Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the provision of quality assurance and inspection services to ensure that all deliverables meet required military and industry standards, specifically using MIL-STD-1916 or ASQ H1331 sampling plans to verify conformance. Inspections must be conducted with precision to support formal government acceptance of products, ensuring that every lot or batch complies with defined quality thresholds before release. The work is tied directly to the delivery of goods or components intended for military use, requiring strict adherence to documented inspection protocols and thorough documentation of results. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically quality control and testing services. It is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. Interested parties must submit responses by the deadline of August 11, 2026, following the solicitation posted on August 3, 2026. The contract does not include set-aside classifications and is accessible through the DIBBS system for further details and submission procedures.

General Info

Quality assurance and inspection services for military deliverables using MIL-STD-1916 or ASQ H1331 in New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quality inspections using MIL-STD-1916 or ASQ H1331 sampling plans to verify conformance and support government acceptance of deliverables.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Structural Engineering Design for Marine Davit InstallationThe contract requires comprehensive structural engineering design services for the installation of a Viking Norsafe E-60 Conventional Lifeboat Davit at Pier 7, encompassing all phases from load analysis and foundation evaluation to reinforcement design and final documentation. The engineering deliverables must include stamped drawings and a detailed bill of materials, ensuring compliance with applicable structural and marine safety standards. The scope demands precise analysis of existing pier conditions to confirm structural integrity and determine necessary modifications to safely support the davit system under operational and environmental loads. This is a subcontract opportunity classified under NAICS code 541330 for engineering services, reserved exclusively for small business categories including SBA-certified small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, and is administered by Tongue Point Job Corps, though no physical address or point of contact details are provided. The work is to be performed at Pier 7, with all deliverables subject to approval and alignment with the client’s operational and safety protocols for marine infrastructure.

Tongue Point Job Corps

POSTED

about 9 hours ago

DEADLINE

System Testing, Commissioning, and DocumentationThe contract requires the performance of NFPA 72-compliant testing, commissioning, and detailed documentation for fire alarm and detection systems, ensuring all components meet applicable fire safety standards. A Record of Completion must be submitted as part of the deliverables to certify that all system functions have been properly verified and documented in accordance with regulatory requirements. The work is to be conducted at the Earle C. Clements Job Corps Center, though specific location details are not provided, and the project supports critical life safety infrastructure for the facility. This is a subcontract opportunity reserved exclusively for small business categories under SBA set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code 541330 indicates the work falls under engineering services, and the response deadline is August 10, 2026, with the solicitation posted on August 4, 2026. The opportunity is accessible via the SBA’s online portal for federal contracting opportunities.

Earle C. Clements Job Corps Center

POSTED

about 9 hours ago

DEADLINE

Testing, Adjusting, and Balancing (TAB) ServicesThe contract requires the performance of Testing, Adjusting, and Balancing (TAB) services on existing hot water circulation pumps to ensure they operate in alignment with the system’s design specifications. This work is critical to optimizing heating efficiency, maintaining proper flow rates, and ensuring system reliability across the facility. The task involves comprehensive diagnostic evaluation, calibration, and fine-tuning of the pumps to meet established performance benchmarks, with adjustments made to accommodate the building’s hydraulic and thermal load requirements. The contract is classified as a subcontract under the SBA’s small business set-aside programs, which include eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It falls under NAICS code 541330 for Engineering Services and is issued by Serrato Corporation DBA Flint Hills Job Corps. Respondents must submit proposals by the deadline of August 13, 2026, though no specific location for performance is provided in the data, and no point of contact details are available. The posting date indicates this opportunity was made public on August 4, 2026, and the solicitation link directs to a federal opportunity portal for further administrative details.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 9 hours ago

DEADLINE

Factory-Certified Boiler Start-Up and CommissioningThe contract requires factory-certified start-up and commissioning of boiler control systems, encompassing circulation pumps, sensors, and reset controls, ensuring full operational compliance with manufacturer standards. All work must be performed by certified technicians authorized by the boiler equipment manufacturer to validate system integrity and performance post-installation. This is a subcontract under a small business set-aside designation, open to SBA-recognized categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541330 categorizes this as professional, scientific, and technical services related to engineering. The solicitation was posted on August 4, 2026, with a response deadline of August 13, 2026, and the performance location is managed by Serrato Corporation DBA Flint Hills Job Corps, though specific site details are not provided.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 9 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California. The project requires professional services such as engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, with a focus on engaging disadvantaged, small, women-owned, minority-owned, and veteran-owned businesses. The solicitation prioritizes participants certified under various set-aside programs including DBE, SBE, WBE, MBE, SDB, WOSB, VOSB, and SDVOSB, aligned with SBA and Department of Transportation guidelines. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 PM PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at charles.brown@ghd.com, and the NAICS code associated with the work is 541330 for architectural and engineering services.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

This contract is a fee-for-service solicitation issued by Management & Training Corporation (MTC) on behalf of the Tongue Point Job Corps Center in Astoria, Oregon, for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7. The scope of work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials to support the installation, with deliverables including electronic PDF copies and one full-size printed drawing set. The contract is classified under NAICS code 541330 for Engineering Services with a size standard of $9 million and is set aside exclusively for small business, small disadvantaged business, women-owned small business, HUBZone small business, veteran-owned small business, and service-disabled veteran-owned small business concerns. All subcontractors must self-certify their business category, possess a Unique Entity Identifier (UEI), provide a valid Taxpayer Identification Number, and disclose debarment status if their subcontract exceeds $30,000. The contractor must comply with Service Contract Labor Standards, pay at least the federal contractor minimum wage as mandated by Executive Order 13658, and adhere to Wage Determination SCA WD 2015-5577 Rev. 28. The contract includes stringent data protection obligations requiring compliance with DOL and federal data privacy guidelines, including encryption of personally identifiable information, reporting of any breach to the Department of Labor within one hour of discovery, and a prohibition on retaining or disseminating any deliverables containing Privacy Act or FOIA-exempt data. The contractor is required to submit proposals via email to Elizabeth Williamson at Williamson.elizabeth@jobcorps.org by 2:00 PM PST on August 6, 2024, and must include a completed bid sheet, W-9 form, self-certification form, and acceptance of MTC’s terms and conditions. Invoices must be submitted to MTC’s corporate office in Centerville, Utah, and must contain the purchase order number, dates of service, itemized pricing with extended unit rates and totals, and invoice number and date. Payment is conditioned upon delivery and acceptance of services. The contractor must also indemnify MTC against all claims arising from their performance, negligence, or breach of contract, though insurance is not required for this project. Termination is permitted by either party with thirty days’ written notice, or immediately if funding is withdrawn.

Tongue Point Job Corps

POSTED

about 9 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves replacing an existing groundwater production well with a new 24-inch diameter stainless steel Ful-Flo louvered well screen, matching existing vertical turbine equipment and integrating discharge piping into the Corydon Blend station and Malaga blending location, in full compliance with AWWA, SWRCB, DWR, and EVMWD standards. Services encompass structural, geotechnical, architectural, noise, survey, corrosion, and potholing engineering, delivered in two distinct phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and well abandonment, bid assistance, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, mechanical, electrical, instrumentation, and controls design for equipment, testing, and commissioning. The contract requires submission of a detailed cost proposal broken down by task, with total estimated project costs at $2,260,788 including $2 million in construction costs and a negotiable not-to-exceed professional services fee. Proposals must adhere to strict format requirements, including a cover letter, demonstrable project experience, resumes of primary staff and subconsultants, three references, and a comprehensive scope of work. Key attachments include Exhibit B for the Schedule of Services, Exhibit C for compensation rates, and Attachment 2 which mandates completion of certifications for American Iron and Steel compliance, lobbying, debarment/suspension, SAM information, DBE subconsultant disclosures, Executive Order N-6-22, conflict of interest, insurance acknowledgment, and public works registration. All proposers must be certified DBEs and submit comprehensive data on any DBE subconsultants used, including certification numbers and justifications for non-selection. The evaluation process prioritizes relevant qualifications and experience (25%), followed by understanding of the project and technical approach (25%), scope and schedule (20%), innovation (10%), cost and value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest cost. Mandatory compliance requirements include adherence to the Build America Buy America Act, prohibition of covered telecommunications equipment from Huawei or ZTE, sanctions compliance under Executive Order N-6-22

Ardurra Group, Inc.

POSTED

about 9 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction to replace an existing water well in Lake Elsinore, Riverside County, California. The contract, identified as C2305, is solicited by AKM Consulting Engineers and is classified under NAICS code 541330 for architectural and engineering services. The project emphasizes the involvement of Disadvantaged Business Enterprises as part of a transportation department set-aside, encouraging participation from underrepresented firms. Key deliverables include comprehensive design work, assistance with the procurement and bidding process, and ongoing engineering oversight throughout construction to ensure compliance, quality control, and timely completion. The official response deadline is September 1, 2026, with primary point of contact being Katie Neubauer of AKM Consulting Engineers, reachable via phone or email for inquiries. All project details and opportunities are accessible through the SBA’s opportunity portal.

AKM Consulting Engineers

POSTED

about 9 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The project is divided into two phases: Phase 1 focuses on the design of the new well and abandonment of the old one according to Riverside County and California State Water Resources Control Board standards, including technical specifications, civil site design, line-bid items, bidding support, and full-time construction management and hydrogeological oversight during drilling; Phase 2 covers the engineering design for well equipping, including architectural, civil, mechanical, structural, electrical, and instrumentation and controls systems for testing and commissioning, with ongoing engineering support during construction. The well casing must be 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing casing depth, with sanitary seal placement compliant with AWWA standards. All work must adhere to Build America, Buy America Act requirements, including documentation of domestic content for iron, steel, and manufactured products, and compliance with federal procurement rules under 2 CFR Part 184. The project is funded in part by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, triggering full compliance with Title 2 CFR Part 200, including debarment and suspension rules, lobbying restrictions under the Byrd Act, Clean Air Act and Clean Water Act subrecipient clauses applicable to subcontracts over $150,000, and procurement of recovered materials when purchases exceed $10,000. The Consultant must provide comprehensive services including hydrogeological analysis, borehole geophysics, geotechnical investigation, water quality sampling, environmental permitting with SWRCB coordination, civil and structural engineering, utility coordination, topographic and boundary surveying, construction inspection, QA/QC, and community outreach. All key personnel must be identified with resumes, professional licenses, and certification details, and the firm must demonstrate experience with municipal groundwater projects and public agency collaboration. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a not-to-exceed limit anticipated of $1,000,000. The contract requires monthly invoicing with progress reports, adherence to a 45-day payment term, and records retention for four years post-final payment. The Consultant must comply with the EVMWD

GEI Consultants, Inc.

POSTED

about 9 hours ago

DEADLINE

Request for Proposals for Professional Engineering Staff Augmentation Services

Solicitation # RFP 130-13479

Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.

Grant County PUD

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Product Verification Testing (PVT) Sample ManagementThe contract titled Product Verification Testing (PVT) Sample Management governs the secure handling, labeling, and tracking of test samples used in product verification processes, with an emphasis on strict segregation to prevent any unauthorized posting to inventory stock. All activities must adhere to rigorous documentation protocols to ensure traceability and compliance, ensuring that samples are physically and administratively isolated from regular production or inventory streams at all times. This subcontract is issued under NAICS code 541380, indicating a focus on scientific and technical consulting services, and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The solicitation was posted on August 3, 2026, with responses required by September 3, 2026, and performance is expected to occur under the oversight of the contracting office, though specific location details are not provided. The nature of the work demands complete accountability and procedural discipline to maintain the integrity of verification outputs and prevent systemic errors in product validation.

Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Preservation, Packaging, and Military-Compliant ShippingThe contract requires the preservation of items using corrosion preventive compounds, followed by dry storage packaging in full compliance with MIL-STD-2073-1E standards. All packaging must be labeled according to MIL-STD-129 specifications to ensure proper identification and handling throughout the supply chain. The finished packages are to be shipped FOB origin to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with the contractor responsible for all preparation, packaging, and shipping duties up to the point of departure from their location. The work must be performed in strict adherence to military standards to ensure long-term protection and readiness of the equipment or components. This is a subcontract under the NAICS code 484220, which pertains to truck transportation for scenic and sightseeing purposes, though the specific nature of the transported items and their logistical handling indicate a specialized defense logistics context. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. There is no set-aside designation specified, and the contract does not indicate a specific point of contact or physical office location beyond the destination facility in New Cumberland, PA. All work must be completed and shipped according to the outlined military standards before the deadline.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Unique Item Identification (UID) and Data Matrix Marking ServicesThe contract requires the application of Unique Item Identification (UID) markings in compliance with MIL-STD-130 specifications, utilizing Data Matrix symbols formatted according to ISO/IEC 15434 standards to ensure accurate and permanent identification of military parts. Each item must be serialized to enable end-to-end traceability throughout the defense supply chain, with rigorous verification processes in place to confirm the readability, accuracy, and durability of the markings under operational conditions. The work is performed under a subcontract arrangement for the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, and must adhere strictly to federal guidelines for item identification and data structure. The solicitation was posted on August 3, 2026, with responses due by September 3, 2026, and falls under the NAICS code 811211, indicating a focus on electronic and precision equipment repair and maintenance services supporting military hardware.

Consumer Electronics Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Manufacture of Air Conditioning Duct AssembliesThe contract requires the fabrication, assembly, testing, and certification of duct assemblies specifically designed for military air conditioning and heating systems, with strict adherence to military specifications to ensure operational reliability and environmental compatibility. All deliverables must be fully traceable through verified CAGE codes and part numbers to maintain accountability throughout the supply chain and support long-term maintenance and logistics requirements. The work is classified as a subcontract under NAICS code 332312, indicating the focus on HVAC equipment manufacturing, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense to support critical defense infrastructure. Bid responses must be submitted by the deadline of September 3, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or certification status. The place of performance details are not provided, suggesting the work may be performed at the contractor’s facility or other approved locations, subject to approval. The contract is accessible via the DIBBS portal under solicitation number SPE4A526R0251, where full technical requirements and compliance documentation can be obtained. Successful bidders must demonstrate proven capability in military-grade HVAC component manufacturing and quality control processes to meet the rigorous standards expected by the DoD.

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation and assessment of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for contractors handling sensitive government data. The scope includes developing a System Security Plan, maintaining a Plan of Action and Milestones to address identified gaps, and establishing processes for timely cyber incident reporting in accordance with regulatory requirements. All activities must align with the specifications outlined in NIST SP 800-171 to protect the confidentiality, integrity, and availability of controlled unclassified information. The contract is structured as a subcontract under the Department of Defense, specifically issued by the ASC SUPPLIER OPER OEM DIVISION, and is categorized under NAICS code 541512 for computer systems design services. The solicitation was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a short turnaround for proposals. Performance is expected to occur in support of DoD operations, though no specific location is designated. Contractors must demonstrate proven capability in cybersecurity compliance, documentation, and incident response to qualify and meet the obligations outlined in the agreement.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract calls for independent quality verification services at the origin to ensure threaded rings conform to strict attribute standards using MIL-STD-1916 zero-based sampling plans, which require no prior inspection history and enforce deterministic acceptance criteria based on critical, major, and minor defect thresholds. This methodology demands that every lot be evaluated for full compliance without statistical sampling assumptions, making it a rigorous, high-stakes validation process designed to eliminate nonconforming product before release. The work is structured as a subcontract under NAICS code 541330, indicating specialized engineering and technical services, and is administered by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, with a response deadline of August 11, 2026, and a posted date of August 3, 2026. The place of performance and point of contact details are unspecified, implying that quality verification activities may occur at the supplier’s facility or other designated origin locations without geographic restrictions imposed by the solicitation.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Packaging, Marking, and Shipment Compliance ServicesThe contract requires the provision of military-compliant packaging, labeling, and shipment preparation services in full alignment with Department of Defense and Defense Logistics Agency standards, specifically adhering to MIL-STD-129 and MIL-STD-2073-1E specifications. All activities must ensure that defense materials are properly contained, marked, and prepared for logistical transport, meeting strict federal guidelines for durability, traceability, and operational readiness. The work is classified as a subcontract under NAICS code 493190 and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance obligations must be fulfilled according to the defined DoD protocols, with no flexibility in standards or documentation. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026. The place of performance and specific geographic details are not specified, indicating potential flexibility in location as long as compliance requirements are met. Interested parties must access the official DIBBS portal via the provided link to submit proposals, and there is no set-aside designation applied to this opportunity.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Manufacture and Supply of Externally Threaded RingsPrecision fabrication and delivery of externally threaded rings meeting stringent military specifications is required under this subcontract, with full compliance to MIL-STD-129 and MIL-STD-1916 governing labeling, packaging, and quality assurance standards for Department of Defense shipments. The contractor must ensure all components are manufactured to exacting tolerances, properly marked, and packaged for secure transportation, with quality control processes integrated throughout production to guarantee conformance. The opportunity is posted under NAICS code 332510 for precision machining and is solicited by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Responses must be submitted by August 11, 2026, and the contract is intended for subcontracting purposes with no set-aside designation specified. The place of performance and point of contact details are not provided in the solicitation, and all information is accessible via the official DIBBS platform link.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

DLA Contracting and WAWF Invoicing SupportThis contract provides administrative support for the execution of Defense Logistics Agency contracts, with a focused emphasis on WAWF invoicing, delivery documentation, and compliance with federal billing standards. The work will ensure that all financial and logistical records are accurately prepared, submitted, and maintained in alignment with Department of Defense requirements, particularly within the context of supplier operations and procurement workflows. Successful performance will require a thorough understanding of DLA’s contracting processes, real-time data entry in WAWF, and adherence to strict documentation protocols for delivery confirmations and invoice submissions. The contract is classified as a subcontract under NAICS code 541214, indicating it involves accounting, bookkeeping, and payroll services as part of broader administrative support functions. It is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense and has a place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 6, 2026, with no set-aside designation specified. All work must be performed in strict compliance with federal regulations and DLA procedural guidelines, with the expectation of consistent, timely, and error-free processing of contract-related documentation.

Payroll Services

POSTED

about 20 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all military equipment and materials meet rigorous defense specifications for protection, durability, and traceability. This includes proper containerization, barcode marking, and adherence to standardized labeling protocols to guarantee uniformity and readiness across the supply chain. All work must be performed to support Department of Defense logistics and operational requirements, with the place of performance located in New Cumberland, Pennsylvania, at a zip code of 17070-5002. The opportunity is structured as a subcontract under NAICS code 561910, which pertains to other support services, and is issued by the ASC SUPPLIER OPER OEM DIVISION. It has a tight turnaround with a posting date of August 3, 2026, and a response deadline of August 6, 2026, indicating an urgent procurement timeline. Interested parties must submit proposals in time to meet this deadline and demonstrate full compliance with the referenced military standards without exception. There is no set-aside classification specified, and the solicitation is accessible via the DIBBS platform.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires the identification of hazardous materials within transducers and the preparation of complete Safety Data Sheets in full compliance with Defense Federal Acquisition Regulation Supplement and Federal Acquisition Regulation requirements. All work must be performed to ensure accurate documentation of chemical composition, health hazards, handling procedures, and environmental impacts as mandated by federal defense procurement standards. The deliverables are critical for operational safety, regulatory adherence, and supply chain transparency within the Department of Defense. Performance of this subcontract must be carried out at the specified place of performance in New Cumberland, Pennsylvania, with a strict submission deadline of August 6, 2026. The North American Industry Classification System code 541690 indicates this falls under other scientific and technical consulting services, emphasizing the need for expert knowledge in hazardous materials analysis and regulatory documentation. This engagement supports the ASC Supplier Operations OEM Division’s obligation to maintain compliant and safe material sourcing across defense systems.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Precision Electronic Component ManufacturingThe contract involves the manufacture of a high-reliability motional transducer in strict compliance with military specifications, encompassing the full lifecycle from component sourcing and assembly to calibration and final inspection. The work must meet rigorous quality and performance standards expected for defense applications, requiring adherence to precise technical and procedural protocols throughout production. All stages of manufacturing are subject to stringent oversight to ensure operational integrity and consistency under demanding environmental and operational conditions. The contract is classified as a subcontract under NAICS code 334519, issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, with performance required at a designated facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 6, 2026, indicating a highly accelerated procurement timeline. The award will likely prioritize vendors with proven experience in military-grade electronic component manufacturing and the capability to deliver certified, traceable, and inspected units within the tight deadline.

Other Measuring and Controlling Device Manufacturing

POSTED

about 20 hours ago

DEADLINE