Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance and Design Verification

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 12 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.
OC Waste & Recycling

POSTED

about 13 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.
Warren County

POSTED

about 14 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.
City of Virginia Beach

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 16 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
DIBBS
Medical Device Sterilization and Packaging
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
DIBBS
First Article Test (FAT) and Certification
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
DIBBS
Critical Application Testing and Quality Assurance
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
DIBBS
Electrical Cable Assembly Quality Validation and PLT
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This subcontract for Quality Assurance and Design Verification supports prime contractors on DLA Mechanicsburg supply contracts. The scope of work involves performing independent testing and verification of assemblies against Cage Code 0ERB9 designs, utilizing multimeters, diagnostic software, and specialized testing rigs to verify serialization and unique item identifiers. The contractor is responsible for ensuring all deliverables meet Department of Defense Single Stock Point specifications and providing formal design compliance certifications and quality assurance reports. This opportunity is managed by the Department of Defense under agency SPRMM1 DLA Mechanicsburg with a response deadline of September 30, 2026.

General Info

QA and design verification subcontract for DLA Mechanicsburg, deadline September 30, 2026.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QGB74.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ASSY, CONTROL PANEL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs independent testing and verification for prime contractors on DLA Mechanicsburg supply contracts. Tests assemblies against Cage Code 0ERB9 designs and verifies unique item identifiers (UID) and serialization using testing rigs, multimeters, and diagnostic software. Ensures compliance with Department of Defense Single Stock Point (DODSSP) specifications. Delivers quality assurance reports and design compliance certifications.

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 488410
New
Federal
MIL-SPEC Packaging and Preservation for Mechanical AssembliesThis subcontract involves providing specialized preservation, packaging, and marking services for mechanical conduit assemblies supporting prime contractors on DLA Mechanicsburg supply contracts. The scope of work requires the use of industrial marking and labeling equipment to ensure all items are processed and delivered ready for FOB Destination shipment. Compliance is mandatory with specific military standards, including MIL-STD-2073 for packing and preservation, as well as MIL-STD-129 and SPI 03950-10184 for package marking. This Department of Defense requirement falls under NAICS code 488410 and is managed by the SPRMM1 DLA Mechanicsburg agency.
Motor Vehicle Towing

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
Federal
Manufacture of Mechanical Conduit AssembliesThis subcontract involves the manufacture of custom mechanical conduit assemblies for prime contractors supporting DLA Mechanicsburg. The scope of work requires the fabrication of three specific assemblies identified by NIINs 017027712, 017027714, and 017027719. All production must strictly adhere to TDP Version 002 and specified CAGE codes, with physical identification meeting MIL-STD-130, Rev N standards. To qualify, the provider must possess precision machining equipment and maintain CMMC certification. It is explicitly noted that additive manufacturing is prohibited for these components. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334111
New
Federal
Supply of Flat Panel Monitors (NSN 7025-01-738-4182)This subcontract involves the procurement and delivery of 20 flat panel monitors, identified by NSN 7025-01-738-4182, to support prime contractors for DLA Mechanicsburg. The selected provider is responsible for manufacturing or procuring the monitors according to specified Cage Codes, ensuring all items undergo quality assurance and are marked in accordance with MIL-STD-130, REV N. Additionally, all products must be preserved and packed following MIL-STD-2073 guidelines before being delivered to destination PA5CTQ. To qualify, the contractor must provide proof of being an OEM CAGE code holder or an authorized distributor and must maintain CMMC Level 1 self-certification. This requirement falls under NAICS code 334111 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.
Electronic Computer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488410
New
Federal
MIL-STD-2073 Packaging and FulfillmentThis subcontract, managed by the Department of Defense through DLA Mechanicsburg, involves specialized military packaging and fulfillment services for prime contractors. The scope of work focuses on the preparation of VME chassis units, requiring strict adherence to MIL-STD-2073 packaging standards and the application of hazard warning labels in accordance with DFARS 252.223-7001. To ensure the protection of sensitive electronics, the contractor must utilize moisture barriers and anti-static bags. The final deliverable consists of five fully packaged units prepared for shipment to designated points of delivery V21948 and W25G1U. This requirement falls under NAICS code 488410, with a response deadline set for November 25, 2026.
Motor Vehicle Towing

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334419
New
Federal
VME Chassis Manufacturing (12-Slot)This subcontract with the Department of Defense, managed by DLA Mechanicsburg, involves the manufacture of five 12-slot VME chassis structures for prime contractors. The project requires the fabrication of enclosures based on design reference 63E920406P3 and the integration of 12 VME card slots. All units must be marked according to MIL-STD-130, REV N standards. The production process necessitates the use of military-grade materials and precision CNC milling and bending equipment. This effort falls under NAICS code 334419, with a response deadline set for November 25, 2026.
Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332710
New
Federal
CONDUIT ASSEMBLY,ME
Solicitation # SPRMM127QGA28
Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.
Machine Shops

POSTED

about 22 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
Federal
CHASSIS,VME,12 SLOT
Solicitation # SPRMM126QMB73
This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of five VME 12-slot chassis (NIIN 016433096) based on the design from Cage Code 16331, reference number 63E920406P3. The requirement is split between two delivery locations: one unit for CLIN 0001AA shipping to USS MCFAUL (V21948) and four units for CLIN 0001AB shipping to the DLA Distribution New Cumberland facility (W25G1U). The response deadline has been extended to November 25, 2026, and delivery days have been increased from 30 to 60. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. The contract mandates strict adherence to quality and packaging standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. Inspection and acceptance are designated at the origin, specifically at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically through the Wide Area WorkFlow (WAWF) system. Offerors must be registered in the System for Award Management (SAM) and, if they are not the original equipment manufacturer, must provide the OEM's Cage code and part number. The procurement also includes standard FAR and DFARS clauses regarding the Buy American Act, cybersecurity incident reporting, and the prohibition of certain telecommunications equipment.
Machine Shops

POSTED

about 22 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333998
New
Federal
MONITOR,FLAT PANEL
Solicitation # SPRMM126QKH35
This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of 20 flat panel monitors (NSN 7025-01-738-4182). The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must provide the Original Equipment Manufacturer (OEM) CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. Technical acceptability may be verified through original quotations, invoices, or contractual agreements from approved sources. The contract requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with specific DLR labeling requirements for applicable items. Inspection and acceptance will occur at the origin, and the contractor is responsible for all quality assurance and the maintenance of inspection records for 365 days post-delivery. Payment and invoicing must be processed electronically via PIEE-WAWF using the SPRMM1 DoDAAC. Additionally, the contractor must comply with CMMC Level 1 self-certification and various cybersecurity and trade agreement certifications, including the Buy American Act.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
New
Federal
48--VALVE,REGULATING,FL
Solicitation # SPRMM126QKJ13
The Department of Defense, through DLA Maritime Mechanicsburg, is conducting a sources sought market survey under solicitation SPRMM126QKJ13 for the procurement of 13 regulating valves. The required items are identified by NSN 7H-4820-011728194 and part number 73850-2MOD1. This is a Foreign Military Sales requirement, and the final destination will be provided upon request. The government has determined that it is uneconomical to purchase the data rights or reverse engineer the part, and as such, it does not own the technical data required for the repair or purchase of this item from additional sources. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is currently seeking capability statements and interest from all responsible sources to determine if a competitive procurement is warranted. This action is designated as a total small business set-aside. Interested parties must submit their responses by December 11, 2026. The government is specifically requesting information regarding the commercial status of the item per FAR 2.101(b), typical delivery lead times, and whether FOB Origin and Inspection/Acceptance Origin terms are acceptable. All inquiries and submissions should be directed to Alexander Davies.

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339999
New
Federal
MIL-SPEC Marking and DLR PackagingThis subcontract, titled MIL-SPEC Marking and DLR Packaging, involves providing specialized marking and packaging services for prime contractors under DLA/NAVSUP supply contracts. The scope of work focuses on the physical identification of IMU-NT3 units in accordance with MIL-STD-130 and the application of DLR labels featuring yellow text on a blue background per MIL-STD-129. Additionally, the contractor is responsible for applying specific color-coded SMIC code markings, including L1, S1, and D4/D5/D7. The project requires the execution of palletization and final packaging following MIL-STD-1330 standards to ensure units are ready for transport. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The response deadline for this requirement is November 9, 2026.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
Federal
Precision Manufacture of Inertial Measurement Unit (IMU-NT3)This subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the precision manufacture of Inertial Measurement Unit (IMU-NT3) hardware components for prime contractors on DLA/NAVSUP supply contracts. The scope of work requires the fabrication and assembly of units in strict accordance with TDP Version 002 and design reference DTS10095-01-002. The contractor must adhere to rigorous quality and regulatory standards, including MIL-STD-130 and MIL-STD-129, while implementing a comprehensive Counterfeit Detection and Avoidance Program (CDAP) to ensure supply chain traceability. Final deliverables consist of completed IMU-NT3 hardware units accompanied by full traceability documentation. The opportunity is categorized under NAICS code 334413.
Semiconductor and Related Device Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
Federal
IMU-NT3
Solicitation # SPRMM127QGA27
This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture of the IMU-NT3 (NIIN: 016939087) in accordance with the design represented by Cage Code 34NS0 and Technical Data Package version 002. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging, with specific requirements for domestic and overseas shipments. Inspection and acceptance will occur at the origin, with the contractor maintaining primary responsibility for quality assurance and record retention for 365 days following final delivery. The procurement mandates the use of PIEE-WAWF for electronic submission of invoices and receiving reports. Offerors who are not the original equipment manufacturer must identify the OEM and, if acting as a distributor, provide signed proof of authorization on company letterhead. Additionally, any hazardous materials delivered under this contract require the submission of GHS-compliant labels and Safety Data Sheets to NAVSUP WS Code N242 prior to award. The solicitation also incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires offerors to certify their tax liability and criminal conviction status.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
First Article Testing and Reporting Services
Al DLA Aviation At Huntsville

POSTED

about 2 months ago

CLOSED

26 days ago
View Details
NAICS: 541380
Closed
Federal
Testing & Commissioning Agency
Network Contract Office 23 (36C263)

POSTED

about 2 months ago

CLOSED

8 days ago
View Details
NAICS: 541380
Closed
Federal
Testing Laboratory & Special Inspections
255-NETWORK Contract Office 15 (36C255)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
Federal
Aerospace Component Inspection and Quality Assurance
Ok DLA Aviation At Oklahoma City

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
Federal
Certified Environmental Laboratory Analysis
DLA Distribution

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Federal
Navigation System Performance & Environmental Testing
Navsup Weapon Systems Support

POSTED

about 2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
Closed
Federal
Fuel Testing and Analysis Services
262-NETWORK Contract Office 22 (36C262)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
Federal
Field Quality Control Testing
257-NETWORK Contract Office 17 (36C257)

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Non-Destructive Testing (NDT) and Quality Validation
Ok DLA Aviation At Oklahoma City

POSTED

about 2 months ago

CLOSED

23 days ago
View Details
NAICS: 541380
Awarded
Federal
RMRS FIA Genetic Tree Sampling
Solicitation # 1284LL26Q0061
Csa Intermountain 1 Usda-Fs

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Awarded
Federal
52000QR260028423-CGC Reliance Dockside Strain Gauge Alignment Inspection
Solicitation # 52000QR260028423
Sflc Procurement Branch 1(00080)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Awarded
Federal
Post-Accident Toxicological Testing
Solicitation # 693JJ626Q000028
693JJ6 Federal Railroad Administration

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS