Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Documentation and Technical Compliance Support

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
Transportation Planning and Public EngagementThis subcontract for the City of Fayetteville focuses on transportation planning and public engagement. The selected provider will support prime contractors by facilitating community outreach, conducting public workshops, and coordinating directly with the Georgia Department of Transportation. The primary objective is to integrate technical traffic and walkability data into a comprehensive plan, culminating in the delivery of a Final Comprehensive Transportation and Walkability Study Report. Qualified candidates must hold professional planner certification to perform these services under NAICS code 541330. The solicitation was posted on October 28, 2026, with a response deadline of December 3, 2026.
City of Fayetteville

POSTED

about 1 hour ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Walkability and Pedestrian Infrastructure StudyThe Walkability and Pedestrian Infrastructure Study is a subcontract opportunity for the City of Fayetteville in Georgia. The selected contractor will support prime contractors on transportation projects by performing comprehensive walkability studies, which include pedestrian audits, sidewalk condition assessments, and ADA compliance evaluations for ramps and crosswalks. The scope of work requires the use of GIS mapping software to analyze connectivity and pedestrian desire lines, culminating in the delivery of a formal walkability study report and a detailed pedestrian improvement plan. Qualified candidates must hold an AICP or equivalent urban planning certification. This opportunity was posted on October 28, 2026, with a response deadline of December 3, 2026. The project falls under NAICS code 541330, focusing on engineering services to enhance the city's pedestrian infrastructure.
City of Fayetteville

POSTED

about 1 hour ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Traffic Engineering and Intersection AnalysisThis subcontract for Traffic Engineering and Intersection Analysis involves providing technical traffic engineering services for prime contractors on City of Fayetteville transportation projects. The scope of work focuses on the SR 54 and SR 85 intersection, where the contractor will conduct traffic volume and turning movement counts, analyze intersection level of service and delay, and evaluate traffic patterns to identify potential safety hazards. The final deliverables include a comprehensive traffic analysis report and a set of technical recommendations. To be eligible, the contractor must possess a Professional Engineer license in the state of Georgia and have access to specialized intersection modeling software. This opportunity falls under NAICS code 541330 and has a response deadline of December 3, 2026.
City of Fayetteville

POSTED

about 1 hour ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Water Distribution Hydraulic Modeling and Calibration
City of Albany

POSTED

about 1 hour ago

DEADLINE

in 26 days
NAICS: 541330
New
SLED
ON-CALL STRUCTURAL ENGINEERING SERVICES
Solicitation # 26/27-15
The Town of Manchester, Connecticut, is soliciting proposals under solicitation number 26/27-15 for a qualified structural engineering firm to provide on-call services on an as-needed basis. The scope of work involves the review, analysis, inspection, and design of municipal infrastructure. To be eligible, the consultant must be a professional engineer licensed in the State of Connecticut. Proposals are due by October 29, 2026, and must be submitted electronically via the Town's procurement portal. The selection process is based on a points-based scoring method evaluating qualifications, relevant experience, key personnel, and hourly pricing, though the award is not based solely on cost. The Town reserves the right to shortlist candidates for interviews and negotiate with the selected vendor prior to the final award. Contractors must adhere to strict insurance requirements, including General Liability, Professional Liability, Cyber Risk, and Environmental Liability, each with minimums of 1,000,000 dollars. Additionally, the contract is subject to the Town of Manchester Living Wage Ordinance for values exceeding 25,000 dollars per fiscal year, requiring specific hourly wage rates for eligible employees and the submission of a Living Wage Certification. Required submission documents include a PDF proposal, a current IRS Form W-9, a SAM number, and a disclosure of any municipal litigation or arbitration from the past ten years. All services must comply with the laws of the Federal Government and the State of Connecticut.
Engineering

POSTED

about 2 hours ago

DEADLINE

in 8 days
NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330 for engineering services. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should direct inquiries to the primary point of contact, Sepideh Sippy Aria, to ensure all submission requirements are met by the closing date.
Kiewit Infrastructure West Co.

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets DBE certified firms to support the critical infrastructure and operational resilience of the utility agency within the state of California.
Aanko Technologies Inc.

POSTED

about 2 hours ago

DEADLINE

in 19 days
NAICS: 541330
New
International
Quantity Surveying Services
London Borough of Bromley

POSTED

about 2 hours ago

DEADLINE

in 29 days
NAICS: 541330
New
SLED
On-Site Pavement Engineering Consulting
State Highway Administration

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Pavement Design and Treatment Engineering
State Highway Administration

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Pavement Data Collection and Analysis Services
State Highway Administration

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
SCADA Systems Integrator
Department of Economic Development

POSTED

about 3 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This contract requires the preparation and submission of comprehensive technical documentation to ensure compliance with Department of Transportation standards and to support eligibility for ballistic testing. The scope includes developing and providing mix designs, curing logs, and material certifications that meet exacting regulatory requirements, ensuring all materials and processes are properly recorded and verifiable. The work is tied to a specific performance location at Fort Polk, Louisiana, with all deliverables destined to support defense-related testing and certification efforts under the oversight of the Department of Defense. The contract is designated as a HUBZone Set Aside, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete. It falls under NAICS code 541330 for engineering services and is structured as a subcontract opportunity with a narrow response window, closing on May 15, 2026 at 6:00 PM. The posting date of May 11, 2026, indicates an accelerated timeline, and the solicitation is managed by the W2R2 USA Engr R & D Ctr, emphasizing the technical precision and urgency required for compliance and testing readiness.

General Info

Prepare and submit technical documentation for Army compliance under HUBZone subcontract at Fort Polk.

Agency

Department Of Defense → W2R2 USA Engr R & D Ctr

NAICS

541330 - Engineering Services

Place of Performance

Fort Polk, LA, 71459, USA

Set-Aside

HZC

Documents

This scope was carved out of W912HZ26Q1017.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Precast Concrete Slabs, Cylinders, and Materials

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W2R2 USA Engr R & D Ctr
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W2R2 USA Engr R & D Ctr
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Preparation and submission of technical documentation including mix designs, curing logs, and material certifications to ensure compliance with DOR and support ballistic testing eligibility.

More opportunities from Department Of Defense → W2R2 USA Engr R & D Ctr

Same awarding agency

NAICS: 238120
New
Federal
Request for Information for On-Site Fabrication and Assembly of a Three-Bay High-Performance Magazine (HPM) Structure
Solicitation # W912HZ27X1CTB
The U.S. Army Corps of Engineers Engineer Research and Development Center is conducting market research via a Request for Information to identify US-based contractors capable of the on-site fabrication and final assembly of a three-bay, monolithic reinforced concrete High-Performance Magazine structure. Located at Range 19, Fort Polk, Louisiana, this experimental test structure will be cast-in-place and is intended for eventual destruction. The scope of work includes the procurement and installation of Grade 60 reinforcing steel, 10,000 PSI self-consolidating concrete, structural sand fill with a density of 100 PCF, and the construction of three reinforced concrete doors and a protective sand/earth berm. The project requires a contractor with expertise in high-strength self-consolidating concrete, robust engineered formwork systems, and the installation of continuous, non-spliced rebar. All site activities must be completed within 240 days of contract award, with a mandatory 14-day mobilization notice provided to the Technical Point of Contact. The government requires strict adherence to ASTM standards for concrete compressive strength, slump flow, and ready-mix requirements, with precise dimensional tolerances of +/- 0.5 inches for overall dimensions and +/- 0.375 inches for wall and slab thicknesses. Interested vendors must submit their capabilities statements and responses to specific technical questions by November 4, 2026.
Structural Steel and Precast Concrete Contractors

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 238120
Federal
Specialized Concrete Placement ContractorThis subcontract opportunity is for a Specialized Concrete Placement Contractor to support prime contractors on US Army Corps of Engineers ERDC projects located at Fort Polk. The scope of work involves the on-site casting, pouring, and finishing of a monolithic HPM structure using 10,000 PSI self-consolidating concrete. The contractor is responsible for providing all necessary equipment, including cranes, concreting pumps, and vibrators, to deliver a fully finished and cured reinforced concrete structure. The project requires strict adherence to Government Technical Point of Contact inspection hold points to ensure quality and compliance. Interested parties should note that the response deadline is November 4, 2026, and the work falls under NAICS code 238120 for the Department of Defense.
Structural Steel and Precast Concrete Contractors

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 238990
Federal
Structural Sand Fill Supplier and InstallerThis subcontract involves the procurement and installation of dry structural sand for prime contractors working on US Army Corps of Engineers ERDC projects. The selected provider is responsible for sourcing the material and installing it into clean, dry hollow wall cavities, ensuring the sand is protected from moisture during on-site storage to maintain quality. The primary technical requirement is to deliver installed sand fill compacted to a specific in-place density of 100 PCF. The work is to be performed at Fort Polk, Mississippi, under the Department of Defense. Interested parties must respond by November 4, 2026.
All Other Specialty Trade Contractors

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 238120
Federal
High-Pressure Engineered Formwork ContractorThis subcontract opportunity is for a High-Pressure Engineered Formwork Contractor to support prime contractors on US Army Corps of Engineers ERDC projects located at Fort Polk. The selected contractor will be responsible for the complete lifecycle of temporary formwork systems, including the design, fabrication, erection, and eventual removal. A critical technical requirement is the ability to engineer formwork capable of withstanding high fluid pressure from 10,000 PSI Self-Consolidating Concrete. The contractor must provide comprehensive formwork plans that include detailed bracing specifications and hydrostatic pressure calculations, all of which must be certified with a Professional Engineering stamp. This project falls under NAICS code 238120 and is managed through the Department of Defense for the W2R2 USA Engr R & D Ctr. Responses for this opportunity are due by November 4, 2026.
Structural Steel and Precast Concrete Contractors

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 332312
Federal
Grade 60 Reinforcing Steel Supplier/FabricatorThis subcontract opportunity is for a supplier and fabricator to provide Grade 60 reinforcing steel for prime contractors working on US Army Corps of Engineers ERDC projects. The scope of work includes the supply of materials, mechanical bending of all reinforcing bars according to specific structural details, and the final delivery of the fabricated rebar to the project site located in Fort Polk, Louisiana. Managed by the Department of Defense under the W2R2 USA Engr R & D Ctr, this requirement falls under NAICS code 332312. Interested parties must submit their responses by the deadline of November 4, 2026.
Fabricated Structural Metal Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 327320
Federal
10,000 PSI Self-Consolidating Concrete (SCC) SupplierThis subcontract involves the supply of 10,000 PSI self-consolidating concrete for prime contractors working on US Army Corps of Engineers ERDC projects located at Fort Polk. The supplier is responsible for providing specific mix designs that achieve the required strength and delivering the ready-mix concrete directly to the site. The scope of work includes supporting on-site verification of plastic concrete properties through slump flow, T-50, T-90, and J-Ring testing. Additionally, the supplier must cast test cylinders for field-curing and subsequent laboratory delivery to ensure quality compliance.
Ready-Mix Concrete Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 513120
Federal
Notice of Intent to Sole Source Association for Computing Machinery e-Journals
Solicitation # W912HZ27QA010
The US Army Corps of Engineers, Engineer Research and Development Center, intends to award a sole source contract to the Association for Computing Machinery for multiple physical site licenses for ACM Journal publications. This procurement utilizes Simplified Acquisition Procedures under FAR Part 12, as the Association for Computing Machinery holds exclusive worldwide distribution rights for the ACM Digital Library and ACM Open. The requirement falls under NAICS code 513120, with a size standard of 1000 employees. While this notice is not a formal request for competitive quotes, the government will consider capability statements and proposals from other responsible sources to determine if competitive procurement is necessary. Interested parties must provide detailed evidence of their ability to fulfill the requirement, including past experience and references, via email to the designated point of contact. All submissions must be received by November 2, 2026.
Periodical Publishers

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 513120
Federal
Notice of Intent to Sole Source American Society of Civil Engineers e-Journals
Solicitation # W912HZ27QA008
The US Army Corps of Engineers, Engineer Research and Development Center, intends to award a sole source contract to the American Society of Civil Engineers for multiple physical site licenses. This procurement, conducted under Simplified Acquisition Procedures, covers a comprehensive suite of proprietary materials including ASCE Journals Online from 1983 to the present, Online Proceedings, E-books, Standards, and subscriptions to Civil Engineering and GeoStrata magazines. The requirement falls under NAICS code 513120 and is managed by the Department of Defense. While the government intends to proceed with a sole source award, this notice allows responsible sources to submit capability statements, proposals, or quotations to demonstrate their ability to fulfill the requirements. Any interested parties must provide detailed evidence of past experience with similar requirements to be considered. All submissions must be sent to the designated point of contact by the specified deadline for the government to determine if a competitive procurement is warranted.
Periodical Publishers

POSTED

7 days ago

DEADLINE

in 2 days
View Details
NAICS: 513120
Federal
GeoScienceWorld Journals
Solicitation # W912HZ27QA005
The US Army Corps of Engineers, Engineer Research and Development Center, intends to award a sole source contract to GeoScienceWorld Journals for the procurement of one GeoScienceWorld subscription and one GeoRef subscription. This acquisition will be conducted under Simplified Acquisition Procedures as outlined in FAR Part 12, utilizing NAICS code 513120. Because these subscriptions are proprietary, the government has identified GeoScienceWorld Journals as the only provider capable of fulfilling the requirement. While a formal solicitation will not be issued, the agency is accepting capability statements, proposals, or quotations from responsible sources to determine if a competitive procurement is warranted. Interested parties must provide detailed information regarding their ability to fulfill the requirement, including past experience and references, via email to the designated point of contact. All submissions must be received by October 30, 2026, and oral communications are not permitted.
Periodical Publishers

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 532490
Federal
Vehicle Recompete: HEAVY EQUIPMENT RENTAL MASTER BPA U438250 — BPA W912HZ23Q8775The Department of the Army has established a Heavy Equipment Rental Master Blanket Purchase Agreement under solicitation W912HZ23Q8775, with an ordering period extending through April 19, 2028. This vehicle consists of four awards and currently manages 32 active task orders with a total combined value of 736,890.48 dollars. The primary focus of these orders involves providing industrial and heavy equipment rentals, with significant activity centered at Fort Johnson, Louisiana. Two companies currently hold orders under this agreement, with BSE Performance, LLC serving as the primary provider with 646,450.48 dollars across 26 orders, followed by Cherokee Services, LLC with 90,440 dollars across six orders. The contract is classified as likely to be recompeted, with a pre-forecast date noted for October 19, 2026. The procurement falls under NAICS code 532490 for equipment rental services.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

10 days ago

DEADLINE

N/A
View Details
NAICS: 513120
Federal
American Chemical Society (ACS) Journal
Solicitation # W912HZ27QA003
The US Army Corps of Engineers, Engineer Research and Development Center, intends to award a sole source contract to ACS Publications for a physical site license to the American Chemical Society Digital Library. This acquisition, conducted under FAR Part 12 Simplified Acquisition procedures, covers the ACS All Publications Package, including Web Editions and Legacy Archives. The requirement falls under NAICS code 513120 and is based on the proprietary nature of the content owned exclusively by ACS Publications. While a formal solicitation will not be issued, the government is accepting capability statements and proposals from responsible sources to determine if the requirement should be competed. Interested parties must provide detailed evidence of their ability to fulfill the requirement, including past experience and references, via email to the designated point of contact. All submissions must be received by October 29, 2026, and the final decision to proceed with a sole source or competitive procurement remains at the discretion of the government.
Periodical Publishers

POSTED

12 days ago

DEADLINE

in about 24 hours
View Details
NAICS: 333996
Federal
Vehicle Recompete: FACILITIES AND RESEARCH MODEL SUPPORT SERVICES — BPA W912HZ23R0R5DThe Department of the Army has established a Blanket Purchase Agreement for Facilities and Research Model Support Services under vehicle W912HZ23R0R5D, with an ordering period extending through January 19, 2028. This vehicle encompasses awards W912HZ23A0034 and W912HZ23A0035 and is currently classified as likely to be recompeted. Electro Mechanical Solutions Inc is the sole incumbent holding orders on this vehicle, with a total value of 89,331 dollars. This funding is tied to a single active task order dedicated to electrical upgrades for CHL Building 3281.
Fluid Power Pump and Motor Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Closed
Federal
Technical Data and CDRL Compliance Documentation
Nuwc Division Newport

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Technical Data Package Development & Engineering Support
Ok DLA Aviation At Oklahoma City

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Final System Acceptance Testing (FSAT) and Documentation
FA2521 45 Cons Pk

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Federal
Alternate Source Qualification and Technical Validation Services
Pa DLA Aviation At Philadelphia

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
Engineering Drawing Compliance and Documentation
Inc Federal Prison Industries

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541330
Closed
Federal
Quality Assurance and Inspection Services
SPRMM1 DLA Mechanicsburg

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Specialized Testing and Inspection Coordination
255-NETWORK Contract Office 15 (36C255)

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Federal
Design and Engineering Services
Dsc Contracting Services Division

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
Technical Data Package and Compliance Documentation Support
DLA Land And Maritime

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Specialty Testing and Commissioning Services
244-NETWORK Contract Office 4 (36C244)

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541330
Closed
Federal
Fire Sprinkler System Design & Engineering
FA3029 71 Ftw Cvc

POSTED

6 months ago

CLOSED

4 months ago
View Details
NAICS: 541330
Closed
Federal
Technical Documentation and Certificate of Conformance (COC) Services
Aviation Logistics Center (ALC)(00038)

POSTED

6 months ago

CLOSED

5 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS