Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from General Services Administration was posted on March 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance and Conformance Testing

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Bid No. 2026-17 PROVIDING TO THE DORCHESTER COUNTY DEPT. PUBLIC WORKS ELLIOTT ISLAND ROAD GEOTECHNICAL SERVICES
Solicitation # 2026-17
Bid No. 2026-17 is a solicitation by the Dorchester County Department of Public Works for geotechnical services along a three-mile stretch of Elliott Island Road, extending from Savanna Lake to the Pokata Creek Bridge. The primary objective is to conduct subsurface soil exploration and laboratory testing to develop structural improvement options and pavement remediation recommendations. The scope of work includes approximately sixteen 16-foot Standard Penetration Test soil borings spaced every 1,000 feet, followed by a comprehensive laboratory testing program including consolidation, Atterberg Limits, Sieve Analyses, organic contents, and #200 washes. All sampling must adhere to ASTM D 1586, traffic control must follow MDOT SHA standards, and all operations must comply with OSHA safety requirements. The contract is a lump sum award based on the recommendation of the Public Works Director for the most responsive bidder, considering factors such as price, quality of work, experience, and delivery time. Bidders must submit sealed bids by November 24, 2026, including a Standard Bidding Form, an Affidavit of Qualification to Bid, a W9, and a Certificate of Insurance. The selected contractor is expected to mobilize within four weeks of proposal acceptance and must deliver a final geotechnical report, including engineering analyses and construction cost estimates, within 30 days of completing fieldwork. Payment terms are set at 30 days from invoice submission. Performance and payment bonds are not required for bids under $100,000.

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 541380
New
Federal
Groundwater Monitoring in Wabasha County, MN
Solicitation # W912ES27QA013
The U.S. Army Corps of Engineers, St. Paul District, is soliciting offers for a firm fixed price contract to provide groundwater and surface-water monitoring services for the Grand Encampment Dredge Material Placement Site Unload project near Kellogg, Minnesota. This procurement is a 100% small business set-aside under NAICS 541380. The contractor will be responsible for collecting and analyzing water samples from three monitoring wells and up to four residential wells, as well as sampling the Zumbro River and infiltration pit standing water. All analytical testing must be performed by a laboratory accredited under the Minnesota Environmental Laboratory Accreditation Program. The scope of work is divided into three phases: Pre-Placement baseline sampling occurring 90, 60, and 30 days before transfer; Active Placement sampling at specific intervals starting 3 days after transfer begins; and Post-Placement sampling at 30, 60, and 90 days following completion. Performance is scheduled from January 2027 through December 2027. Key deliverables include interim technical memoranda, an electronic data deliverable conforming to specific government specifications, and a final sampling and analysis report due within 50 calendar days of testing completion. Offerors must be registered in the System for Award Management and submit quotes via the PIEE Module by November 18, 2026. Evaluation will be based on price, technical rating, and past performance, with the government reserving the right to accept other than the lowest offer. The contractor must adhere to MPCA 2026 field sampling protocols and maintain strict confidentiality regarding private residential well owner information. Payment will be made in accordance with the Prompt Payment Act, noting that the St. Paul District does not utilize Wide Area Workflow for invoicing.
W07V Endist St Paul

POSTED

about 6 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The General Services Administration, through the Supply Chain Management Contracting Division, is seeking a subcontractor for Quality Assurance and Conformance Testing. This project focuses on independent testing to verify durability, fire retardancy, and a load capacity of 3,000 lbs, ensuring full compliance with MIL-STD and ASTM D-3951 standards. The work is designated for performance in Kansas City. This opportunity is a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on March 31, 2026, with a response deadline of April 1, 2026.

General Info

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Kansas City, MO, USA

Set-Aside

SBA

Documents

This scope was carved out of 47QSSC26Q9710.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NSN 8115015829710; Shipping Box

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Independent Materials TestingOpen now, due in 36 days
  • Bid No. 2026-17 PROVIDING TO THE DORCHESTER COUNTY DEPT. PUBLIC WORKS ELLIOTT ISLAND ROAD GEOTECHNICAL SERVICESOpen now, due in 9 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent testing for durability, 3,000 lb load capacity, fire retardancy, and compliance with MIL-STD and ASTM D-3951 standards.

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

NAICS: 334416
New
Federal
Purchase Olson Electrics 300k Pad Mount Transformer
Solicitation # 47QSSC27Q0027
Solicitation 47QSSC27Q0027 is a request for quote for the purchase and delivery of one Olsun Electrics 300 kVA Cast Coil Pad Mount Transformer for NAVFAC SW MPD HVE Utilities. The procurement is designated as brand name, with no substitutions accepted, because only Olsun provides the specific radial feed-through dry type transformers required for the installation where liquid-filled alternatives are not feasible. The estimated contract value ranges between 141,334.00 and 172,427.48 USD. Technical specifications require a 3-phase, 60 Hertz unit with a NEMA 3R 316 stainless steel enclosure in Munsell Green, primary voltage 12000D, and secondary voltage 208Y/120. The unit must be American made in accordance with Buy American requirements and include IEEE/ANSI factory production test reports. The contract will be awarded based on the lowest evaluated price to a responsible offeror who passes all administrative compliance checks. Valid quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, with the updated delivery location specified as the East Miramar Marine Corps Base storage facility. Vendors are required to be registered in SAM.gov and the OMS Vendor Portal or EDI. Packaging and marking must strictly adhere to MIL-STD-129R for military deliveries, including the use of specific 2D barcodes and Transportation Control Numbers.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 334416
New
Federal
Purchase Olsun Electrics 225 KVA Transformer
Solicitation # 47QSSC27Q0028
Solicitation 47QSSC27Q0028 is a Request for Quote issued by the General Services Administration on behalf of NAVFAC SW MPD HVE Utilities for the purchase and delivery of one Olsun Electrics 225kVA Cast Coil Transformer. This equipment is mission-critical for operations at Naval Base San Diego, California. The transformer must be a 3-phase, 60 Hertz, copper wound, pad-mounted unit with a NEMA 3R cold rolled 316 stainless steel enclosure. Technical specifications include a primary voltage of 12000D, secondary voltage of 208Y/120, and a radial feed-through design with three 200A bushing wells. Due to specific technical requirements and a lack of containment pads for oil-filled alternatives, this is a brand-name procurement, and no substitutions will be accepted. The contract will be awarded on a Lowest Price Technically Acceptable basis to a responsible offeror who passes an administrative compliance review. To be considered valid, quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, to Naval Base San Diego. The awarded vendor must comply with MIL-STD-129R marking and shipping label requirements and provide factory test results, including IEEE/ANSI Standard production tests. Estimated total dollar values for the procurement are cited between $120,364.00 and $146,844.08.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

3 days ago

DEADLINE

in 24 days
View Details
NAICS: 332999
New
Federal
Vehicle Lift System - Mobile Column Type
Solicitation # 47QSSC27Q0045
The General Services Administration Direct Demand Contract Solutions Division is soliciting quotes for one Vehicle Lift System, Mobile Column Type, specifically Sanitz Enterprises part number AP1001321 or an approved equal. The required system must consist of eight synchronized mobile lifting columns, each with a minimum capacity of 19,000 pounds, capable of accommodating tires up to 63 inches in diameter and 12 inches deep. Key safety requirements include wheel-engaging lifting forks or brackets and mechanical safety locks to secure loads at various heights. Delivery is specified as FOB Destination to Fort Bliss, Texas, and vendors must be registered to receive purchase orders via the OMS Vendor Portal or EDI. Award will be based on the lowest evaluated price for offerors who pass a pass/fail evaluation of administrative compliance and technical acceptability. Administrative compliance requires the complete submission of all RFQ fields, Section 3 questions, and required clauses. Technical acceptability for non-brand name offers requires the submission of manufacturer specifications for an equal determination. All shipments must adhere to strict packaging and marking standards, including MIL-STD-129R for military deliveries, which mandates specific 2D bar-coding and the inclusion of a Transportation Control Number on the shipping label.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332216
Federal
Purchase NSN 5120001692986, TORQUE WRENCH MULTIPLIER
Solicitation # 47QSSC27Q0042
The General Services Administration is soliciting quotes for the purchase of six Power-Dyne PD1201 Torque Wrench Multipliers (NSN 5120001692986). This is a brand-name acquisition where no substitutions or deviations are permitted. The required equipment must feature a torque capacity of 0 to 1,200 foot-pounds, a 25 foot-pounds scale graduation with an analog gauge signal, a 3/4 inch internal square drive output, and a 3/8 inch internal square drive input. Each unit must be made of steel, have a 6-inch crank length, operate between -20 and 130 degrees Fahrenheit, and include a carrying case. Items must be permanently marked with the manufacturer's name, part number, and country of origin. This procurement is a total set-aside for small businesses under NAICS 332216, requiring vendors to have a size standard of 750 employees or less. Award will be based on the lowest price for offerors who pass the administrative compliance review. Valid quotes must include a signed and dated RFQ document and a signed MIL-STD-129R compliance form. Delivery is FOB Destination, CONUS, to Norfolk, Virginia. Packaging and marking must adhere to GSAM and MIL-STD-129R standards, including the use of 2D (PDF417) bar codes and Military Shipping Labels. The contract is subject to the Buy American Act and standard commercial terms and conditions.
Saw Blade and Handtool Manufacturing

POSTED

7 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS