Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

RF Testing and Quality Assurance Services

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled RF Testing and Quality Assurance Services mandates independent performance testing, environmental stress screening, and quality verification of antennas to confirm compliance with established technical specifications before delivery. The work is scoped to ensure that all RF capabilities and environmental resilience meet required standards under rigorous laboratory and simulated operational conditions, with outcomes directly tied to acceptance prior to shipment. The services are critical for maintaining reliability and performance integrity of defense-grade communication components. This subcontract is issued under NAICS code 541330 and is managed by the ACTIVE DEVICES DIVISION within the Department of Defense, with performance required at a facility in NEW CUMBERLAND, PA, zip code 17070-5002. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026. The contract does not specify a set-aside type or point of contact, and all proposals must be submitted through the designated DIBBS platform using the provided solicitation number SPE7M526T336B.

General Info

RF testing and quality assurance for defense antennas at New Cumberland, PA, due July 30, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent RF performance testing, environmental stress screening, and quality verification to ensure antennas meet technical specifications prior to delivery.

Similar Contracts

Same NAICS industry code

Technical Data and Configuration Management SupportThe contract focuses on providing technical data and configuration management support aligned with Defense Logistics Agency standards and formal approval protocols. It requires the management of technical data, configuration changes, waivers, and deviations through established compliance procedures to ensure accuracy, traceability, and adherence to military specifications. All activities must follow defined DLA processes to maintain system integrity and documentation integrity across the lifecycle of defense-related equipment and systems. This subcontract, classified under NAICS code 541330, is issued by the ASC Supplier Operations OEM Division under the Department of Defense and is open for responses until August 20, 2026. The work is expected to support critical defense supply chain functions, with performance tied to the agency’s operational requirements. While specific location details are not provided, the nature of the work implies coordination across multiple defense platforms and logistics nodes. Interested parties must engage through the designated DIBBS portal to submit proposals in accordance with federal procurement guidelines.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Quality Assurance & Government Acceptance SupportThe contract entails performing final inspections in accordance with Defense Logistics Agency requirements to ensure compliance with all technical and quality standards prior to government acceptance. It includes comprehensive support for government destination acceptance activities, ensuring that all delivered goods or services meet the specified criteria for approval. The contractor is responsible for preparing and submitting accurate documentation required for invoicing through the Wide Area Workflow system, maintaining meticulous records and adhering to federal procurement protocols. All work is performed under a subcontract arrangement with a NAICS code of 541330, indicating professional, scientific, and technical services, and is directly tied to Department of Defense operations managed by the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Quality Inspection and Government Acceptance SupportThe contract requires comprehensive pre-shipment inspection and testing of exhaust manifolds to verify compliance with strict dimensional, material, and performance specifications established for government acceptance at the destination. All activities must ensure that each unit meets or exceeds the required standards prior to shipment, with documentation and testing results supporting formal government acceptance. The work is performed under a subcontract arrangement tied to the Defense Logistics Agency, which operates under the Department of Defense, and is classified under NAICS code 541330 for engineering services. Inspection processes must be thorough and traceable, with results validated to meet federal quality assurance protocols, ensuring that only compliant components are accepted and delivered. The contract is active with a posting date of July 20, 2026, and is associated with a specific procurement reference linked to a DLA award, indicating it is part of a broader defense supply chain effort.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Technical Data Package (TDP) Development and Engineering SupportThe contract seeks the development of a comprehensive Technical Data Package (TDP) to support a government procurement effort, focusing on detailed technical documentation for design, materials, performance characteristics, and interchangeability requirements. This deliverable is critical to enabling a competitive contract offer and ensuring compliance with all applicable Department of Defense specifications and standards. The work involves engineering support to produce accurate, complete, and government-ready data that facilitates evaluation, manufacturing, and lifecycle management of the system or component under consideration. Submission is required by July 27, 2026, and the opportunity is structured as a subcontract under NAICS code 541330 for engineering services. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no set-aside designation or specific performance location is provided, the documentation must meet federal contractual and technical expectations. Interested parties must respond through the DIBBS portal by the deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Quality Inspection and Acceptance at Origin SupportThe contract requires third-party quality inspections at the contractor’s facility to ensure full compliance with government acceptance standards, enforcing a zero-tolerance policy for any defects. Inspections must follow either MIL-STD-1916 or ASQ H1331 sampling procedures to validate product conformance before delivery, ensuring rigorous and standardized evaluation criteria are consistently applied. The inspection process is designed to support formal government acceptance by verifying that all items meet the highest quality benchmarks without exception. This subcontract is issued under the North American Industry Classification System code 541330 and is administered by the Defense Logistics Agency, a component of the Department of Defense. The work is performed directly at the contractor’s location, with no specified place of performance beyond the facility where manufacturing or assembly occurs. The solicitation was posted in mid-2026, indicating the anticipated timeframe for performance, and the contract is linked to official DLA award records through a specific procurement identifier. There is no set-aside classification indicated, meaning the contract is open to all eligible qualified vendors without restrictions based on small business or other categories.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Inspection and Quality Assurance ServicesThe contract mandates comprehensive incoming quality inspection activities to guarantee zero non-conformances prior to product delivery, strictly adhering to MIL-STD-105 and ASQ Z1.4 standards. These inspections are critical to ensuring that all materials and components meet the highest quality benchmarks required by the Defense Logistics Agency under the Department of Defense. The work is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is specifically tied to the contract number SPE7M526P4260. The performance location and contact details are not specified, but the work must be executed in alignment with federal defense quality protocols to facilitate seamless readiness and compliance. All activities are governed by rigorous inspection criteria designed to eliminate defective items before they progress to final delivery or integration.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Technical Data & Drawing Compliance SupportThe contract requires strict adherence to engineering drawings and their revisions, ensuring all manufactured parts and supporting documentation fully comply with technical specifications, including accurate interpretation of geometric dimensioning and tolerancing standards. Configuration management practices must be rigorously applied to maintain traceability and control over design changes throughout the production lifecycle. The work falls under NAICS code 541330 and is classified as a subcontract tied to the Department of Defense through the Defense Logistics Agency, with performance obligations aligned to defense-related manufacturing and technical documentation standards. The solicitation was posted in July 2026 and is linked to contract SPE4AX26DP001 with delivery order SPE4AX26F278E.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the execution of rigorous quality assurance and inspection services aligned with MIL-STD-1916 and ASQ Z1.4 standards, encompassing first article, in-process, and final inspections to ensure strict adherence to zero non-conformances for all critical attributes. Compliance with Defense Logistics Agency quality benchmarks is mandatory, mandating meticulous oversight throughout the entire production and verification lifecycle to safeguard product integrity and reliability. The work is performed as a subcontract under the NAICS code 541330, with the Department of Defense acting through the Defense Logistics Agency as the overseeing entity. Performance is expected to meet exacting military standards regardless of location, with no specific place of performance designated, reflecting the flexible yet highly controlled nature of the requirement. The solicitation, linked to contract SPE4AX26DP002 and delivery order SPE4AX26F292U, was posted in July 2026 indicating a projected start timeframe for the services.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

RFQ Floodplain, Hydraulic, and Regulatory Evaluation – Rio Grande Corridor Colombia Solidarity Bridge to South Laredo City Limits (approximately 41 miles)The City of Laredo is soliciting Statement of Qualifications from qualified firms to provide comprehensive professional services for evaluating floodplain conditions and potential impacts along a 41-mile stretch of the Rio Grande corridor between the Colombia Solidarity International Bridge and the southern city limits of Laredo, Texas. The required services include engineering, hydrologic and hydraulic analysis, geomorphologic assessment, surveying, environmental coordination, and regulatory support to ensure accurate characterization of flood risks and compliance with applicable standards. This initiative aims to support informed decision-making related to infrastructure planning, flood mitigation, and environmental stewardship in a high-priority geographic area. Proposals must be submitted by September 3, 2026, at 10:00 PM Central Time, under solicitation number FY26-ENG-54, which was posted on July 20, 2026. All submissions should be directed to the City of Laredo’s purchasing office, with primary points of contact being Lorena Lopez and Jaime Zapata, who can be reached via phone or email for inquiries. Additional administrative support is available through Francisco J. Mata and the central purchasing team. The work is to be performed within Texas, and firms are expected to demonstrate proven expertise in the specified technical disciplines, with an emphasis on experience with riverine systems and regulatory frameworks governing floodplain management in the region.

POSTED

about 5 hours ago

DEADLINE

in about 2 months

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for a range of major construction projects. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, supporting delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The goal is to ensure projects are executed on schedule, within budget, and to established quality standards. The contract is classified under NAICS code 541330 and is intended to support the Port’s infrastructure initiatives across its facilities. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The solicitation was posted on July 20, 2026, and while no specific set-aside details are provided, interested parties should review the official posting through the Port’s online portal for further instructions and submission requirements. No place of performance or organizational type is specified, indicating services may be rendered across multiple Port locations as needed.

Construction Management

POSTED

about 5 hours ago

DEADLINE

GOODNOW LIBRARY AND DEPARTMENT OF PUBLIC WORKS BUILDINGS HVAC DESIGN SERVICESThe contract seeks qualified engineering firms licensed in Massachusetts with proven experience in mechanical, electrical, and plumbing design for public buildings to provide HVAC design services for the replacement of rooftop equipment at the Goodnow Library and Department of Public Works buildings in Sudbury. The work requires technical expertise in designing systems that meet current codes and operational needs for municipal facilities, with a focus on efficiency, reliability, and integration into existing infrastructure. Firms must demonstrate capacity to handle public sector projects, including adherence to state and local regulations, coordination with facility staff, and delivery of comprehensive design documentation. Solicitation number BD-26-1331-FACIL-FACIL-131277 was posted on July 20, 2026, with responses due by August 14, 2026, at 5:00 PM. The procurement is managed by the Massachusetts Facilities Department through its Office of Facilities, with Lillian Vert listed as the primary point of contact. Services are to be performed entirely at the two facilities located at Old Lancaster Road in Sudbury, Massachusetts, 01776. All submissions must reflect the firm’s qualifications, relevant project experience, and ability to deliver timely, high-quality engineering design services for public infrastructure upgrades.

FACIL - Facilities Dept

POSTED

about 9 hours ago

DEADLINE

Quality Control (QC) Management ServicesThe contract titled Quality Control (QC) Management Services is a small business set-aside opportunity under the SBA’s Total Small Business Set-Aside program, with a NAICS code of 541330, indicating professional, scientific, and technical services. It requires the development and full implementation of a comprehensive quality control plan that defines specific work features and establishes structured control phases including preparatory, initial, and follow-up stages. The plan must incorporate rigorous testing protocols and a systematic method for tracking rework to ensure compliance and continuous improvement throughout the project lifecycle. Performance is to be carried out at Camp Lejeune, North Carolina, with a response deadline of August 20, 2026, and the solicitation was posted on July 20, 2026. The contracting entity is Navfacsyscom Mid-Atlantic under the Department of Defense, and the contract type is a subcontract.

Navfacsyscom Mid-Atlantic

POSTED

about 10 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SWITCH, RADIO FREQUEThis contract solicits two units of a radio frequency switch with part number 5985-01-463-5144, under solicitation SPE7M5-26-T-336M, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must meet or exceed the specifications of the cited technical data even if incomplete. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with designated verification levels or AQLs. The supplier must ensure all packaging complies with MIL-STD-2073-1E and MIL-STD-129, with special emphasis on ESD and EMI protection as mandated by MIL-PRF-81705, using only materials from qualified manufacturers listed on QPL-81705. ESD protection requires Type I barrier material and Type III wrap unless specified otherwise, and EMI protection requires Type I barrier material. Components with pins or leads must have adequate cushioning to prevent physical damage during handling and transport, and all packaging must be executed at approved ESD/EMI protective workstations. The item is subject to DOD Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and the supplier is responsible for adherence to DLA packaging requirements, including proper marking with special code 39 indicating ESD-sensitive electronic device status. Delivery is due in 157 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes specific transportation instructions per DLAD Proc Note C19 and C20, with a required delivery date of November 26, 2027, and a need ship date of January 5, 2027.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

COVER, ELECTRICAL COThe contract pertains to the procurement of 10 units of a COVER, ELECTRICAL CONNECTOR identified by NSN 5935-01-589-5332 and part number 923371, manufactured by ERNI COMPONENTS INC DBA 6V439. The item must be delivered within 20 days of contract award FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging and marking must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129, and Fed-Std-313, with non-hazardous items requiring commercial packaging per ASTM D3951 unless superseded by a更高 priority DLA requirement. Palletization must adhere to RP001, and each unit pack must reflect the specified QUP of 001. The delivery is directed to the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by DLAD Proc Notes C19 and C20. The item is marked for government use under the reference W81NMJ61920043, with an original required delivery date of July 16, 2026, and is issued under solicitation SPE7M5-26-T-336L. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract is assigned NAICS code 335931 with primary point of contact Margaret Smith from the Department of Defense’s Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThe contract pertains to the procurement of three digital microcircuits with NSN 5962-01-233-4079 under solicitation SPE7M5-26-T-336N, with a delivery schedule of 222 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is classified as qualified under FSC 5962 and must comply with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List as outlined in Procurement Note M01. Physical identification and marking of the bare item are required per RQ017, and packaging must adhere to DLA packaging standards. The contractor is obligated to retain complete supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016, ensuring end-to-end provenance throughout the supply chain. Government identification must be removed from any non-accepted supplies. The solicitation is open for responses until July 31, 2026, with the point of contact being Margaret Smith of the Department of Defense's Active Devices Division, based in Columbus, Ohio. The NAICS code 334413 indicates the procurement falls under semiconductor and related device manufacturing. An alternate offeror must submit a complete data package covering both the primary and alternate part specifications.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of 26 units of a linear microcircuit, identified by NSN 5962-01-051-2101, under solicitation SPE7M5-26-T-336S, which is a total small business set-aside with a NAICS code of 334413. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent quality, traceability, and packaging requirements mandated by the Defense Logistics Agency. All suppliers must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and must be qualified under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962. Traceability documentation must be meticulously maintained in accordance with DLA Directive Procurement Note C03 and submitted via the DLA Land and Maritime Form 918, which must be emailed to the contract administrator at least 15 days prior to delivery with all attachments compressed to under 15 MB and properly labeled. Shipment is prohibited until explicit written authorization is received, and failure to comply with documentation accuracy or timing voids payment eligibility. The contractor must also adhere to physical marking requirements per IPC/JEDEC J-STD-609 for lead finish identification on each unit pack, and conform to DLA packaging standards and bare item marking specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Any disclosure to foreign nationals, regardless of location, is prohibited without authorization. The government will not accept surplus material, and all deliveries must be made to Columbus, Ohio within 221 days of award. Primary point of contact for inquiries is Cindy McAninch of the Department of Defense’s Active Devices Division, with all submissions and communications routed through the designated DLA systems and protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

FILTER, RADIO FREQUEThis contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract is for a single unit of a connector, receptacle, identified by NSN 5935-01-376-1977, under purchase request 7017539670, with delivery required within 20 days after award. It is issued under solicitation number SPE7M5-26-T-336K, posted on July 20, 2026, with responses due by July 31, 2026. The procurement falls under NAICS code 334417 and is managed by the Active Devices Division of the Department of Defense, with performance located in Martinsburg, West Virginia, zip code 25405-7704. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contractor must comply with DLA packaging requirements and adhere to physical identification and bare item marking standards. Government identification must be removed from non-accepted supplies. The offeror is required to provide a complete data package for both the approved and alternate part, as no data is currently available. Primary point of contact is Margaret Smith, reachable via email and phone provided.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

LIGHT EMITTING DIODThis contract specifies the procurement of a light emitting diode item identified by part number 81000-44019 from KOITO MFG CO. LTD, with the NSN 5980-01-652-7500, under solicitation SPE7M5-26-T-336Q. The item is classified as a critical application item and must comply with stringent military and federal standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Full supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the item requires Federal Aviation Administration airworthiness approval. Packaging and preservation must follow DLA-specific requirements, including dry packaging methods and E5 unit containers, with no special marking applied. The delivery is FOB origin, to be inspected and accepted at destination, with a fixed quantity of 7 units and zero tolerance for variance. The required delivery date is January 3, 2027, with a 157-day allowable delivery window. All manufacturing and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sampling unless otherwise directed. Critical attributes are assigned verification level VII and an AQL of 0.1, major attributes level IV and AQL 1.0, and minor attributes level II and AQL 4.0. The item is subject to FAA bare item marking requirements and the contractor must remove any government identification from non-accepted supplies. The unit price is $7.00, with a total contract value of $49.00. Delivery instructions direct shipment to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract was posted on July 20, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense’s Active Devices Division with primary point of contact Margaret Smith.

Metal Window and Door Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR BODY, RECEPTAThe contract pertains to the procurement of 18 electrical connector bodies, receptacles, identified by NSN 5935-01-323-6812, under solicitation SPE7M5-26-Q-0741, with a firm fixed price and no allowable variance in quantity. Delivery is required within 90 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with specification A-A-55463A Revision A, Gen 4, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicitly approved in writing by the contracting officer, except for commercial items as defined in FAR 11.001 or part-numbered-only items. Packaging and handling instructions specify the use of preservative methods, materials, and unit containers as outlined in the documented standards. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must follow DLAD Proc Note C19 and C20. All technical and quality requirements are incorporated by reference from the DLA Master List, with compliance based on the revision in effect at the solicitation issue date. The procurement is open to full and open competition, and the contract includes strict requirements for the removal of government identification from non-accepted supplies and physical identification of bare items.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

BACKSHELL, ELECTRICAThe contract specifies the procurement of 14 units of a backsHELL, ELECTRICA with NSN 5935-01-244-6487 under solicitation SPE7M5-26-Q-0742, requiring firm fixed pricing with no variance in quantity. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including compliance with SAE-AS85049C and MIL-C-85049A specifications, and is subject to qualification under the Qualified Products List for connector assemblies. The use of ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without written approval from the contracting officer, and this restriction overrides all other specifications unless exempted for commercial items or part-numbered-only items. The item must be packaged in accordance with DLA Packaging Requirements, MIL-STD-129 labeling, and ASTM D3951 for non-hazardous materials, with all packaging and palletization adhering to RP001 guidelines. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania within 143 days after order date, with inspection and acceptance occurring at destination. The unit of issue is each, and transportation details follow DLAD procedural notes C19 and C20. The contract requires full and open competition, with no set-aside provisions, and the point of contact is Barbara Hoffmann of the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

ELECTRON TUBEThe contract specifies the procurement of 13 electron tubes, specifically cathode ray tubes, identified by part number A06A0788-12 and NSN 5960-00-553-5792, under solicitation SPE7M5-26-Q-0737. Delivery is required within 354 days of award, with performance taking place at Robins Air Force Base, Georgia. The item is designated as covered defense information, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date. The procurement is subject to stringent configuration control through Engineering Change Proposal and variance request processes, and inspection and acceptance must occur at the origin of supply. Government identification must be removed from any non-accepted items, and the associated technical data is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. The responsible office is the Department of Defense’s Active Devices Division, with Harold Campbell listed as the primary point of contact.

Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

CAPACITOR, FIXED, MICThis contract specifies the procurement of a fixed micro capacitor under NSN 5910-01-208-6473, with a requirement for 72 units to be delivered within 89 days from the contract award, FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All packaging and preservation must conform to SPE7M5-26-T-336R, Section B, and MIL-DTL-39028 for capacitors. The contractor must apply specific lead finish markings per IPC/JEDEC J-STD-609 on each unit package, clearly identifying lead content, and must avoid all Class I ozone-depleting substances in manufacturing unless written approval is obtained from the contracting officer. Acceptance testing follows Army Drawing 18876-11436863, with waiver of paragraph 6 permitted only for previously accepted manufacturers, though DSCC retains the right to reinstate requirements at any time. Sampling procedures require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise directed, with unspecified attributes considered major. The contract prohibits any variance without formal request and mandates removal of government identification from non-accepted items. Delivery is directed to DLA Distribution at New Cumberland, PA, with required ship date set for October 29, 2026. Unit price is $72.00 per unit, totaling $5,184.00, and all data aligns with the solicitation SPE7M5-26-T-336R issued by the Department of Defense’s Active Devices Division.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cybersecurity Compliance & CUI Safeguarding (NIST SP 800-171)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity safeguards for Controlled Unclassified Information. This subcontract is under the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, and is subject to the NAICS code 541512, indicating it relates to computer systems design services. Compliance is mandatory and must be sustained throughout the contract lifecycle to meet federal cybersecurity standards for handling sensitive defense data. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring timely submission of proposals demonstrating capability to meet all NIST SP 800-171 requirements. Contractors must be prepared to demonstrate full adherence to the 110 security controls across 14 families, including access control, audit, configuration management, and incident response, and must maintain continuous compliance through documentation, assessments, and reporting. Failure to meet these standards could result in contract termination or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

DEADLINE