging must comply strictly with ASTM D3951 while adhering to the more stringent and overriding requirements outlined in the DLA Master List of Technical and Quality Requirements, including marking and labeling per MIL-STD-129. Palletization must follow DLA’s packaging provisions, and the items must be shipped via traceable means, excluding parcel post. The delivery must be made to the specified military receiving point with full compliance to government shipping and marking instructions, including the use of the provided military freight address and marking for W8000S. The required delivery date is August 3, 2026, and the contract is governed under solicitation SPE7L1-26-T-916Y, which is classified under NAICS code 336310 and managed by the Department of Defense’s Land Supply Chain. Each unit has a fixed price of $3.00, totaling $9.00 for the order.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
COVER ASSEMBLY
Solicitation # SPE4A5-26-T-328G
The contract pertains to the procurement of a COVER ASSEMBLY with part number 3171222-1 and NSN 4820-01-154-5527, for a quantity of 13 units, under solicitation SPE4A5-26-T-328G. Delivery is required FOB origin with a lead time of 171 days, and the item must be delivered by January 31, 2027, with the original required delivery date set for March 24, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA’s packaging requirements RP001, with palletization also governed by those standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications and includes referenced requirements such as RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RT001 for measuring and test equipment. Unit Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All documentation and compliance obligations are governed by the applicable revision of the DLA Master List on the solicitation issue date. The delivery destination is Tinker AFB, Oklahoma, and transportation instructions must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE, LINE PIERCING
Solicitation # SPE7MC-26-T-115P
The contract requires the procurement of 75 units of a Commercial Off the Shelf line piercing valve equipped with a depressor valve and needle valve shut-off, a dust cover, and a neoprene seal, designed to fit 3/16, 1/4, and 5/16 inch O.D. tubing. The item is identified by NSN 4820-00-499-2211 and must be delivered as an end item tool kit. Strict prohibitions ban the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements without relieving compliance with product performance standards. All substitutions or alternative materials require prior approval. The valve must be packaged in compliance with ASTM D3951 and further meet DLA RP001 packaging requirements for procurement, including palletization standards. Packaging and labeling must adhere to MIL-STD-129 for shipment and storage, incorporating bar-coding as mandated. Inspection and acceptance occur at the destination, with the government conducting final evaluation under FAR 52.246-2. Delivery is FOB origin with a 161-day performance period, targeting a shipment date of December 25, 2026, to the designated DLA Distribution facility in New Cumberland, PA. The contract is fixed-price with zero variance allowed on quantity, and payment must be processed electronically via Wide Area WorkFlow using an invoice and receiving report. The contracting officer has not yet defined the specific contract type, and all contractor representations, certifications, and socioeconomic status disclosures are left to offerors during proposal submission. Compliance with safeguarding defense information controls, trafficking in persons policies, employment eligibility verification, and hazardous material reporting is mandatory, and the supplier must be capable of providing the item as a true COTS product without unauthorized modifications. The award will be based on a solicitation issued July 5, 2026, with proposals due by July 16, 2026, submitted exclusively through the DLA Internet Bid Board System.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
RETAINER, PLANETARY
Solicitation # SPE4A5-26-T-327B
The contract pertains to the procurement of six planetary retainers, identified by NSN 2910-01-641-3642, under solicitation SPE4A5-26-T-327B issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense. The requirement is for delivery within 171 days of award, with response submissions due by August 12, 2026. Technical and quality mandates are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and physical identification of bare items is required, though Item Unique Identification is waived per the Service customer’s request, invoking DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must be adequate to ensure compliance. Covered defense information is subject to applicable protections, and performance is designated for Cherry Point, North Carolina, with Steven Lewis as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-911W
This contract solicits 10 O-rings identified by NSN 5331-01-661-6032 under solicitation number SPE7L1-26-T-911W, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after award. The items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. Source approval documentation is required as per RC001, and covered defense information guidelines may apply. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be approved unless explicitly authorized. Asbestos is banned from all supplied items, and any alternative materials must be validated per Clause L30 and Provision 4 conditions. The contracting activity is under the Department of Defense, Land Supply Chain, with performance set in Norfolk, Virginia, and primary point of contact is Kristina Derry via email and phone.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-915H
The contract pertains to the procurement of 149 units of an O-RING with NSN 5331-01-599-7035 under solicitation number SPE7L1-26-T-915H, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. The delivery timeline is 140 days after contract award, with performance occurring at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the NAICS code is 336310. Primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE AND SLEEVE SET A
Solicitation # SPE4A5-26-T-322P
The contract is for a matched valve and sleeve set assembly, metering type, identified by part number 3601509-1 and NSN 4820011138349, supplied by Honeywell International Inc. A total of 43 units are required at a unit price of $43.00, with delivery set for 171 days after award. The item is classified as a critical application item and must conform to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any other standards. The supplier must comply with DLA packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for general packaging, and RP001 for palletization, with all packaging and labeling adhering strictly to government specifications. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The supplier is required to perform a Cybersecurity Maturity Model Certification Level 2 self-assessment, and measuring and test equipment must be appropriately calibrated and documented. Delivery is FOB origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. The shipment must be ready by January 31, 2027, with the original delivery deadline set for April 30, 2027. All packaging, marking, and transportation must align with DLA Procurement Notes C19 and C20, and the unit of issue is strictly EA as defined in the DLA authorization. The contract is governed under solicitation SPE4A5-26-T-322P, with no variance allowed in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of a gasket item identified by NSN 5330-01-557-0920 and part number X-113BT, with a requirement of 600 feet delivered in continuous lengths. The unit of issue is the foot, with the order unit being a roll of 500 feet, and delivery must occur within five days of award. Delivery is FOB origin, and the quantity allowable variance is plus 10 percent with zero tolerance for reduction. Inspection and acceptance are both conducted at the destination. Packaging must comply with MIL-STD-2073-1E, using black plastic for preservation, with no cushioning or dunnage, and markings must follow MIL-STD-129 with no special handling codes. The item is not classified as hazardous, but shipment must be sent by the fastest traceable method, explicitly prohibiting parcel post. The destination for delivery is the Distribution Management Office at MCLB Albany, Georgia. The gasket is sourced from approved vendors including Trim-Lok Inc, Charleston Rubber & Gasket Co Inc, and General Dynamics Land Systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The contract is issued under solicitation SPE7L1-26-T-916W, with a response deadline of August 17, 2026, and an original required delivery date of August 6, 2026. The NAICS code is 339991, and the contracting activity falls under the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-26-T-917U
This contract is for the procurement of one bracket, angle with NSN 5340-01-537-5042 and part number 3471822 from Oshkosh Defense LLC, under solicitation SPE7L1-26-T-917U. The item is a critical application component required for delivery within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Delivery must be made to NMCB 4 at Port Hueneme, California, with shipping required via traceable means only—parcel post is prohibited. All packaging must comply with DLA’s master requirements, including MIL-STD-129 for labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under Fed-Std-313, with DLA’s technical and quality requirements taking precedence over any commercial standards. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved. The contract enforces strict compliance with DLA packaging and procurement protocols, including specific unit of issue and quantity per unit pack details, and requires palletization in accordance with RP001. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with the delivery destination and shipping instructions clearly defined. The required delivery date is July 15, 2026, and all documentation must reflect the approved solicitation revision in effect at the award date. The item must be marked and tracked using the provided traceable control number and project identifier, and government-specific coding such as IPD 13 and DIC A4A must be applied. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332510 for metal fabrication.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-Q-1455
This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-917S
The contract is for the procurement of 200 units of a PLUNGER, DETENT with NSN 5340-00-782-1762 under solicitation SPE7L1-26-T-917S, issued by the Department of Defense through the Land Supply Chain office. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special coding. The item must conform to Technical Data Package Rev A, referenced to drawing number 19207-10949808 Revision B dated January 1, 1999, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract prohibits the use of Class I ozone-depleting chemicals in any form and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Inspection and acceptance criteria follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are set at VII, IV, and II respectively. A Certificate of Conformance is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. The end recipient is the Government of Israel Ministry of Defense, with delivery coordinated through the freight forwarder InterGlobal FWRD SV Inc Co G&B PKG Co in Jersey City, NJ, and the primary point of contact is Forsan Saad. The required delivery date is June 1, 2026, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. Configuration control and potential deviations require an Engineering Change Proposal or formal variance request, and covered defense information protocols apply.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-917T
The item specified is a mounting bracket identified by NSN/Part Number 5340-01-628-3279, with a quantity of eight units required under purchase request 7016687716. The delivery is due within 77 days after award, and the solicitation is issued under contract number SPE7L1-26-T-917T, with a response deadline of August 17, 2026. The procurement is governed by Defense Logistics Agency requirements, including technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, restricting any transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization are permitted to handle the technical data. The place of performance is in New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s Land Supply Chain, and inquiries should be directed to Isabelle Szulewska at the provided contact information.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916U
The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Spring Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916L
This contract specifies the procurement of two helical compression springs with part number 41001657 and NSN 5360-00-566-6315, furnished under solicitation SPE7L1-26-T-916L. The springs must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging levels, and marking guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the springs, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The items are to be delivered FOB origin within 20 days, with no tolerance for quantity variance. Delivery is to the Taiwan Army Zuo-Ying Ammunition Sub-Depot in Kaohsiung City, with no special marking required beyond standard military specifications. The contract mandates that all supplies be shipped without Government identification if rejected, and applies Covered Defense Information requirements as applicable. The unit of issue is each, with a total price of $2.00 for two units, and the freight forwarding and transportation procedures follow DLAD Proc Notes C19 and C20. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. The original required delivery date is August 7, 2026, and the contract is governed by the DoD’s authorized procurement framework, incorporating all relevant DLA packaging, inspection, and acceptance protocols applicable at origin. The NAICS code is 332510, and the solicitation is open to federal contractors under a standard commercial item acquisition process.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details