Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Quality assurance and inspection services are being procured under a total small business set-aside contract, with inspections required at three critical levels: Critical VII, Major IV, and Minor II, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Sampling must be conducted using either MIL-STD-1916 or ASQ H1331 standards with a strict zero-defect acceptance criterion, ensuring all delivered products meet the highest quality benchmarks. The solicitation, issued by the Strategic Acq Program Directorate under the Department of Defense, falls under NAICS code 541330 and is structured as a subcontract opportunity, open for response until August 6, 2026. Performance location and point of contact details are not specified, but the requirement is focused on rigorous quality control procedures aligned with military and industry-standard sampling practices.

General Info

Quality inspection services for DoD under zero-defect standards, MIL-STD-1916 or ASQ H1331, AQLs 0.1/1.0/4.0, small business set-aside.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quality inspections at Critical (VII), Major (IV), and Minor (II) levels with AQLs of 0.1, 1.0, and 4.0 using MIL-STD-1916 or ASQ H1331 sampling with zero-defect acceptance.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery Indefinite Quantity (IDIQ) contract for its major construction initiatives. These services span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on supporting delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery strategies. Contractors will be expected to ensure projects meet defined schedules, budgets, and quality standards while assisting the Port in achieving its infrastructure objectives. The contract is classified under NAICS code 541330 and is open to firms capable of delivering high-level construction management expertise across a diverse portfolio of port-related developments. The primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 23, 2026, and interested parties can access further details through the Port’s official portal. While no set-aside type has been specified, the opportunity is targeted at firms with demonstrated experience in managing complex public infrastructure projects.

Construction Management

POSTED

about 4 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment. Efforts will center on diagnosing and resolving system inefficiencies to enhance performance, energy efficiency, occupant comfort, reliability, and equipment longevity while ensuring strict compliance with safety and regulatory mandates. Scope includes assessment and optimization of mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems, with work initiated and directed through formal Service Directives issued by Aviation Facilities and Infrastructure. Collaboration with AV/F&I is mandatory to meet all project objectives and deliverables. The contract is structured as an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330 with the Port of Seattle as the contracting agency. Primary point of contact is Jason Gates, reachable via phone or email, with Jim Farris serving as the project manager. The solicitation was posted on July 23, 2026, and all work will be performed at the airport. No set-aside designation has been specified, and the contract will be managed through the Port of Seattle’s procurement portal.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-TPA-Streetcar PMCThe contract anticipates support for Streetcar 2.0 and its integration with connectivity infrastructure at RFK, focusing on planning, coordination, and implementation efforts to enhance public transit functionality in the District of Columbia. This forecasted procurement under the Department of Transportation (DDOT) is positioned for fiscal year 2026 and is intended to secure services that ensure seamless operational alignment between the expanded streetcar system and key transit hubs, particularly around the RFK site. The effort will likely involve technical oversight, system compatibility testing, and coordination with regional mobility initiatives to improve transit accessibility and efficiency. While specific financial details, timelines, or vendor requirements are not yet defined due to the forecast nature of the posting, the initiative signals a commitment to advancing sustainable urban transportation by expanding the streetcar network and linking it to major transportation nodes. The work will be performed within the District of Columbia, and while no set-aside provisions or NAICS codes are specified, the procurement is expected to involve specialized contractors with expertise in transit infrastructure, signal integration, and systems engineering. Stakeholder engagement and compliance with local transit goals will be critical components as the project moves from forecast to active solicitation.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26 -DOEE-WPD-Automated Rain Barrel ProtypeThe District of Columbia’s Department of Energy and Environment is forecasting a contract opportunity to design, build, and test a prototype automated rain barrel system that will discharge collected stormwater automatically prior to an anticipated storm. The goal is to create a smart, residential-scale solution that increases the capacity of rain barrels to capture more runoff during heavy rainfall events by preemptively emptying them, thereby enhancing stormwater management and reducing urban flooding. The prototype must be reliable, user-friendly, and suitable for widespread residential deployment, incorporating sensors or weather data integration to trigger discharge cycles based on forecasted precipitation. The project is part of FY26 planning under the DOEE’s Water and Pollution Division and is intended to support broader environmental resilience initiatives in the District. While specific funding details, timeline, and technical requirements have not yet been released, the solicitation is anticipated to seek proposals from innovators with expertise in IoT devices, hydrology systems, and environmental engineering. The prototype will be evaluated on functionality, durability, scalability, and potential for integration with municipal weather monitoring systems. Performance validation will include real-world testing under simulated storm conditions to ensure the system consistently and safely empties the barrel before rain arrives without causing overflow or infrastructure stress.

Energy and Environment (DOEE)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-IPMA-Rehabilitation of the Mall Tunnel (TN#1142)The contract pertains to the preliminary engineering design phase, accounting for 30 percent of the total work, for the rehabilitation and repair of the Mall Tunnel designated as TN#1142 in Washington D.C. This phase is grounded in the findings of an inspection conducted between April 7 and April 24, 2024, which provided specific recommendations for addressing the tunnel’s structural and operational deficiencies. The design work will translate those inspection results into actionable engineering plans to prepare for full-scale rehabilitation efforts. The contract is listed under the District of Columbia Department of Transportation’s forecast for fiscal year 2026, with a posted date of July 23, 2026, indicating it is an anticipated procurement rather than an active solicitation. No solicitation number, set-aside details, or NAICS code are currently provided, and the place of performance is associated with the tunnel’s location in the District of Columbia, though specific address details are not listed. The procurement is managed by the District’s transportation agency with no publicly identified point of contact.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-TBSA-Work Zone Design and Work Zone Safety Transportation Management ProgramThe District of Columbia Department of Transportation is forecasting a contract for the FY26 Work Zone Design and Work Zone Safety Transportation Management Program, aiming to enhance the safety and efficiency of work zones across the city’s transportation infrastructure. This initiative will focus on developing and implementing comprehensive design standards and management strategies that minimize disruptions, protect workers and the public, and ensure seamless traffic flow during construction and maintenance activities. The program is expected to involve advanced planning, engineering expertise, and coordination with multiple stakeholders to align with evolving safety regulations and industry best practices. Although specific details such as funding amounts, contract duration, and selection criteria are not yet finalized, the solicitation is positioned as a forecast with a posted date of July 23, 2026, indicating it is a precursor to a formal procurement process. The work will be performed within the jurisdiction of the District of Columbia, with performance location and other administrative specifics yet to be determined. Interested parties should monitor official channels for the upcoming formal solicitation, as this forecast signals the agency’s intent to secure qualified contractors with specialized experience in transportation management systems, work zone safety protocols, and intelligent infrastructure design.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26-DOEE-WPD-Large Scale End-of-Pipe Stormwater ProjectThe District of Columbia’s Energy and Environment Agency is forecasting a contract for the feasibility study and design of a large-scale end-of-pipe stormwater project scheduled for fiscal year 2026. This initiative aims to address stormwater management through engineered solutions at critical discharge points, likely targeting urban runoff reduction, water quality improvement, and compliance with environmental regulations. The project will require detailed planning, technical analysis, and design development to ensure scalability, environmental suitability, and long-term operational effectiveness. Although no solicitation number or NAICS code has been provided yet, the forecast indicates the agency is preparing for a formal procurement process that will seek qualified contractors with expertise in civil engineering, hydrological modeling, and stormwater infrastructure. The place of performance is in the District of Columbia, with work expected to focus on specific end-of-pipe locations requiring intervention. The posting date reflects an early-stage forecast, allowing potential bidders time to review requirements and prepare proposals ahead of an anticipated solicitation. All further details including submission guidelines, evaluation criteria, and deadlines will be released through an official solicitation.

Energy and Environment (DOEE)

POSTED

about 4 hours ago

DEADLINE

FY26-DOEE-WPD-Kenilworth Park Wetland Restoration EA/DesignThe contract pertains to environmental assessment and design services for wetland restoration projects within Kenilworth Park in the Anacostia watershed, scheduled for fiscal year 2026 under the District of Columbia’s Department of Energy and Environment. The work will focus on planning and engineering activities necessary to restore and enhance the ecological function of the wetland areas, addressing habitat degradation, water quality, and natural resource conservation. The project is a forward-looking forecast, indicating future procurement activity, with no solicitation number yet assigned and no set-aside provisions specified, suggesting open competition for qualified firms with expertise in environmental engineering and ecological restoration. The location of performance is tied to Kenilworth Park in the District of Columbia, though precise address details are not provided in the posting. The agency responsible is the District of Columbia’s Energy and Environment (DOEE), which seeks to advance regional environmental resilience through this initiative. No point of contact information is listed, and the notice was posted on July 23, 2026, with an official link directing interested parties to the District’s contracting portal for updates. This forecast serves as an early indicator for potential bidders to prepare proposals aligned with regulatory requirements and ecological restoration best practices for federally and locally significant wetland systems.

Energy and Environment (DOEE)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-TSA-Traffic Signal System Modernization System Management (Engineering Services)The District of Columbia Department of Transportation is planning a comprehensive modernization of its traffic signal infrastructure through a citywide deployment of advanced traffic signal controllers and a new central management system. This initiative aims to replace all existing legacy controllers with next-generation hardware capable of integrating emerging transportation technologies to enhance traffic flow, reduce congestion, and improve safety for all road users including pedestrians, cyclists, and public transit. The project encompasses both hardware upgrades and the implementation of a centralized software platform to monitor, manage, and optimize signal timing dynamically across the entire city network, increasing operational efficiency and infrastructure return on investment. Engineering services will be required to support the design, integration, testing, and deployment of this modernized system, ensuring seamless interoperability with existing transportation networks and future-proofing the city’s traffic management capabilities. The effort is scoped to deliver comprehensive improvements in multimodal mobility, with a focus on reducing delays, lowering emissions, and supporting equitable access to transportation. While specific procurement details such as set-aside status or NAICS code are not yet defined, the forecasted contract is anticipated to trigger formal bidding in FY26, with work performed citywide under the oversight of DDOT.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-TPA-Ped/bike Connection Across I-295/CSX Corridor Along East Capitol St. Alignment ProjectThe District of Columbia Department of Transportation is forecasting a feasibility study for a pedestrian and bicycle connection across the I-295 and CSX rail corridor along East Capitol Street. This project aims to evaluate viable alignment options to safely link communities on either side of the highway and rail line, enhancing nonmotorized transportation options and improving regional connectivity. The study will assess engineering, environmental, and community impacts to determine the most practical and beneficial design approach for a future multimodal crossing. The contract is scheduled for release in fiscal year 2026 and is managed under DDOT’s Transportation Planning and Analysis division. No solicitation number or set-aside details are provided at this stage, and the forecast is intended to give potential contractors and stakeholders advance notice to prepare proposals. The place of performance is expected to be within the District of Columbia, focused on the East Capitol Street corridor, with no specific office address or point of contact listed yet. The forecast provides a general timeline and scope to encourage early engagement and planning in advance of formal procurement.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-IPMA-Metropolitan Branch Trail - Blair Rd to Piney Branch Rd NWThe contract involves the construction engineering design for a multi-use trail extending from Blair Road and Aspen Street NW at the southern end to the intersection of Piney Branch Road and Eastern Avenue NW at the northern end, completing a critical connection between two existing segments of the Metropolitan Branch Trail along its western alignment as outlined in the Concept Plan. The scope encompasses comprehensive project management, coordination with multiple agencies, extensive public involvement efforts, and a full suite of technical services including surveying, mapping, right of way acquisition, traffic and utility analyses, geotechnical investigations, and detailed trail and structural design. Additional deliverables include storm drainage and stormwater management systems, sediment control measures, temporary traffic control plans, signing and pavement markings, lighting design, traffic engineering solutions, landscaping, and the preparation of full construction cost estimates, specifications, and quality assurance and quality control protocols to ensure compliance and durability.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

FY26-DDOT-IPMA-Scour Prevention for New York Ave BridgeThe District of Columbia Department of Transportation is forecasting a sole-source contract for the role of Engineer-of-Record to provide design support during construction of scour prevention measures for the New York Avenue Bridge. This contract, identified under FY26-DDOT-IPMA, is planned for the fiscal year 2026 with a posted date of July 23, 2026, and will be awarded to a single design firm with the expertise to ensure structural integrity and compliance during the construction phase. The scope involves specialized engineering oversight focused on mitigating erosion around bridge foundations, requiring deep technical knowledge of hydraulic systems, soil dynamics, and bridge infrastructure. The place of performance is in the District of Columbia, though specific address details are not provided, and the contract will be executed under the jurisdiction of DDOT without competitive bidding due to its sole-source nature. No NAICS code, set-aside classification, or point of contact information is included in the forecast.

Transportation (DDOT)

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Cybersecurity Compliance and CUI SafeguardingThe contract requires full implementation of NIST SP 800-171 controls to protect covered defense information and ensure compliance with federal cybersecurity standards. Performance includes conducting thorough self-assessments to verify adherence to these controls and meeting all DFARS requirements for reporting cyber incidents in a timely and accurate manner. The work is scoped under a Small Business Set-Aside, specifically designated for total small business participation, and aligns with NAICS code 541512 for computer systems design services. The contract is structured as a subcontract under the Department of Defense’s Strategic Acquisition Program Directorate, with responses due by August 6, 2026, and a posted date of July 22, 2026. Place of performance and specific office details are not provided, but work is expected to be conducted in support of defense-related cybersecurity obligations.

Computer Systems Design Services

POSTED

DEADLINE

Military-Compliant Marking, Labeling, and BarcodingThis contract requires the application of military-compliant marking and labeling standards per MIL-STD-129, including the use of Data Matrix or Code 128 barcodes and bare format labeling, with all government identifiers removed prior to delivery. The work must ensure full adherence to DoD requirements for identification and traceability while eliminating any markings that reference government ownership or sourcing. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 561910 for other support activities. The opportunity was posted on July 22, 2026, with a response deadline of August 6, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance location and specific delivery details are not specified in the provided data, but compliance with the marking and labeling standards is mandatory for award consideration.

Packaging and Labeling Services

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive cleaning, drying, packaging, and palletization services strictly aligned with MIL-STD-2073-1E and DLA RP001 standards, ensuring all military-grade items are preserved and packaged to federal specifications. Preservation method 33 must be utilized for long-term protection against corrosion and environmental degradation, with container type E5 mandated for secure, standardized storage and transport. All work must adhere to rigorous quality control protocols to maintain readiness and compatibility with military logistics systems. The scope demands full compliance with defense packaging requirements, leaving no room for deviation in material selection, process execution, or documentation. This is a small business set-aside subcontract under the SBA program, reserved exclusively for small businesses as defined by the Federal Acquisition Regulation. The NAICS code 561910 indicates the services fall under other support activities for air transportation and related logistics support, positioning the contract within specialized military logistics services. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The place of performance and point of contact details are not specified, but the contract must be executed in alignment with DoD operational requirements, and interested parties must access the full details through the provided DIBBS portal link.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Mechanical Component ManufacturingThe contract calls for the manufacture and supply of a gear and shaft assembly identified by NSN 3020017029235, adhering strictly to military specifications throughout all phases including precision machining, component assembly, rigorous quality control, and secure packaging. All work must comply with defense industry standards to ensure reliability and performance under operational conditions, with each unit subjected to thorough inspection and documentation to validate conformance. The effort is scoped as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 332996 for other fabricated metal product manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The performance location and point of contact details are not specified, but all deliverables must be ready for military logistics handling and final distribution as required.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Loop Clamp (NSN 5340-01-112-7793) Supply and DeliveryThe contract requires the manufacture, packaging, labeling, and delivery of 208 units of Loop Clamp designated by NSN 5340-01-112-7793 to various locations within the United States, with work to be performed in response to specific delivery orders. All aspects of production and logistics must adhere to military packaging and marking specifications, as well as mandatory cybersecurity standards to ensure the integrity and security of the supplied items. The requirement is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, in accordance with FAR 19.5, and is classified under NAICS code 332510 for Fabricated Metal Product Manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is issued through the Department of Defense’s Strategic Acquisition Program Directorate. The performance location spans multiple U.S. destinations as dictated by delivery orders, and the contracting activity is managed via the DIBBS platform under reference number SPE7LX26U8925.

Hardware Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance Support (NIST SP 800-171)The contract seeks support for achieving and maintaining compliance with NIST SP 800-171 standards to safeguard covered defense information in alignment with DFARS requirements. This includes conducting comprehensive cybersecurity assessments, developing and managing Plans of Action and Milestones to address identified gaps, and producing thorough documentation to demonstrate ongoing compliance. The work is critical to ensuring that covered defense information is protected against unauthorized access, disclosure, or compromise throughout the contractor’s systems and processes. This subcontract is a Total Small Business Set-Aside under SBA regulations, reserved exclusively for small businesses as defined by the NAICS code 541512, which pertains to computer systems design and related services. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026. The contracting activity is led by the Strategic Acquisition Program Directorate within the Department of Defense, and performance is expected to support federal defense objectives, though the specific place of performance is not designated. All work must adhere strictly to the outlined compliance framework and deliverables to meet regulatory and contractual obligations.

Computer Systems Design Services

POSTED

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThe contract requires full compliance with MIL-STD-129 for packaging military shipments, ensuring all items are properly marked with U/I and QUP codes as mandated for identification and logistics tracking. In parallel, all hazard communication must adhere to OSHA 29 CFR 1910.1200 standards, requiring accurate and legible labeling of hazardous materials to ensure safety during handling, storage, and transportation. The packaging and labeling processes must be executed with precision to meet rigorous defense logistics requirements, with no deviations permitted in marking formats, material specifications, or compliance documentation. This is a total small business set-aside under the SBA program, classified under NAICS code 561910 for other support activities, and is issued by the Strategic Acquisition Program Directorate within the Department of Defense. Respondents must submit proposals by the deadline of August 6, 2026, and the work must be performed to support military supply chain operations without specifying a single location, implying potential multiple or flexible performance sites. All submissions must demonstrate clear capability to consistently deliver compliant packaging and hazard labeling services across the full scope of military shipping requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Machined Flat Washer SupplyThe contract entails the manufacture and supply of 145 precision flat washers identified by NSN 5310-01-518-5068 and part number 23-10900-226, with strict adherence to DLA quality standards and a zero-defect acceptance criterion. All units must meet exacting specifications to ensure reliability and performance in defense applications. This subcontract is a Total Small Business Set-Aside under the SBA program, reserving the opportunity exclusively for small businesses as defined by FAR 19.5, and is classified under NAICS code 332722 for Machine Shop, Turned Product, and Screw, Nut, and Bolt Manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance of the work is not tied to a specific geographic location, and the contract is accessible through the DIBBS system for authorized participants.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Palletization and Unit Load AssemblyThe contract mandates the assembly of packaged fenders onto pallets in strict accordance with DLA RP001 standards to ensure compliance with military logistics handling protocols and load stability requirements. This work is critical to supporting defense supply chain operations, where properly configured unit loads are essential for safe, efficient transport and storage within military environments. The task involves precise pallet configuration, secure packaging, and adherence to standardized procedures governing weight distribution, securing methods, and labeling to meet Department of Defense specifications. The solicitation is classified as a subcontract under NAICS code 561910, indicating it pertains to other support activities for material handling. It was posted on July 22, 2026, with a response deadline of August 6, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The place of performance and point of contact details are unspecified, but all work must be completed to fulfill military logistical needs without deviation from the referenced DLA standard. Bidders must ensure full technical and procedural alignment with RP001 to be considered for award.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full compliance with hazardous materials regulations for shipments, requiring the accurate preparation of Material Safety Data Sheets and the application of labels that meet OSHA standards. This subcontract is aimed at supporting the Department of Defense’s Strategic Acquisition Program Directorate by maintaining regulatory adherence across all stages of hazardous material handling and transport, with performance tied to federal safety requirements. The solicitation is open for responses until August 6, 2026, and falls under the NAICS code 541620, indicating professional, scientific, and technical services related to environmental and safety compliance. There is no set-aside designation, and while specific location details are not provided, the work is expected to support DoD logistics operations globally.

Environmental Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and containerization services for vehicular fenders in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring that all items are protected against environmental degradation and remain mission-ready throughout storage and transit. Services must adhere to strict military specifications for material selection, labeling, sealing, and internal packaging methods to maintain long-term integrity under diverse operational conditions. The work is classified as a subcontract under NAICS code 424910 and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Proposals must be submitted by August 6, 2026, with the solicitation posted on July 22, 2026, and all performance activities are expected to align with federal procurement guidelines. The place of performance and exact delivery locations are not specified, indicating flexibility in logistics planning, though all containerized shipments must ultimately support Department of Defense supply chain requirements. Compliance with DLA’s procedural directives and verification of packaging certification will be essential to meeting contract obligations and securing payment.

Farm Supplies Merchant Wholesalers

POSTED

DEADLINE

Vehicular Fender Manufacturing and SupplyThe contract calls for the manufacture and supply of vehicular fenders identified by NSN 2510016059192, ensuring full compliance with military specifications for form, fit, and function to meet operational requirements. This is a subcontract issuance under the Department of Defense’s Strategic Acquisition Program Directorate, with performance expected to align with defense-grade standards for durability, compatibility, and reliability in field conditions. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026, indicating a limited window for qualified manufacturers to submit proposals. The North American Industry Classification System code 336370 confirms the scope pertains to motor vehicle body and trailer manufacturing, emphasizing specialized production capabilities are required. Although the place of performance and point of contact details are not provided, the contract is accessible through the DIBBS platform for registered participants seeking to fulfill this defense procurement need.

Motor Vehicle Metal Stamping

POSTED

DEADLINE