Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Acceptance Support

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of pre-shipment quality inspections following MIL-STD-1916 or ASQ Z1.4 standards, with a strict emphasis on zero-defect sampling methodologies to ensure product conformance and reliability. Quality systems must be fully aligned with AS9003 or ISO 9001, ensuring robust process controls, documentation, and continuous improvement practices are in place throughout inspection operations. The work is tied to a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with performance localized at TINKER AFB, OK, 73145-8000, and is solicited under NAICS code 811211, indicating service delivery within the repair and maintenance sector. All proposals must be submitted by August 13, 2026, with the opportunity posted on August 5, 2026, through the DIBBS platform.

General Info

Pre-shipment inspections per MIL-STD-1916 or ASQ Z1.4 at Tinker AFB, OK, under DoD subcontract, due August 13, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct pre-shipment quality inspections per MIL-STD-1916 or ASQ Z1.4, using zero-defect sampling and quality systems aligned with AS9003 or ISO 9001.

Similar Contracts

Same NAICS industry code

Emergency and Remedial Repair Services for Scientific Instruments

National Institutes Of Health Olao

POSTED

DEADLINE

On-Site Preventative Maintenance Services for Biomedical Equipment

National Institutes Of Health Olao

POSTED

DEADLINE

In-Country Warranty and Repair Support Services

US Embassy Panama City

POSTED

DEADLINE

Biomedical Equipment Maintenance and Calibration ServicesThe contract requires the performance of scheduled and on-demand maintenance, calibration, and repair services for V.A.C. ULTA™ Therapy Units, ensuring full compliance with manufacturer specifications and FDA regulatory standards. All service activities must include detailed service logging and support for warranty claims to maintain device functionality, safety, and regulatory adherence. The work is classified under NAICS code 811211 for medical equipment and supplies merchant wholesalers and is structured as a subcontract under the Department of Veterans Affairs’ 247-NETWORK Contract Office 7. Services must be delivered in alignment with federal healthcare device requirements, with all tasks documented thoroughly to support audit readiness and equipment lifecycle management. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, and the performance location is not specified, implying potential national scope.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Full-Service Warranty and Maintenance SupportThe contract requires the provision of a minimum one-year full-service warranty for the ARC-EX Stimulator system, encompassing all parts, labor, and software updates necessary to maintain optimal system performance. This includes comprehensive repair services and ongoing technical support to ensure uninterrupted operation, with all work performed to meet established quality and reliability standards. The warranty must be fully managed by the contractor and must cover the entire system as delivered, with no exclusions for components or functions. This subcontract is issued under the Department of Veterans Affairs, specifically through the 257-NETWORK Contract Office 17, with performance required at a location in San Antonio, Texas, 78229. The opportunity was posted on August 6, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 811211 indicates the scope falls under medical and dental equipment and supplies repair and maintenance services. The contract does not specify a set-aside type or point of contact, and all bids must align with the requirements outlined for continuous support and service delivery throughout the warranty period.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Calibration and Technical Optimization Services

FA3300 42 Cons Cc

POSTED

DEADLINE

Quality Inspection & Acceptance Sampling

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Quality Assurance and Origin Inspection (Manufacturer-Level)This contract requires the implementation and thorough documentation of a manufacturer-level inspection system that adheres to AS9003 or ISO 9001 quality standards, ensuring rigorous control over production processes and product integrity. A critical component of the requirement is origin verification in full compliance with Buy American Act and DFARS regulations, meaning all materials and components must be sourced and processed in accordance with U.S. domestic content mandates. The work must be performed at Hill AFB, Utah, with all deliverables aligned to federal defense procurement standards. The subcontract is open for responses until August 13, 2026, and falls under NAICS code 811211, indicating a focus on repairs and maintenance activities supporting defense systems. Performance is expected to meet the stringent documentation and traceability demands of the Department of Defense, with no set-aside provisions specified, leaving the opportunity open to all qualified subcontractors.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Medical Item Labeling and Barcoding

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Origin Inspection and Quality Assurance ServicesThe contract requires the performance of origin inspection and quality assurance services for bolts to ensure full compliance with NASM6812 and DLA standards, with all documentation following either AS9003 or ISO 9001 quality management protocols. The scope of work centers on verifying the authenticity, material integrity, and dimensional accuracy of bolts at their source, ensuring they meet stringent aerospace and defense specifications before being accepted into the supply chain. Quality control processes must be rigorously applied and thoroughly documented to maintain traceability and compliance throughout the inspection lifecycle. The contract is classified as a subcontract under the NAICS code 811211 and is issued by the ASC COMMODITIES DIVISION of the Department of Defense. The place of performance is located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. All work must be conducted in accordance with federal defense procurement requirements, and contractors must be prepared to demonstrate adherence to applicable quality systems, document inspection results accurately, and deliver evidence of compliance to DLA upon request.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Labeling and Barcoding ServicesThe contract requires the application of human-readable and machine-readable labels, including data matrix codes and hazardous material markings, on packaged military goods in strict compliance with MIL-STD-129 and OSHA standards. This work is critical for ensuring accurate identification, tracking, and safe handling of military supplies throughout the supply chain, with specific emphasis on durability, legibility, and regulatory adherence for both personnel and automated systems. All labeling must meet federal military specifications and workplace safety guidelines to support operational readiness and compliance. This is a subcontract opportunity under the NAICS code 811211, posted by the Department of Defense through its Construction & Equipment T & IFO EQ office, with performance expected in Tracy, California, at the zip code 95304-5000. The solicitation closed on August 17, 2026, and was originally made available on August 5, 2026. The nature of the work demands precision in labeling protocols, adherence to hazardous material protocols, and the ability to execute high-volume labeling operations reliably and on schedule. Interested parties were required to respond by the deadline specified, with performance obligations tied to military logistics standards and federal compliance frameworks.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Military Marking and Labeling ServicesThe contract requires the application of MIL-STD-129-compliant markings, barcoding, NSN labeling, and hazard communication standards as applicable to military equipment or supplies. All labeling and marking must adhere strictly to federal military specifications to ensure proper identification, tracking, and safety compliance throughout the supply chain. Work is to be performed at Tinker Air Force Base with a zip code of 73145-9031, and the performance is classified as a subcontract under NAICS code 811211. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and is managed by the ASC Supplier Oper OEM Division within the Department of Defense. Interested parties must submit proposals before the deadline through the official DIBBS portal linked in the solicitation.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Unable to Decompose Prime ContractThe contract titled Unable to Decompose Prime Contract was posted on August 6, 2026, with a response deadline of August 21, 2026, and is classified as a subcontract opportunity under the Department of Defense through the ASC COMMODITIES DIVISION. No solicitation number, set-aside type, or NAICS code is provided, and critical details such as the point of contact, office address, and place of performance are incomplete or undefined. Despite the absence of substantive information required to break down the prime contract into subcontract opportunities, the associated link directs users to the DIBBS platform for potential further access. The system encountered a configuration error preventing data decomposition, leaving key procurement specifics undetermined.

POSTED

about 20 hours ago

DEADLINE

HVAC Equipment and Ductwork InstallationThe contract pertains to the installation of HVAC equipment, air handling systems, ductwork, and associated controls for heating and cooling distribution, under the NAICS code 238220 for HVAC installation services. It is structured as a subcontract and is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 6, 2026, with a response deadline of August 18, 2026, and the performance location is not specified beyond the overarching agency jurisdiction. The work involves comprehensive mechanical system integration requiring precise coordination of equipment placement, airflow design, and control system implementation to ensure optimal environmental regulation across designated facilities. All bids must comply with federal subcontracting requirements and be submitted through the designated DIBBS portal prior to the stipulated deadline.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 20 hours ago

DEADLINE

Roofing System InstallationThe contract pertains to the supply and installation of low-slope membrane roofing systems, encompassing all necessary components such as insulation, vapor barriers, and detailed flashing work to ensure watertight performance and durability. The work is classified under NAICS code 238160, indicating it falls within the roofing contractors category, and is structured as a subcontract under the Department of Defense’s ASC Commodities Division. Performance is expected to occur at an unspecified location, with no detailed place of performance provided, and the solicitation remains open for response until August 18, 2026. The posting date indicates the opportunity was made available on August 6, 2026, and interested parties must submit their proposals by the deadline to be considered. All technical specifications and installation standards are implied to align with industry best practices for commercial and institutional low-slope roofing applications.

Roofing Contractors

POSTED

about 20 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement pertains to the formwork construction, reinforcement, and pouring of structural concrete for foundations, slabs, and walls, covering all associated activities required to meet engineering specifications and structural integrity standards. Work is expected to be performed under a subcontract arrangement within the scope of NAICS code 238110, which classifies the activity as concrete work for building construction. The solicitation was posted on August 6, 2026, with responses due by August 18, 2026, under the oversight of the ASC Commodities Division within the Department of Defense. While the exact location of performance remains unspecified, the project is tied to federal defense infrastructure requirements. All parties must comply with applicable regulations and standards governing concrete placement and safety protocols for military-related construction.

Poured Concrete Foundation and Structure Contractors

POSTED

about 20 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract pertains to the installation of potable water, sanitary waste, and vent piping systems tailored to meet local plumbing codes and specific project requirements. This work is classified under NAICS code 238220, indicating it falls within the plumbing, heating, and air-conditioning contracting sector, and is structured as a subcontract under the Department of Defense’s ASC Commodities Division. The work must be executed in strict compliance with applicable regulations and detailed project specifications to ensure safety, functionality, and regulatory adherence. The solicitation was posted on August 6, 2026, with a response deadline set for August 18, 2026, providing potential contractors with a twelve-day window to submit proposals. The place of performance and exact location details are not specified in the available data, suggesting the work may be distributed across multiple sites or will be determined upon award. Interested parties must access the full solicitation through the provided DIBBS link to obtain all technical, administrative, and compliance requirements necessary for submission.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 20 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract pertains to the installation of electrical systems for commercial or infrastructure projects under the title Electrical Installation and Wiring Services, with NAICS code 238210, indicating classification under Electrical Contracting. It encompasses all aspects of electrical work including the deployment of conduits, wiring, lighting fixtures, and power distribution components necessary to support facility operations. The work is being procured as a subcontract under the Department of Defense, specifically through the ASC Commodities Division, and the performance location details are not specified, suggesting potential flexibility in site assignment across multiple locations. The solicitation was posted on August 6, 2026, with a response deadline of August 18, 2026, allowing interested parties a twelve-day window to submit proposals. No set-aside provisions are indicated, meaning the opportunity is open to all qualified vendors regardless of business size or ownership characteristics. The contract is not tied to a specific geographic location, and there is no designated point of contact provided in the data, requiring proposers to rely on the official DIBBS portal link for submission details and additional instructions. All work must align with federal standards for electrical installations and be executed to meet the operational demands of the end-user, likely to support defense-related infrastructure or facilities.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-XC33

This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Department of Defense’s DLA Aviation, Commodity Division, for the procurement of 90 units of a critical application cable assembly identified by NSN 5995-01-628-8998, with a guaranteed minimum order of 22 units per year and a maximum order limit of 90 units per delivery. The contract has a firm fixed price structure with no variance allowed in quantity, and delivery is required within 350 days after order award. The total estimated contract value is capped at $350,000, which serves as the aggregate spending limit across all orders issued over the five-year base period, during which orders may be placed for up to 1,825 days after the award date. The item is specified as a Mercury Mission Systems LLC part number 4585-05000-15-301, with strict prohibitions against the intentional introduction of mercury or mercury-containing compounds into the hardware, except for approved functional uses in batteries, fluorescent lights, weapons systems, and NAVSEA-specified reagents, which must include secondary containment and shock-proof design per NAVSEA 5100-003D. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, and technical compliance is enforced through sampling methods in accordance with MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must adhere to MIL-STD-2073-1E with specific parameters for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special markings required. Palletization must conform to DLA Packaging Requirements RP001. Inspection and acceptance occur at destination, and the contractor must maintain a government-approved inspection system, with Product Verification Testing conducted by the government at a designated lab prior to shipment; failure results in rejection of the entire lot. The contractor is also required to comply with stringent regulatory provisions including restrictions on hexavalent chromium, toxic material disposal, Buy American preferences, prohibitions on procurement from Xinjiang, antit

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-XA86

This contract solicits the procurement of 358 machine bolts with NSN 5306-01-096-5596 under solicitation number SPE4A6-26-R-XA86, issued by the Defense Logistics Agency’s Commodities Division under the Department of Defense. The delivery deadline is set at 736 days after contract award, with responses due by August 18, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, inspection at origin, configuration change management, and export control of technical data are strictly governed by specific DLA requirements including RQ002, RQ009, and RQ032. The technical data associated with this item is subject to ITAR or EAR, and its disclosure to foreign persons—even within the United States—is prohibited without prior authorization. Contractors must be approved by DLA, hold valid US/Canada Joint Certification Program status, and have completed mandatory training and questionnaire compliance to access export-controlled data. Documentation for source approval, removal of government identification from non-accepted items, and bare item marking are required. The point of contact for inquiries is Ashley Hardy, reachable via email and phone.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, RADI

Solicitation # SPE4A6-26-R-XC37

This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Defense Logistics Agency Aviation, Commodity Division, for the procurement of 140 cable assemblies, Radi, identified by NSN 5995-01-675-7639 and manufacturer part number 12006-7181-A30 from L3Harris Technologies, Inc. The base period spans five years with an estimated annual demand of 140 units and a guaranteed minimum quantity of 35 units per year, with a total contract ceiling of $350,000. Delivery orders may be issued for up to 140 units per order, with a required delivery window of 245 days after receipt of order, under FOB origin terms. The contract is firm fixed price with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the government retaining the right to reject the entire lot if product verification test samples fail at a government-designated lab; shipment is prohibited until acceptable test results are received unless otherwise directed. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, unit containers, and labeling directives. Special marking requirements mandate bold text on external packages stating “Product Verification Test Samples - Do Not Post to Stock” along with contract and lot numbers, and the special marking code is set to zero, indicating no additional markings. Packaging and palletization must adhere to DLA’s RP001 requirements, while documentation must include a hard copy of the system of record receiving report. Sampling and quality control follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. All technical and quality requirements referenced by 'R' or 'I' numbers are incorporated from the DLA Master List, and the contractor must comply with regulations governing the removal of government identification from non-accepted supplies, physical item marking, and documentation for source approval requests. The contract includes mandatory DFARS clauses on whistleblower rights, antiterrorism training, litigation support restrictions, subcontracting with state sponsors of terrorism, hazard labeling, and payment instructions via WAWF. Offer

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

U.S. Flag Ocean TransportThe contract specifies the ocean transportation of defense supplies using U.S.-flagged vessels, strictly adhering to the Defense Federal Acquisition Regulation Supplement section 252.247-7024, which mandates the use of American-owned and crewed ships for military cargo. The work is to be performed with a primary place of performance in San Diego, California, and falls under the NAICS code 483111 for ocean freight transportation. This is a subcontract opportunity issued by the ASC Commodities Division of the Department of Defense, with responses required by August 13, 2026, and the solicitation posted on August 5, 2026. All transportation services must comply with federal regulations ensuring national security and maritime sovereignty, making vessel ownership, flag status, and crew nationality critical factors in vendor eligibility.

Deep Sea Freight Transportation

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls outlined in NIST SP 800-171 to safeguard Controlled Unclassified Information related to defense contracts, ensuring full compliance with DFARS cyber incident reporting obligations. This subcontract is focused on securing Covered Defense Information through the establishment of robust technical, administrative, and physical safeguards aligned with federal standards, with performance specifically tied to the location in San Diego, CA, 92136-3581. The effort is governed under NAICS code 541512, indicating it involves computer systems design and related services, and is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and must include demonstrated capability to meet all required security controls, maintain compliance over time, and properly report any cyber incidents as mandated by regulation.

Computer Systems Design Services

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract is for packaging and preservation services requiring strict adherence to military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all supplies are securely packaged, preserved, and labeled with compliant barcode systems for defense logistics. This subcontract is managed by the ASC Commodities Division under the Department of Defense, with performance required at a specified location in San Diego, California, with a ZIP code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with the NAICS code 561910 indicating it falls under Other Support Activities for Transportation. The work demands precision in material handling and documentation to meet federal military specifications, with all packaging and labeling rigorously verified for compatibility with DoD supply chain systems.

Packaging and Labeling Services

POSTED

DEADLINE