This Subcontract opportunity from Texas was posted on January 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Inspection & Compliance Testing Services

Closed

State & Local

Submission Closed01/28/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

POSTED

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Critical Application Inspection and Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected contractor will perform first article testing on a prototype unit to ensure validation against Design 25-74076-3. This process involves utilizing load testing, tensile strength testers, or non-destructive inspection tools, with the final deliverable being a comprehensive test report due within 30 calendar days of the contract date. Performance will take place in Tracy, California, under NAICS code 541380. To qualify, contractors must adhere to SAE AS9003 or ISO 9001 quality standards and maintain ITAR/EAR authorization for the secure handling of technical data. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality InspectionThis subcontract for Non-Destructive Testing (NDT) and Quality Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized inspections and testing in accordance with QAP 16236 and SQAP009382983, specifically focusing on casting integrity checks and dimensional verification against TDP Rev B Gen 3. The selected provider is responsible for delivering certified inspection reports and comprehensive quality assurance documentation. Performance will take place at Hill AFB, and the contractor must hold ISO 17025 or an equivalent laboratory certification. Additionally, JCP Certification is required to ensure authorized access to necessary technical data. This opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Quality Assurance & CertificationThe Aerospace Quality Assurance and Certification subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves performing final inspections and airworthiness testing for prime contractors. The selected provider must verify supply chain traceability according to DLAD Procurement Note C03, validate bare item marking per RQ046, and execute certification of compliance with CDRL-FAACERTCOM-25015. The primary deliverable for this engagement is the provision of official FAA Airworthiness Approval documentation. To qualify for this role, the contractor must provide an FAA-certified inspector or a Designated Engineering Representative. The work is designated under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026, to meet the requirements of this specialized quality assurance project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Cable Testing and Certification LaboratoryThis subcontract for the Electrical Cable Testing and Certification Laboratory supports the DLA Weapons Support Maritime Supply Chain by performing First Article Testing for prime contractors. The selected provider will utilize certified electrical testing laboratory equipment to conduct technical evaluations on sample units, ensuring strict compliance with MIL-DTL-55021 and NEMA WC 55021 standards. The scope of work includes documenting all test results and providing formal certification of compliance. The contractor is required to deliver the final First Article Test report and the certified test unit within 150 days. Performance for this effort is located in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Aerospace NDT Inspection and CertificationThis subcontract for Aerospace NDT Inspection and Certification involves providing non-destructive testing and inspection services for prime contractors working on Defense Logistics Agency aircraft component contracts. The selected provider will execute testing on critical application items in strict accordance with the DLA Master List of Technical and Quality Requirements and RQ040, utilizing specialized equipment to certify the material integrity of both production units and First Article Tests. To qualify for this engagement, the contractor must hold NDT Accreditation per RQ040 and is responsible for delivering comprehensive NDT Inspection Reports and Certifications of Compliance. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Non-Destructive Testing (NDT) & FAT SupportThis subcontract involves providing Aerospace Non-Destructive Testing and First Article Testing support for prime contractors working on DLA Weapons Support ASC aircraft projects. The selected provider will perform NDT and dimensional verification on two initial units to ensure strict compliance with reference drawings, ultimately delivering validated units and certified inspection reports to Robins Air Force Base. To qualify for this engagement, the contractor must hold NDT accreditation and maintain ISO 9001:2015 certification. The project falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing for Vehicular ShelvesThis subcontract involves performing First Article Testing for vehicular shelves to support the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. The contractor is responsible for executing test protocols in accordance with Quality Assurance Provision 19200 13048707 and utilizing precision measurement equipment to validate Drawing NR 19200 13048707. The scope of work requires the verification of critical, major, and minor attributes against the Technical Data Package. The project deliverables include a certified First Article Testing report and an approved first article unit. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days

AI Contract Overview

The Dallas Area Rapid Transit agency in Texas is seeking a subcontractor to provide quality inspection and compliance testing services for compression rings. The primary objective of this contract is to secure third-party verification through rigorous testing and certification to ensure that all components adhere to established technical specifications, material standards, and merchantable quality requirements. This opportunity was posted on January 21, 2026, with a response deadline of January 28, 2026. The project falls under NAICS code 541380, focusing on specialized testing and inspection services to maintain safety and operational integrity.

General Info

Agency

Texas → Dallas Area Rapid Transit

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2097610.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RING, COMPRESSION,HIGH PRESSURE PISTON | 2097610

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 21

subcontract

Response DeadlineJan 28

Deadline has passed

Submission Closed

01/28/2026, 02:00:00 PM CST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Third-party inspection, testing, and certification of the compression ring to ensure compliance with technical specifications, material standards, and merchantable quality.

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Quality Inspection & Compliance Testing Services

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Texas → Dallas Area Rapid Transit

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open