Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance & Inspection Services (MIL-STD-1916 Sampling)

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of comprehensive quality assurance and inspection services utilizing MIL-STD-1916 and ASQ Z1.4 sampling standards to verify zero defects in critical product attributes. All inspection activities must adhere strictly to these military and industry-standard sampling procedures to ensure the highest level of product integrity and compliance. The work is focused on incoming and outgoing inspections, targeting essential features where failure is not tolerable, with the ultimate goal of delivering defect-free outcomes through rigorous, standardized quality control practices. The agreement is designated as a subcontract under NAICS code 541330 and is issued by the ASC Commodities Division of the Department of Defense. Performance is required at a designated location in Virginia Beach, Virginia, with a postal code of 23459-3018. The solicitation was posted on July 19, 2026, and responses must be submitted by July 27, 2026, leaving a limited window for preparation and submission. While no set-aside status is specified, interested parties must meet all technical and procedural requirements outlined in the solicitation to be considered for award.

General Info

Quality assurance services per MIL-STD-1916 and ASQ Z1.4 for zero defects in Virginia Beach, DoD subcontract.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

VIRGINIA BEACH, VA, 23459-3018, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform incoming and outgoing quality inspections using MIL-STD-1916 or ASQ Z1.4 sampling to ensure zero defects in critical attributes.

Similar Contracts

Same NAICS industry code

Quality Inspection & Sampling ServicesThe contract requires the performance of quality inspections and sampling activities in strict accordance with MIL-STD-1916 or ASQ H1331 standards to ensure that no non-conformances are present prior to delivery. The work is structured to uphold a zero-defect standard, demanding rigorous adherence to established military and industry quality protocols throughout the inspection process. This subcontract is issued under the NAICS code 541330 and falls under the oversight of the Defense Logistics Agency within the Department of Defense, indicating its critical role in supporting defense supply chain integrity. The contract is posted as of July 20, 2026, and is accessible via the DIBBS system with the contract number SPE4A726PE034, though specific location or point of contact information is not provided.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Inspection and Quality Assurance (FAR 52.246-2 & MIL-STD-1916)

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

Technical Data and Drawing Interpretation Services

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Acceptance at Origin

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Inspection Coordination

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires performing pre-shipment quality inspections on products using either MIL-STD-1916 or ASQ Z1.4 zero-conformance sampling plans to ensure compliance with stringent acceptance criteria. All inspections must be conducted with full traceability, including detailed documentation that links each inspection result to specific lots, batches, or individual units, ensuring end-to-end accountability and audit readiness. The work supports the Department of Defense’s FLEET READINESS CENTER and is issued as a subcontract under NAICS code 541330, indicating technical and scientific consulting services. Bidders must submit responses by July 24, 2026, with no set-aside designation specified, meaning eligible contractors of any size may compete. The place of performance and contact details are not provided, but all activities are expected to align with the agency’s operational requirements for military readiness and supply chain integrity.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 9 hours ago

DEADLINE

MIL-STD-130 Compliant Item Marking and Data Matrix LabelingThe contract requires the application of unique item identifiers using Data Matrix barcodes in full compliance with MIL-STD-130 standards on delivered drums, ensuring each item is permanently and machine-readable labeled in accordance with Department of Defense requirements. This includes the end-to-end process of generating unique item identifiers, encoding them into Data Matrix symbols, and verifying their accuracy through automated systems to guarantee traceability and data integrity throughout the supply chain. The work must be performed with strict adherence to technical specifications, with all labeling processes validated to meet military marking and data standards. This subcontract falls under NAICS code 541330 and is issued by the Defense Logistics Agency under the Department of Defense. Although specific performance locations and contact details are not provided, the contract is associated with the award number SP450023D0025 and delivery order SP450026F6557. The posting date of July 20, 2026, indicates the timeframe for fulfillment, and the requirement to use automated verification systems underscores the importance of precision, repeatability, and audit compliance in marking operations. All deliverables must ensure seamless integration with DoD logistics and inventory tracking systems.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThe contract requires third-party inspection and testing services for valves to ensure full compliance with Defense Logistics Agency and ASTM standards covering material integrity, pressure performance, and associated documentation. The work must be executed to verify that all components meet the rigorous technical and regulatory requirements set by the Department of Defense, with a focus on quality assurance across the entire supply chain. The inspection process is critical to maintaining operational readiness and ensuring that valves used in defense systems are reliable and safe under demanding conditions. Performance of the services is designated to occur at Fort Eustis, Virginia, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. This is a subcontract under the NAICS code 541330 for engineering services, and while no set-aside type is specified, the work is intended to support the Defense Logistics Agency’s mission to supply essential materials and components to the military. All deliverables must align precisely with specified industry and defense standards, and non-compliance could result in rejection of goods or termination of contract obligations.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Origin Acceptance SupportThe contract requires the performance of pre-shipment quality inspections and comprehensive support for origin acceptance to ensure that all delivered goods meet the technical and quality standards established by the Defense Logistics Agency. The work must adhere strictly to the Federal Acquisition Regulation clauses FAR 52.246-2 and FAR 52.246-11, which govern contractor quality assurance and inspection requirements, ensuring that products are free from defects and comply with all applicable specifications prior to shipment. This includes verifying documentation, inspecting physical characteristics, and confirming the legitimacy and compliance of the origin of supply to prevent acceptance of nonconforming or unauthorized items. The contract is classified as a subcontract under the NAICS code 541330, indicating it involves scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026, offering a limited window for interested parties to submit proposals. While specific geographic performance locations are not detailed, the work will likely involve inspections at manufacturing, warehousing, or shipping facilities globally, supporting the broader logistics and supply chain integrity of defense materiel. All activities must align with DLA’s rigorous quality control protocols to guarantee the dependability and readiness of defense-supplied commodities.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Technical Data and Configuration Management SupportThe contract focuses on providing technical data and configuration management support aligned with Defense Logistics Agency standards and formal approval protocols. It requires the management of technical data, configuration changes, waivers, and deviations through established compliance procedures to ensure accuracy, traceability, and adherence to military specifications. All activities must follow defined DLA processes to maintain system integrity and documentation integrity across the lifecycle of defense-related equipment and systems. This subcontract, classified under NAICS code 541330, is issued by the ASC Supplier Operations OEM Division under the Department of Defense and is open for responses until August 20, 2026. The work is expected to support critical defense supply chain functions, with performance tied to the agency’s operational requirements. While specific location details are not provided, the nature of the work implies coordination across multiple defense platforms and logistics nodes. Interested parties must engage through the designated DIBBS portal to submit proposals in accordance with federal procurement guidelines.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Aerospace Quality Assurance and Documentation ServicesThe contract entails providing quality assurance and documentation support for flight control components, with a primary focus on developing and validating comprehensive traceability packages to ensure regulatory and operational compliance. This work is critical to maintaining the integrity of aerospace systems and requires meticulous attention to detail in documentation processes, data accuracy, and adherence to defense standards. The services are delivered as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and are governed by the NAICS code 541330, indicating engineering and technical services. The contract was posted on July 20, 2026, and is identified by the award number SPE4A726P7119, with performance location details unspecified. Although no set-aside information or point of contact is provided, the nature of the work suggests it supports national defense aerospace programs requiring rigorous documentation and quality control protocols. The scope demands expertise in aerospace quality systems and the ability to produce auditable, end-to-end traceability records for flight-critical components, ensuring that all parts meet stringent military and industry specifications.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Quality Inspection & Origin Acceptance SupportThe contract requires support for government-origin inspection activities, focusing on maintaining accurate records, preparing detailed test reports, and ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling plans to validate product compliance. All work must be performed at the designated place of performance in FPO with zip code 96306-1204, and the contractor is expected to deliver consistent quality assurance procedures aligned with Department of Defense standards. The effort is structured as a subcontract under NAICS code 811212, with a response deadline of July 28, 2026, and was posted on July 20, 2026, by the ASC Commodities Division of the Department of Defense. While no specific set-aside status or point of contact is provided, the solicitation is accessible through the DIBBS platform for interested parties to review full requirements and submit proposals.

Computer and Office Machine Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

Domestic or International Logistics & DeliveryThe contract requires the coordination and execution of international logistics to deliver a bearing liner to Japan, encompassing all aspects of transportation, customs clearance where necessary, and the submission of WAWF-compliant invoices to ensure proper payment processing. The work is classified as a subcontract under the NAICS code 483111, indicating a focus on ocean transportation of freight, and is managed by the ASC Commodities Division within the Department of Defense. Performance is to be carried out in support of a military location identified by the FPO address with ZIP code 96306-1204, indicating the destination or operational area involves overseas military logistics. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside provisions specified, meaning the opportunity is open to all qualified subcontractors regardless of business size or status.

Deep Sea Freight Transportation

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Compliance & PackagingThe contract requires the provision of comprehensive hazard communication documentation and the implementation of compliant packaging and labeling for all shipments containing hazardous materials, strictly adhering to both military and OSHA safety standards. The successful proposer must ensure full alignment with regulatory requirements to guarantee safe handling, transportation, and storage of dangerous goods across military supply chains. All documentation must be accurate, up to date, and accessible to authorized personnel, while packaging materials and labeling systems must meet specified durability, clarity, and standardization criteria for use in operational environments. This subcontract, issued under NAICS code 541690 by the ASC Commodities Division under the Department of Defense, is targeted toward entities capable of delivering specialized compliance services in hazardous materials management. The opportunity is open for response until July 28, 2026, with performance expected to be conducted at the FPO address 96306-1204. The nature of the work demands expertise in federal and military regulatory frameworks, precise attention to detail, and the ability to maintain consistent compliance in dynamic logistics settings. Proposers must be prepared to demonstrate proven experience in supporting defense-related hazardous material operations and must provide evidence of systems and processes that ensure continuous adherence to all applicable safety and documentation mandates.

Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

Precision Metal Fabrication of Bearing LinerThe contract requires the manufacture of a precision-engineered bearing housing liner to full military specifications, demanding exacting adherence to dimensional tolerances, material composition, and quality control standards for use in defense applications. The product must meet rigorous performance and reliability criteria appropriate for critical military systems, with all manufacturing processes subject to strict compliance verification. Subcontractors are expected to demonstrate capability in high-precision metal fabrication and quality assurance protocols consistent with defense industry requirements. The solicitation is issued under NAICS code 332112 for forged and stamped metal product manufacturing, classified as a subcontract opportunity posted by the ASC Commodities Division of the Department of Defense. The response deadline is set for July 28, 2026, with performance to be carried out at FPO, ZIP 96306-1204. All submissions must be received by the stated deadline through the official DIBBS portal, and technical and compliance qualifications will be evaluated to ensure alignment with military-grade standards. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors capable of fulfilling the technical and logistical demands.

Nonferrous Forging

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Packaging & ShippingThis contract requires precise handling, labeling, packaging, and documentation of shipments containing hazardous coatings such as cadmium and hexavalent chromium, ensuring full adherence to OSHA’s Hazard Communication Standard and applicable military packaging regulations. The work involves strict compliance with federal safety protocols to mitigate risks associated with transporting toxic substances, with all procedures designed to safeguard personnel, the environment, and regulatory integrity throughout the shipping process. Packaging must meet specialized military standards, and all documentation must be accurate, complete, and readily accessible to authorized parties during transit and upon delivery. The opportunity is a subcontract under the Department of Defense’s ASC Commodities Division, with performance slated for Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The NAICS code 488999 indicates this relates to other support activities for air transportation, broadly encompassing specialized logistics services. Interested parties must respond through the DIBBS portal and ensure their capabilities align with the stringent requirements for hazardous materials handling under federal and military guidelines.

All Other Support Activities for Transportation

POSTED

about 9 hours ago

DEADLINE

Quality Testing & Inspection ServicesThe contract requires third-party verification of flat washers to stringent quality standards, focusing on dimensional accuracy, material composition, plating thickness, and legibility of markings. Inspection must be conducted per Level VII criteria with an Acceptable Quality Level of 0.1 and zero-defect sampling, meaning no defects are allowable and every unit must meet exact specifications. This high-bar inspection protocol ensures only flawless components are accepted, reflecting the mission-critical nature of the parts involved. The work is to be performed at the designated place of performance in Tracy, California, with the final delivery and verification outcomes subject to strict compliance with Department of Defense requirements. This subcontract falls under NAICS code 541380, indicating it is for other scientific and technical consulting services, and is sponsored by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, leaving a tight eight-day window for qualified vendors to submit proposals. The vendor must be prepared to deliver precise, documented verification results adhering to zero-tolerance standards, and the performance location and inspection protocol are non-negotiable. All work must be completed in alignment with DOD’s quality assurance expectations, and the contract is being issued through the DIBBS procurement platform, requiring digital submission and full regulatory compliance.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of 1,976 flat washers designated by NSN 5310001770978, all of which must fully comply with NASM25440 Revision NR 1 specifications and be marked in accordance with MIL-STD-130N standards. Quality control requires adherence to zero-defect sampling protocols, ensuring every unit meets stringent military-grade tolerances and traceability requirements. Production and delivery are targeted for performance at Tracy, California, with the specified zip code indicating the exact delivery point. Issued under the NAICS code 332313 for screw, nut, and bolt manufacturing, this subcontract is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and all bids must be submitted through the DIBBS platform. The contract emphasizes precision, compliance, and timely delivery, with no set-aside provisions applied, meaning any qualified supplier may respond. Performance obligations are tied to exact technical specifications and military marking guidelines, with failure to meet these criteria resulting in rejection.

Plate Work Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-STD-129 Packaging, Labeling, and Barcoding ServicesThe contract requires the provision of packaging, labeling, and 2D Data Matrix barcode application services for aircraft struts, fully compliant with MIL-STD-129R standards. All materials must be palletized in accordance with DLA RP001 requirements, ensuring proper handling, transport, and inventory management throughout the defense supply chain. The work demands strict adherence to military specifications for labeling content, barcode dimensions, placement, and durability to support automated scanning and logistical accuracy during distribution and receipt. This subcontract is issued under the NAICS code 323111 and is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026. While specific geographic performance details are not provided, the work is expected to support defense logistics operations across designated locations. Interested parties must ensure full compliance with all technical, regulatory, and procedural requirements detailed in the referenced standards to meet contractual obligations successfully.

Commercial Printing (except Screen and Books)

POSTED

about 9 hours ago

DEADLINE

Aircraft Strut SupplyThe contract requires the supply of 430 new and unused aircraft struts identified by NSN 1560-01-602-7772 and part number 70305-02105-045, with full traceability back to government origin and strict adherence to all technical specifications. The items must be delivered in compliance with military standards, ensuring fitness for use in defense aircraft systems. The solicitation is classified as a subcontract under NAICS code 336413, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 3, 2026, and a posted date of July 20, 2026. The place of performance and point of contact details are not specified, and no set-aside designation is indicated, meaning eligible suppliers of any size may respond. All proposals must be submitted via the DIBBS portal using the provided link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Setscrew Supply and DeliveryThe contract involves the supply and delivery of one unit of a setscrew identified by NSN 5305-01-475-2337, manufactured to meet strict military specifications, including compliance with labeling standards and hazardous materials handling protocols. The item required is a precision component intended for use in defense applications where dimensional accuracy, material integrity, and regulatory adherence are critical. The solicitation is classified as a subcontract under NAICS code 332722, indicating the work pertains to machine shop services involving the fabrication of precision metal components. The performance location is designated as FPO with zip code 09520, suggesting delivery to a military postal address, likely supporting overseas operations or logistics hubs. The contract was posted on July 20, 2026, with a response deadline of July 28, 2026, providing a narrow window for qualified suppliers to submit offers. The contracting agency is the ASC Commodities Division under the Department of Defense, which handles procurement for standardized military parts across branches. Although no set-aside type or point of contact is specified, the reference to DIBBS as the procurement platform confirms a formal, traceable acquisition process governed by federal contracting rules. All submissions must fully align with military standards to ensure compatibility, safety, and regulatory compliance during handling, storage, and field use.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply Chain Security Compliance (Prohibited Vendors)This contract mandates strict compliance with federal regulations prohibiting the use of telecommunications equipment or services from specified restricted vendors, including Huawei and ZTE, across all supporting systems and subcontracted components. The requirement aligns with FAR 52.204-25 and DFARS 252.204-7016, ensuring that no part of the supply chain involves prohibited technology, whether directly contracted or introduced through downstream suppliers. Contractors must perform due diligence to verify vendor eligibility and document compliance throughout performance, with verification potentially required during audits or inspections. Noncompliance risks contract termination, financial penalties, or debarment. The contract is issued under NAICS code 541512 for custom computer programming services and is structured as a subcontract under the Department of Defense’s ASC Commodities Division. It was posted on July 20, 2026, with a response deadline of July 28, 2026, and applies to all performance locations without geographic restrictions. While no set-aside designation or point of contact is specified, full adherence to the supply chain security provisions is a condition of award, placing the burden on the contractor to maintain traceability and certification of all components, systems, and third-party vendors involved in the deliverables.

Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE