Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Acceptance at Origin

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Defense Logistics Agency under the Department of Defense focuses on quality inspection and acceptance at origin. The primary objective is to conduct first-article, in-process, and final quality inspections based on AQL standards of 0.1, 1.0, and 4.0 to ensure all products meet specified requirements. The contractor is responsible for documenting any non-conformances identified during the inspection process. This engagement falls under NAICS code 811211 and is managed through the Defense Logistics Agency's procurement systems.

General Info

DLA subcontract for quality inspection and acceptance at origin using AQL standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

811211 - Consumer Electronics Repair and Maintenance

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A726F9328.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, NONMETALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 11

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform first-article, in-process, and final quality inspections at origin per AQL standards (0.1/1.0/4.0) and document non-conformances.

Similar Contracts

Same NAICS industry code

PExA 2.1 to PExA Cap Instrument Upgrade ServiceThis subcontract, titled PExA 2.1 to PExA Cap Instrument Upgrade Service, involves performing technical upgrades of PExA 2.1 Research Instruments to PExA Cap vial-based collection functionality. The project supports prime contractors on research projects for the National Institutes of Health under the Department of Health and Human Services. The scope of work includes upgrading existing hardware and software, providing professional services, and ensuring calibration to research instrument standards to deliver a fully functional PExA Cap instrument. The contract includes a one-year warranty on the upgraded equipment. It is categorized under NAICS code 811211. The solicitation was posted on October 29, 2026, with a response deadline of November 12, 2026.

National Institutes Of Health Olao

POSTED

about 16 hours ago

DEADLINE

Specialized Electronic Vehicle Systems RepairThe Specialized Electronic Vehicle Systems Repair subcontract involves the maintenance and repair of electrostatic discharge sensitive electronic components for prime contractors supporting US Air Force vehicle projects. The selected provider must deliver certified serviceable electronic components while operating strictly in accordance with T.O. 00-25-234. To ensure compliance, the contractor is required to utilize certified ESD control programs, ESD-safe workstations, grounding equipment, and specialized electronic testing tools. This Department of Defense opportunity falls under NAICS code 811211, with a response deadline of November 11, 2026.

0411 Aq Hq Contract Augmented

POSTED

DEADLINE

Electrical Chassis Repair ServicesThis subcontract for Electrical Chassis Repair Services involves the refurbishment of Electrical Chassises with NIIN O15262273 for prime contractors supporting NAVSUP Weapon Systems Support projects. The selected provider will execute repairs in strict accordance with Technical Data Package Version O01 and specifications provided by the Naval Surface Warfare Center or DODSSP. The scope of work requires the use of specialized electrical refurbishment tools and full support for Government Source Inspection to ensure the final delivered product is properly repaired and inspected. Managed under NAICS code 811211 for the Department of Defense, this opportunity was posted on October 27, 2026, with a response deadline of October 30, 2026. The primary objective is the delivery of fully functional, inspected electrical chassis units that meet all government technical standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 16 hours

Medical Equipment Installation and MaintenanceThis subcontract for Medical Equipment Installation and Maintenance supports prime contractors on Department of Veterans Affairs medical laboratory projects in Tampa, Florida. The scope of work involves the delivery, installation, and continuous technical maintenance of laboratory hardware, including user-defined calibration and both hardware and software upgrades. All technical services must be performed by manufacturer-certified technicians to ensure compliance and operational efficiency. The contractor is responsible for providing all installed equipment and submitting detailed calibration reports. Additionally, the agreement requires the management of equipment removal and return shipping upon the conclusion of the contract. This effort falls under NAICS code 811211 and is managed through the Network Contract Office 8.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Cable System Maintenance and Repair ServicesThe Cable System Maintenance and Repair Services subcontract involves providing technical support, troubleshooting, and hardware replacement for prime contractors at the Robinson Correctional Center in Illinois. The selected provider is responsible for dispatching technicians within 24 to 48 hours of a reported service problem and ensuring that replacement parts are installed and services are restored within a 48-hour window using specialized signal testing equipment. To maintain facility security, all technicians must successfully pass comprehensive background checks. Additionally, the contractor is required to deliver detailed maintenance logs and repair records upon the completion of each service call. This opportunity falls under NAICS code 811211, with a response deadline set for November 3, 2026.

ROBINSONCC426 - Robinson Correctional Center

POSTED

DEADLINE

Training Aid Weapon Technician/SupplierThis subcontract opportunity with the Department of National Defence involves the supply, maintenance, and repair of training aid weapons for prime contractors on simulator projects. The selected provider will be responsible for performing first-echelon repair work, managing the custody and care of compressed air systems, and supplying necessary spare parts and compressed air chargers to ensure a functioning inventory. To be eligible, the contractor must possess Secret security clearance and be registered with the Controlled Goods Program. The contract is categorized under NAICS code 811211 and is based in Canada, with a response deadline set for November 10, 2026.

Department of National Defence

POSTED

DEADLINE

Dental Suite Equipment Maintenance and CalibrationThe Dental Suite Equipment Maintenance and Calibration subcontract involves providing preventative maintenance, repair, and calibration services for prime contractors working on Department of Public Health projects at Western Massachusetts Hospital. The scope of work focuses on the routine inspection and safety calibration of X-ray machines and dental chairs using specialized diagnostic tools to ensure all equipment is fully maintained and certified. Qualified providers must hold manufacturer-specific certifications or be a Certified Biomedical Equipment Technician. This opportunity is categorized under NAICS code 811211, with performance taking place in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 30, 2026.

WMH001 - Western Massachusetts Hospital

POSTED

DEADLINE

in about 1 month

Post-Warranty Service and Maintenance (Years 2-3)This subcontract focuses on providing post-warranty service and maintenance for the QuantStudio 5 Dx instrument supporting Tarrant County laboratory projects. The scope of work includes performing scheduled preventative maintenance, corrective repairs, troubleshooting, and ongoing qualification checks to ensure maximum instrument uptime and valid qualification status. All services must be executed by a Certified Field Service Engineer using original equipment manufacturer replacement parts. The opportunity is categorized under NAICS code 811211 and is managed by Tarrant County in Texas. Interested parties should note that the posting date is October 16, 2026, with a response deadline set for November 5, 2026. This contract specifically covers the second and third years of the post-warranty service period.

POSTED

DEADLINE

QuantStudio 5 Dx Installation and Qualification ServicesThis subcontract for Tarrant County in Texas involves the physical installation, network integration, and technical qualification of the QuantStudio 5 Dx genetic analysis instrument. The scope of work includes executing account and security configurations, verifying connectivity with Diomni software, and completing all necessary maintenance qualification procedures to ensure the instrument is fully operational. To fulfill these requirements, the project mandates the use of a Certified Field Service Engineer specifically qualified for the QuantStudio 5 Dx. The contract was posted on October 16, 2026, with a response deadline of November 5, 2026, falling under NAICS code 811211.

POSTED

DEADLINE

Sensy Sampling and Analysis Technical ServicesThe Sensy Sampling and Analysis Technical Services subcontract involves providing specialized sampling and analysis services for prime contractors operating on New York Power Authority projects at the Charles Poletti Power Project. The scope of work focuses on the technical analysis of samples, system calibration, and performance verification specifically utilizing Sensy sampling and analysis systems. To ensure operational standards, personnel are required to possess technical certification and training specific to Sensy equipment. Key deliverables for this engagement include the submission of detailed analysis reports, the provision of calibrated systems, and the maintenance of technical service logs. This opportunity is categorized under NAICS code 811211 and is associated with the Power Authority of New York. Interested parties should note the response deadline of November 3, 2026.

Power Authority of New York

POSTED

DEADLINE

Battery Charger Repair and Functional RestorationThis subcontract involves the teardown, evaluation, repair, and modification of battery chargers for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for delivering 15 fully repaired and functional battery chargers under NSN 6130-01-158-5195, ensuring all work adheres to technical orders, drawings, and the specific requirements of CAGE Code 072E5 and Reference Number 1657613-100. Compliance is mandatory with MIL-STD-130, REV N for marking and all applicable CMMC standards. The project falls under NAICS code 811211 and is managed through the Department of Defense. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Super Grid Transformer (SGT) Refurbishment SpecialistThis subcontract involves the core mechanical and electrical refurbishment of three super grid transformers for prime contractors operating at UK Atomic Energy Authority facility projects. The scope of work includes internal tank inspection and cleaning, the replacement of bushings, seals, and gaskets, and comprehensive testing of insulation and windings. To ensure operational integrity, the project requires the use of vacuum drying systems and specialized high-voltage testing equipment. The primary objective is the delivery of three fully refurbished and commissioned super grid transformers. This specialized technical engagement falls under NAICS code 811211 and is managed through the UK Atomic Energy Authority, with a response deadline set for November 5, 2026.

UK Atomic Energy Authority

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Indicator Lights (NSN 6210000011430)This subcontract involves the procurement and delivery of two indicator lights, part number 90KA1D1 and NSN 6210000011430, for use in the AN/GYQ-18 Display system. Sourced from Safran Electronics and Defense, Avionics USA, LLC, these components are intended for prime contractors operating under Defense Logistics Agency aviation component contracts. The delivery terms are established as FOB Origin, with the place of performance located in Ishpeming, Michigan. To be eligible for this requirement, suppliers must maintain active SAM registration and ensure full DIBBS compliance. The opportunity is categorized under NAICS code 423850 and was posted by the Department of Defense. Interested parties must submit their responses by the deadline of November 9, 2026.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Power Supply Unit Supplier (NSN 6130-01-524-9767)This subcontract involves the procurement or manufacture of two power supply units matching NSN 6130-01-524-9767 for prime contractors supporting Defense Logistics Agency supply contracts for the USS JOHN BASILONE JR DDG 122. The selected supplier is responsible for ensuring all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinated for delivery via the fastest traceable means. Managed under NAICS code 423610 for the Department of Defense, the contract was posted on October 29, 2026, with a response deadline of November 9, 2026. The place of performance is designated as FPO 34087.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Lead-Acid Sealed Gel Electrolyte Storage Battery SupplyThis subcontract through the Defense Logistics Agency involves the supply of one lead-acid, sealed, gel electrolyte storage battery, identified by NSN 6140-01-310-7173. The contractor is responsible for ensuring the item is marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed battery is required FOB Destination. The opportunity falls under NAICS code 335910 and is associated with the Department of Defense. The place of performance is located in North Little Rock, Arkansas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 29, 2026.

Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract through the Defense Logistics Agency involves the manufacture or procurement of specialized labels under NSN 7690-01-417-9227 for prime contractors on Department of Defense supply contracts. The contractor is responsible for ensuring all labels meet specific technical requirements, including the application of Special Marking Code 32 for shelf life management. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 323111 and requires delivery via traceable shipping within 30 days after receipt of order. Performance will take place in the 28310 zip code area. Interested parties must respond by the deadline of November 5, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 11 hours ago

DEADLINE

Supply of Parts Kit, Gun (NSN 1005-01-723-1183)This subcontract involves the procurement of one complete gun parts kit, specifically identified by NSN 1005-01-723-1183, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier must ensure the kit adheres to the DLA Master List of Technical and Quality Requirements (RA001) and follows MIL-STD-129 standards for all marking and shipment procedures. The contract requires strict adherence to cybersecurity protocols, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance will take place at FPO 09523 under NAICS code 332994. The response deadline for this requirement is November 9, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Plastic Press StripsThis subcontract involves the manufacture or sourcing of 1,000 plastic press strips under NSN 9330-01-679-0943 for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected provider must hold a small business certification and ensure all items are produced in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in Hattiesburg, Mississippi, with a final delivery deadline of March 30, 2026. The procurement falls under NAICS code 333310 and is managed through the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract involves the manufacture or sourcing of specialized labels under NSN 7690-01-417-9227 to support prime contractors for the Defense Logistics Agency. The selected provider must ensure all products adhere to strict military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and executing marking requirements per MIL-STD-129 and Special Marking Code 32. The scope of work requires the delivery of 2,000 rolls of labels to the bulk break point located at Fort Bragg, North Carolina. All deliverables must be completed and delivered within 30 days after the order is placed. This requirement falls under NAICS code 323111 and is managed through the Department of Defense.

Commercial Printing (except Screen and Books)

POSTED

about 11 hours ago

DEADLINE

Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

Air Conditioner Unit Supplier (NSN 4120-01-649-1002)This subcontract involves the procurement and delivery of air conditioner units matching NSN 4120-01-649-1002 to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for ensuring all units comply with specific packaging and marking requirements, as well as standards set by the Consumer Product Safety Act. Additionally, the provider must certify that no additive manufacturing processes were used in production and must supply Hazardous Material Identification and Material Safety Data Sheets where applicable. The contract is categorized under NAICS code 423440 and is managed through the Department of Defense. Performance of the contract takes place at FPO 96322-0001. Interested parties must adhere to the response deadline of November 3, 2026, to be considered for the delivery of these physical units.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Supply of NSN 4820013550268This subcontract involves the procurement of one unit of NSN 4820013550268 to support prime contractors under the Defense Logistics Agency. The selected provider is responsible for sourcing the specific part and ensuring all items are packaged according to ASTM D3951 standards. Additionally, all packaging must be marked and labeled in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 423830 and requires delivery of the unit FOB Destination to a performance location in FPO 96673. Interested parties must submit their responses by the deadline of November 9, 2026, for this Department of Defense requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Supplier of Identification Markers (NSN 7690014718188)This subcontract with the Defense Logistics Agency involves the manufacture or sourcing of specialized identification markers, specifically NSN 7690014718188 and General Dynamics Land Systems part LSCP740025. The selected supplier is responsible for delivering two units to the Anniston Army Depot, ensuring all items are marked and packaged in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Key requirements include full compliance with the Buy American Act and the guarantee of a non-extendable shelf life of 12 months. The contract falls under NAICS code 339999 and requires adherence to specific military specifications to support prime contractors on DLA supply contracts.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Fluid Cooler Core Assembly (Cummins P/N 4933306)This subcontract involves the supply of one Fluid Cooler Core Assembly, specifically Cummins Inc. part number 4933306, for prime contractors supporting Defense Logistics Agency contracts. The item is designated as a Critical Application Item, requiring formal certification of authenticity to ensure operational safety and reliability. The contractor is responsible for adhering to strict military standards, including marking requirements per MIL-STD-129 and packaging specifications per MIL-STD-2073-1E. Performance for this requirement is centered in San Diego, California, with the final deliverable being one properly marked and packaged core assembly.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Defense Shipment Labeling and Barcoding

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

First Article Testing (FAT) Coordination and Logistics

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Small Business and Socioeconomic Program Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Government Acceptance Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Acceptance Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

MARITIME SUPPLY CHAIN

POSTED

CLOSED

UID/Bar-Code Labeling and MIL-STD-130N Compliance

LAND SUPPLY CHAIN

POSTED

CLOSED

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Military Shipment Labeling and Bar-Coding

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Military Asset Marking and Traceability Services

LAND SUPPLY CHAIN

POSTED

CLOSED

Medical Imaging System De-Installation and Disassembly

Network Contract Office 19 (36C259)

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS