Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a small business to provide third-party quality inspection and sampling services in accordance with MIL-STD-1916, specifically utilizing verification levels VII, IV, and II to ensure compliance with military quality standards. The work involves conducting inspections, collecting representative samples, and delivering detailed documentation and reporting that aligns with government protocols, ensuring transparency and traceability throughout the quality assurance process. All activities must be conducted with precision and in full adherence to the specified military standard to validate the integrity of delivered materials and components. Performance of the contract is required at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is issued as a total small business set-aside under the SBA program, limiting eligibility to firms certified as small businesses per FAR 19.5. The North American Industry Classification System code 811211 identifies the scope within repair and maintenance services. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal to be considered for award.

General Info

Small business to perform MIL-STD-1916 quality inspections at New Cumberland, PA, under DOD set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform third-party quality inspection and sampling per MIL-STD-1916 with verification levels VII, IV, and II, including documentation and reporting per government standards.

Similar Contracts

Same NAICS industry code

Unscheduled Repair Services for Weighing and Control SystemsThe contract calls for the provision of unscheduled repair services for truck scale, indicator, printer, and scoreboard systems at DLA Jacksonville, with a primary focus on rapid troubleshooting, diagnosis, and on-site repair or component replacement to restore full operational functionality. Services must be delivered promptly in response to unexpected failures or malfunctions, ensuring minimal downtime for critical weighing and control systems used in logistics and disposition operations. The work requires skilled technicians capable of handling a range of electronic and mechanical components, with an emphasis on reliability, timeliness, and adherence to operational standards. The contract is classified as a subcontract under NAICS code 811211 and is open for responses until August 7, 2026, with the performance location set at Jacksonville, Florida, zip code 32244. The Department of Defense, through DLA Disposition Services, is the overseeing agency, and all work must be conducted in support of its mission to maintain accurate and dependable weighing systems. There is no set-aside designation, and bidders must be prepared to meet urgent service demands without prior notice, ensuring 24/7 readiness and responsiveness to system outages.

DLA Disposition Services - Ebs

POSTED

about 20 hours ago

DEADLINE

Annual Calibration and Preventive Maintenance for Industrial Truck ScaleAn annual on-site calibration and preventive maintenance service is required for a Fairbanks IND-R2500-FL truck scale located in Jacksonville, 32244. The work includes comprehensive inspection, cleaning, testing, and adjustments to ensure the scale operates accurately in accordance with the original equipment manufacturer’s standards. All services must be performed annually to maintain operational integrity and compliance with industry and federal requirements for industrial weighing systems. The contract is classified as a subcontract under NAICS code 811211 and is managed by the Department of Defense through DLA Disposition Services. Proposals are due by August 7, 2026, and the opportunity was posted on July 17, 2026, with no specific set-aside designation or point of contact provided.

DLA Disposition Services - Ebs

POSTED

about 20 hours ago

DEADLINE

Hazard Warning Labeling and MarkingThe contract requires the application of hazard warning labels and markings to medical kits and shipping containers in strict adherence to military marking standards, ensuring proper identification and handling of potentially dangerous materials during transport and storage. The work must be performed to meet the specific regulatory and safety requirements established by the Department of Defense, with all labeling conforming to approved military specifications for clarity, durability, and placement. This subcontract, managed under the Medical Supply Chain MD Surg FSF, is set for performance at a military postal address with zip code 96672-4090, reflecting operations tied to overseas or mobile military logistics. The solicitation was posted on July 16, 2026, with responses required by July 22, 2026, under the NAICS code 811211, indicating a focus on commercial and industrial cleaning services with specialization in labeling and marking. The contract is part of the broader DoD supply chain infrastructure, emphasizing compliance, precision, and reliability in the handling of critical medical inventory.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military Marking and UID LabelingThis contract requires the application of permanent UID markings in strict accordance with MIL-STD-130N and the placement of shipping labels compliant with MIL-STD-129, using methods that ensure full alignment with the IUID registry requirements. The work involves precise labeling of defense-related items to meet federal standards for item identification and traceability throughout the defense supply chain. The contract is structured as a subcontract under the Defense Logistics Agency, operating under the Department of Defense, and is categorized under NAICS code 811211, which pertains to industrial and commercial machinery and equipment repair and maintenance. All work must be performed in compliance with the specified military standards to ensure regulatory adherence and logistical accuracy, with no designated point of contact or specific location provided for performance. The solicitation was posted on July 16, 2026, and the contract is accessible via the DIBBS platform under award number SPE7L326P4918.

Defense Logistics Agency

POSTED

DEADLINE

Military Marking, Labeling, and BarcodingThe contract requires compliance with MIL-STD-129 for the application of markings and barcodes on military equipment and supplies, covering unit, intermediate, and exterior containers to ensure accurate tracking and logistics management throughout the defense supply chain. All labeling must meet stringent Department of Defense standards for readability, durability, and data accuracy, with barcodes enabling seamless integration into automated inventory and distribution systems. The work is to be performed at the FPO location with zip code 09834-2800, and the solicitation is designated as a subcontract under NAICS code 811211, indicating services related to industrial and commercial cleaning and maintenance support. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026, and is issued by the Fluid Handling Division of the Department of Defense. While no set-aside preferences or point of contact details are provided, bidders must ensure full adherence to all technical specifications outlined in MIL-STD-129 and be prepared to demonstrate capability in producing and applying compliant labels under time-sensitive defense logistics requirements. The solicitation is accessible via the DIBBS system, and proposals must be submitted through the designated platform prior to the deadline.

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-STD-129 Marking and Bar-Coding ServicesThe contract calls for the application of standardized military markings and machine-readable bar codes in accordance with MIL-STD-129 to ensure seamless logistics tracking and full integration into the Department of Defense supply chain. All work must meet precise technical specifications for label content, print quality, bar code formats, and placement to guarantee accurate identification and automated data capture at every point of handling. The requirement applies to equipment, containers, and packaging managed under the Land Supplier Operations Vehicle Support program, with performance specifically anchored at Tracy, California, 95304-5000. This is a subcontract opportunity with a NAICS code of 811211, indicating it falls under repair and maintenance services. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and is administered by the Department of Defense. While set-aside details are not specified, the contractor must possess the capability to execute MIL-STD-129 compliance at scale, supporting the DoD’s end-to-end visibility goals. All work must be completed on schedule to avoid disruption to military logistics operations, and adherence to the standard is mandatory for contract fulfillment.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Assurance and Inspection SupportThe contract titled Quality Assurance and Inspection Support is a small business set-aside subcontract under the NAICS code 811211, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive support for origin inspection activities, including the preparation of documentation and samples, and full adherence to ISO 9001 quality management standards as well as Federal Acquisition Regulation quality clauses. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026, and is open exclusively to small businesses as defined under the Small Business Administration’s Total Small Business Set-Aside criteria. The scope emphasizes compliance with rigorous quality protocols to ensure product integrity and regulatory alignment throughout the inspection process, with performance expected to meet Department of Defense standards despite the absence of a specified place of performance or point of contact details.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Pharmaceutical Packaging and Labeling ServicesThe contract seeks specialized commercial packaging, preservation, and labeling services for pharmaceutical units under strict military and federal compliance standards, with emphasis on environmental controls and adherence to shelf-life requirements. All work must meet rigorous quality and regulatory benchmarks to ensure the integrity, safety, and longevity of pharmaceutical products throughout the supply chain. The services are intended to support the Department of Defense’s Medical Supply Chain Pharmaceutical FSA, with performance expected in alignment with defense logistics protocols, though the precise location of performance is unspecified. The opportunity is structured as a subcontract with a response deadline of July 22, 2026, and was posted on July 16, 2026, under NAICS code 811211, indicating a focus on other personal services related to cleaning and packaging activities. There is no set-aside designation, and details such as point of contact, office address, or place of performance are not provided, suggesting bidders must rely on the official DIBBS platform linked in the solicitation for full requirements and submission instructions. Participation requires demonstrated capability in handling sensitive pharmaceutical materials under controlled conditions compliant with federal and military regulatory frameworks.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires the performance of in-house quality inspections according to MIL-STD-1916 or ASQ Z1.4 standards, ensuring products meet defined acceptance criteria through systematic and documented evaluation processes. A quality management system compliant with either SAE AS9003 or ISO 9001 must be established and maintained to support inspection activities, demonstrating structured control over processes, documentation, and continuous improvement. The work is intended to support the ASC COMMODITIES DIVISION under the Department of Defense, with performance specifically located in New Cumberland, Pennsylvania, at the zip code 17070-5002. This is a subcontract opportunity with a response deadline of July 21, 2026, and is categorized under NAICS code 811211, indicating focus on repair and maintenance services. All activities must align with federal defense quality requirements, and the offering party must be prepared to demonstrate compliance with military and industry quality standards through evidence of procedures, training, and audit readiness.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires pre-shipment inspection and documentation services to verify that all supplied goods fully conform to the specified contractual requirements, ensuring readiness for government acceptance at the destination. This includes comprehensive quality control measures to identify any nonconformities before shipment, as well as the preparation of detailed technical and compliance documentation necessary for regulatory review and final approval by U.S. government authorities. Performed under a subcontract arrangement with the Defense Logistics Agency under the Department of Defense, the work is classified under NAICS code 811211 and is intended to support the successful acceptance of materiel by government entities overseas. The inspection and documentation process must align strictly with defense standards and protocols, with emphasis on traceability, accuracy, and timeliness to prevent delays or rejections at the receipt point. All activities are bound by the terms of the parent contract SPE7LX21D0007 and the delivery order SPE7L126FAT9K, with compliance and adherence to technical specifications being paramount for mission success.

Defense Logistics Agency

POSTED

DEADLINE

Military Marking, Labeling, and BarcodingThe contract requires the application of permanent markings, barcodes, and hazard labels on military equipment and materials in full compliance with MIL-STD-129 standards, ensuring proper identification and traceability across the supply chain. Physical identification must also align with RQ017 requirements and OSHA hazard communication regulations to ensure safety and regulatory adherence. The work is to be performed at a designated location in Greensboro, North Carolina, with the zip code 27409, and falls under the NAICS code 811211, indicating services related to industrial and commercial cleaning and maintenance. This is a subcontract opportunity issued by the ASC Commodity Division under the Department of Defense, with proposals due by July 24, 2026, and the solicitation posted on July 16, 2026. All deliverables must meet exacting military and safety standards to support logistics and operational readiness.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of quality inspections at the origin to ensure compliance with defined Acceptable Quality Level standards, supporting a robust and auditable inspection system aligned with either AS9003 or ISO 9001. This subcontract is focused on maintaining stringent quality control measures for defense-related activities, ensuring all inspected products meet required specifications before further processing or delivery. The work is to be conducted in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s DDSP New Cumberland Facility, with compliance to federal quality assurance frameworks being a core obligation. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and the work falls under the NAICS code 811211, indicating a focus on repair and maintenance services. While no specific set-aside designation or point of contact is provided, the contract’s structure and location underscore its alignment with critical defense supply chain requirements. Potential contractors must demonstrate proven experience in origin inspections and documented adherence to internationally recognized quality management systems to be considered eligible.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 15 hours ago

DEADLINE

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE